perl-native_5.10.1 fails
Hi all,
When trying to build an x11-image for pm9263 with angstrom-2010.x, perl-native fails to build.
The error is listed below. As far as I can tell, the problem is that a gcc flag is passed to the linker, -fstack-protector. I tried to find out where this -fstack-protector could come from, but the only trace I could find was in the Configure of perl-native itself. There is no mention that it is set when Configure is called in the configure step, nor in any of the environment variables during the do_configure or do_compile step.
I run Ubuntu 10.10 with gold as the linker. I thought that it might be the gold linker but neither gold nor ld seem to have this option when reviewing the man-page.
Regards,
Jan
| Running Makefile.PL in ext/DynaLoader
| ../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.so LINKTYPE=static
| Processing hints file hints/linux.pl
| Unrecognized argument in LIBS ignored:
'-Wl,-rpath-link,/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib' | Unrecognized argument in LIBS ignored:
'-Wl,-rpath,/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib'
| Unrecognized argument in LIBS ignored: '-Wl,-O1' | Unrecognized argument in LIBS ignored: '-fstack-protector' | Writing Makefile for DynaLoader | make[1]: Entering directory `/home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1/ext/DynaLoader' | make[1]: Leaving directory `/home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1/ext/DynaLoader' | Making all in ext/DynaLoader | make all PERL_CORE=1 LIBPERL_A=libperl.so LINKTYPE=static | make[1]: Entering directory `/home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1/ext/DynaLoader' | ../../miniperl "-I../../lib" "-I../../lib" DynaLoader_pm.PL DynaLoader.pm | ../../miniperl "-I../../lib" "-I../../lib" XSLoader_pm.PL XSLoader.pm | cp XSLoader.pm ../../lib/XSLoader.pm | cp DynaLoader.pm ../../lib/DynaLoader.pm | AutoSplitting ../../lib/DynaLoader.pm (../../lib/auto/DynaLoader) | rm -f DynaLoader.xs | cp dl_dlopen.xs DynaLoader.xs | ../../miniperl "-I../../lib" "-I../../lib" ../../lib/ExtUtils/xsubpp
-noprototypes -typemap ../../lib/ExtUtils/typemap DynaLoader.xs > DynaLoader.xsc && mv DynaLoader.xsc DynaLoader.c
| gcc -c -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe
-fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64 -O2 -DVERSION=\"1.10\" -DXS_VERSION=\"1.10\"
-fPIC "-I../.." -DLIBC="/lib/libc-2.12.1.so" DynaLoader.c
| rm -rf ../../DynaLoader.o | cp DynaLoader.o ../../DynaLoader.o | make[1]: Leaving directory
`/home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1/ext/DynaLoader' | rm -f libperl.so
| ld -o libperl.so -shared -O2 -L/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib
-L/usr/local/lib -fstack-protector op.o perl.o gv.o toke.o perly.o
pad.o regcomp.o dump.o util.o mg.o reentr.o mro.o hv.o av.o run.o
pp_hot.o sv.o pp.o scope.o pp_ctl.o pp_sys.o doop.o doio.o regexec.o
utf8.o taint.o deb.o universal.o xsutils.o globals.o perlio.o perlapi.o
numeric.o mathoms.o locale.o pp_pack.o pp_sort.o DynaLoader.o -lnsl
-ldl -lm -lcrypt -lutil -lpthread -lc
| ld: -fstack-protector: unknown option | ld: use the --help option for usage information | make: *** [libperl.so] Error 1 | + die 'oe_runmake failed' | + oefatal 'oe_runmake failed' | + echo FATAL: 'oe_runmake failed' | FATAL: oe_runmake failed | + exit 1
NOTE: package perl-native-5.10.1-r10: task do_compile: Failed
Quoted 11 lines · Jan Paesmans
Hi all,
When trying to build an x11-image for pm9263 with angstrom-2010.x, perl-native fails to build.
The error is listed below. As far as I can tell, the problem is that a gcc flag is passed to the linker, -fstack-protector. I tried to find out where this -fstack-protector could come from, but the only trace I could find was in the Configure of perl-native itself. There is no mention that it is set when Configure is called in the configure step, nor in any of the environment variables during thedo_configureordo_compilestep.
Quoted 3 lines
I run Ubuntu 10.10 with gold as the linker. I thought that it might be the gold linker but neither gold nor ld seem to have this option when reviewing the man-page.
