Skip to contentSkip to conversation

perl-native_5.10.1 fails

DISCUSSION Jan Paesmans 3 participants 6 messages Mar 16, 2011 – Mar 22, 2011

lore
Share & tools
lore
#0 lore raw

Hi all,

When trying to build an x11-image for pm9263 with angstrom-2010.x, perl-native fails to build.
The error is listed below. As far as I can tell, the problem is that a gcc flag is passed to the linker, -fstack-protector. I tried to find out where this -fstack-protector could come from, but the only trace I could find was in the Configure of perl-native itself. There is no mention that it is set when Configure is called in the configure step, nor in any of the environment variables during the do_configure or do_compile step.

I run Ubuntu 10.10 with gold as the linker. I thought that it might be the gold linker but neither gold nor ld seem to have this option when reviewing the man-page.

Regards,

Jan

| Running Makefile.PL in ext/DynaLoader
| ../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.so LINKTYPE=static
| Processing hints file hints/linux.pl
| Unrecognized argument in LIBS ignored:
'-Wl,-rpath-link,/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib' | Unrecognized argument in LIBS ignored:
'-Wl,-rpath,/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib'

| Unrecognized argument in LIBS ignored: '-Wl,-O1'
| Unrecognized argument in LIBS ignored: '-fstack-protector'
| Writing Makefile for DynaLoader
| make[1]: Entering directory
`/home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1/ext/DynaLoader'
| make[1]: Leaving directory
`/home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1/ext/DynaLoader'
| Making all in ext/DynaLoader
|  make all PERL_CORE=1 LIBPERL_A=libperl.so LINKTYPE=static
| make[1]: Entering directory
`/home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1/ext/DynaLoader'
| ../../miniperl "-I../../lib" "-I../../lib" DynaLoader_pm.PL DynaLoader.pm
| ../../miniperl "-I../../lib" "-I../../lib" XSLoader_pm.PL XSLoader.pm
| cp XSLoader.pm ../../lib/XSLoader.pm
| cp DynaLoader.pm ../../lib/DynaLoader.pm
| AutoSplitting ../../lib/DynaLoader.pm (../../lib/auto/DynaLoader)
| rm -f DynaLoader.xs
| cp dl_dlopen.xs DynaLoader.xs
| ../../miniperl "-I../../lib" "-I../../lib" ../../lib/ExtUtils/xsubpp

-noprototypes -typemap ../../lib/ExtUtils/typemap DynaLoader.xs > DynaLoader.xsc && mv DynaLoader.xsc DynaLoader.c
| gcc -c -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe
-fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64 -O2 -DVERSION=\"1.10\" -DXS_VERSION=\"1.10\"
-fPIC "-I../.." -DLIBC="/lib/libc-2.12.1.so" DynaLoader.c

| rm -rf ../../DynaLoader.o
| cp DynaLoader.o ../../DynaLoader.o
| make[1]: Leaving directory

`/home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1/ext/DynaLoader' | rm -f libperl.so
| ld -o libperl.so -shared -O2 -L/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib
-L/usr/local/lib -fstack-protector op.o perl.o gv.o toke.o perly.o
pad.o regcomp.o dump.o util.o mg.o reentr.o mro.o hv.o av.o run.o
pp_hot.o sv.o pp.o scope.o pp_ctl.o pp_sys.o doop.o doio.o regexec.o
utf8.o taint.o deb.o universal.o xsutils.o globals.o perlio.o perlapi.o
numeric.o mathoms.o locale.o pp_pack.o pp_sort.o DynaLoader.o -lnsl
-ldl -lm -lcrypt -lutil -lpthread -lc

| ld: -fstack-protector: unknown option
| ld: use the --help option for usage information
| make: *** [libperl.so] Error 1
| + die 'oe_runmake failed'
| + oefatal 'oe_runmake failed'
| + echo FATAL: 'oe_runmake failed'
| FATAL: oe_runmake failed
| + exit 1

