OMAP PM updates for 2.6.39
Tony,
Please pull the following OMAP PM related changes for the upcoming 2.6.39 merge window.
Kevin
The following changes since commit a5abba989deceb731047425812d268daf7536575:
Linux 2.6.38-rc8 (2011-03-07 21:09:37 -0800)
are available in the git repository at:
ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm.git for_2.6.39/pm-misc
Anand S Sawant (1):
OMAP2+: smartreflex: remove SR debug directory in omap_sr_remove()
Dave Martin (5):
ARM: omap4: Provide do_wfi() for Thumb-2
ARM: omap4: Convert END() to ENDPROC() for correct linkage with CONFIG_THUMB2_KERNEL
ARM: omap3: Remove hand-encoded SMC instructions
ARM: omap3: Thumb-2 compatibility for sram34xx.S
ARM: omap3: Thumb-2 compatibility for sleep34xx.S
Kevin Hilman (2):
MAINTAINERS: update Kevin's email for OMAP PM section OMAP2+: remove unused UART base addresses from omap_globals
Menon, Nishanth (1):
OMAP3|4: OPP: make omapx_opp_init non-static
Nishanth Menon (1):
OMAP3: beagle xm: enable up to 800MHz OPP
Paul Walmsley (1):
OMAP2/3: PM: remove unnecessary wakeup/sleep dependency clear
Ricardo Salveti de Araujo (1):
OMAP3630: PM: don't warn the user with a trace in case of PM34XX_ERRATUM
Sanjeev Premi (1):
OMAP3: PM: Initialize IVA only if available
Santosh Shilimkar (7):
omap3: pm: Use exported set_cr() instead of a custom one.
omap3: cpuidle: Add description field to each C-state.
OMAP3: PM: Use ARMv7 supported instructions instead of legacy CP15 ones
OMAP3: PM: Fix the MMU on sequence in the asm code
OMAP3: PM: Allow the cache clean when L1 is lost.
OMAP3: PM: Remove un-necessary cp15 registers form low power cpu context
OMAP3: PM: Clear the SCTLR C bit in asm code to prevent data cache allocation
Thara Gopinath (1):
OMAP3: PM: Set/clear T2 bit for Smartreflex on TWL
Vasiliy Kulikov (1):
OMAP: PM: SmartReflex: fix potential NULL dereference
MAINTAINERS | 2 +- arch/arm/mach-omap2/board-omap3beagle.c | 50 ++++ arch/arm/mach-omap2/common.c | 14 -- arch/arm/mach-omap2/cpuidle34xx.c | 11 +- arch/arm/mach-omap2/include/mach/omap4-common.h | 4 + arch/arm/mach-omap2/omap-headsmp.S | 2 +- arch/arm/mach-omap2/omap44xx-smc.S | 8 +- arch/arm/mach-omap2/omap_twl.c | 60 +++++ arch/arm/mach-omap2/opp3xxx_data.c | 3 +- arch/arm/mach-omap2/opp4xxx_data.c | 3 +- arch/arm/mach-omap2/pm.c | 4 +- arch/arm/mach-omap2/pm.h | 1 + arch/arm/mach-omap2/pm24xx.c | 8 +- arch/arm/mach-omap2/pm34xx.c | 25 +-- arch/arm/mach-omap2/sleep34xx.S | 282 +++++++++++------------ arch/arm/mach-omap2/smartreflex.c | 31 ++- arch/arm/mach-omap2/sram34xx.S | 36 +++- arch/arm/plat-omap/include/plat/common.h | 4 - 18 files changed, 320 insertions(+), 228 deletions(-)
Hi Kevin,
Quoted 5 lines · Kevin Hilman
Tony,
Please pull the following OMAP PM related changes for the upcoming 2.6.39 merge window.
