meta: Add cedartrail

From: Rahul Saxena <[email protected]>

This is the initial version of a BSP for the Cedar Trail platform. The Cedar Trail platform consists of the Intel Cedarview Atom processor and Tiger Point Chipset. I have succesfully booted Sato image on Cedar Trail CRB, desktop and mobile pre-production sample boards and tested features such as wired networking, VESA graphics, SATA, USB ports

Please pull into linux-yocto-3.0/meta and linux-yocto-dev/meta

Also, please create a new "yocto/standard/cedarview" machine branch in each of the above, based on yocto/standard/base.

Thanks
Rahul

Signed=off-by: Rahul Saxena <[email protected]>
---

The following changes since commit caa74f86f42f6ecc22c3e9f380176b2695579e18:
Darren Hart (1):
Add EFI scc and cfg files

are available in the git repository at:

git://git.yoctoproject.org/linux-yocto-2.6.37-contrib rsaxena/meta-cedartrail
http://git.yoctoproject.org/cgit.cgi/linux-yocto-2.6.37-contrib/log/?h=rsaxena/meta-cedartrail

Rahul Saxena (1):
meta: Add cedartrail Signed-off-by: Rahul Saxena
<[email protected]>

 .../bsp/cedartrail/cedartrail-preempt-rt.scc       |    7 +++
 .../bsp/cedartrail/cedartrail-standard.scc         |    7 +++
 .../cfg/kernel-cache/bsp/cedartrail/cedartrail.cfg |   58 ++++++++++++++++++++
 .../cfg/kernel-cache/bsp/cedartrail/cedartrail.scc |   17 ++++++
 4 files changed, 89 insertions(+), 0 deletions(-)
 create mode 100755 meta/cfg/kernel-cache/bsp/cedartrail/cedartrail-preempt-rt.scc
 create mode 100755 meta/cfg/kernel-cache/bsp/cedartrail/cedartrail-standard.scc
 create mode 100755 meta/cfg/kernel-cache/bsp/cedartrail/cedartrail.cfg
 create mode 100755 meta/cfg/kernel-cache/bsp/cedartrail/cedartrail.scc

From: Rahul Saxena <[email protected]>

Add cedartrail.cfg, cedartrail.scc, cedartrail-standard.scc, cedartrail-preempt-rt.scc

---
 .../bsp/cedartrail/cedartrail-preempt-rt.scc       |    7 +++
 .../bsp/cedartrail/cedartrail-standard.scc         |    7 +++
 .../cfg/kernel-cache/bsp/cedartrail/cedartrail.cfg |   58 ++++++++++++++++++++
 .../cfg/kernel-cache/bsp/cedartrail/cedartrail.scc |   17 ++++++
 4 files changed, 89 insertions(+), 0 deletions(-)
 create mode 100755 meta/cfg/kernel-cache/bsp/cedartrail/cedartrail-preempt-rt.scc
 create mode 100755 meta/cfg/kernel-cache/bsp/cedartrail/cedartrail-standard.scc
 create mode 100755 meta/cfg/kernel-cache/bsp/cedartrail/cedartrail.cfg
 create mode 100755 meta/cfg/kernel-cache/bsp/cedartrail/cedartrail.scc

new file mode 100755
index 0000000..1ab3629
@@ -0,0 +1,7 @@
+define KMACHINE cedartrail
+define KTYPE preempt-rt
+define KARCH i386
+
+# no new branch required, re-use the ktypes/preempt-rt branch
+include ktypes/preempt-rt
+include cedartrail.scc

new file mode 100755
index 0000000..28948f2
@@ -0,0 +1,7 @@
+define KMACHINE cedartrail
+define KTYPE standard
+define KARCH i386
+
+scc_leaf ktypes/standard cedartrail
+
+include cedartrail.scc

new file mode 100755
index 0000000..45aafed
@@ -0,0 +1,17 @@
+kconf hardware cedartrail.cfg
+
+
+include features/hpet/hpet.scc
+include features/intel-e1xxxx/intel-e100.scc
+include features/intel-e1xxxx/intel-e1xxxx.scc
+include features/dmaengine/dmaengine.scc
+include features/serial/8250.scc
+include features/framebuffer/vesafb.scc
+include cfg/usb-mass-storage.scc
+include cfg/boot-live.scc
+
+include features/logbuf/size-normal.scc
+
+include features/latencytop/latencytop.scc
+include features/profiling/profiling.scc
+

1.7.0.4

I made a mistake in specifying the machine branch name:

The new machine branch should be:

"yocto/standard/cedartrail"

instead of

"yocto/standard/cedartview"

Sorry about that.

Thanks
Rahul

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of [email protected]
Sent: Wednesday, December 14, 2011 9:28 AM
To: [email protected]; [email protected]
Subject: [yocto] [PATCH 0/1][KERNEL] meta: Add cedartrail

From: Rahul Saxena <[email protected]>

This is the initial version of a BSP for the Cedar Trail platform. The Cedar Trail platform consists of the Intel Cedarview Atom processor and Tiger Point Chipset. I have succesfully booted Sato image on Cedar Trail CRB, desktop and mobile pre-production sample boards and tested features such as wired networking, VESA graphics, SATA, USB ports

Please pull into linux-yocto-3.0/meta and linux-yocto-dev/meta

Also, please create a new "yocto/standard/cedarview" machine branch in each of the above, based on yocto/standard/base.

Thanks
Rahul

Signed=off-by: Rahul Saxena <[email protected]>
---

The following changes since commit caa74f86f42f6ecc22c3e9f380176b2695579e18:
Darren Hart (1):
Add EFI scc and cfg files

are available in the git repository at:

git://git.yoctoproject.org/linux-yocto-2.6.37-contrib rsaxena/meta-cedartrail
http://git.yoctoproject.org/cgit.cgi/linux-yocto-2.6.37-contrib/log/?h=rsaxena/meta-cedartrail

Rahul Saxena (1):
meta: Add cedartrail Signed-off-by: Rahul Saxena
<[email protected]>

 .../bsp/cedartrail/cedartrail-preempt-rt.scc       |    7 +++
 .../bsp/cedartrail/cedartrail-standard.scc         |    7 +++
 .../cfg/kernel-cache/bsp/cedartrail/cedartrail.cfg |   58 ++++++++++++++++++++
 .../cfg/kernel-cache/bsp/cedartrail/cedartrail.scc |   17 ++++++
 4 files changed, 89 insertions(+), 0 deletions(-)
 create mode 100755 meta/cfg/kernel-cache/bsp/cedartrail/cedartrail-preempt-rt.scc
 create mode 100755 meta/cfg/kernel-cache/bsp/cedartrail/cedartrail-standard.scc
 create mode 100755 meta/cfg/kernel-cache/bsp/cedartrail/cedartrail.cfg
 create mode 100755 meta/cfg/kernel-cache/bsp/cedartrail/cedartrail.scc

_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

No problem at all. I read the right thing even if you didn't type it :)

This looks fine to me, I'll queue it up ASAP.

Bruce