NOTE: package perl-native-5.10.1-r10: task do_compile: Failed

#1 lore raw
Quoted 11 lines · Jan Paesmans

Hi all,

When trying to build an x11-image for pm9263 with angstrom-2010.x, perl-native fails to build.
The error is listed below. As far as I can tell, the problem is that a gcc flag is passed to the linker, -fstack-protector. I tried to find out where this -fstack-protector could come from, but the only trace I could find was in the Configure of perl-native itself. There is no mention that it is set when Configure is called in the configure step, nor in any of the environment variables during the do_configure or do_compile step.

Quoted 3 lines

I run Ubuntu 10.10 with gold as the linker. I thought that it might be the gold linker but neither gold nor ld seem to have this option when reviewing the man-page.

Can you edit the recipe and add in:
EXTRA_OEMAKE = 'LD="${CCLD}"'

And do a bitbake -c clean perl-native then bitbake perl-native Thanks.

Signature · 2 lines
Tom Rini
Mentor Graphics Corporation
#2 lore raw
Quoted 17 lines · Tom Rini
Quoted 12 lines · Jan Paesmans

Hi all,

When trying to build an x11-image for pm9263 with angstrom-2010.x, perl-native fails to build.
The error is listed below. As far as I can tell, the problem is that a gcc flag is passed to the linker, -fstack-protector. I tried to find out where this -fstack-protector could come from, but the only trace I could find was in the Configure of perl-native itself. There is no mention that it is set when Configure is called in the configure step, nor in any of the environment variables during the do_configure or do_compile step.

Quoted 3 lines

I run Ubuntu 10.10 with gold as the linker. I thought that it might be the gold linker but neither gold nor ld seem to have this option when reviewing the man-page.

Quoted 6 lines

Can you edit the recipe and add in:
EXTRA_OEMAKE = 'LD="${CCLD}"'

And do a bitbake -c clean perl-native then bitbake perl-native Thanks.

That did the trick. Now perl-native compiles fine. However when I checked the output of the log.do_compile I did notice a change a the behaviour. I was expecting the -fstack-protector flag to be gone, instead it is still there. However, instead of invoking ld for the final link, now gcc is invoked. Below you can find the relevent section of the log file. Also in attachment is a patch with the change you suggested.