Quoted 8 lines
Kevin
The following changes since commit
a5abba989deceb731047425812d268daf7536575:?Linux 2.6.38-rc8 (2011-03-07 21:09:37 -0800)
are available in the git repository at:
?ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm.git for_2.6.39/pm-misc
Waht about the following patch? IIUC it is scheduled for .39.
perf: add OMAP support for the new power events
Regards,
Jean
Quoted 69 lines
Anand S Sawant (1):
? ? ?OMAP2+: smartreflex: remove SR debug directory inomap_sr_remove()Dave Martin (5):
? ? ?ARM: omap4: Providedo_wfi()for Thumb-2
? ? ?ARM: omap4: ConvertEND()toENDPROC()for correct linkage withCONFIG_THUMB2_KERNEL? ? ?ARM: omap3: Remove hand-encoded SMC instructions
? ? ?ARM: omap3: Thumb-2 compatibility forsram34xx.S
? ? ?ARM: omap3: Thumb-2 compatibility forsleep34xx.SKevin Hilman (2):
? ? ?MAINTAINERS: update Kevin's email for OMAP PM section ? ? ?OMAP2+: remove unused UART base addresses fromomap_globalsMenon, Nishanth (1):
? ? ?OMAP3|4: OPP: makeomapx_opp_initnon-staticNishanth Menon (1):
? ? ?OMAP3: beagle xm: enable up to 800MHz OPPPaul Walmsley (1):
? ? ?OMAP2/3: PM: remove unnecessary wakeup/sleep dependency clearRicardo Salveti de Araujo (1):
? ? ?OMAP3630: PM: don't warn the user with a trace in case ofPM34XX_ERRATUMSanjeev Premi (1):
? ? ?OMAP3: PM: Initialize IVA only if availableSantosh Shilimkar (7):
? ? ?omap3: pm: Use exportedset_cr()instead of a custom one.
? ? ?omap3: cpuidle: Add description field to each C-state.
? ? ?OMAP3: PM: Use ARMv7 supported instructions instead of legacy CP15 ones ? ? ?OMAP3: PM: Fix the MMU on sequence in the asm code
? ? ?OMAP3: PM: Allow the cache clean when L1 is lost.
? ? ?OMAP3: PM: Remove un-necessary cp15 registers form low power cpu context ? ? ?OMAP3: PM: Clear the SCTLR C bit in asm code to prevent data cache allocationThara Gopinath (1):
? ? ?OMAP3: PM: Set/clear T2 bit for Smartreflex on TWLVasiliy Kulikov (1):
? ? ?OMAP: PM: SmartReflex: fix potential NULL dereference?MAINTAINERS ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? | ? ?2 +- ?arch/arm/mach-omap2/board-omap3beagle.c ? ? ? ? | ? 50 ++++ ?arch/arm/mach-omap2/common.c ? ? ? ? ? ? ? ? ? ?| ? 14 -- ?arch/arm/mach-omap2/cpuidle34xx.c ? ? ? ? ? ? ? | ? 11 +- ?arch/arm/mach-omap2/include/mach/omap4-common.h | ? ?4 + ?arch/arm/mach-omap2/omap-headsmp.S ? ? ? ? ? ? ?| ? ?2 +- ?arch/arm/mach-omap2/omap44xx-smc.S ? ? ? ? ? ? ?| ? ?8 +- ?arch/arm/mach-omap2/omap_twl.c ? ? ? ? ? ? ? ? ?| ? 60 +++++ ?arch/arm/mach-omap2/opp3xxx_data.c ? ? ? ? ? ? ?| ? ?3 +- ?arch/arm/mach-omap2/opp4xxx_data.c ? ? ? ? ? ? ?| ? ?3 +- ?arch/arm/mach-omap2/pm.c ? ? ? ? ? ? ? ? ? ? ? ?| ? ?4 +- ?arch/arm/mach-omap2/pm.h ? ? ? ? ? ? ? ? ? ? ? ?| ? ?1 + ?arch/arm/mach-omap2/pm24xx.c ? ? ? ? ? ? ? ? ? ?| ? ?8 +- ?arch/arm/mach-omap2/pm34xx.c ? ? ? ? ? ? ? ? ? ?| ? 25 +-- ?arch/arm/mach-omap2/sleep34xx.S ? ? ? ? ? ? ? ? | ?282 +++++++++++------------ ?arch/arm/mach-omap2/smartreflex.c ? ? ? ? ? ? ? | ? 31 ++- ?arch/arm/mach-omap2/sram34xx.S ? ? ? ? ? ? ? ? ?| ? 36 +++- ?arch/arm/plat-omap/include/plat/common.h ? ? ? ?| ? ?4 -?18 files changed, 320 insertions(+), 228 deletions(-)
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo at vger.kernel.org
More majordomo info at ?http://vger.kernel.org/majordomo-info.html
Quoted 12 lines · Jean Pihet
Hi Kevin,
Quoted 9 lines · Kevin Hilman
Tony,
Please pull the following OMAP PM related changes for the upcoming 2.6.39 merge window.