Can you edit the recipe and add in:EXTRA_OEMAKE = 'LD="${CCLD}"'
And do a bitbake -c clean perl-native then bitbake perl-native Thanks.
Signature · 2 lines
Tom Rini Mentor Graphics Corporation
Quoted 17 lines · Tom Rini
Quoted 12 lines · Jan Paesmans
Hi all,
When trying to build an x11-image for pm9263 with angstrom-2010.x, perl-native fails to build.
The error is listed below. As far as I can tell, the problem is that a gcc flag is passed to the linker, -fstack-protector. I tried to find out where this -fstack-protector could come from, but the only trace I could find was in the Configure of perl-native itself. There is no mention that it is set when Configure is called in the configure step, nor in any of the environment variables during thedo_configureordo_compilestep.Quoted 3 lines
I run Ubuntu 10.10 with gold as the linker. I thought that it might be the gold linker but neither gold nor ld seem to have this option when reviewing the man-page.
Quoted 6 lines
Can you edit the recipe and add in:
EXTRA_OEMAKE= 'LD="${CCLD}"'And do a bitbake -c clean perl-native then bitbake perl-native Thanks.
That did the trick. Now perl-native compiles fine. However when I checked the output of the log.do_compile I did notice a change a the behaviour. I was expecting the -fstack-protector flag to be gone, instead it is still there. However, instead of invoking ld for the final link, now gcc is invoked. Below you can find the relevent section of the log file. Also in attachment is a patch with the change you suggested.
Thanks for the help.
Regards,
Jan
Running Makefile.PL in ext/DynaLoader
../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl
INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.so
LINKTYPE=static
Processing hints file hints/linux.pl
Unrecognized argument in LIBS ignored:
'-Wl,-rpath-link,/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib' Unrecognized argument in LIBS ignored:
'-Wl,-rpath,/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib' Unrecognized argument in LIBS ignored: '-Wl,-O1'
Unrecognized argument in LIBS ignored: '-fstack-protector'
Writing Makefile for DynaLoader
make[1]: Entering directory /home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1/ext/DynaLoader' make[1]: Leaving directory /home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1/ext/DynaLoader' Making all in ext/DynaLoader
make all PERL_CORE=1 LIBPERL_A=libperl.so LINKTYPE=static
make[1]: Entering directory `/home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1/ext/DynaLoader' ../../miniperl "-I../../lib" "-I../../lib" DynaLoader_pm.PL DynaLoader.pm
../../miniperl "-I../../lib" "-I../../lib" XSLoader_pm.PL XSLoader.pm
cp XSLoader.pm ../../lib/XSLoader.pm
cp DynaLoader.pm ../../lib/DynaLoader.pm
AutoSplitting ../../lib/DynaLoader.pm (../../lib/auto/DynaLoader)
rm -f DynaLoader.xs
cp dl_dlopen.xs DynaLoader.xs
../../miniperl "-I../../lib" "-I../../lib" ../../lib/ExtUtils/xsubpp
-noprototypes -typemap ../../lib/ExtUtils/typemap DynaLoader.xs >
DynaLoader.xsc && mv DynaLoader.xsc DynaLoader.c
gcc -c -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe
-fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64 -O2 -DVERSION=\"1.10\" -DXS_VERSION=\"1.10\"
-fPIC "-I../.." -DLIBC="/lib/libc-2.12.1.so" DynaLoader.c
rm -rf ../../DynaLoader.o
cp DynaLoader.o ../../DynaLoader.o
make[1]: Leaving directory `/home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1/ext/DynaLoader' rm -f libperl.so
gcc -o libperl.so -shared -O2 -L/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib
-L/usr/local/lib -fstack-protector op.o perl.o gv.o toke.o perly.o
pad.o regcomp.o dump.o util.o mg.o reentr.o mro.o hv.o av.o run.o
pp_hot.o sv.o pp.o scope.o pp_ctl.o pp_sys.o doop.o doio.o regexec.o
utf8.o taint.o deb.o universal.o xsutils.o globals.o perlio.o perlapi.o
numeric.o mathoms.o locale.o pp_pack.o pp_sort.o DynaLoader.o -lnsl
-ldl -lm -lcrypt -lutil -lpthread -lc LD_LIBRARY_PATH=/home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1 gcc -o perl
-L/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath-link,/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath,/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib
-Wl,-O1 -fstack-protector -L/usr/local/lib -Wl,-E -Wl,-rpath,/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib/perl/5.10.1/CORE perlmain.o libperl.so cat ext.libs -lnsl -ldl -lm -lcrypt -lutil
-lpthread -lc LD_LIBRARY_PATH=/home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1 ./miniperl -Ilib mkppport
running /home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1/miniperl -I../../lib PPPort_pm.PL
recipes/perl/perl-native_5.10.1.bb +2 -0
@@ -29,6 +29,8 @@ S = "${WORKDIR}/perl-${PV}" inherit native +EXTRA_OEMAKE = 'LD="${CCLD}"' + do_configure () { ./Configure \ -Dcc="${CC}" \
Quoted 24 lines · Jan Paesmans
Quoted 17 lines · Tom Rini
Quoted 12 lines · Jan Paesmans
Hi all,
When trying to build an x11-image for pm9263 with angstrom-2010.x, perl-native fails to build.
