poky custom kernel misconfiguration
Hello,
I am trying to build Poky for my hardware platform with a custom kernel.
But when I build Poky it crashes by not finding a defconfig for kernel 2.6.33.2-r2 which isn't the kernel I preferred to build.
This is what I have done:
Copied local.conf.sample to local.conf and changed the following:BB_NUMBER_THREADS = "2"PARALLEL_MAKE = "-j 2"
MACHINE ?= "tao3530"
Because this is a new machine I have generated a tao3530.conf by copying the beagleboard.conf because this is a similar device. I have changed the kernel recipe to:
PREFERRED_PROVIDER_virtual/kernel = "TAO-PSP"
The kernel I used is normally used in Ångström for this board, but because Ångström is also OpenEmbedded based I assumed I could use the kernel in Poky also.
In the meta/package/linux directory I made the TAO-PSP-2.6.32 directory.
In this directory I placed the tar.bz2 of my kernel and the defconfig for my hardware platform.
I have generated a bb file containing the following:
SECTION = "kernel"
DESCRIPTION = "TAO3530 Linux kernel"
LICENSE = "GPL"
KERNEL_OUTPUT = "arch/${ARCH}/boot/${KERNEL_IMAGETYPE}"
inherit kernel
COMPATIBLE_MACHINE = "tao3530"
PR = "r1"
SRC_URI = "file://TAO-PSP-03000106.tar.bz2 \
file://defconfig"
S = "${WORKDIR}/linux-2.6.32"
Can someone point me out what I did wrong or what I have forgot to configure or where to look to find out what I did wrong.
Regards,
Gerard
Quoted 40 lines · Gerard van den Bosch
Hello,
I am trying to build Poky for my hardware platform with a custom kernel. But when I build Poky it crashes by not finding a defconfig for kernel 2.6.33.2-r2 which isn't the kernel I preferred to build.
This is what I have done:
Copied local.conf.sample to local.conf and changed the following:
BB_NUMBER_THREADS= "2"PARALLEL_MAKE= "-j 2"
MACHINE ?= "tao3530"Because this is a new machine I have generated a tao3530.conf by copying the beagleboard.conf because this is a similar device.
I have changed the kernel recipe to:
PREFERRED_PROVIDER_virtual/kernel = "TAO-PSP"The kernel I used is normally used in Ångström for this board, but because Ångström is also OpenEmbedded based I assumed I could use the kernel in Poky also.
In the meta/package/linux directory I made the TAO-PSP-2.6.32 directory. In this directory I placed the tar.bz2 of my kernel and the defconfig for my hardware platform.
I have generated a bb file containing the following:
SECTION = "kernel"
DESCRIPTION = "TAO3530 Linux kernel"
LICENSE = "GPL"
KERNEL_OUTPUT= "arch/${ARCH}/boot/${KERNEL_IMAGETYPE}"inherit kernel
COMPATIBLE_MACHINE= "tao3530"PR = "r1"
Quoted 7 lines
SRC_URI= "file://TAO-PSP-03000106.tar.bz2 \
file://defconfig"S = "${WORKDIR}/linux-2.6.32"
Can someone point me out what I did wrong or what I have forgot to configure or where to look to find out what I did wrong.
What did you call the .bb file?
Cheers,
Richard
Quoted 46 lines · Richard Purdie
Quoted 45 lines · Gerard van den Bosch
Hello,
I am trying to build Poky for my hardware platform with a custom kernel. But when I build Poky it crashes by not finding a defconfig for kernel 2.6.33.2-r2 which isn't the kernel I preferred to build.
This is what I have done:
Copied local.conf.sample to local.conf and changed the following:
BB_NUMBER_THREADS= "2"PARALLEL_MAKE= "-j 2"
MACHINE ?= "tao3530"Because this is a new machine I have generated a tao3530.conf by copying the beagleboard.conf because this is a similar device.
I have changed the kernel recipe to:
PREFERRED_PROVIDER_virtual/kernel = "TAO-PSP"The kernel I used is normally used in Ångström for this board, but because Ångström is also OpenEmbedded based I assumed I could use the kernel in Poky also.
In the meta/package/linux directory I made the TAO-PSP-2.6.32 directory. In this directory I placed the tar.bz2 of my kernel and the defconfig for my hardware platform.
I have generated a bb file containing the following:
SECTION = "kernel"
DESCRIPTION = "TAO3530 Linux kernel"
LICENSE = "GPL"
KERNEL_OUTPUT= "arch/${ARCH}/boot/${KERNEL_IMAGETYPE}"inherit kernel
COMPATIBLE_MACHINE= "tao3530"PR = "r1"
SRC_URI= "file://TAO-PSP-03000106.tar.bz2 \
file://defconfig"S = "${WORKDIR}/linux-2.6.32"
Quoted 8 lines
Quoted 2 lines
Can someone point me out what I did wrong or what I have forgot to configure or where to look to find out what I did wrong.
