bug report: irq 19: nobody cared (try booting with the "irqpoll" option)
Hello list,
this is happening every time I reboot from suspend on a Clevo P150HM machine. It has been occuring for a while, but this report is for Fedora kernel 3.1.5-2.fc16 (I am running an up-to-date Fedora 16 x86_64 here). Smolt profile is available here:
http://www.smolts.org/client/show/pub_1eec606f-137a-46a1-922f-98f40180efa6
I have the problem itself does not seem to manifest in anything else except abrt complaining. The trace:
irq 19: nobody cared (try booting with the "irqpoll" option)
Pid: 0, comm: swapper Not tainted 3.1.5-2.fc16.x86_64 #1
Call Trace: <IRQ> [<ffffffff810dc87d>] __report_bad_irq+0x3d/0xe0 [<ffffffff810dcb3d>] note_interrupt+0x16d/0x220 [<ffffffff8101a4f3>] ? native_sched_clock+0x13/0x80 [<ffffffff810da8f9>] handle_irq_event_percpu+0xa9/0x220 [<ffffffff810daab4>] handle_irq_event+0x44/0x70 [<ffffffff810dd49f>] handle_fasteoi_irq+0x5f/0xf0 [<ffffffff810151e9>] handle_irq+0x49/0xa0 [<ffffffff815db6da>] do_IRQ+0x5a/0xe0 [<ffffffff815d116e>] common_interrupt+0x6e/0x6e <EOI> [<ffffffff8130179b>] ? intel_idle+0xcb/0x120 [<ffffffff8130177d>] ? intel_idle+0xad/0x120 [<ffffffff814803c6>] cpuidle_idle_call+0xc6/0x280 [<ffffffff81012225>] cpu_idle+0xc5/0x120 [<ffffffff815ab0ee>] rest_init+0x72/0x74 [<ffffffff81b7ec0a>] start_kernel+0x3b5/0x3c0 [<ffffffff81b7e347>] x86_64_start_reservations+0x132/0x136 [<ffffffff81b7e140>] ? early_idt_handlers+0x140/0x140 [<ffffffff81b7e44d>] x86_64_start_kernel+0x102/0x111
I am attaching the relevant part of /var/log/messages, please let me know if other information is needed. Thank you for your help in advance.
Regards,
Julian
P.S.
Please keep me CCed, I am not subscribed.
W dniu 15.12.2011 15:30, Julian Sikorski pisze:
Quoted 34 lines
Hello list,
this is happening every time I reboot from suspend on a Clevo P150HM machine. It has been occuring for a while, but this report is for Fedora kernel 3.1.5-2.fc16 (I am running an up-to-date Fedora 16
x86_64here). Smolt profile is available here:http://www.smolts.org/client/show/pub_1eec606f-137a-46a1-922f-98f40180efa6
I have the problem itself does not seem to manifest in anything else except abrt complaining. The trace:
irq 19: nobody cared (try booting with the "irqpoll" option)
Pid: 0, comm: swapper Not tainted 3.1.5-2.fc16.x86_64 #1Call Trace: <IRQ> [<ffffffff810dc87d>] __report_bad_irq+0x3d/0xe0 [<ffffffff810dcb3d>] note_interrupt+0x16d/0x220 [<ffffffff8101a4f3>] ? native_sched_clock+0x13/0x80 [<ffffffff810da8f9>] handle_irq_event_percpu+0xa9/0x220 [<ffffffff810daab4>] handle_irq_event+0x44/0x70 [<ffffffff810dd49f>] handle_fasteoi_irq+0x5f/0xf0 [<ffffffff810151e9>] handle_irq+0x49/0xa0 [<ffffffff815db6da>] do_IRQ+0x5a/0xe0 [<ffffffff815d116e>] common_interrupt+0x6e/0x6e <EOI> [<ffffffff8130179b>] ? intel_idle+0xcb/0x120 [<ffffffff8130177d>] ? intel_idle+0xad/0x120 [<ffffffff814803c6>] cpuidle_idle_call+0xc6/0x280 [<ffffffff81012225>] cpu_idle+0xc5/0x120 [<ffffffff815ab0ee>] rest_init+0x72/0x74 [<ffffffff81b7ec0a>] start_kernel+0x3b5/0x3c0 [<ffffffff81b7e347>] x86_64_start_reservations+0x132/0x136 [<ffffffff81b7e140>] ? early_idt_handlers+0x140/0x140 [<ffffffff81b7e44d>] x86_64_start_kernel+0x102/0x111
Quoted 8 lines
I am attaching the relevant part of
/var/log/messages, please let me know if other information is needed. Thank you for your help in advance.Regards,
Julian
P.S.