The error is listed below. As far as I can tell, the problem is that a gcc flag is passed to the linker, -fstack-protector. I tried to find out where this -fstack-protector could come from, but the only trace I could find was in the Configure of perl-native itself. There is no mention that it is set when Configure is called in the configure step, nor in any of the environment variables during thedo_configureordo_compilestep.Quoted 3 lines
I run Ubuntu 10.10 with gold as the linker. I thought that it might be the gold linker but neither gold nor ld seem to have this option when reviewing the man-page.
Quoted 6 lines
Can you edit the recipe and add in:
EXTRA_OEMAKE= 'LD="${CCLD}"'And do a bitbake -c clean perl-native then bitbake perl-native Thanks.
Quoted 6 lines
That did the trick. Now perl-native compiles fine. However when I checked the output of the log.do_compile I did notice a change a the behaviour. I was expecting the -fstack-protector flag to be gone, instead it is still there. However, instead of invoking ld for the final link, now gcc is invoked. Below you can find the relevent section of the log file. Also in attachment is a patch with the change you suggested.
OK, thanks. I'll put this into a patch this weekend. What's going on is that while I'm not sure where -fstack-protector is coming from (but it's a useful flag), as you saw, 'ld' chokes on it. But for linking you shouldn't really ever invoke ld directly but rather via gcc, so passing LD=${CCLD} overrides perl's makefiles and we invoke gcc as the linker and it handles the flag right in this case.
Quoted 75 lines
Thanks for the help.
Regards,Jan
Running Makefile.PL in ext/DynaLoader
../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl
INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.so
LINKTYPE=static
Processing hints filehints/linux.pl
Unrecognized argument in LIBS ignored:
'-Wl,-rpath-link,/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib' Unrecognized argument in LIBS ignored:
'-Wl,-rpath,/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib' Unrecognized argument in LIBS ignored: '-Wl,-O1'
Unrecognized argument in LIBS ignored: '-fstack-protector'
WritingMakefilefor DynaLoader
make[1]: Entering directory/home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1/ext/DynaLoader' make[1]: Leaving directory/home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1/ext/DynaLoader' Making all in ext/DynaLoader
make all PERL_CORE=1 LIBPERL_A=libperl.so LINKTYPE=static
make[1]: Entering directory `/home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1/ext/DynaLoader' ../../miniperl "-I../../lib" "-I../../lib" DynaLoader_pm.PL DynaLoader.pm
../../miniperl "-I../../lib" "-I../../lib" XSLoader_pm.PL XSLoader.pm
cp XSLoader.pm ../../lib/XSLoader.pm
cp DynaLoader.pm ../../lib/DynaLoader.pm
AutoSplitting ../../lib/DynaLoader.pm (../../lib/auto/DynaLoader)
rm -f DynaLoader.xs
cp dl_dlopen.xs DynaLoader.xs
../../miniperl "-I../../lib" "-I../../lib" ../../lib/ExtUtils/xsubpp
-noprototypes -typemap ../../lib/ExtUtils/typemap DynaLoader.xs>
DynaLoader.xsc&& mv DynaLoader.xscDynaLoader.c
gcc -c -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe(quoted diff) +0
-3-fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -DVERSION=\"1.10\" -DXS_VERSION=\"1.10\" -fPIC "-I../.." -DLIBC="/lib/libc-2.12.1.so" DynaLoader.crm -rf
../../DynaLoader.o
cp DynaLoader.o../../DynaLoader.o
make[1]: Leaving directory `/home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1/ext/DynaLoader' rm -f libperl.so