Thanks for the help.
Regards,

Jan

Running Makefile.PL in ext/DynaLoader
../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl
INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.so
LINKTYPE=static
Processing hints file hints/linux.pl
Unrecognized argument in LIBS ignored:
'-Wl,-rpath-link,/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib' Unrecognized argument in LIBS ignored:
'-Wl,-rpath,/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib' Unrecognized argument in LIBS ignored: '-Wl,-O1'
Unrecognized argument in LIBS ignored: '-fstack-protector'
Writing Makefile for DynaLoader
make[1]: Entering directory /home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1/ext/DynaLoader' make[1]: Leaving directory /home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1/ext/DynaLoader' Making all in ext/DynaLoader
make all PERL_CORE=1 LIBPERL_A=libperl.so LINKTYPE=static
make[1]: Entering directory `/home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1/ext/DynaLoader' ../../miniperl "-I../../lib" "-I../../lib" DynaLoader_pm.PL DynaLoader.pm
../../miniperl "-I../../lib" "-I../../lib" XSLoader_pm.PL XSLoader.pm
cp XSLoader.pm ../../lib/XSLoader.pm
cp DynaLoader.pm ../../lib/DynaLoader.pm
AutoSplitting ../../lib/DynaLoader.pm (../../lib/auto/DynaLoader)
rm -f DynaLoader.xs
cp dl_dlopen.xs DynaLoader.xs
../../miniperl "-I../../lib" "-I../../lib" ../../lib/ExtUtils/xsubpp
-noprototypes -typemap ../../lib/ExtUtils/typemap DynaLoader.xs >
DynaLoader.xsc && mv DynaLoader.xsc DynaLoader.c
gcc -c -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe
-fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64 -O2 -DVERSION=\"1.10\" -DXS_VERSION=\"1.10\"
-fPIC "-I../.." -DLIBC="/lib/libc-2.12.1.so" DynaLoader.c
rm -rf ../../DynaLoader.o
cp DynaLoader.o ../../DynaLoader.o
make[1]: Leaving directory `/home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1/ext/DynaLoader' rm -f libperl.so
gcc -o libperl.so -shared -O2 -L/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib
-L/usr/local/lib -fstack-protector op.o perl.o gv.o toke.o perly.o
pad.o regcomp.o dump.o util.o mg.o reentr.o mro.o hv.o av.o run.o
pp_hot.o sv.o pp.o scope.o pp_ctl.o pp_sys.o doop.o doio.o regexec.o
utf8.o taint.o deb.o universal.o xsutils.o globals.o perlio.o perlapi.o
numeric.o mathoms.o locale.o pp_pack.o pp_sort.o DynaLoader.o -lnsl
-ldl -lm -lcrypt -lutil -lpthread -lc LD_LIBRARY_PATH=/home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1 gcc -o perl
-L/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath-link,/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath,/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib
-Wl,-O1 -fstack-protector -L/usr/local/lib -Wl,-E -Wl,-rpath,/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib/perl/5.10.1/CORE perlmain.o libperl.so cat ext.libs -lnsl -ldl -lm -lcrypt -lutil
-lpthread -lc LD_LIBRARY_PATH=/home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1 ./miniperl -Ilib mkppport
running /home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1/miniperl -I../../lib PPPort_pm.PL

recipes/perl/perl-native_5.10.1.bb +2 -0
index 5aa0c7b..586fcbd 100644
@@ -29,6 +29,8 @@ S = "${WORKDIR}/perl-${PV}"
 
 inherit native
 
+EXTRA_OEMAKE = 'LD="${CCLD}"'
+
 do_configure () {
     ./Configure \
         -Dcc="${CC}" \
#3 lore raw
Quoted 24 lines · Jan Paesmans
Quoted 17 lines · Tom Rini
Quoted 12 lines · Jan Paesmans

Hi all,

When trying to build an x11-image for pm9263 with angstrom-2010.x, perl-native fails to build.
The error is listed below. As far as I can tell, the problem is that a gcc flag is passed to the linker, -fstack-protector. I tried to find out where this -fstack-protector could come from, but the only trace I could find was in the Configure of perl-native itself. There is no mention that it is set when Configure is called in the configure step, nor in any of the environment variables during the do_configure or do_compile step.

Quoted 3 lines

I run Ubuntu 10.10 with gold as the linker. I thought that it might be the gold linker but neither gold nor ld seem to have this option when reviewing the man-page.

Quoted 6 lines

Can you edit the recipe and add in:
EXTRA_OEMAKE = 'LD="${CCLD}"'

And do a bitbake -c clean perl-native then bitbake perl-native Thanks.

Quoted 6 lines

That did the trick. Now perl-native compiles fine. However when I checked the output of the log.do_compile I did notice a change a the behaviour. I was expecting the -fstack-protector flag to be gone, instead it is still there. However, instead of invoking ld for the final link, now gcc is invoked. Below you can find the relevent section of the log file. Also in attachment is a patch with the change you suggested.

OK, thanks. I'll put this into a patch this weekend. What's going on is that while I'm not sure where -fstack-protector is coming from (but it's a useful flag), as you saw, 'ld' chokes on it. But for linking you shouldn't really ever invoke ld directly but rather via gcc, so passing LD=${CCLD} overrides perl's makefiles and we invoke gcc as the linker and it handles the flag right in this case.