Please keep me CCed, I am not subscribed.
I was told that some other files might be useful. Please find attached the output of lspci -vvv and of /proc/interrupts
Julian
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
Subsystem: CLEVO/KAPOK Computer Device 5102
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f4000000-f60fffff
Prefetchable memory behind bridge: 00000000e8000000-00000000f3ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: CLEVO/KAPOK Computer Device 5102
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f650a000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:1a.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) (prog-if 20 [EHCI])
Subsystem: CLEVO/KAPOK Computer Device 5102
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f6508000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
Subsystem: CLEVO/KAPOK Computer Device 5102
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 52
Region 0: Memory at f6500000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f6400000-f64fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f6300000-f63fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f6200000-f62fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f6100000-f61fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) (prog-if 20 [EHCI])
Subsystem: CLEVO/KAPOK Computer Device 5102
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f6507000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05)
Subsystem: CLEVO/KAPOK Computer Device 5102
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: CLEVO/KAPOK Computer Device 5102 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 42 Region 0: I/O ports at f070 [size=8] Region 1: I/O ports at f060 [size=4] Region 2: I/O ports at f050 [size=8] Region 3: I/O ports at f040 [size=4] Region 4: I/O ports at f020 [size=32] Region 5: Memory at f6506000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
Subsystem: CLEVO/KAPOK Computer Device 5102
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f6505000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f000 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
01:00.0 VGA compatible controller: nVidia Corporation Device 0e31 (rev a1) (prog-if 00 [VGA controller])
Subsystem: CLEVO/KAPOK Computer Device 5102
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=32M]
Region 1: Memory at e8000000 (64-bit, prefetchable) [size=128M]
Region 3: Memory at f0000000 (64-bit, prefetchable) [size=64M]
Region 5: I/O ports at e000 [size=128]
Expansion ROM at f6000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nouveau
Kernel modules: nouveau, nvidiafb
01:00.1 Audio device: nVidia Corporation GF104 High Definition Audio Controller (rev a1)
Subsystem: CLEVO/KAPOK Computer Device 5102
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f6080000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd-hda-intel
02:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30 [XHCI])
Subsystem: CLEVO/KAPOK Computer Device 5102
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f6400000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
03:00.0 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05)
Subsystem: CLEVO/KAPOK Computer Device 5102
Physical Slot: 1-1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 53
Region 0: Memory at f6320000 (32-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at d100 [size=128]
Region 3: I/O ports at d000 [size=256]
Region 4: Memory at f6310000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at f6300000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: jme
Kernel modules: jme
03:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 90)
Subsystem: CLEVO/KAPOK Computer Device 5102
Physical Slot: 1-1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 18
Region 0: Memory at f6326000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
Kernel modules: sdhci-pci
03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 90) (prog-if 01)
Subsystem: CLEVO/KAPOK Computer Device 5102
Physical Slot: 1-1
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 18
Region 0: Memory at f6325000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel modules: sdhci-pci
03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 90)
Subsystem: CLEVO/KAPOK Computer Device 5102
