WiFi setup
Pardon me if this is not the best place to ask about this, but since I'm building using Poky... Feel free to send me elsewhere (with pointers!) if there's a more appropriate list.
I now have a WiFi USB dongle which I think the kernel is happy with, at least I get the 'wlan0' device running. I'm not running network manager, I'd like to just get it going "raw" via ifup, etc.
Sadly, when I try it, it doesn't work. Here's what I see:
root@cobra3530p60:~# ifup wlan0 phy0 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin'. rt73usb 2-1.2.4:1.0: firmware: requesting rt73.bin phy0 -> rt2x00lib_request_firmware: Info - Firmware detected - version: 1.7. phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 102. phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 4, CWmax: 5, Aifs: 2, TXop: 188. phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 5, CWmax: 10, Aifs: 3, TXop: 0. phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 5, CWmax: 10, Aifs: 7, TXop: 0. ADDRCONF(NETDEV_UP): wlan0: link is not ready udhcpc (v1.17.3) started Setting IP address 0.0.0.0 on wlan0 Sending discover... Read error: Network is down, reopening socket phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 102. phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 4, CWmax: 5, Aifs: 2, TXop: 188. phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 5, CWmax: 10, Aifs: 3, TXop: 0. phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 5, CWmax: 10, Aifs: 7, TXop: 0. Sending discover... Sending discover... No lease, failing root@cobra3530p60:~# phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47. phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94. phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0. phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0.
root@cobra3530p60:~# iwconfig wlan0
wlan0 IEEE 802.11bg ESSID:"test adhoc"
Mode:Ad-Hoc Frequency:2.412 GHz Cell: B6:42:15:B2:E8:91
Tx-Power=18 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:935E-27E7-CAB5-DA1B-1D6A-B183-71AE-26E7-7859-1311-D87D-FFB3-7859-1311-D87D-FFB3
Power Management:onI have the default settings in /etc/network/interfaces for wlan0:
# Wireless interfaces
iface wlan0 inet dhcp
wireless_mode managed
wireless_essid any
wpa-driver wext
wpa-conf /etc/wpa_supplicant.conf
I did not change /etc/wpa_supplicant.conf
I've not found much in the way of documentation on how this works, but I think the [first] real problem is that the interface is in the wrong mode - Ad Hoc instead of Managed.
Does anyone know what I need to do to get this going (I think I know how to set the details of things like my AP SSID and keys), I just don't think I'm getting that far.
Thanks for any ideas
Signature · 4 lines
------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------