Kevin
The following changes since commit
a5abba989deceb731047425812d268daf7536575:
Quoted 9 lines
Quoted 4 lines
?Linux 2.6.38-rc8 (2011-03-07 21:09:37 -0800)
are available in the git repository at:
?ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm.git for_2.6.39/pm-miscWaht about the following patch? IIUC it is scheduled for .39.
perf: add OMAP support for the new power events
I have another branch (for_2.6.39/pm-integration) that is based on Paul's integration branch and includes your perf patch.
Once Tony pulls Paul's integration branch, I will send Tony a 2nd pull request for this branch.
Kevin
Quoted 21 lines · Kevin Hilman
Quoted 19 lines · Jean Pihet
Hi Kevin,
Quoted 5 lines · Kevin Hilman
Tony,
Please pull the following OMAP PM related changes for the upcoming 2.6.39 merge window.
Quoted 8 lines
Kevin
The following changes since commit
a5abba989deceb731047425812d268daf7536575:?Linux 2.6.38-rc8 (2011-03-07 21:09:37 -0800)
are available in the git repository at:
?ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm.git for_2.6.39/pm-miscWaht about the following patch? IIUC it is scheduled for .39.
Quoted 8 lines
Quoted 2 lines
? ? perf: add OMAP support for the new power events
I have another branch (for_2.6.39/pm-integration) that is based on Paul's integration branch and includes your perf patch.
Once Tony pulls Paul's integration branch, I will send Tony a 2nd pull request for this branch.
Ok thx for the info!
Jean
Quoted 3 lines
Kevin
Hi,
Am 11.03.2011 01:59, schrieb Kevin Hilman:
Quoted 4 lines
Dave Martin (5):
ARM: omap4: Providedo_wfi()for Thumb-2
ARM: omap4: ConvertEND()toENDPROC()for correct linkage withCONFIG_THUMB2_KERNEL
ARM: omap3: Remove hand-encoded SMC instructions
"ARM: omap3: Remove hand-encoded SMC instructions" fails for me with:
/home/stephan/projects/openelec/build.OpenELEC-panda.arm-devel/toolchain/bin/arm-openelec-linux-gnueabi-gcc -Wp,-MD,arch/arm/mach-omap2/.sleep34xx.o.d -nostdinc -isystem /home/stephan/projects/openelec/build.OpenELEC-panda.arm-devel/toolchain/lib/gcc/arm-openelec-linux-gnueabi/4.5.2/include -I/home/stephan/projects/openelec/build.OpenELEC-panda.arm-devel/linux-2.6.38-rc8/arch/arm/include -Iinclude -include include/generated/autoconf.h -D__KERNEL__ -mlittle-endian -Iarch/arm/mach-omap2/include -Iarch/arm/plat-omap/include -D__ASSEMBLY__ -mabi=aapcs-linux -mno-thumb-interwork -funwind-tables -mthumb -Wa,-mimplicit-it=always -Wa,-mno-warn-deprecated -Wa,-mthumb -D__LINUX_ARM_ARCH__=7 -march=armv7-a -include asm/unified.h -msoft-float -gdwarf-2 -Wa,-march=armv7-a -c -o arch/arm/mach-omap2/sleep34xx.o arch/arm/mach-omap2/sleep34xx.Sarch/arm/mach-omap2/sleep34xx.S: Assembler messages:arch/arm/mach-omap2/sleep34xx.S:149: Error: selected processor does not support ARM mode smc #1' arch/arm/mach-omap2/sleep34xx.S:416: Error: selected processor does not support ARM mode smc #1' arch/arm/mach-omap2/sleep34xx.S:427: Error: selected processor does not support ARM mode smc #1' arch/arm/mach-omap2/sleep34xx.S:452: Error: selected processor does not support ARM mode smc #0' arch/arm/mach-omap2/sleep34xx.S:458: Error: selected processor does not support ARM mode smc #0' arch/arm/mach-omap2/sleep34xx.S:463: Error: selected processor does not support ARM mode smc #0' make[2]: *** [arch/arm/mach-omap2/sleep34xx.o] Error 1