Quoted 75 lines

Thanks for the help.
Regards,

Jan

Running Makefile.PL in ext/DynaLoader
../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl
INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.so
LINKTYPE=static
Processing hints file hints/linux.pl
Unrecognized argument in LIBS ignored:
'-Wl,-rpath-link,/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib' Unrecognized argument in LIBS ignored:
'-Wl,-rpath,/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib' Unrecognized argument in LIBS ignored: '-Wl,-O1'
Unrecognized argument in LIBS ignored: '-fstack-protector'
Writing Makefile for DynaLoader
make[1]: Entering directory /home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1/ext/DynaLoader' make[1]: Leaving directory /home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1/ext/DynaLoader' Making all in ext/DynaLoader
make all PERL_CORE=1 LIBPERL_A=libperl.so LINKTYPE=static
make[1]: Entering directory `/home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1/ext/DynaLoader' ../../miniperl "-I../../lib" "-I../../lib" DynaLoader_pm.PL DynaLoader.pm
../../miniperl "-I../../lib" "-I../../lib" XSLoader_pm.PL XSLoader.pm
cp XSLoader.pm ../../lib/XSLoader.pm
cp DynaLoader.pm ../../lib/DynaLoader.pm
AutoSplitting ../../lib/DynaLoader.pm (../../lib/auto/DynaLoader)
rm -f DynaLoader.xs
cp dl_dlopen.xs DynaLoader.xs
../../miniperl "-I../../lib" "-I../../lib" ../../lib/ExtUtils/xsubpp
-noprototypes -typemap ../../lib/ExtUtils/typemap DynaLoader.xs>
DynaLoader.xsc&& mv DynaLoader.xsc DynaLoader.c
gcc -c -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe

(quoted diff) +0 -3
-fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64 -O2   -DVERSION=\"1.10\" -DXS_VERSION=\"1.10\"
-fPIC "-I../.."  -DLIBC="/lib/libc-2.12.1.so" DynaLoader.c

rm -rf ../../DynaLoader.o
cp DynaLoader.o ../../DynaLoader.o
make[1]: Leaving directory `/home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1/ext/DynaLoader' rm -f libperl.so
gcc -o libperl.so -shared -O2

(quoted diff) +0 -2
-L/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib
-L/usr/local/lib -fstack-protector op.o perl.o   gv.o toke.o perly.o

pad.o regcomp.o dump.o util.o mg.o reentr.o mro.o hv.o av.o run.o
pp_hot.o sv.o pp.o scope.o pp_ctl.o pp_sys.o doop.o doio.o regexec.o
utf8.o taint.o deb.o universal.o xsutils.o globals.o perlio.o perlapi.o
numeric.o mathoms.o locale.o pp_pack.o pp_sort.o DynaLoader.o -lnsl
-ldl -lm -lcrypt -lutil -lpthread -lc LD_LIBRARY_PATH=/home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1 gcc -o perl

(quoted diff) +0 -5
-L/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib
-Wl,-rpath-link,/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib
-Wl,-rpath,/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib
-Wl,-O1 -fstack-protector -L/usr/local/lib -Wl,-E
-Wl,-rpath,/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib/perl/5.10.1/CORE

perlmain.o libperl.so cat ext.libs -lnsl -ldl -lm -lcrypt -lutil
-lpthread -lc LD_LIBRARY_PATH=/home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1 ./miniperl -Ilib mkppport
running /home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1/miniperl -I../../lib PPPort_pm.PL

_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel

Signature · 2 lines
Tom Rini
Mentor Graphics Corporation
#4 lore raw
Quoted 15 lines · Tom Rini
Quoted 14 lines · Jan Paesmans
Quoted 13 lines · Tom Rini
Quoted 12 lines · Jan Paesmans

Hi all,

When trying to build an x11-image for pm9263 with angstrom-2010.x, perl-native fails to build.
The error is listed below. As far as I can tell, the problem is that a gcc flag is passed to the linker, -fstack-protector. I tried to find out where this -fstack-protector could come from, but the only trace I could find was in the Configure of perl-native itself. There is no mention that it is set when Configure is called in the configure step, nor in any of the environment variables during the do_configure or do_compile step.

Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 3 lines

I run Ubuntu 10.10 with gold as the linker. I thought that it might be the gold linker but neither gold nor ld seem to have this option when reviewing the man-page.

Can you edit the recipe and add in:
EXTRA_OEMAKE = 'LD="${CCLD}"'

actually when inheriting native it export LD=ld in envronment and thats whats used in makefiles

You could try setting

export LD=${CC}
just after inherit native in the perl-native recipe

I have a simialr fix lined up for oe-core

Quoted 102 lines
Quoted 9 lines
Quoted 3 lines

And do a bitbake -c clean perl-native then bitbake perl-native Thanks.

That did the trick. Now perl-native compiles fine. However when I checked the output of the log.do_compile I did notice a change a the behaviour. I was expecting the -fstack-protector flag to be gone, instead it is still there. However, instead of invoking ld for the final link, now gcc is invoked. Below you can find the relevent section of the log file. Also in attachment is a patch with the change you suggested.

OK, thanks. I'll put this into a patch this weekend. What's going on is that while I'm not sure where -fstack-protector is coming from (but it's a useful flag), as you saw, 'ld' chokes on it. But for linking you shouldn't really ever invoke ld directly but rather via gcc, so passing LD=${CCLD} overrides perl's makefiles and we invoke gcc as the linker and it handles the flag right in this case.

Quoted 75 lines

Thanks for the help.
Regards,

Jan

Running Makefile.PL in ext/DynaLoader
../../miniperl -I../../lib Makefile.PL INSTALLDIRS=perl
INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.so
LINKTYPE=static
Processing hints file hints/linux.pl
Unrecognized argument in LIBS ignored:
'-Wl,-rpath-link,/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib' Unrecognized argument in LIBS ignored:
'-Wl,-rpath,/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib' Unrecognized argument in LIBS ignored: '-Wl,-O1'
Unrecognized argument in LIBS ignored: '-fstack-protector'
Writing Makefile for DynaLoader
make[1]: Entering directory /home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1/ext/DynaLoader' make[1]: Leaving directory /home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1/ext/DynaLoader' Making all in ext/DynaLoader
make all PERL_CORE=1 LIBPERL_A=libperl.so LINKTYPE=static
make[1]: Entering directory `/home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1/ext/DynaLoader' ../../miniperl "-I../../lib" "-I../../lib" DynaLoader_pm.PL DynaLoader.pm
../../miniperl "-I../../lib" "-I../../lib" XSLoader_pm.PL XSLoader.pm
cp XSLoader.pm ../../lib/XSLoader.pm
cp DynaLoader.pm ../../lib/DynaLoader.pm
AutoSplitting ../../lib/DynaLoader.pm (../../lib/auto/DynaLoader)
rm -f DynaLoader.xs
cp dl_dlopen.xs DynaLoader.xs
../../miniperl "-I../../lib" "-I../../lib" ../../lib/ExtUtils/xsubpp
-noprototypes -typemap ../../lib/ExtUtils/typemap DynaLoader.xs>
DynaLoader.xsc&& mv DynaLoader.xsc DynaLoader.c
gcc -c -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe

(quoted diff) +0 -3
-fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64 -O2   -DVERSION=\"1.10\" -DXS_VERSION=\"1.10\"
-fPIC "-I../.."  -DLIBC="/lib/libc-2.12.1.so" DynaLoader.c

rm -rf ../../DynaLoader.o
cp DynaLoader.o ../../DynaLoader.o
make[1]: Leaving directory `/home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1/ext/DynaLoader' rm -f libperl.so
gcc -o libperl.so -shared -O2

