Skip to contentSkip to conversation

poky custom kernel misconfiguration

DISCUSSION Gerard van den Bosch 2 participants 5 messages Feb 22, 2011

lore
Share & tools
lore
#0 lore raw

Hello,

I am trying to build Poky for my hardware platform with a custom kernel.
But when I build Poky it crashes by not finding a defconfig for kernel 2.6.33.2-r2 which isn't the kernel I preferred to build.

This is what I have done:

Copied local.conf.sample to local.conf and changed the following:
BB_NUMBER_THREADS = "2"
PARALLEL_MAKE = "-j 2"
MACHINE ?= "tao3530"

Because this is a new machine I have generated a tao3530.conf by copying the beagleboard.conf because this is a similar device. I have changed the kernel recipe to:
PREFERRED_PROVIDER_virtual/kernel = "TAO-PSP"

The kernel I used is normally used in Ångström for this board, but because Ångström is also OpenEmbedded based I assumed I could use the kernel in Poky also.

In the meta/package/linux directory I made the TAO-PSP-2.6.32 directory.
In this directory I placed the tar.bz2 of my kernel and the defconfig for my hardware platform.

I have generated a bb file containing the following:

SECTION = "kernel"
DESCRIPTION = "TAO3530 Linux kernel"
LICENSE = "GPL"

KERNEL_OUTPUT = "arch/${ARCH}/boot/${KERNEL_IMAGETYPE}"

inherit kernel

COMPATIBLE_MACHINE = "tao3530"

PR = "r1"

SRC_URI = "file://TAO-PSP-03000106.tar.bz2 \
file://defconfig"

S = "${WORKDIR}/linux-2.6.32"

Can someone point me out what I did wrong or what I have forgot to configure or where to look to find out what I did wrong.

Regards,
Gerard

#1 lore raw
Quoted 40 lines · Gerard van den Bosch

Hello,

I am trying to build Poky for my hardware platform with a custom kernel. But when I build Poky it crashes by not finding a defconfig for kernel 2.6.33.2-r2 which isn't the kernel I preferred to build.

This is what I have done:

Copied local.conf.sample to local.conf and changed the following:
BB_NUMBER_THREADS = "2"
PARALLEL_MAKE = "-j 2"
MACHINE ?= "tao3530"

Because this is a new machine I have generated a tao3530.conf by copying the beagleboard.conf because this is a similar device.
I have changed the kernel recipe to:
PREFERRED_PROVIDER_virtual/kernel = "TAO-PSP"

The kernel I used is normally used in Ångström for this board, but because Ångström is also OpenEmbedded based I assumed I could use the kernel in Poky also.

In the meta/package/linux directory I made the TAO-PSP-2.6.32 directory. In this directory I placed the tar.bz2 of my kernel and the defconfig for my hardware platform.

I have generated a bb file containing the following:

SECTION = "kernel"
DESCRIPTION = "TAO3530 Linux kernel"
LICENSE = "GPL"

KERNEL_OUTPUT = "arch/${ARCH}/boot/${KERNEL_IMAGETYPE}"

inherit kernel

COMPATIBLE_MACHINE = "tao3530"

PR = "r1"

Quoted 7 lines

SRC_URI = "file://TAO-PSP-03000106.tar.bz2 \
file://defconfig"

S = "${WORKDIR}/linux-2.6.32"

Can someone point me out what I did wrong or what I have forgot to configure or where to look to find out what I did wrong.

What did you call the .bb file?

Cheers,

Richard

#2 lore raw
Quoted 46 lines · Richard Purdie
Quoted 45 lines · Gerard van den Bosch

Hello,

I am trying to build Poky for my hardware platform with a custom kernel. But when I build Poky it crashes by not finding a defconfig for kernel 2.6.33.2-r2 which isn't the kernel I preferred to build.

This is what I have done:

Copied local.conf.sample to local.conf and changed the following:
BB_NUMBER_THREADS = "2"
PARALLEL_MAKE = "-j 2"
MACHINE ?= "tao3530"

Because this is a new machine I have generated a tao3530.conf by copying the beagleboard.conf because this is a similar device.
I have changed the kernel recipe to:
PREFERRED_PROVIDER_virtual/kernel = "TAO-PSP"

The kernel I used is normally used in Ångström for this board, but because Ångström is also OpenEmbedded based I assumed I could use the kernel in Poky also.

In the meta/package/linux directory I made the TAO-PSP-2.6.32 directory. In this directory I placed the tar.bz2 of my kernel and the defconfig for my hardware platform.