Physical Slot: 1-1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 18
Region 0: Memory at f6324000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: jmb38x_ms
Kernel modules: jmb38x_ms
04:00.0 Network controller: Intel Corporation Centrino Advanced-N 6230 (rev 34)
Subsystem: Intel Corporation Centrino Advanced-N 6230 AGN
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 51
Region 0: Memory at f6200000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlagn
Kernel modules: iwlagn
05:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller (prog-if 10 [OHCI])
Subsystem: CLEVO/KAPOK Computer Device 5102
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f6103000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at f6102000 (32-bit, non-prefetchable) [size=128]
Region 4: Memory at f6101000 (32-bit, non-prefetchable) [size=128]
Region 5: Memory at f6100000 (32-bit, non-prefetchable) [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci
CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7
0: 129 0 0 0 0 0 0 0 IR-IO-APIC-edge timer 1: 3920 0 0 0 0 0 0 0 IR-IO-APIC-edge i8042 8: 1 0 0 0 0 0 0 0 IR-IO-APIC-edge rtc0 9: 1852 0 0 0 0 0 0 0 IR-IO-APIC-fasteoi acpi 12: 34409 0 0 0 0 0 0 0 IR-IO-APIC-edge i8042 16: 31732 1442 5482 3558 0 0 0 0 IR-IO-APIC-fasteoi ehci_hcd:usb1, nouveau 17: 152 0 40 0 0 0 0 0 IR-IO-APIC-fasteoi snd_hda_intel 18: 0 0 0 0 0 0 0 0 IR-IO-APIC-fasteoi jmb38x_ms:slot0, mmc0 19: 100008 0 0 0 0 0 0 0 IR-IO-APIC-fasteoi firewire_ohci 23: 141 29 0 0 0 0 0 0 IR-IO-APIC-fasteoi ehci_hcd:usb2 40: 0 0 0 0 0 0 0 0 DMAR_MSI-edge dmar0 42: 23619 8738 14883 9851 0 0 0 0 IR-PCI-MSI-edge ahci 43: 1 0 0 0 0 0 0 0 IR-PCI-MSI-edge xhci_hcd 44: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge xhci_hcd 45: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge xhci_hcd 46: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge xhci_hcd 47: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge xhci_hcd 48: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge xhci_hcd 49: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge xhci_hcd 50: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge xhci_hcd 51: 181759 0 0 0 0 0 0 0 IR-PCI-MSI-edge iwlagn 52: 352 0 0 0 0 0 0 0 IR-PCI-MSI-edge snd_hda_intel 53: 2 0 0 0 0 0 0 0 IR-PCI-MSI-edge p1p1 NMI: 36 112 51 21 167 30 18 10 Non-maskable interrupts LOC: 745620 286150 151131 63431 569325 158704 93468 45004 Local timer interrupts SPU: 0 0 0 0 0 0 0 0 Spurious interrupts PMI: 36 112 51 21 167 30 18 10 Performance monitoring interrupts IWI: 0 0 0 0 0 0 0 0 IRQ work interrupts RES: 395806 190268 69817 35327 341386 63276 31648 23782 Rescheduling interrupts CAL: 2594 4557 6003 6884 3868 8841 10965 11701 Function call interrupts TLB: 2847 2513 1853 4537 1537 2086 1148 1154 TLB shootdowns TRM: 0 0 0 0 0 0 0 0 Thermal event interrupts THR: 0 0 0 0 0 0 0 0 Threshold APIC interrupts MCE: 0 0 0 0 0 0 0 0 Machine check exceptions MCP: 8 8 8 8 8 8 8 8 Machine check polls ERR: 0 MIS: 0
(CC linux1394-devel)
Quoted 10 lines · Julian Sikorski
W dniu 15.12.2011 15:30, Julian Sikorski pisze:
Quoted 9 lines
this is happening every time I reboot from suspend on a Clevo P150HM machine. It has been occuring for a while, but this report is for Fedora kernel 3.1.5-2.fc16 (I am running an up-to-date Fedora 16
x86_64here). Smolt profile is available here:http://www.smolts.org/client/show/pub_1eec606f-137a-46a1-922f-98f40180efa6
I have the problem itself does not seem to manifest in anything else except abrt complaining.
Your FireWire won't work.
Quoted 17 lines
Quoted 1 line
irq 19: nobody cared (try booting with the "irqpoll" option)
05:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller (prog-if 10 [OHCI])
Subsystem: CLEVO/KAPOK Computer Device 5102
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory atf6103000(32-bit, non-prefetchable) [size=2K]
Region 1: Memory atf6102000(32-bit, non-prefetchable) [size=128]
Region 4: Memory atf6101000(32-bit, non-prefetchable) [size=128]
Region 5: Memory atf6100000(32-bit, non-prefetchable) [size=128]
Capabilities: <access denied>
Kernel driver in use:firewire_ohci
Kernel modules: firewire-ohci
Quoted 7 lines
CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7
...18: 0 0 0 0 0 0 0 0 IR-IO-APIC-fasteoi jmb38x_ms:slot0, mmc0 19: 100008 0 0 0 0 0 0 0 IR-IO-APIC-fasteoi firewire_ohci...
