Skip to contentSkip to conversation

OMAP PM updates for 2.6.39

GIT PULL Kevin Hilman 5 participants 9 messages Mar 11, 2011 – Mar 19, 2011

lore
Share & tools
lore
#0 lore raw

Tony,

Please pull the following OMAP PM related changes for the upcoming 2.6.39 merge window.

Kevin

The following changes since commit a5abba989deceb731047425812d268daf7536575:

Linux 2.6.38-rc8 (2011-03-07 21:09:37 -0800)

are available in the git repository at:
ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm.git for_2.6.39/pm-misc

Anand S Sawant (1):
OMAP2+: smartreflex: remove SR debug directory in omap_sr_remove()

Dave Martin (5):
ARM: omap4: Provide do_wfi() for Thumb-2
ARM: omap4: Convert END() to ENDPROC() for correct linkage with CONFIG_THUMB2_KERNEL
ARM: omap3: Remove hand-encoded SMC instructions
ARM: omap3: Thumb-2 compatibility for sram34xx.S
ARM: omap3: Thumb-2 compatibility for sleep34xx.S

Kevin Hilman (2):
MAINTAINERS: update Kevin's email for OMAP PM section OMAP2+: remove unused UART base addresses from omap_globals

Menon, Nishanth (1):
OMAP3|4: OPP: make omapx_opp_init non-static

Nishanth Menon (1):
OMAP3: beagle xm: enable up to 800MHz OPP

Paul Walmsley (1):
OMAP2/3: PM: remove unnecessary wakeup/sleep dependency clear

Ricardo Salveti de Araujo (1):
OMAP3630: PM: don't warn the user with a trace in case of PM34XX_ERRATUM

Sanjeev Premi (1):
OMAP3: PM: Initialize IVA only if available

Santosh Shilimkar (7):
omap3: pm: Use exported set_cr() instead of a custom one.
omap3: cpuidle: Add description field to each C-state.
OMAP3: PM: Use ARMv7 supported instructions instead of legacy CP15 ones
OMAP3: PM: Fix the MMU on sequence in the asm code
OMAP3: PM: Allow the cache clean when L1 is lost.
OMAP3: PM: Remove un-necessary cp15 registers form low power cpu context
OMAP3: PM: Clear the SCTLR C bit in asm code to prevent data cache allocation

Thara Gopinath (1):
OMAP3: PM: Set/clear T2 bit for Smartreflex on TWL

Vasiliy Kulikov (1):
OMAP: PM: SmartReflex: fix potential NULL dereference

 MAINTAINERS                                     |    2 +-
 arch/arm/mach-omap2/board-omap3beagle.c         |   50 ++++
 arch/arm/mach-omap2/common.c                    |   14 --
 arch/arm/mach-omap2/cpuidle34xx.c               |   11 +-
 arch/arm/mach-omap2/include/mach/omap4-common.h |    4 +
 arch/arm/mach-omap2/omap-headsmp.S              |    2 +-
 arch/arm/mach-omap2/omap44xx-smc.S              |    8 +-
 arch/arm/mach-omap2/omap_twl.c                  |   60 +++++
 arch/arm/mach-omap2/opp3xxx_data.c              |    3 +-
 arch/arm/mach-omap2/opp4xxx_data.c              |    3 +-
 arch/arm/mach-omap2/pm.c                        |    4 +-
 arch/arm/mach-omap2/pm.h                        |    1 +
 arch/arm/mach-omap2/pm24xx.c                    |    8 +-
 arch/arm/mach-omap2/pm34xx.c                    |   25 +--
 arch/arm/mach-omap2/sleep34xx.S                 |  282 +++++++++++------------
 arch/arm/mach-omap2/smartreflex.c               |   31 ++-
 arch/arm/mach-omap2/sram34xx.S                  |   36 +++-
 arch/arm/plat-omap/include/plat/common.h        |    4 -
 18 files changed, 320 insertions(+), 228 deletions(-)
#1 lore raw

Hi Kevin,

Quoted 5 lines · Kevin Hilman

Tony,

Please pull the following OMAP PM related changes for the upcoming 2.6.39 merge window.