gcc -o libperl.so -shared -O2(quoted diff) +0
-2-L/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib -L/usr/local/lib -fstack-protector op.o perl.o gv.o toke.o perly.opad.o regcomp.o dump.o util.o mg.o reentr.o mro.o hv.o av.o run.o
pp_hot.o sv.o pp.o scope.o pp_ctl.o pp_sys.o doop.o doio.o regexec.o
utf8.o taint.o deb.o universal.o xsutils.o globals.o perlio.o perlapi.o
numeric.o mathoms.o locale.o pp_pack.o pp_sort.o DynaLoader.o -lnsl
-ldl -lm -lcrypt -lutil -lpthread -lc LD_LIBRARY_PATH=/home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1 gcc -o perl(quoted diff) +0
-5-L/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath-link,/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath,/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib -Wl,-O1 -fstack-protector -L/usr/local/lib -Wl,-E -Wl,-rpath,/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib/perl/5.10.1/COREperlmain.o libperl.so
cat ext.libs-lnsl -ldl -lm -lcrypt -lutil
-lpthread -lc LD_LIBRARY_PATH=/home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1 ./miniperl -Ilib mkppport
running/home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1/miniperl-I../../lib PPPort_pm.PL_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
Signature · 2 lines
Tom Rini Mentor Graphics Corporation
Quoted 15 lines · Tom Rini
Quoted 14 lines · Jan Paesmans
Quoted 13 lines · Tom Rini
Quoted 12 lines · Jan Paesmans
Hi all,
When trying to build an x11-image for pm9263 with angstrom-2010.x, perl-native fails to build.
The error is listed below. As far as I can tell, the problem is that a gcc flag is passed to the linker, -fstack-protector. I tried to find out where this -fstack-protector could come from, but the only trace I could find was in the Configure of perl-native itself. There is no mention that it is set when Configure is called in the configure step, nor in any of the environment variables during thedo_configureordo_compilestep.
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 3 lines
I run Ubuntu 10.10 with gold as the linker. I thought that it might be the gold linker but neither gold nor ld seem to have this option when reviewing the man-page.
Can you edit the recipe and add in:
EXTRA_OEMAKE= 'LD="${CCLD}"'
actually when inheriting native it export LD=ld in envronment and thats whats used in makefiles
You could try setting
export LD=${CC}
just after inherit native in the perl-native recipe
I have a simialr fix lined up for oe-core
Quoted 102 lines
Quoted 9 lines
Quoted 3 lines
And do a bitbake -c clean perl-native then bitbake perl-native Thanks.
That did the trick. Now perl-native compiles fine. However when I checked the output of the log.do_compile I did notice a change a the behaviour. I was expecting the -fstack-protector flag to be gone, instead it is still there. However, instead of invoking ld for the final link, now gcc is invoked. Below you can find the relevent section of the log file. Also in attachment is a patch with the change you suggested.
OK, thanks. I'll put this into a patch this weekend. What's going on is that while I'm not sure where -fstack-protector is coming from (but it's a useful flag), as you saw, 'ld' chokes on it. But for linking you shouldn't really ever invoke ld directly but rather via gcc, so passing LD=${CCLD} overrides perl's makefiles and we invoke gcc as the linker and it handles the flag right in this case.
Quoted 75 lines
Thanks for the help.