40: 0 0 0 0 0 0 0 0 DMAR_MSI-edge dmar0
...
Was it the JMB38x that used a wrong interface number in its PCIe transactions, which would make the I/O-MMU map it to the wrong device?
Julian, try disabling DMAR (probably called IOMMU or something related to virtualization) in the BIOS.
Regards,
Clemens
W dniu 15.12.2011 16:56, Clemens Ladisch pisze:
Quoted 9 lines
(CC linux1394-devel)
Quoted 6 lines · Julian Sikorski
W dniu 15.12.2011 15:30, Julian Sikorski pisze:
Quoted 5 lines
this is happening every time I reboot from suspend on a Clevo P150HM machine. It has been occuring for a while, but this report is for Fedora kernel 3.1.5-2.fc16 (I am running an up-to-date Fedora 16
x86_64here). Smolt profile is available here:
Quoted 6 lines
Quoted 4 lines
Quoted 4 lines
http://www.smolts.org/client/show/pub_1eec606f-137a-46a1-922f-98f40180efa6
I have the problem itself does not seem to manifest in anything else except abrt complaining.
Your FireWire won't work.
Unfortunately I do not have any FW device around to test.
Quoted 26 lines
Quoted 18 lines
Quoted 2 lines
irq 19: nobody cared (try booting with the "irqpoll" option)
05:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller (prog-if 10 [OHCI])
Subsystem: CLEVO/KAPOK Computer Device 5102
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory atf6103000(32-bit, non-prefetchable) [size=2K]
Region 1: Memory atf6102000(32-bit, non-prefetchable) [size=128]
Region 4: Memory atf6101000(32-bit, non-prefetchable) [size=128]
Region 5: Memory atf6100000(32-bit, non-prefetchable) [size=128]
Capabilities: <access denied>
Kernel driver in use:firewire_ohci
Kernel modules: firewire-ohciQuoted 7 lines
CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7
...18: 0 0 0 0 0 0 0 0 IR-IO-APIC-fasteoi jmb38x_ms:slot0, mmc0 19: 100008 0 0 0 0 0 0 0 IR-IO-APIC-fasteoi firewire_ohci...
40: 0 0 0 0 0 0 0 0 DMAR_MSI-edge dmar0
...
Quoted 5 lines
Was it the JMB38x that used a wrong interface number in its PCIe transactions, which would make the I/O-MMU map it to the wrong device?
Julian, try disabling DMAR (probably called IOMMU or something related to virtualization) in the BIOS.
There is no such option or anything even remotely related in the BIOS (this machine uses the AMI Aptio if that matters).
Quoted 4 lines
Regards,
Clemens
Just to make it clear, booting with irqpoll option made the message go away.
Regards,
Julian
Quoted 5 lines · Julian Sikorski
W dniu 15.12.2011 16:56, Clemens Ladisch pisze:
Quoted 2 lines
Julian, try disabling DMAR (probably called IOMMU or something related to virtualization) in the BIOS.
There is no such option or anything even remotely related in the BIOS
Then add the kernel parameter intel_iommu=off to the boot loader.
Regards,
Clemens
W dniu 15.12.2011 18:49, Clemens Ladisch pisze:
Quoted 5 lines
Quoted 4 lines · Julian Sikorski
W dniu 15.12.2011 16:56, Clemens Ladisch pisze:
Quoted 2 lines
Julian, try disabling DMAR (probably called IOMMU or something related to virtualization) in the BIOS.
Quoted 7 lines
Quoted 1 line
There is no such option or anything even remotely related in the BIOS
Then add the kernel parameter intel_iommu=off to the boot loader.