Quoted 8 lines

Kevin

The following changes since commit a5abba989deceb731047425812d268daf7536575:

?Linux 2.6.38-rc8 (2011-03-07 21:09:37 -0800)

are available in the git repository at:
?ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm.git for_2.6.39/pm-misc

Waht about the following patch? IIUC it is scheduled for .39.

perf: add OMAP support for the new power events

Regards,
Jean

Quoted 69 lines

Anand S Sawant (1):
? ? ?OMAP2+: smartreflex: remove SR debug directory in omap_sr_remove()

Dave Martin (5):
? ? ?ARM: omap4: Provide do_wfi() for Thumb-2
? ? ?ARM: omap4: Convert END() to ENDPROC() for correct linkage with CONFIG_THUMB2_KERNEL ? ? ?ARM: omap3: Remove hand-encoded SMC instructions
? ? ?ARM: omap3: Thumb-2 compatibility for sram34xx.S
? ? ?ARM: omap3: Thumb-2 compatibility for sleep34xx.S

Kevin Hilman (2):
? ? ?MAINTAINERS: update Kevin's email for OMAP PM section ? ? ?OMAP2+: remove unused UART base addresses from omap_globals

Menon, Nishanth (1):
? ? ?OMAP3|4: OPP: make omapx_opp_init non-static

Nishanth Menon (1):
? ? ?OMAP3: beagle xm: enable up to 800MHz OPP

Paul Walmsley (1):
? ? ?OMAP2/3: PM: remove unnecessary wakeup/sleep dependency clear

Ricardo Salveti de Araujo (1):
? ? ?OMAP3630: PM: don't warn the user with a trace in case of PM34XX_ERRATUM

Sanjeev Premi (1):
? ? ?OMAP3: PM: Initialize IVA only if available

Santosh Shilimkar (7):
? ? ?omap3: pm: Use exported set_cr() instead of a custom one.
? ? ?omap3: cpuidle: Add description field to each C-state.
? ? ?OMAP3: PM: Use ARMv7 supported instructions instead of legacy CP15 ones ? ? ?OMAP3: PM: Fix the MMU on sequence in the asm code
? ? ?OMAP3: PM: Allow the cache clean when L1 is lost.
? ? ?OMAP3: PM: Remove un-necessary cp15 registers form low power cpu context ? ? ?OMAP3: PM: Clear the SCTLR C bit in asm code to prevent data cache allocation

Thara Gopinath (1):
? ? ?OMAP3: PM: Set/clear T2 bit for Smartreflex on TWL

Vasiliy Kulikov (1):
? ? ?OMAP: PM: SmartReflex: fix potential NULL dereference

?MAINTAINERS ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? | ? ?2 +-
?arch/arm/mach-omap2/board-omap3beagle.c ? ? ? ? | ? 50 ++++
?arch/arm/mach-omap2/common.c ? ? ? ? ? ? ? ? ? ?| ? 14 --
?arch/arm/mach-omap2/cpuidle34xx.c ? ? ? ? ? ? ? | ? 11 +-
?arch/arm/mach-omap2/include/mach/omap4-common.h | ? ?4 +
?arch/arm/mach-omap2/omap-headsmp.S ? ? ? ? ? ? ?| ? ?2 +-
?arch/arm/mach-omap2/omap44xx-smc.S ? ? ? ? ? ? ?| ? ?8 +-
?arch/arm/mach-omap2/omap_twl.c ? ? ? ? ? ? ? ? ?| ? 60 +++++
?arch/arm/mach-omap2/opp3xxx_data.c ? ? ? ? ? ? ?| ? ?3 +-
?arch/arm/mach-omap2/opp4xxx_data.c ? ? ? ? ? ? ?| ? ?3 +-
?arch/arm/mach-omap2/pm.c ? ? ? ? ? ? ? ? ? ? ? ?| ? ?4 +-
?arch/arm/mach-omap2/pm.h ? ? ? ? ? ? ? ? ? ? ? ?| ? ?1 +
?arch/arm/mach-omap2/pm24xx.c ? ? ? ? ? ? ? ? ? ?| ? ?8 +-
?arch/arm/mach-omap2/pm34xx.c ? ? ? ? ? ? ? ? ? ?| ? 25 +--
?arch/arm/mach-omap2/sleep34xx.S ? ? ? ? ? ? ? ? | ?282 +++++++++++------------
?arch/arm/mach-omap2/smartreflex.c ? ? ? ? ? ? ? | ? 31 ++-
?arch/arm/mach-omap2/sram34xx.S ? ? ? ? ? ? ? ? ?| ? 36 +++-
?arch/arm/plat-omap/include/plat/common.h ? ? ? ?| ? ?4 -

?18 files changed, 320 insertions(+), 228 deletions(-)
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo at vger.kernel.org
More majordomo info at ?http://vger.kernel.org/majordomo-info.html

#2 lore raw
Quoted 12 lines · Jean Pihet

Hi Kevin,

Quoted 9 lines · Kevin Hilman

Tony,

Please pull the following OMAP PM related changes for the upcoming 2.6.39 merge window.