make[1]: *** [arch/arm/mach-omap2] Error 2
replacing in arch/arm/mach-omap2/Makefile:
AFLAGS_sleep24xx.o :=-Wa,-march=armv6
AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a
to:
AFLAGS_sleep24xx.o :=-Wa,-march=armv6
AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec)
helps compiling (see also: https://patchwork.kernel.org/patch/369681/)
thanks
Stephan
Quoted 27 lines · Stephan Raue
Hi,
Am 11.03.2011 01:59, schrieb Kevin Hilman:
Quoted 4 lines
Dave Martin (5):
ARM: omap4: Providedo_wfi()for Thumb-2
ARM: omap4: ConvertEND()toENDPROC()for correct linkage withCONFIG_THUMB2_KERNEL
ARM: omap3: Remove hand-encoded SMC instructions"ARM: omap3: Remove hand-encoded SMC instructions" fails for me with:
/home/stephan/projects/openelec/build.OpenELEC-panda.arm-devel/toolchain/bin/arm-openelec-linux-gnueabi-gcc-Wp,-MD,arch/arm/mach-omap2/.sleep34xx.o.d -nostdinc -isystem/home/stephan/projects/openelec/build.OpenELEC-panda.arm-devel/toolchain/lib/gcc/arm-openelec-linux-gnueabi/4.5.2/include-I/home/stephan/projects/openelec/build.OpenELEC-panda.arm-devel/linux-2.6.38-rc8/arch/arm/include -Iinclude -includeinclude/generated/autoconf.h-D__KERNEL__ -mlittle-endian -Iarch/arm/mach-omap2/include -Iarch/arm/plat-omap/include -D__ASSEMBLY__ -mabi=aapcs-linux -mno-thumb-interwork -funwind-tables -mthumb -Wa,-mimplicit-it=always -Wa,-mno-warn-deprecated -Wa,-mthumb -D__LINUX_ARM_ARCH__=7 -march=armv7-a -includeasm/unified.h-msoft-float -gdwarf-2 -Wa,-march=armv7-a -c -oarch/arm/mach-omap2/sleep34xx.oarch/arm/mach-omap2/sleep34xx.Sarch/arm/mach-omap2/sleep34xx.S: Assembler messages:arch/arm/mach-omap2/sleep34xx.S:149: Error: selected processor does not support ARM modesmc #1' arch/arm/mach-omap2/sleep34xx.S:416: Error: selected processor does not support ARM modesmc #1'arch/arm/mach-omap2/sleep34xx.S:427: Error: selected processor does not support ARM modesmc #1' arch/arm/mach-omap2/sleep34xx.S:452: Error: selected processor does not support ARM modesmc #0'arch/arm/mach-omap2/sleep34xx.S:458: Error: selected processor does not support ARM modesmc #0' arch/arm/mach-omap2/sleep34xx.S:463: Error: selected processor does not support ARM modesmc #0' make[2]: *** [arch/arm/mach-omap2/sleep34xx.o] Error 1
make[1]: *** [arch/arm/mach-omap2] Error 2replacing in
arch/arm/mach-omap2/Makefile:AFLAGS_sleep24xx.o :=-Wa,-march=armv6
AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a
Quoted 6 lines
to:
AFLAGS_sleep24xx.o :=-Wa,-march=armv6
AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec)helps compiling (see also: https://patchwork.kernel.org/patch/369681/)
Care to post a patch for this and mention your compiler version too?