(quoted diff) +0 -2
-L/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib
-L/usr/local/lib -fstack-protector op.o perl.o   gv.o toke.o perly.o

pad.o regcomp.o dump.o util.o mg.o reentr.o mro.o hv.o av.o run.o
pp_hot.o sv.o pp.o scope.o pp_ctl.o pp_sys.o doop.o doio.o regexec.o
utf8.o taint.o deb.o universal.o xsutils.o globals.o perlio.o perlapi.o
numeric.o mathoms.o locale.o pp_pack.o pp_sort.o DynaLoader.o -lnsl
-ldl -lm -lcrypt -lutil -lpthread -lc LD_LIBRARY_PATH=/home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1 gcc -o perl

(quoted diff) +0 -5
-L/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib
-Wl,-rpath-link,/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib
-Wl,-rpath,/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib
-Wl,-O1 -fstack-protector -L/usr/local/lib -Wl,-E
-Wl,-rpath,/home/janp/src/openembedded/build/tmp/sysroots/x86_64-linux/usr/lib/perl/5.10.1/CORE

perlmain.o libperl.so cat ext.libs -lnsl -ldl -lm -lcrypt -lutil
-lpthread -lc LD_LIBRARY_PATH=/home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1 ./miniperl -Ilib mkppport
running /home/janp/src/openembedded/build/tmp/work/x86_64-linux/perl-native-5.10.1-r10/perl-5.10.1/miniperl -I../../lib PPPort_pm.PL

_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel

Signature · 7 lines
Tom Rini
Mentor Graphics Corporation

_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
Signature · 1 line
-Khem
#5 lore raw
Quoted 25 lines · Khem Raj
Quoted 16 lines · Tom Rini
Quoted 15 lines · Jan Paesmans
Quoted 14 lines · Tom Rini
Quoted 13 lines · Jan Paesmans

Hi all,

When trying to build an x11-image for pm9263 with angstrom-2010.x, perl-native fails to build. The error is listed below. As far as I can tell, the problem is that a gcc flag is passed to the linker, -fstack-protector. I tried to find out where this -fstack-protector could come from, but the only trace I could find was in the Configure of perl-native itself. There is no mention that it is set when Configure is called in the configure step, nor in any of the environment variables during the do_configure or do_compile step.

Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 3 lines

I run Ubuntu 10.10 with gold as the linker. I thought that it might be the gold linker but neither gold nor ld seem to have this option when reviewing the man-page.

Can you edit the recipe and add in: EXTRA_OEMAKE = 'LD="${CCLD}"'

Quoted 8 lines

actually when inheriting native it export LD=ld in envronment and thats whats used in makefiles

You could try setting

export LD=${CC} just after inherit native in the perl-native recipe

I have a simialr fix lined up for oe-core

sorry for the late reply.
Khem's solution also seems to work. I did a 'bitbake -c clean perl-native && bitbake perl-native' with the other suggestion and that succeeded. However the EXTRA_OEMAKE seems cleaner.

Regards,

Jan

Quoted 23 lines
Quoted 23 lines
Quoted 10 lines
Quoted 3 lines

And do a bitbake -c clean perl-native then bitbake perl-native Thanks.

That did the trick. Now perl-native compiles fine. However when I checked the output of the log.do_compile I did notice a change a the behaviour. I was expecting the -fstack-protector flag to be gone, instead it is still there. However, instead of invoking ld for the final link, now gcc is invoked. Below you can find the relevent section of the log file. Also in attachment is a patch with the change you suggested.

OK, thanks. I'll put this into a patch this weekend. What's going on is that while I'm not sure where -fstack-protector is coming from (but it's a useful flag), as you saw, 'ld' chokes on it. But for linking you shouldn't really ever invoke ld directly but rather via gcc, so passing LD=${CCLD} overrides perl's makefiles and we invoke gcc as the linker and it handles the flag right in this case.

Quoted 4 lines

Thanks for the help. Regards,

Jan