Skip to contentSkip to conversation

bug report: irq 19: nobody cared (try booting with the "irqpoll" option)

DISCUSSION Julian Sikorski 2 participants 8 messages Dec 15, 2011 – Dec 16, 2011

lore
Share & tools
lore
#0 lore raw

Hello list,

this is happening every time I reboot from suspend on a Clevo P150HM machine. It has been occuring for a while, but this report is for Fedora kernel 3.1.5-2.fc16 (I am running an up-to-date Fedora 16 x86_64 here). Smolt profile is available here:

http://www.smolts.org/client/show/pub_1eec606f-137a-46a1-922f-98f40180efa6

I have the problem itself does not seem to manifest in anything else except abrt complaining. The trace:

irq 19: nobody cared (try booting with the "irqpoll" option)
Pid: 0, comm: swapper Not tainted 3.1.5-2.fc16.x86_64 #1

Call Trace:
 <IRQ>  [<ffffffff810dc87d>] __report_bad_irq+0x3d/0xe0
 [<ffffffff810dcb3d>] note_interrupt+0x16d/0x220
 [<ffffffff8101a4f3>] ? native_sched_clock+0x13/0x80
 [<ffffffff810da8f9>] handle_irq_event_percpu+0xa9/0x220
 [<ffffffff810daab4>] handle_irq_event+0x44/0x70
 [<ffffffff810dd49f>] handle_fasteoi_irq+0x5f/0xf0
 [<ffffffff810151e9>] handle_irq+0x49/0xa0
 [<ffffffff815db6da>] do_IRQ+0x5a/0xe0
 [<ffffffff815d116e>] common_interrupt+0x6e/0x6e
 <EOI>  [<ffffffff8130179b>] ? intel_idle+0xcb/0x120
 [<ffffffff8130177d>] ? intel_idle+0xad/0x120
 [<ffffffff814803c6>] cpuidle_idle_call+0xc6/0x280
 [<ffffffff81012225>] cpu_idle+0xc5/0x120
 [<ffffffff815ab0ee>] rest_init+0x72/0x74
 [<ffffffff81b7ec0a>] start_kernel+0x3b5/0x3c0
 [<ffffffff81b7e347>] x86_64_start_reservations+0x132/0x136
 [<ffffffff81b7e140>] ? early_idt_handlers+0x140/0x140
 [<ffffffff81b7e44d>] x86_64_start_kernel+0x102/0x111

I am attaching the relevant part of /var/log/messages, please let me know if other information is needed. Thank you for your help in advance.

Regards,
Julian

P.S.
Please keep me CCed, I am not subscribed.

#1 lore raw

W dniu 15.12.2011 15:30, Julian Sikorski pisze:

Quoted 34 lines

Hello list,

this is happening every time I reboot from suspend on a Clevo P150HM machine. It has been occuring for a while, but this report is for Fedora kernel 3.1.5-2.fc16 (I am running an up-to-date Fedora 16 x86_64 here). Smolt profile is available here:

http://www.smolts.org/client/show/pub_1eec606f-137a-46a1-922f-98f40180efa6

I have the problem itself does not seem to manifest in anything else except abrt complaining. The trace:

irq 19: nobody cared (try booting with the "irqpoll" option)
Pid: 0, comm: swapper Not tainted 3.1.5-2.fc16.x86_64 #1

Call Trace:
 <IRQ>  [<ffffffff810dc87d>] __report_bad_irq+0x3d/0xe0
 [<ffffffff810dcb3d>] note_interrupt+0x16d/0x220
 [<ffffffff8101a4f3>] ? native_sched_clock+0x13/0x80
 [<ffffffff810da8f9>] handle_irq_event_percpu+0xa9/0x220
 [<ffffffff810daab4>] handle_irq_event+0x44/0x70
 [<ffffffff810dd49f>] handle_fasteoi_irq+0x5f/0xf0
 [<ffffffff810151e9>] handle_irq+0x49/0xa0
 [<ffffffff815db6da>] do_IRQ+0x5a/0xe0
 [<ffffffff815d116e>] common_interrupt+0x6e/0x6e
 <EOI>  [<ffffffff8130179b>] ? intel_idle+0xcb/0x120
 [<ffffffff8130177d>] ? intel_idle+0xad/0x120
 [<ffffffff814803c6>] cpuidle_idle_call+0xc6/0x280
 [<ffffffff81012225>] cpu_idle+0xc5/0x120
 [<ffffffff815ab0ee>] rest_init+0x72/0x74
 [<ffffffff81b7ec0a>] start_kernel+0x3b5/0x3c0
 [<ffffffff81b7e347>] x86_64_start_reservations+0x132/0x136
 [<ffffffff81b7e140>] ? early_idt_handlers+0x140/0x140
 [<ffffffff81b7e44d>] x86_64_start_kernel+0x102/0x111
Quoted 8 lines

I am attaching the relevant part of /var/log/messages, please let me know if other information is needed. Thank you for your help in advance.