What did you call the .bb file?
Cheers,
Richard
Sorry for the reply mistake, I am new to mailinglists.
The name of the bb file is: TAO-PSP-2.6.32.bb
Regards,
Gerard
Quoted 51 lines · Gerard van den Bosch
Quoted 50 lines · Richard Purdie
Quoted 40 lines · Gerard van den Bosch
Hello,
I am trying to build Poky for my hardware platform with a custom kernel. But when I build Poky it crashes by not finding a defconfig for kernel 2.6.33.2-r2 which isn't the kernel I preferred to build.
This is what I have done:
Copied local.conf.sample to local.conf and changed the following:
BB_NUMBER_THREADS= "2"PARALLEL_MAKE= "-j 2"
MACHINE ?= "tao3530"Because this is a new machine I have generated a tao3530.conf by copying the beagleboard.conf because this is a similar device.
I have changed the kernel recipe to:
PREFERRED_PROVIDER_virtual/kernel = "TAO-PSP"The kernel I used is normally used in Ångström for this board, but because Ångström is also OpenEmbedded based I assumed I could use the kernel in Poky also.
In the meta/package/linux directory I made the TAO-PSP-2.6.32 directory. In this directory I placed the tar.bz2 of my kernel and the defconfig for my hardware platform.
I have generated a bb file containing the following:
SECTION = "kernel"
DESCRIPTION = "TAO3530 Linux kernel"
LICENSE = "GPL"
KERNEL_OUTPUT= "arch/${ARCH}/boot/${KERNEL_IMAGETYPE}"inherit kernel
COMPATIBLE_MACHINE= "tao3530"PR = "r1"
Quoted 7 lines
SRC_URI= "file://TAO-PSP-03000106.tar.bz2 \
file://defconfig"S = "${WORKDIR}/linux-2.6.32"
Can someone point me out what I did wrong or what I have forgot to configure or where to look to find out what I did wrong.
What did you call the .bb file?
Quoted 7 lines
Quoted 4 lines
Cheers,
Richard
Sorry for the reply mistake, I am new to mailinglists.
The name of the bb file is: TAO-PSP-2.6.32.bb
Try calling it TAO-PSP_2.6.32.bb as "_" is the separator between the name and the version.
Cheers,
Richard
Quoted 58 lines · Richard Purdie
Quoted 57 lines · Gerard van den Bosch
Quoted 46 lines · Richard Purdie
Quoted 45 lines · Gerard van den Bosch
Hello,
I am trying to build Poky for my hardware platform with a custom kernel. But when I build Poky it crashes by not finding a defconfig for kernel 2.6.33.2-r2 which isn't the kernel I preferred to build.
This is what I have done:
Copied local.conf.sample to local.conf and changed the following:
BB_NUMBER_THREADS= "2"PARALLEL_MAKE= "-j 2"
MACHINE ?= "tao3530"Because this is a new machine I have generated a tao3530.conf by copying the beagleboard.conf because this is a similar device.
I have changed the kernel recipe to:
PREFERRED_PROVIDER_virtual/kernel = "TAO-PSP"The kernel I used is normally used in Ångström for this board, but because Ångström is also OpenEmbedded based I assumed I could use the kernel in Poky also.
In the meta/package/linux directory I made the TAO-PSP-2.6.32 directory. In this directory I placed the tar.bz2 of my kernel and the defconfig for my hardware platform.
I have generated a bb file containing the following:
SECTION = "kernel"
DESCRIPTION = "TAO3530 Linux kernel"
LICENSE = "GPL"
KERNEL_OUTPUT= "arch/${ARCH}/boot/${KERNEL_IMAGETYPE}"inherit kernel
COMPATIBLE_MACHINE= "tao3530"PR = "r1"
SRC_URI= "file://TAO-PSP-03000106.tar.bz2 \
file://defconfig"S = "${WORKDIR}/linux-2.6.32"
Quoted 8 lines
Quoted 2 lines
Can someone point me out what I did wrong or what I have forgot to configure or where to look to find out what I did wrong.
What did you call the .bb file?
Cheers,
Richard
Sorry for the reply mistake, I am new to mailinglists.
Quoted 10 lines
Quoted 1 line
The name of the bb file is: TAO-PSP-2.6.32.bb
Try calling it TAO-PSP_2.6.32.bb as "_" is the separator between the name and the version.
Cheers,
Richard
Thanks, it is selecting the right kernel now.
Regards,
Gerard