Skip to contentSkip to conversation

WiFi setup

DISCUSSION Gary Thomas 1 participant 1 message Jan 17, 2011

lore
Share & tools
lore
#0 lore raw

Pardon me if this is not the best place to ask about this, but since I'm building using Poky... Feel free to send me elsewhere (with pointers!) if there's a more appropriate list.

I now have a WiFi USB dongle which I think the kernel is happy with, at least I get the 'wlan0' device running. I'm not running network manager, I'd like to just get it going "raw" via ifup, etc.

Sadly, when I try it, it doesn't work. Here's what I see:

  root@cobra3530p60:~# ifup wlan0
  phy0 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin'.
  rt73usb 2-1.2.4:1.0: firmware: requesting rt73.bin
  phy0 -> rt2x00lib_request_firmware: Info - Firmware detected - version: 1.7.
  phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 102.
  phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 4, CWmax: 5, Aifs: 2, TXop: 188.
  phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 5, CWmax: 10, Aifs: 3, TXop: 0.
  phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 5, CWmax: 10, Aifs: 7, TXop: 0.
  ADDRCONF(NETDEV_UP): wlan0: link is not ready
  udhcpc (v1.17.3) started
  Setting IP address 0.0.0.0 on wlan0
  Sending discover...
  Read error: Network is down, reopening socket
  phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 102.
  phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 4, CWmax: 5, Aifs: 2, TXop: 188.
  phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 5, CWmax: 10, Aifs: 3, TXop: 0.
  phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 5, CWmax: 10, Aifs: 7, TXop: 0.
  Sending discover...
  Sending discover...
  No lease, failing
  root@cobra3530p60:~# phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47.
  phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94.
  phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0.
  phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0.
  root@cobra3530p60:~# iwconfig wlan0
  wlan0     IEEE 802.11bg  ESSID:"test adhoc"
            Mode:Ad-Hoc  Frequency:2.412 GHz  Cell: B6:42:15:B2:E8:91
            Tx-Power=18 dBm
            Retry  long limit:7   RTS thr:off   Fragment thr:off
            Encryption key:935E-27E7-CAB5-DA1B-1D6A-B183-71AE-26E7-7859-1311-D87D-FFB3-7859-1311-D87D-FFB3
            Power Management:on

I have the default settings in /etc/network/interfaces for wlan0:
# Wireless interfaces
iface wlan0 inet dhcp
wireless_mode managed
wireless_essid any
wpa-driver wext
wpa-conf /etc/wpa_supplicant.conf

I did not change /etc/wpa_supplicant.conf

I've not found much in the way of documentation on how this works, but I think the [first] real problem is that the interface is in the wrong mode - Ad Hoc instead of Managed.

Does anyone know what I need to do to get this going (I think I know how to set the details of things like my AP SSID and keys), I just don't think I'm getting that far.

Thanks for any ideas

Signature · 4 lines
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------