Regards,
Julian

P.S.
Please keep me CCed, I am not subscribed.

I was told that some other files might be useful. Please find attached the output of lspci -vvv and of /proc/interrupts

Julian

00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
Subsystem: CLEVO/KAPOK Computer Device 5102
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>

00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f4000000-f60fffff
Prefetchable memory behind bridge: 00000000e8000000-00000000f3ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: CLEVO/KAPOK Computer Device 5102
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f650a000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>

00:1a.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) (prog-if 20 [EHCI])
Subsystem: CLEVO/KAPOK Computer Device 5102
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f6508000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
Subsystem: CLEVO/KAPOK Computer Device 5102
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 52
Region 0: Memory at f6500000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd-hda-intel

00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f6400000-f64fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f6300000-f63fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f6200000-f62fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f6100000-f61fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1d.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) (prog-if 20 [EHCI])
Subsystem: CLEVO/KAPOK Computer Device 5102
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f6507000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05)
Subsystem: CLEVO/KAPOK Computer Device 5102
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt

00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) (prog-if 01 [AHCI 1.0])

	Subsystem: CLEVO/KAPOK Computer Device 5102
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 42
	Region 0: I/O ports at f070 [size=8]
	Region 1: I/O ports at f060 [size=4]
	Region 2: I/O ports at f050 [size=8]
	Region 3: I/O ports at f040 [size=4]
	Region 4: I/O ports at f020 [size=32]
	Region 5: Memory at f6506000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
Subsystem: CLEVO/KAPOK Computer Device 5102
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f6505000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f000 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801

01:00.0 VGA compatible controller: nVidia Corporation Device 0e31 (rev a1) (prog-if 00 [VGA controller])
Subsystem: CLEVO/KAPOK Computer Device 5102
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=32M]
Region 1: Memory at e8000000 (64-bit, prefetchable) [size=128M]
Region 3: Memory at f0000000 (64-bit, prefetchable) [size=64M]
Region 5: I/O ports at e000 [size=128]
Expansion ROM at f6000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nouveau
Kernel modules: nouveau, nvidiafb

01:00.1 Audio device: nVidia Corporation GF104 High Definition Audio Controller (rev a1)
Subsystem: CLEVO/KAPOK Computer Device 5102
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f6080000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd-hda-intel

02:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30 [XHCI])
Subsystem: CLEVO/KAPOK Computer Device 5102
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f6400000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd

03:00.0 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05)
Subsystem: CLEVO/KAPOK Computer Device 5102
Physical Slot: 1-1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 53
Region 0: Memory at f6320000 (32-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at d100 [size=128]
Region 3: I/O ports at d000 [size=256]
Region 4: Memory at f6310000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at f6300000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: jme
Kernel modules: jme

03:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 90)
Subsystem: CLEVO/KAPOK Computer Device 5102
Physical Slot: 1-1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 18
Region 0: Memory at f6326000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
Kernel modules: sdhci-pci

03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 90) (prog-if 01)
Subsystem: CLEVO/KAPOK Computer Device 5102
Physical Slot: 1-1
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 18
Region 0: Memory at f6325000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel modules: sdhci-pci

03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 90)
Subsystem: CLEVO/KAPOK Computer Device 5102
Physical Slot: 1-1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 18
Region 0: Memory at f6324000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: jmb38x_ms
Kernel modules: jmb38x_ms

04:00.0 Network controller: Intel Corporation Centrino Advanced-N 6230 (rev 34)
Subsystem: Intel Corporation Centrino Advanced-N 6230 AGN
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 51
Region 0: Memory at f6200000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlagn
Kernel modules: iwlagn

05:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller (prog-if 10 [OHCI])
Subsystem: CLEVO/KAPOK Computer Device 5102
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f6103000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at f6102000 (32-bit, non-prefetchable) [size=128]
Region 4: Memory at f6101000 (32-bit, non-prefetchable) [size=128]
Region 5: Memory at f6100000 (32-bit, non-prefetchable) [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci

CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7

  0:        129          0          0          0          0          0          0          0  IR-IO-APIC-edge      timer
  1:       3920          0          0          0          0          0          0          0  IR-IO-APIC-edge      i8042
  8:          1          0          0          0          0          0          0          0  IR-IO-APIC-edge      rtc0
  9:       1852          0          0          0          0          0          0          0  IR-IO-APIC-fasteoi   acpi
 12:      34409          0          0          0          0          0          0          0  IR-IO-APIC-edge      i8042
 16:      31732       1442       5482       3558          0          0          0          0  IR-IO-APIC-fasteoi   ehci_hcd:usb1, nouveau
 17:        152          0         40          0          0          0          0          0  IR-IO-APIC-fasteoi   snd_hda_intel
 18:          0          0          0          0          0          0          0          0  IR-IO-APIC-fasteoi   jmb38x_ms:slot0, mmc0
 19:     100008          0          0          0          0          0          0          0  IR-IO-APIC-fasteoi   firewire_ohci
 23:        141         29          0          0          0          0          0          0  IR-IO-APIC-fasteoi   ehci_hcd:usb2
 40:          0          0          0          0          0          0          0          0  DMAR_MSI-edge      dmar0
 42:      23619       8738      14883       9851          0          0          0          0  IR-PCI-MSI-edge      ahci
 43:          1          0          0          0          0          0          0          0  IR-PCI-MSI-edge      xhci_hcd
 44:          0          0          0          0          0          0          0          0  IR-PCI-MSI-edge      xhci_hcd
 45:          0          0          0          0          0          0          0          0  IR-PCI-MSI-edge      xhci_hcd
 46:          0          0          0          0          0          0          0          0  IR-PCI-MSI-edge      xhci_hcd
 47:          0          0          0          0          0          0          0          0  IR-PCI-MSI-edge      xhci_hcd
 48:          0          0          0          0          0          0          0          0  IR-PCI-MSI-edge      xhci_hcd
 49:          0          0          0          0          0          0          0          0  IR-PCI-MSI-edge      xhci_hcd
 50:          0          0          0          0          0          0          0          0  IR-PCI-MSI-edge      xhci_hcd
 51:     181759          0          0          0          0          0          0          0  IR-PCI-MSI-edge      iwlagn
 52:        352          0          0          0          0          0          0          0  IR-PCI-MSI-edge      snd_hda_intel
 53:          2          0          0          0          0          0          0          0  IR-PCI-MSI-edge      p1p1
NMI:         36        112         51         21        167         30         18         10   Non-maskable interrupts
LOC:     745620     286150     151131      63431     569325     158704      93468      45004   Local timer interrupts
SPU:          0          0          0          0          0          0          0          0   Spurious interrupts
PMI:         36        112         51         21        167         30         18         10   Performance monitoring interrupts
IWI:          0          0          0          0          0          0          0          0   IRQ work interrupts
RES:     395806     190268      69817      35327     341386      63276      31648      23782   Rescheduling interrupts
CAL:       2594       4557       6003       6884       3868       8841      10965      11701   Function call interrupts
TLB:       2847       2513       1853       4537       1537       2086       1148       1154   TLB shootdowns
TRM:          0          0          0          0          0          0          0          0   Thermal event interrupts
THR:          0          0          0          0          0          0          0          0   Threshold APIC interrupts
MCE:          0          0          0          0          0          0          0          0   Machine check exceptions
MCP:          8          8          8          8          8          8          8          8   Machine check polls
ERR:          0
MIS:          0
#3 lore raw
In reply to Clemens Ladisch

W dniu 15.12.2011 16:56, Clemens Ladisch pisze:

Quoted 9 lines

(CC linux1394-devel)

Quoted 6 lines · Julian Sikorski

W dniu 15.12.2011 15:30, Julian Sikorski pisze:

Quoted 5 lines

this is happening every time I reboot from suspend on a Clevo P150HM machine. It has been occuring for a while, but this report is for Fedora kernel 3.1.5-2.fc16 (I am running an up-to-date Fedora 16 x86_64 here). Smolt profile is available here:

Quoted 6 lines
Quoted 4 lines
Quoted 4 lines

http://www.smolts.org/client/show/pub_1eec606f-137a-46a1-922f-98f40180efa6

I have the problem itself does not seem to manifest in anything else except abrt complaining.

Your FireWire won't work.

Unfortunately I do not have any FW device around to test.