Regards,
Clemens
This did not work (I have nvidia.ko loaded now, but as I have shown before the issue can be reproduced without it too):
$ dmesg | grep mmu [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.1.5-2.fc16.x86_64 root=/dev/mapper/vg_snowball2-lv_root ro rd.lvm.lv=vg_snowball2/lv_swap rd.md=0 rd.dm=0 quiet SYSFONT=latarcyrheb-sun16 rhgb rd.lvm.lv=vg_snowball2/lv_root rd.luks=0 LANG=pl_PL.UTF-8 KEYTABLE=pl2 nouveau.modeset=0 rd.driver.blacklist=nouveau intel_iommu=off [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.1.5-2.fc16.x86_64 root=/dev/mapper/vg_snowball2-lv_root ro rd.lvm.lv=vg_snowball2/lv_swap rd.md=0 rd.dm=0 quiet SYSFONT=latarcyrheb-sun16 rhgb rd.lvm.lv=vg_snowball2/lv_root rd.luks=0 LANG=pl_PL.UTF-8 KEYTABLE=pl2 nouveau.modeset=0 rd.driver.blacklist=nouveau intel_iommu=off
irq 19: nobody cared (try booting with the "irqpoll" option)
Pid: 0, comm: swapper Tainted: P 3.1.5-2.fc16.x86_64 #1
Call Trace: <IRQ> [<ffffffff810dc87d>] __report_bad_irq+0x3d/0xe0 [<ffffffff810dcb3d>] note_interrupt+0x16d/0x220 [<ffffffff8101a4f3>] ? native_sched_clock+0x13/0x80 [<ffffffff810da8f9>] handle_irq_event_percpu+0xa9/0x220 [<ffffffff810daab4>] handle_irq_event+0x44/0x70 [<ffffffff810dd49f>] handle_fasteoi_irq+0x5f/0xf0 [<ffffffff810151e9>] handle_irq+0x49/0xa0 [<ffffffff815db6da>] do_IRQ+0x5a/0xe0 [<ffffffff815d116e>] common_interrupt+0x6e/0x6e <EOI> [<ffffffff8130179b>] ? intel_idle+0xcb/0x120 [<ffffffff8130177d>] ? intel_idle+0xad/0x120 [<ffffffff814803c6>] cpuidle_idle_call+0xc6/0x280 [<ffffffff81012225>] cpu_idle+0xc5/0x120 [<ffffffff815ab0ee>] rest_init+0x72/0x74 [<ffffffff81b7ec0a>] start_kernel+0x3b5/0x3c0 [<ffffffff81b7e347>] x86_64_start_reservations+0x132/0x136 [<ffffffff81b7e140>] ? early_idt_handlers+0x140/0x140 [<ffffffff81b7e44d>] x86_64_start_kernel+0x102/0x111
Julian
Quoted 12 lines · Julian Sikorski
W dniu 15.12.2011 18:49, Clemens Ladisch pisze:
Quoted 4 lines
Was it the JMB38x that used a wrong interface number in its PCIe transactions, which would make the I/O-MMU map it to the wrong device? [...]
add the kernel parameter intel_iommu=off to the boot loader.This did not work
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Quoted 6 lines
...
03:00.0 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05) 03:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 90)
03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 90) (prog-if 01) 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 90)
05:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller (prog-if 10 [OHCI])
Sorry, I didn't notice before that your FireWire controller is a physically separate chip on another PCIe port, so whatever is happening is unlikely to be related with another device.
It appears that the JMB381 is not correctly reinitialized when doing a suspend/resume. However, the driver already does a reset of the chip, so it isn't clear what else could be done. This might be a problem with the PCI initialization as done by the BIOS; try a BIOS update, if possible.
Regards,
Clemens
W dniu 16.12.2011 09:37, Clemens Ladisch pisze:
Quoted 31 lines
Quoted 12 lines · Julian Sikorski
W dniu 15.12.2011 18:49, Clemens Ladisch pisze:
Quoted 4 lines
Was it the JMB38x that used a wrong interface number in its PCIe transactions, which would make the I/O-MMU map it to the wrong device? [...]
add the kernel parameter intel_iommu=off to the boot loader.This did not work
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0Quoted 6 lines
...
03:00.0 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05) 03:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 90)
03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 90) (prog-if 01) 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 90)
05:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller (prog-if 10 [OHCI])Sorry, I didn't notice before that your FireWire controller is a physically separate chip on another PCIe port, so whatever is happening is unlikely to be related with another device.
It appears that the JMB381 is not correctly reinitialized when doing a suspend/resume. However, the driver already does a reset of the chip, so it isn't clear what else could be done. This might be a problem with the PCI initialization as done by the BIOS; try a BIOS update, if possible.
Quoted 2 lines
Regards,
Clemens
I am already running the latest BIOS.
Is there a quirk list somewhere which would force irqpoll for certain machines/drivers?
Julian