I have generated a bb file containing the following:

SECTION = "kernel"
DESCRIPTION = "TAO3530 Linux kernel"
LICENSE = "GPL"

KERNEL_OUTPUT = "arch/${ARCH}/boot/${KERNEL_IMAGETYPE}"

inherit kernel

COMPATIBLE_MACHINE = "tao3530"

PR = "r1"

SRC_URI = "file://TAO-PSP-03000106.tar.bz2 \
file://defconfig"

S = "${WORKDIR}/linux-2.6.32"

Quoted 8 lines
Quoted 2 lines

Can someone point me out what I did wrong or what I have forgot to configure or where to look to find out what I did wrong.

What did you call the .bb file?

Cheers,

Richard

Sorry for the reply mistake, I am new to mailinglists.

The name of the bb file is: TAO-PSP-2.6.32.bb

Regards,
Gerard

#3 lore raw
Quoted 51 lines · Gerard van den Bosch
Quoted 50 lines · Richard Purdie
Quoted 40 lines · Gerard van den Bosch

Hello,

I am trying to build Poky for my hardware platform with a custom kernel. But when I build Poky it crashes by not finding a defconfig for kernel 2.6.33.2-r2 which isn't the kernel I preferred to build.

This is what I have done:

Copied local.conf.sample to local.conf and changed the following:
BB_NUMBER_THREADS = "2"
PARALLEL_MAKE = "-j 2"
MACHINE ?= "tao3530"

Because this is a new machine I have generated a tao3530.conf by copying the beagleboard.conf because this is a similar device.
I have changed the kernel recipe to:
PREFERRED_PROVIDER_virtual/kernel = "TAO-PSP"

The kernel I used is normally used in Ångström for this board, but because Ångström is also OpenEmbedded based I assumed I could use the kernel in Poky also.

In the meta/package/linux directory I made the TAO-PSP-2.6.32 directory. In this directory I placed the tar.bz2 of my kernel and the defconfig for my hardware platform.

I have generated a bb file containing the following:

SECTION = "kernel"
DESCRIPTION = "TAO3530 Linux kernel"
LICENSE = "GPL"

KERNEL_OUTPUT = "arch/${ARCH}/boot/${KERNEL_IMAGETYPE}"

inherit kernel

COMPATIBLE_MACHINE = "tao3530"

PR = "r1"

Quoted 7 lines

SRC_URI = "file://TAO-PSP-03000106.tar.bz2 \
file://defconfig"

S = "${WORKDIR}/linux-2.6.32"

Can someone point me out what I did wrong or what I have forgot to configure or where to look to find out what I did wrong.

What did you call the .bb file?

Quoted 7 lines
Quoted 4 lines

Cheers,

Richard

Sorry for the reply mistake, I am new to mailinglists.

The name of the bb file is: TAO-PSP-2.6.32.bb

Try calling it TAO-PSP_2.6.32.bb as "_" is the separator between the name and the version.

Cheers,

Richard

#4 lore raw
Quoted 58 lines · Richard Purdie
Quoted 57 lines · Gerard van den Bosch
Quoted 46 lines · Richard Purdie
Quoted 45 lines · Gerard van den Bosch

Hello,

I am trying to build Poky for my hardware platform with a custom kernel. But when I build Poky it crashes by not finding a defconfig for kernel 2.6.33.2-r2 which isn't the kernel I preferred to build.

This is what I have done:

Copied local.conf.sample to local.conf and changed the following:
BB_NUMBER_THREADS = "2"
PARALLEL_MAKE = "-j 2"
MACHINE ?= "tao3530"

Because this is a new machine I have generated a tao3530.conf by copying the beagleboard.conf because this is a similar device.
I have changed the kernel recipe to:
PREFERRED_PROVIDER_virtual/kernel = "TAO-PSP"

The kernel I used is normally used in Ångström for this board, but because Ångström is also OpenEmbedded based I assumed I could use the kernel in Poky also.

In the meta/package/linux directory I made the TAO-PSP-2.6.32 directory. In this directory I placed the tar.bz2 of my kernel and the defconfig for my hardware platform.

I have generated a bb file containing the following:

SECTION = "kernel"
DESCRIPTION = "TAO3530 Linux kernel"
LICENSE = "GPL"

KERNEL_OUTPUT = "arch/${ARCH}/boot/${KERNEL_IMAGETYPE}"

inherit kernel

COMPATIBLE_MACHINE = "tao3530"

PR = "r1"

SRC_URI = "file://TAO-PSP-03000106.tar.bz2 \
file://defconfig"

S = "${WORKDIR}/linux-2.6.32"

Quoted 8 lines
Quoted 2 lines

Can someone point me out what I did wrong or what I have forgot to configure or where to look to find out what I did wrong.

What did you call the .bb file?

Cheers,

Richard

Sorry for the reply mistake, I am new to mailinglists.

Quoted 10 lines
Quoted 1 line

The name of the bb file is: TAO-PSP-2.6.32.bb

Try calling it TAO-PSP_2.6.32.bb as "_" is the separator between the name and the version.

Cheers,

Richard

Thanks, it is selecting the right kernel now.

Regards,
Gerard