Kevin

The following changes since commit a5abba989deceb731047425812d268daf7536575:

Quoted 9 lines
Quoted 4 lines

?Linux 2.6.38-rc8 (2011-03-07 21:09:37 -0800)

are available in the git repository at:
?ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm.git for_2.6.39/pm-misc

Waht about the following patch? IIUC it is scheduled for .39.

perf: add OMAP support for the new power events

I have another branch (for_2.6.39/pm-integration) that is based on Paul's integration branch and includes your perf patch.

Once Tony pulls Paul's integration branch, I will send Tony a 2nd pull request for this branch.

Kevin

#3 lore raw
Quoted 21 lines · Kevin Hilman
Quoted 19 lines · Jean Pihet

Hi Kevin,

Quoted 5 lines · Kevin Hilman

Tony,

Please pull the following OMAP PM related changes for the upcoming 2.6.39 merge window.

Quoted 8 lines

Kevin

The following changes since commit a5abba989deceb731047425812d268daf7536575:

?Linux 2.6.38-rc8 (2011-03-07 21:09:37 -0800)

are available in the git repository at:
?ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm.git for_2.6.39/pm-misc

Waht about the following patch? IIUC it is scheduled for .39.

Quoted 8 lines
Quoted 2 lines

? ? perf: add OMAP support for the new power events

I have another branch (for_2.6.39/pm-integration) that is based on Paul's integration branch and includes your perf patch.

Once Tony pulls Paul's integration branch, I will send Tony a 2nd pull request for this branch.

Ok thx for the info!

Jean

Quoted 3 lines

Kevin

#4 lore raw
In reply to Kevin Hilman

Hi,

Am 11.03.2011 01:59, schrieb Kevin Hilman:

Quoted 4 lines

Dave Martin (5):
ARM: omap4: Provide do_wfi() for Thumb-2
ARM: omap4: Convert END() to ENDPROC() for correct linkage with CONFIG_THUMB2_KERNEL
ARM: omap3: Remove hand-encoded SMC instructions

"ARM: omap3: Remove hand-encoded SMC instructions" fails for me with:

/home/stephan/projects/openelec/build.OpenELEC-panda.arm-devel/toolchain/bin/arm-openelec-linux-gnueabi-gcc -Wp,-MD,arch/arm/mach-omap2/.sleep34xx.o.d -nostdinc -isystem /home/stephan/projects/openelec/build.OpenELEC-panda.arm-devel/toolchain/lib/gcc/arm-openelec-linux-gnueabi/4.5.2/include -I/home/stephan/projects/openelec/build.OpenELEC-panda.arm-devel/linux-2.6.38-rc8/arch/arm/include -Iinclude -include include/generated/autoconf.h -D__KERNEL__ -mlittle-endian -Iarch/arm/mach-omap2/include -Iarch/arm/plat-omap/include -D__ASSEMBLY__ -mabi=aapcs-linux -mno-thumb-interwork -funwind-tables -mthumb -Wa,-mimplicit-it=always -Wa,-mno-warn-deprecated -Wa,-mthumb -D__LINUX_ARM_ARCH__=7 -march=armv7-a -include asm/unified.h -msoft-float -gdwarf-2 -Wa,-march=armv7-a -c -o arch/arm/mach-omap2/sleep34xx.o arch/arm/mach-omap2/sleep34xx.S
arch/arm/mach-omap2/sleep34xx.S: Assembler messages:
arch/arm/mach-omap2/sleep34xx.S:149: Error: selected processor does not support ARM mode smc #1' arch/arm/mach-omap2/sleep34xx.S:416: Error: selected processor does not support ARM mode smc #1' arch/arm/mach-omap2/sleep34xx.S:427: Error: selected processor does not support ARM mode smc #1' arch/arm/mach-omap2/sleep34xx.S:452: Error: selected processor does not support ARM mode smc #0' arch/arm/mach-omap2/sleep34xx.S:458: Error: selected processor does not support ARM mode smc #0' arch/arm/mach-omap2/sleep34xx.S:463: Error: selected processor does not support ARM mode smc #0' make[2]: *** [arch/arm/mach-omap2/sleep34xx.o] Error 1
make[1]: *** [arch/arm/mach-omap2] Error 2

replacing in arch/arm/mach-omap2/Makefile:

AFLAGS_sleep24xx.o :=-Wa,-march=armv6
AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a

to:

AFLAGS_sleep24xx.o :=-Wa,-march=armv6
AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec)

helps compiling (see also: https://patchwork.kernel.org/patch/369681/)

thanks

Stephan

#5 lore raw
Quoted 27 lines · Stephan Raue

Hi,

Am 11.03.2011 01:59, schrieb Kevin Hilman:

Quoted 4 lines

Dave Martin (5):
ARM: omap4: Provide do_wfi() for Thumb-2
ARM: omap4: Convert END() to ENDPROC() for correct linkage with CONFIG_THUMB2_KERNEL
ARM: omap3: Remove hand-encoded SMC instructions

"ARM: omap3: Remove hand-encoded SMC instructions" fails for me with:

/home/stephan/projects/openelec/build.OpenELEC-panda.arm-devel/toolchain/bin/arm-openelec-linux-gnueabi-gcc -Wp,-MD,arch/arm/mach-omap2/.sleep34xx.o.d -nostdinc -isystem /home/stephan/projects/openelec/build.OpenELEC-panda.arm-devel/toolchain/lib/gcc/arm-openelec-linux-gnueabi/4.5.2/include -I/home/stephan/projects/openelec/build.OpenELEC-panda.arm-devel/linux-2.6.38-rc8/arch/arm/include -Iinclude -include include/generated/autoconf.h -D__KERNEL__ -mlittle-endian -Iarch/arm/mach-omap2/include -Iarch/arm/plat-omap/include -D__ASSEMBLY__ -mabi=aapcs-linux -mno-thumb-interwork -funwind-tables -mthumb -Wa,-mimplicit-it=always -Wa,-mno-warn-deprecated -Wa,-mthumb -D__LINUX_ARM_ARCH__=7 -march=armv7-a -include asm/unified.h -msoft-float -gdwarf-2 -Wa,-march=armv7-a -c -o arch/arm/mach-omap2/sleep34xx.o arch/arm/mach-omap2/sleep34xx.S
arch/arm/mach-omap2/sleep34xx.S: Assembler messages:
arch/arm/mach-omap2/sleep34xx.S:149: Error: selected processor does not support ARM mode smc #1' arch/arm/mach-omap2/sleep34xx.S:416: Error: selected processor does not support ARM mode smc #1' arch/arm/mach-omap2/sleep34xx.S:427: Error: selected processor does not support ARM mode smc #1' arch/arm/mach-omap2/sleep34xx.S:452: Error: selected processor does not support ARM mode smc #0' arch/arm/mach-omap2/sleep34xx.S:458: Error: selected processor does not support ARM mode smc #0' arch/arm/mach-omap2/sleep34xx.S:463: Error: selected processor does not support ARM mode smc #0' make[2]: *** [arch/arm/mach-omap2/sleep34xx.o] Error 1
make[1]: *** [arch/arm/mach-omap2] Error 2

replacing in arch/arm/mach-omap2/Makefile:

AFLAGS_sleep24xx.o :=-Wa,-march=armv6
AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a

Quoted 6 lines

to:

AFLAGS_sleep24xx.o :=-Wa,-march=armv6
AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec)

helps compiling (see also: https://patchwork.kernel.org/patch/369681/)

Care to post a patch for this and mention your compiler version too?