Quoted 26 lines
Quoted 18 lines
Quoted 2 lines

irq 19: nobody cared (try booting with the "irqpoll" option)

05:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller (prog-if 10 [OHCI])
Subsystem: CLEVO/KAPOK Computer Device 5102
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f6103000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at f6102000 (32-bit, non-prefetchable) [size=128]
Region 4: Memory at f6101000 (32-bit, non-prefetchable) [size=128]
Region 5: Memory at f6100000 (32-bit, non-prefetchable) [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci

Quoted 7 lines

CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7
...

 18:          0          0          0          0          0          0          0          0  IR-IO-APIC-fasteoi   jmb38x_ms:slot0, mmc0
 19:     100008          0          0          0          0          0          0          0  IR-IO-APIC-fasteoi   firewire_ohci

...
40: 0 0 0 0 0 0 0 0 DMAR_MSI-edge dmar0
...

Quoted 5 lines

Was it the JMB38x that used a wrong interface number in its PCIe transactions, which would make the I/O-MMU map it to the wrong device?

Julian, try disabling DMAR (probably called IOMMU or something related to virtualization) in the BIOS.

There is no such option or anything even remotely related in the BIOS (this machine uses the AMI Aptio if that matters).

Quoted 4 lines

Regards,
Clemens

Just to make it clear, booting with irqpoll option made the message go away.

Regards,
Julian

#2 lore raw
In reply to Julian Sikorski

(CC linux1394-devel)

Quoted 10 lines · Julian Sikorski

W dniu 15.12.2011 15:30, Julian Sikorski pisze:

Quoted 9 lines

this is happening every time I reboot from suspend on a Clevo P150HM machine. It has been occuring for a while, but this report is for Fedora kernel 3.1.5-2.fc16 (I am running an up-to-date Fedora 16 x86_64 here). Smolt profile is available here:

http://www.smolts.org/client/show/pub_1eec606f-137a-46a1-922f-98f40180efa6

I have the problem itself does not seem to manifest in anything else except abrt complaining.

Your FireWire won't work.

Quoted 17 lines
Quoted 1 line

irq 19: nobody cared (try booting with the "irqpoll" option)

05:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller (prog-if 10 [OHCI])
Subsystem: CLEVO/KAPOK Computer Device 5102
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f6103000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at f6102000 (32-bit, non-prefetchable) [size=128]
Region 4: Memory at f6101000 (32-bit, non-prefetchable) [size=128]
Region 5: Memory at f6100000 (32-bit, non-prefetchable) [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci

Quoted 7 lines

CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7
...

 18:          0          0          0          0          0          0          0          0  IR-IO-APIC-fasteoi   jmb38x_ms:slot0, mmc0
 19:     100008          0          0          0          0          0          0          0  IR-IO-APIC-fasteoi   firewire_ohci

...
40: 0 0 0 0 0 0 0 0 DMAR_MSI-edge dmar0
...

Was it the JMB38x that used a wrong interface number in its PCIe transactions, which would make the I/O-MMU map it to the wrong device?

Julian, try disabling DMAR (probably called IOMMU or something related to virtualization) in the BIOS.

Regards,
Clemens

#4 lore raw
In reply to Julian Sikorski
Quoted 5 lines · Julian Sikorski

W dniu 15.12.2011 16:56, Clemens Ladisch pisze:

Quoted 2 lines

Julian, try disabling DMAR (probably called IOMMU or something related to virtualization) in the BIOS.

There is no such option or anything even remotely related in the BIOS

Then add the kernel parameter intel_iommu=off to the boot loader.

Regards,
Clemens

#5 lore raw

W dniu 15.12.2011 18:49, Clemens Ladisch pisze:

Quoted 5 lines
Quoted 4 lines · Julian Sikorski

W dniu 15.12.2011 16:56, Clemens Ladisch pisze:

Quoted 2 lines

Julian, try disabling DMAR (probably called IOMMU or something related to virtualization) in the BIOS.

Quoted 7 lines
Quoted 1 line

There is no such option or anything even remotely related in the BIOS

Then add the kernel parameter intel_iommu=off to the boot loader.