Tony
Am 14.03.2011 20:38, schrieb Tony Lindgren:
Quoted 29 lines · Stephan Raue
Quoted 28 lines
Hi,
Am 11.03.2011 01:59, schrieb Kevin Hilman:
Quoted 4 lines
Dave Martin (5):
ARM: omap4: Providedo_wfi()for Thumb-2
ARM: omap4: ConvertEND()toENDPROC()for correct linkage withCONFIG_THUMB2_KERNEL
ARM: omap3: Remove hand-encoded SMC instructions"ARM: omap3: Remove hand-encoded SMC instructions" fails for me with:
/home/stephan/projects/openelec/build.OpenELEC-panda.arm-devel/toolchain/bin/arm-openelec-linux-gnueabi-gcc-Wp,-MD,arch/arm/mach-omap2/.sleep34xx.o.d -nostdinc -isystem/home/stephan/projects/openelec/build.OpenELEC-panda.arm-devel/toolchain/lib/gcc/arm-openelec-linux-gnueabi/4.5.2/include-I/home/stephan/projects/openelec/build.OpenELEC-panda.arm-devel/linux-2.6.38-rc8/arch/arm/include -Iinclude -includeinclude/generated/autoconf.h-D__KERNEL__ -mlittle-endian -Iarch/arm/mach-omap2/include -Iarch/arm/plat-omap/include -D__ASSEMBLY__ -mabi=aapcs-linux -mno-thumb-interwork -funwind-tables -mthumb -Wa,-mimplicit-it=always -Wa,-mno-warn-deprecated -Wa,-mthumb -D__LINUX_ARM_ARCH__=7 -march=armv7-a -includeasm/unified.h-msoft-float -gdwarf-2 -Wa,-march=armv7-a -c -oarch/arm/mach-omap2/sleep34xx.oarch/arm/mach-omap2/sleep34xx.Sarch/arm/mach-omap2/sleep34xx.S: Assembler messages:arch/arm/mach-omap2/sleep34xx.S:149: Error: selected processor does not support ARM modesmc #1' arch/arm/mach-omap2/sleep34xx.S:416: Error: selected processor does not support ARM modesmc #1'arch/arm/mach-omap2/sleep34xx.S:427: Error: selected processor does not support ARM modesmc #1' arch/arm/mach-omap2/sleep34xx.S:452: Error: selected processor does not support ARM modesmc #0'arch/arm/mach-omap2/sleep34xx.S:458: Error: selected processor does not support ARM modesmc #0' arch/arm/mach-omap2/sleep34xx.S:463: Error: selected processor does not support ARM modesmc #0' make[2]: *** [arch/arm/mach-omap2/sleep34xx.o] Error 1
make[1]: *** [arch/arm/mach-omap2] Error 2replacing in
arch/arm/mach-omap2/Makefile:AFLAGS_sleep24xx.o :=-Wa,-march=armv6
AFLAGS_sleep34xx.o :=-Wa,-march=armv7-ato:
Quoted 7 lines
Quoted 4 lines
AFLAGS_sleep24xx.o :=-Wa,-march=armv6
AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec)helps compiling (see also: https://patchwork.kernel.org/patch/369681/)
Care to post a patch for this and mention your compiler version too?
Tony
patch attached.
i am using http://gitorious.org/linux-omap-dss2/linux with gcc-4.5.2, binutils-2.21
thanks
Stephan
-------------- next part --------------
A non-text attachment was scrubbed...
Name: linux-2.6.38-rc8-321-linux_omap_dss2_fix_SMC_instructions.patch
Type: text/x-patch
Size: 572 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20110314/66bfc97f/attachment.bin>
Quoted 66 lines
-----Original Message-----
From: linux-omap-owner at vger.kernel.org [mailto:linux-omap- owner at vger.kernel.org] On Behalf Of Stephan Raue
Sent: Tuesday, March 15, 2011 1:21 AM
To: Tony Lindgren
Cc: Kevin Hilman; linux-omap at vger.kernel.org; linux-arm- kernel at lists.infradead.org
Subject: Re: [GIT PULL] OMAP PM updates for 2.6.39Am 14.03.2011 20:38, schrieb Tony Lindgren:
Quoted 7 lines · Stephan Raue
Quoted 6 lines
Hi,
Am 11.03.2011 01:59, schrieb Kevin Hilman:
Quoted 3 lines
Dave Martin (5):
ARM: omap4: Providedo_wfi()for Thumb-2
ARM: omap4: ConvertEND()toENDPROC()for correctlinkage with