Tony

#6 lore raw

Am 14.03.2011 20:38, schrieb Tony Lindgren:

Quoted 29 lines · Stephan Raue
Quoted 28 lines

Hi,

Am 11.03.2011 01:59, schrieb Kevin Hilman:

Quoted 4 lines

Dave Martin (5):
ARM: omap4: Provide do_wfi() for Thumb-2
ARM: omap4: Convert END() to ENDPROC() for correct linkage with CONFIG_THUMB2_KERNEL
ARM: omap3: Remove hand-encoded SMC instructions

"ARM: omap3: Remove hand-encoded SMC instructions" fails for me with:

/home/stephan/projects/openelec/build.OpenELEC-panda.arm-devel/toolchain/bin/arm-openelec-linux-gnueabi-gcc -Wp,-MD,arch/arm/mach-omap2/.sleep34xx.o.d -nostdinc -isystem /home/stephan/projects/openelec/build.OpenELEC-panda.arm-devel/toolchain/lib/gcc/arm-openelec-linux-gnueabi/4.5.2/include -I/home/stephan/projects/openelec/build.OpenELEC-panda.arm-devel/linux-2.6.38-rc8/arch/arm/include -Iinclude -include include/generated/autoconf.h -D__KERNEL__ -mlittle-endian -Iarch/arm/mach-omap2/include -Iarch/arm/plat-omap/include -D__ASSEMBLY__ -mabi=aapcs-linux -mno-thumb-interwork -funwind-tables -mthumb -Wa,-mimplicit-it=always -Wa,-mno-warn-deprecated -Wa,-mthumb -D__LINUX_ARM_ARCH__=7 -march=armv7-a -include asm/unified.h -msoft-float -gdwarf-2 -Wa,-march=armv7-a -c -o arch/arm/mach-omap2/sleep34xx.o arch/arm/mach-omap2/sleep34xx.S
arch/arm/mach-omap2/sleep34xx.S: Assembler messages:
arch/arm/mach-omap2/sleep34xx.S:149: Error: selected processor does not support ARM mode smc #1' arch/arm/mach-omap2/sleep34xx.S:416: Error: selected processor does not support ARM mode smc #1' arch/arm/mach-omap2/sleep34xx.S:427: Error: selected processor does not support ARM mode smc #1' arch/arm/mach-omap2/sleep34xx.S:452: Error: selected processor does not support ARM mode smc #0' arch/arm/mach-omap2/sleep34xx.S:458: Error: selected processor does not support ARM mode smc #0' arch/arm/mach-omap2/sleep34xx.S:463: Error: selected processor does not support ARM mode smc #0' make[2]: *** [arch/arm/mach-omap2/sleep34xx.o] Error 1
make[1]: *** [arch/arm/mach-omap2] Error 2

replacing in arch/arm/mach-omap2/Makefile:

AFLAGS_sleep24xx.o :=-Wa,-march=armv6
AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a

to:

Quoted 7 lines
Quoted 4 lines

AFLAGS_sleep24xx.o :=-Wa,-march=armv6
AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec)

helps compiling (see also: https://patchwork.kernel.org/patch/369681/)

Care to post a patch for this and mention your compiler version too?

Tony

patch attached.

i am using http://gitorious.org/linux-omap-dss2/linux with gcc-4.5.2, binutils-2.21

thanks

Stephan
-------------- next part --------------
A non-text attachment was scrubbed...
Name: linux-2.6.38-rc8-321-linux_omap_dss2_fix_SMC_instructions.patch
Type: text/x-patch
Size: 572 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20110314/66bfc97f/attachment.bin>

#7 lore raw
Quoted 66 lines

-----Original Message-----
From: linux-omap-owner at vger.kernel.org [mailto:linux-omap- owner at vger.kernel.org] On Behalf Of Stephan Raue
Sent: Tuesday, March 15, 2011 1:21 AM
To: Tony Lindgren
Cc: Kevin Hilman; linux-omap at vger.kernel.org; linux-arm- kernel at lists.infradead.org
Subject: Re: [GIT PULL] OMAP PM updates for 2.6.39

Am 14.03.2011 20:38, schrieb Tony Lindgren:

Quoted 7 lines · Stephan Raue
Quoted 6 lines

Hi,

Am 11.03.2011 01:59, schrieb Kevin Hilman:

Quoted 3 lines

Dave Martin (5):
ARM: omap4: Provide do_wfi() for Thumb-2
ARM: omap4: Convert END() to ENDPROC() for correct

linkage with CONFIG_THUMB2_KERNEL

Quoted 2 lines
Quoted 2 lines
Quoted 1 line

ARM: omap3: Remove hand-encoded SMC instructions

"ARM: omap3: Remove hand-encoded SMC instructions" fails for me

with:

Quoted 2 lines
Quoted 2 lines

/home/stephan/projects/openelec/build.OpenELEC-panda.arm-

devel/toolchain/bin/arm-openelec-linux-gnueabi-gcc -Wp,- MD,arch/arm/mach-omap2/.sleep34xx.o.d -nostdinc -isystem /home/stephan/projects/openelec/build.OpenELEC-panda.arm- devel/toolchain/lib/gcc/arm-openelec-linux-gnueabi/4.5.2/include - I/home/stephan/projects/openelec/build.OpenELEC-panda.arm- devel/linux-2.6.38-rc8/arch/arm/include -Iinclude -include include/generated/autoconf.h -D__KERNEL__ -mlittle-endian - Iarch/arm/mach-omap2/include -Iarch/arm/plat-omap/include - D__ASSEMBLY__ -mabi=aapcs-linux -mno-thumb-interwork -funwind-tables -mthumb -Wa,-mimplicit-it=always -Wa,-mno-warn-deprecated -Wa,- mthumb -D__LINUX_ARM_ARCH__=7 -march=armv7-a -include asm/unified.h
-msoft-float -gdwarf-2 -Wa,-march=armv7-a -c -o arch/arm/mach-
omap2/sleep34xx.o arch/arm/mach-omap2/sleep34xx.S

Quoted 2 lines
Quoted 2 lines

arch/arm/mach-omap2/sleep34xx.S: Assembler messages:
arch/arm/mach-omap2/sleep34xx.S:149: Error: selected processor

does not support ARM mode `smc #1'

Quoted 1 line
Quoted 1 line

arch/arm/mach-omap2/sleep34xx.S:416: Error: selected processor

does not support ARM mode `smc #1'

Quoted 1 line
Quoted 1 line

arch/arm/mach-omap2/sleep34xx.S:427: Error: selected processor

does not support ARM mode `smc #1'

Quoted 1 line
Quoted 1 line

arch/arm/mach-omap2/sleep34xx.S:452: Error: selected processor

does not support ARM mode `smc #0'

Quoted 1 line
Quoted 1 line

arch/arm/mach-omap2/sleep34xx.S:458: Error: selected processor

does not support ARM mode `smc #0'

Quoted 1 line
Quoted 1 line

arch/arm/mach-omap2/sleep34xx.S:463: Error: selected processor

does not support ARM mode `smc #0'

Quoted 6 lines
Quoted 6 lines

make[2]: *** [arch/arm/mach-omap2/sleep34xx.o] Error 1 make[1]: *** [arch/arm/mach-omap2] Error 2

replacing in arch/arm/mach-omap2/Makefile:

Quoted 7 lines
Quoted 7 lines

AFLAGS_sleep24xx.o :=-Wa,-march=armv6
AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a

to:

AFLAGS_sleep24xx.o :=-Wa,-march=armv6
AFLAGS_sleep34xx.o :=-Wa,-march=armv7-

a$(plus_sec)

Quoted 2 lines
Quoted 2 lines

helps compiling (see also:

https://patchwork.kernel.org/patch/369681/)

Quoted 9 lines
Quoted 1 line

Care to post a patch for this and mention your compiler version

too?

Quoted 2 lines

Tony

patch attached.

i am using http://gitorious.org/linux-omap-dss2/linux with gcc- 4.5.2, binutils-2.21

Looks like I need to upgrade my gcc version. This is not seen with 4.3.3

Regards,
Santosh

#8 lore raw
In reply to Stephan Raue
Quoted 6 lines · Stephan Raue
Quoted 2 lines

Tony

patch attached.

i am using http://gitorious.org/linux-omap-dss2/linux with gcc-4.5.2, binutils-2.21

Still need a proper patch description and your Signed-off-by line :)

See Documentation/Submit* files in your kernel directory for more info.

Tony

Quoted 12 lines

diff -Naur linux-2.6.38-rc8/arch/arm/mach-omap2/Makefile linux-2.6.38-rc8.patch/arch/arm/mach-omap2/Makefile

arch/arm/mach-omap2/Makefile +1 -1
@@ -68,7 +68,7 @@
 obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3)	+= smartreflex-class3.o
 
 AFLAGS_sleep24xx.o			:=-Wa,-march=armv6
-AFLAGS_sleep34xx.o			:=-Wa,-march=armv7-a
+AFLAGS_sleep34xx.o			:=-Wa,-march=armv7-a$(plus_sec)
 
 ifeq ($(CONFIG_PM_VERBOSE),y)
 CFLAGS_pm_bus.o				+= -DDEBUG