Regards,
Clemens

This did not work (I have nvidia.ko loaded now, but as I have shown before the issue can be reproduced without it too):

$ dmesg | grep mmu
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.1.5-2.fc16.x86_64
root=/dev/mapper/vg_snowball2-lv_root ro rd.lvm.lv=vg_snowball2/lv_swap
rd.md=0 rd.dm=0 quiet SYSFONT=latarcyrheb-sun16 rhgb
rd.lvm.lv=vg_snowball2/lv_root rd.luks=0 LANG=pl_PL.UTF-8 KEYTABLE=pl2
nouveau.modeset=0 rd.driver.blacklist=nouveau intel_iommu=off
[    0.000000] Kernel command line:
BOOT_IMAGE=/vmlinuz-3.1.5-2.fc16.x86_64
root=/dev/mapper/vg_snowball2-lv_root ro rd.lvm.lv=vg_snowball2/lv_swap
rd.md=0 rd.dm=0 quiet SYSFONT=latarcyrheb-sun16 rhgb
rd.lvm.lv=vg_snowball2/lv_root rd.luks=0 LANG=pl_PL.UTF-8 KEYTABLE=pl2
nouveau.modeset=0 rd.driver.blacklist=nouveau intel_iommu=off

irq 19: nobody cared (try booting with the "irqpoll" option)
Pid: 0, comm: swapper Tainted: P 3.1.5-2.fc16.x86_64 #1

Call Trace:
 <IRQ>  [<ffffffff810dc87d>] __report_bad_irq+0x3d/0xe0
 [<ffffffff810dcb3d>] note_interrupt+0x16d/0x220
 [<ffffffff8101a4f3>] ? native_sched_clock+0x13/0x80
 [<ffffffff810da8f9>] handle_irq_event_percpu+0xa9/0x220
 [<ffffffff810daab4>] handle_irq_event+0x44/0x70
 [<ffffffff810dd49f>] handle_fasteoi_irq+0x5f/0xf0
 [<ffffffff810151e9>] handle_irq+0x49/0xa0
 [<ffffffff815db6da>] do_IRQ+0x5a/0xe0
 [<ffffffff815d116e>] common_interrupt+0x6e/0x6e
 <EOI>  [<ffffffff8130179b>] ? intel_idle+0xcb/0x120
 [<ffffffff8130177d>] ? intel_idle+0xad/0x120
 [<ffffffff814803c6>] cpuidle_idle_call+0xc6/0x280
 [<ffffffff81012225>] cpu_idle+0xc5/0x120
 [<ffffffff815ab0ee>] rest_init+0x72/0x74
 [<ffffffff81b7ec0a>] start_kernel+0x3b5/0x3c0
 [<ffffffff81b7e347>] x86_64_start_reservations+0x132/0x136
 [<ffffffff81b7e140>] ? early_idt_handlers+0x140/0x140
 [<ffffffff81b7e44d>] x86_64_start_kernel+0x102/0x111

Julian

#6 lore raw
Quoted 12 lines · Julian Sikorski

W dniu 15.12.2011 18:49, Clemens Ladisch pisze:

Quoted 4 lines

Was it the JMB38x that used a wrong interface number in its PCIe transactions, which would make the I/O-MMU map it to the wrong device? [...]
add the kernel parameter intel_iommu=off to the boot loader.

This did not work

00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2

        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4
        Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Quoted 6 lines

...
03:00.0 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05) 03:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 90)
03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 90) (prog-if 01) 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 90)
05:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller (prog-if 10 [OHCI])

Sorry, I didn't notice before that your FireWire controller is a physically separate chip on another PCIe port, so whatever is happening is unlikely to be related with another device.

It appears that the JMB381 is not correctly reinitialized when doing a suspend/resume. However, the driver already does a reset of the chip, so it isn't clear what else could be done. This might be a problem with the PCI initialization as done by the BIOS; try a BIOS update, if possible.

Regards,
Clemens

#7 lore raw

W dniu 16.12.2011 09:37, Clemens Ladisch pisze:

Quoted 31 lines
Quoted 12 lines · Julian Sikorski

W dniu 15.12.2011 18:49, Clemens Ladisch pisze:

Quoted 4 lines

Was it the JMB38x that used a wrong interface number in its PCIe transactions, which would make the I/O-MMU map it to the wrong device? [...]
add the kernel parameter intel_iommu=off to the boot loader.

This did not work

00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2

        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4
        Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Quoted 6 lines

...
03:00.0 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05) 03:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 90)
03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 90) (prog-if 01) 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 90)
05:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller (prog-if 10 [OHCI])

Sorry, I didn't notice before that your FireWire controller is a physically separate chip on another PCIe port, so whatever is happening is unlikely to be related with another device.

It appears that the JMB381 is not correctly reinitialized when doing a suspend/resume. However, the driver already does a reset of the chip, so it isn't clear what else could be done. This might be a problem with the PCI initialization as done by the BIOS; try a BIOS update, if possible.

Quoted 2 lines

Regards,
Clemens

I am already running the latest BIOS.
Is there a quirk list somewhere which would force irqpoll for certain machines/drivers?

Julian