CONFIG_THUMB2_KERNELQuoted 2 lines
Quoted 2 lines
Quoted 1 line
ARM: omap3: Remove hand-encoded SMC instructions
"ARM: omap3: Remove hand-encoded SMC instructions" fails for me
with:
Quoted 2 lines
Quoted 2 lines
/home/stephan/projects/openelec/build.OpenELEC-panda.arm-devel/toolchain/bin/arm-openelec-linux-gnueabi-gcc -Wp,- MD,arch/arm/mach-omap2/.sleep34xx.o.d -nostdinc -isystem
/home/stephan/projects/openelec/build.OpenELEC-panda.arm-devel/toolchain/lib/gcc/arm-openelec-linux-gnueabi/4.5.2/include - I/home/stephan/projects/openelec/build.OpenELEC-panda.arm- devel/linux-2.6.38-rc8/arch/arm/include -Iinclude -includeinclude/generated/autoconf.h-D__KERNEL__ -mlittle-endian - Iarch/arm/mach-omap2/include -Iarch/arm/plat-omap/include -D__ASSEMBLY__-mabi=aapcs-linux -mno-thumb-interwork -funwind-tables -mthumb -Wa,-mimplicit-it=always -Wa,-mno-warn-deprecated -Wa,- mthumb -D__LINUX_ARM_ARCH__=7 -march=armv7-a -includeasm/unified.h
-msoft-float -gdwarf-2 -Wa,-march=armv7-a -c -oarch/arm/mach-omap2/sleep34xx.oarch/arm/mach-omap2/sleep34xx.SQuoted 2 lines
Quoted 2 lines
arch/arm/mach-omap2/sleep34xx.S: Assembler messages:arch/arm/mach-omap2/sleep34xx.S:149: Error: selected processordoes not support ARM mode `smc #1'
Quoted 1 line
Quoted 1 line
arch/arm/mach-omap2/sleep34xx.S:416: Error: selected processordoes not support ARM mode `smc #1'
Quoted 1 line
Quoted 1 line
arch/arm/mach-omap2/sleep34xx.S:427: Error: selected processordoes not support ARM mode `smc #1'
Quoted 1 line
Quoted 1 line
arch/arm/mach-omap2/sleep34xx.S:452: Error: selected processordoes not support ARM mode `smc #0'
Quoted 1 line
Quoted 1 line
arch/arm/mach-omap2/sleep34xx.S:458: Error: selected processordoes not support ARM mode `smc #0'
Quoted 1 line
Quoted 1 line
arch/arm/mach-omap2/sleep34xx.S:463: Error: selected processordoes not support ARM mode `smc #0'
Quoted 6 lines
Quoted 6 lines
make[2]: *** [
arch/arm/mach-omap2/sleep34xx.o] Error 1 make[1]: *** [arch/arm/mach-omap2] Error 2replacing in
arch/arm/mach-omap2/Makefile:Quoted 7 lines
Quoted 7 lines
AFLAGS_sleep24xx.o :=-Wa,-march=armv6
AFLAGS_sleep34xx.o :=-Wa,-march=armv7-ato:
AFLAGS_sleep24xx.o :=-Wa,-march=armv6
AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec)
Quoted 2 lines
Quoted 2 lines
helps compiling (see also:
Quoted 9 lines
Quoted 1 line
Care to post a patch for this and mention your compiler version
too?
Quoted 2 lines
Tony
patch attached.
i am using http://gitorious.org/linux-omap-dss2/linux with gcc- 4.5.2, binutils-2.21
Looks like I need to upgrade my gcc version. This is not seen with 4.3.3
Regards,
Santosh
Quoted 6 lines · Stephan Raue
Quoted 2 lines
Tony
patch attached.
i am using http://gitorious.org/linux-omap-dss2/linux with gcc-4.5.2, binutils-2.21
Still need a proper patch description and your Signed-off-by line :)
See Documentation/Submit* files in your kernel directory for more info.
Tony
Quoted 12 lines
diff -Naur linux-2.6.38-rc8/arch/arm/mach-omap2/Makefile linux-2.6.38-rc8.patch/arch/arm/mach-omap2/Makefile
arch/arm/mach-omap2/Makefile +1
-1@@ -68,7 +68,7 @@ obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3) += smartreflex-class3.o AFLAGS_sleep24xx.o :=-Wa,-march=armv6 -AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a +AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec) ifeq ($(CONFIG_PM_VERBOSE),y) CFLAGS_pm_bus.o += -DDEBUG