Regards,Jan
Running Makefile.PL in ext/DynaLoader
../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl
INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.so
LINKTYPE=static
Processing hints filehints/linux.pl
Unrecognized argument in LIBS ignored:
'-Wl,-rpath-link,/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib' Unrecognized argument in LIBS ignored:
'-Wl,-rpath,/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib' Unrecognized argument in LIBS ignored: '-Wl,-O1'
Unrecognized argument in LIBS ignored: '-fstack-protector'
WritingMakefilefor DynaLoader
make[1]: Entering directory/home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1/ext/DynaLoader' make[1]: Leaving directory/home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1/ext/DynaLoader' Making all in ext/DynaLoader
make all PERL_CORE=1 LIBPERL_A=libperl.so LINKTYPE=static
make[1]: Entering directory `/home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1/ext/DynaLoader' ../../miniperl "-I../../lib" "-I../../lib" DynaLoader_pm.PL DynaLoader.pm
../../miniperl "-I../../lib" "-I../../lib" XSLoader_pm.PL XSLoader.pm
cp XSLoader.pm ../../lib/XSLoader.pm
cp DynaLoader.pm ../../lib/DynaLoader.pm
AutoSplitting ../../lib/DynaLoader.pm (../../lib/auto/DynaLoader)
rm -f DynaLoader.xs
cp dl_dlopen.xs DynaLoader.xs
../../miniperl "-I../../lib" "-I../../lib" ../../lib/ExtUtils/xsubpp
-noprototypes -typemap ../../lib/ExtUtils/typemap DynaLoader.xs>
DynaLoader.xsc&& mv DynaLoader.xscDynaLoader.c
gcc -c -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe(quoted diff) +0
-3-fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -DVERSION=\"1.10\" -DXS_VERSION=\"1.10\" -fPIC "-I../.." -DLIBC="/lib/libc-2.12.1.so" DynaLoader.crm -rf
../../DynaLoader.o
cp DynaLoader.o../../DynaLoader.o
make[1]: Leaving directory `/home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1/ext/DynaLoader' rm -f libperl.so
gcc -o libperl.so -shared -O2(quoted diff) +0
-2-L/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib -L/usr/local/lib -fstack-protector op.o perl.o gv.o toke.o perly.opad.o regcomp.o dump.o util.o mg.o reentr.o mro.o hv.o av.o run.o
pp_hot.o sv.o pp.o scope.o pp_ctl.o pp_sys.o doop.o doio.o regexec.o
utf8.o taint.o deb.o universal.o xsutils.o globals.o perlio.o perlapi.o
numeric.o mathoms.o locale.o pp_pack.o pp_sort.o DynaLoader.o -lnsl
-ldl -lm -lcrypt -lutil -lpthread -lc LD_LIBRARY_PATH=/home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1 gcc -o perl(quoted diff) +0
-5-L/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath-link,/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath,/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib -Wl,-O1 -fstack-protector -L/usr/local/lib -Wl,-E -Wl,-rpath,/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib/perl/5.10.1/COREperlmain.o libperl.so
cat ext.libs-lnsl -ldl -lm -lcrypt -lutil
-lpthread -lc LD_LIBRARY_PATH=/home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1 ./miniperl -Ilib mkppport
running/home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1/miniperl-I../../lib PPPort_pm.PL_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-develSignature · 7 lines
Tom Rini Mentor Graphics Corporation _______________________________________________ Openembedded-devel mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
Signature · 1 line
-Khem
Quoted 25 lines · Khem Raj
Quoted 16 lines · Tom Rini
Quoted 15 lines · Jan Paesmans
Quoted 14 lines · Tom Rini
Quoted 13 lines · Jan Paesmans
Hi all,
When trying to build an x11-image for pm9263 with angstrom-2010.x, perl-native fails to build. The error is listed below. As far as I can tell, the problem is that a gcc flag is passed to the linker, -fstack-protector. I tried to find out where this -fstack-protector could come from, but the only trace I could find was in the Configure of perl-native itself. There is no mention that it is set when Configure is called in the configure step, nor in any of the environment variables during the
do_configureordo_compilestep.Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 3 lines
I run Ubuntu 10.10 with gold as the linker. I thought that it might be the gold linker but neither gold nor ld seem to have this option when reviewing the man-page.
Can you edit the recipe and add in:
EXTRA_OEMAKE= 'LD="${CCLD}"'
Quoted 8 lines
actually when inheriting native it export LD=ld in envronment and thats whats used in makefiles
You could try setting
export LD=${CC} just after inherit native in the perl-native recipe
I have a simialr fix lined up for oe-core
sorry for the late reply.
Khem's solution also seems to work. I did a 'bitbake -c clean perl-native && bitbake perl-native' with the other suggestion and that succeeded. However the EXTRA_OEMAKE seems cleaner.
Regards,
Jan
Quoted 23 lines
Quoted 23 lines
Quoted 10 lines
Quoted 3 lines
And do a bitbake -c clean perl-native then bitbake perl-native Thanks.
That did the trick. Now perl-native compiles fine. However when I checked the output of the log.do_compile I did notice a change a the behaviour. I was expecting the -fstack-protector flag to be gone, instead it is still there. However, instead of invoking ld for the final link, now gcc is invoked. Below you can find the relevent section of the log file. Also in attachment is a patch with the change you suggested.
OK, thanks. I'll put this into a patch this weekend. What's going on is that while I'm not sure where -fstack-protector is coming from (but it's a useful flag), as you saw, 'ld' chokes on it. But for linking you shouldn't really ever invoke ld directly but rather via gcc, so passing LD=${CCLD} overrides perl's makefiles and we invoke gcc as the linker and it handles the flag right in this case.
Quoted 4 lines
Thanks for the help. Regards,
Jan