b43: N-PHY: enable support for PHYs rev 3 and higher
PATCH 1/1 b43: N-PHY: enable support for PHYs rev 3 and higher
---
John: can we still make it for 2.6.38 merge? It was tested with 14e4:432b, support seems to be on the same level as for PHYs 1 and 2.
--- drivers/net/wireless/b43/main.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/net/wireless/b43/main.c +1 -1
@@ -4056,7 +4056,7 @@ static int b43_phy_versioning(struct b43_wldev *dev)break ;#ifdef CONFIG_B43_PHY_N case B43_PHYTYPE_N : -if (phy_rev >2 ) +if (phy_rev >9 ) unsupported =1 ;break ;#endif
Signature · 1 line
1.6.3.3
PATCH 1/1 b43: N-PHY: enable support for PHYs rev 3 and higher
W dniu 21 grudnia 2010 21:29 u?ytkownik Rafa? Mi?ecki <[email protected]> napisa?:
Quoted 4 lines
Signed-off-by Rafa? Mi?ecki <[email protected]>---
John: can we still make it for 2.6.38 merge? It was tested with 14e4:432b, support seems to be on the same level as for PHYs 1 and 2.
John, I dont see patches for rev3+ in wireless-testing. Any problems with them?
It means:
[PATCH 1/4] b43: use correct firmware for newer cores [PATCH 2/4 v2] b43: N-PHY: implement radio 2056 init steps [PATCH 3/4] b43: N-PHY: add init tables for 2056 radio [PATCH 4/4] b43: N-PHY: avoid PHY hangs for rev 3 and 4
[PATCH 1/2] b43: N-PHY: use correct channel tables for rev4+ [PATCH 2/2 v2] b43: N-PHY: update 2056 radio on channel switch on rev3+ and this one.
Signature · 1 line
Rafa?
PATCH 1/1 b43: N-PHY: enable support for PHYs rev 3 and higher
Quoted 15 lines · Rafał Miłecki
W dniu 21 grudnia 2010 21:29 użytkownik Rafał Miłecki
Quoted 4 lines · <[email protected]> napisał:
Signed-off-by Rafał Miłecki <[email protected]>---
John: can we still make it for 2.6.38 merge? It was tested with 14e4:432b, support seems to be on the same level as for PHYs 1 and 2.John, I dont see patches for rev3+ in wireless-testing. Any problems with them?
It means:
[PATCH 1/4] b43: use correct firmware for newer cores [PATCH 2/4 v2] b43: N-PHY: implement radio 2056 init steps [PATCH 3/4] b43: N-PHY: add init tables for 2056 radio [PATCH 4/4] b43: N-PHY: avoid PHY hangs for rev 3 and 4
Quoted 3 lines
[PATCH 1/2] b43: N-PHY: use correct channel tables for rev4+ [PATCH 2/2 v2] b43: N-PHY: update 2056 radio on channel switch on rev3+ and this one.
John,
I have been testing these patches with a 14e4:432b device for at least two weeks. With them, the driver still does not handle WPA/WPA2 encryption and falls over with OFDM rates, but it is rock solid with WEP encryption and at 11 Mb/s. Rafał and I have some ideas why the limitations, but the holidays have interfered with debugging.
Larry
PATCH 1/1 b43: N-PHY: enable support for PHYs rev 3 and higher
Quoted 22 lines · Larry Finger
Quoted 15 lines · Rafa? Mi?ecki
W dniu 21 grudnia 2010 21:29 u?ytkownik Rafa? Mi?ecki <[email protected]> napisa?:
Quoted 4 lines
Signed-off-by Rafa? Mi?ecki <[email protected]>---
John: can we still make it for 2.6.38 merge? It was tested with 14e4:432b, support seems to be on the same level as for PHYs 1 and 2.John, I dont see patches for rev3+ in wireless-testing. Any problems with them?
It means:
[PATCH 1/4] b43: use correct firmware for newer cores [PATCH 2/4 v2] b43: N-PHY: implement radio 2056 init steps [PATCH 3/4] b43: N-PHY: add init tables for 2056 radio [PATCH 4/4] b43: N-PHY: avoid PHY hangs for rev 3 and 4Quoted 3 lines
[PATCH 1/2] b43: N-PHY: use correct channel tables for rev4+ [PATCH 2/2 v2] b43: N-PHY: update 2056 radio on channel switch on rev3+ and this one.
John,
Quoted 7 lines
I have been testing these patches with a 14e4:432b device for at least two weeks. With them, the driver still does not handle WPA/WPA2 encryption and falls over with OFDM rates, but it is rock solid with WEP encryption and at 11 Mb/s. Rafa? and I have some ideas why the limitations, but the holidays have interfered with debugging.
Larry
And with merging...
I hope to get caught-up soon.
John
Signature · 2 lines
John W. Linville Someday the world will need a hero, and you linville at tuxdriver.com might be all we have. Be ready.
PATCH 1/1 b43: N-PHY: enable support for PHYs rev 3 and higher
Quoted 29 lines · John W. Linville
Quoted 28 lines · Larry Finger
Quoted 15 lines · Rafał Miłecki
W dniu 21 grudnia 2010 21:29 użytkownik Rafał Miłecki
Quoted 4 lines · <[email protected]> napisał:
Signed-off-by Rafał Miłecki <[email protected]>---
John: can we still make it for 2.6.38 merge? It was tested with 14e4:432b, support seems to be on the same level as for PHYs 1 and 2.John, I dont see patches for rev3+ in wireless-testing. Any problems with them?
It means:
[PATCH 1/4] b43: use correct firmware for newer cores [PATCH 2/4 v2] b43: N-PHY: implement radio 2056 init steps [PATCH 3/4] b43: N-PHY: add init tables for 2056 radio [PATCH 4/4] b43: N-PHY: avoid PHY hangs for rev 3 and 4Quoted 3 lines
[PATCH 1/2] b43: N-PHY: use correct channel tables for rev4+ [PATCH 2/2 v2] b43: N-PHY: update 2056 radio on channel switch on rev3+ and this one.
John,
I have been testing these patches with a 14e4:432b device for at least two weeks. With them, the driver still does not handle WPA/WPA2 encryption and falls over with OFDM rates, but it is rock solid with WEP encryption and at 11 Mb/s. Rafał and I have some ideas why the limitations, but the holidays have interfered with debugging.
Quoted 5 lines
Quoted 1 line
Larry
And with merging...
I hope to get caught-up soon.
I hope there are some rtlwifi/rtl8192ce updates there as well. I'll wait for some new merges before I bug you about the specific patches.
Larry