peci: aspeed: Add AST2600 compatible
Subsystems (3)
cover peci: aspeed: Add AST2600 compatible
Update the Aspeed PECI driver with the AST2600 compatible string. A new comptabile string is needed for the extended HW feature of AST2600.
Chia-Wei, Wang (2):
peci: aspeed: Add AST2600 compatible string
dt-bindings: peci: aspeed: Add AST2600 compatible
Documentation/devicetree/bindings/peci/peci-aspeed.txt | 1 + drivers/peci/peci-aspeed.c | 1 + 2 files changed, 2 insertions(+)
Signature · 1 line
2.17.1
PATCH 1/2 peci: aspeed: Add AST2600 compatible string
The AST2600 SoC contains the same register set as AST25xx.
--- drivers/peci/peci-aspeed.c | 1 + 1 file changed, 1 insertion(+)
drivers/peci/peci-aspeed.c +1 -0
@@ -485,6 +485,7 @@ static int aspeed_peci_remove(struct platform_device *pdev)static const struct of_device_id aspeed_peci_of_table[] = { { .compatible ="aspeed,ast2400-peci" , }, { .compatible ="aspeed,ast2500-peci" , }, + { .compatible ="aspeed,ast2600-peci" , }, { } };MODULE_DEVICE_TABLE (of, aspeed_peci_of_table);
Signature · 1 line
2.17.1
PATCH 2/2 dt-bindings: peci: aspeed: Add AST2600 compatible
In reply to Chia-Wei, WangDocument the AST2600 PECI controller compatible string.
--- Documentation/devicetree/bindings/peci/peci-aspeed.txt | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/peci/peci-aspeed.txt +1 -0
@@ -4,6 +4,7 @@ Required properties: - compatible : Should be one of: "aspeed,ast2400-peci" "aspeed,ast2500-peci" + "aspeed,ast2600-peci" - reg : Should contain PECI controller registers location and length. - #address-cells : Should be <1> required to define a client address.
Signature · 1 line
2.17.1
Re: [PATCH 2/2] dt-bindings: peci: aspeed: Add AST2600 compatible
Quoted 7 lines · Wang
Document the AST2600 PECI controller compatible string.
Signed-off-by Chia-Wei, Wang <[email protected]>--- Documentation/devicetree/bindings/peci/peci-aspeed.txt | 1 + 1 file changed, 1 insertion(+)
Hi Chia-Wei,
Quoted 4 lines · Wang
Update the Aspeed PECI driver with the AST2600 compatible string. A new comptabile string is needed for the extended HW feature of AST2600.
Quoted 8 lines
Chia-Wei, Wang (2):
peci: aspeed: Add AST2600 compatible string
dt-bindings: peci: aspeed: Add AST2600 compatibleDocumentation/devicetree/bindings/peci/peci-aspeed.txt | 1 + drivers/peci/peci-aspeed.c | 1 + 2 files changed, 2 insertions(+)
PECI subsystem isn't in linux upstream yet so you should submit it into OpenBMC dev-5.3 tree only.
Cheers,
Jae
Joel Stanley
maintainerQuoted 12 lines · Jae Hyun Yoo
Hi Chia-Wei,
Quoted 8 lines · Wang
Update the Aspeed PECI driver with the AST2600 compatible string. A new comptabile string is needed for the extended HW feature of AST2600.
Chia-Wei, Wang (2):
peci: aspeed: Add AST2600 compatible string
dt-bindings: peci: aspeed: Add AST2600 compatible
Quoted 7 lines
Quoted 4 lines
Documentation/devicetree/bindings/peci/peci-aspeed.txt | 1 + drivers/peci/peci-aspeed.c | 1 + 2 files changed, 2 insertions(+)PECI subsystem isn't in linux upstream yet so you should submit it into OpenBMC dev-5.3 tree only.
OpenBMC has been carrying the out of tree patches for some time now. I haven't seen a new version posted for a while. Do you have a timeline for when you plan to submit it upstream?
Quoted 18 lines · Joel Stanley
Quoted 17 lines · Jae Hyun Yoo
Hi Chia-Wei,
Quoted 12 lines · Wang
Update the Aspeed PECI driver with the AST2600 compatible string. A new comptabile string is needed for the extended HW feature of AST2600.
Chia-Wei, Wang (2):
peci: aspeed: Add AST2600 compatible string
dt-bindings: peci: aspeed: Add AST2600 compatibleDocumentation/devicetree/bindings/peci/peci-aspeed.txt | 1 + drivers/peci/peci-aspeed.c | 1 + 2 files changed, 2 insertions(+)
Quoted 6 lines
Quoted 2 lines
PECI subsystem isn't in linux upstream yet so you should submit it into OpenBMC dev-5.3 tree only.
OpenBMC has been carrying the out of tree patches for some time now. I haven't seen a new version posted for a while. Do you have a timeline for when you plan to submit it upstream?
Thanks for your effort for carrying the out of tree patches in OpenBMC. I don't have a exact timeline but I'm gonna upstream it as soon as it gets ready.
Thanks,
Jae
Hi Jae Hyun,
Thanks for the feedback.
For now should I use GitHub pull-request to submit the patches of PECI-related change to OpenBMC dev-5.3 tree only?
Regards,
Chiawei
************* Email Confidentiality Notice ********************
DISCLAIMER:
This message (and any attachments) may contain legally privileged and/or other confidential information. If you have received it in error, please notify the sender by reply e-mail and immediately delete the e-mail and any attachments without copying or disclosing the contents. Thank you.
-----Original Message-----
From: Jae Hyun Yoo [mailto:jae.hyun.yoo at linux.intel.com]
Sent: Thursday, October 3, 2019 7:43 AM
To: Joel Stanley <[email protected]>
Cc: ChiaWei Wang <[email protected]>; Jason M Biils <[email protected]>; Rob Herring <[email protected]>; Mark Rutland <[email protected]>; Andrew Jeffery <[email protected]>; linux-aspeed <[email protected]>; OpenBMC Maillist <[email protected]>; devicetree <[email protected]>; Linux ARM <[email protected]>; Linux Kernel Mailing List <[email protected]>; Ryan Chen <[email protected]>
Subject: Re: [PATCH 0/2] peci: aspeed: Add AST2600 compatible
Quoted 18 lines · Joel Stanley
Quoted 17 lines · Jae Hyun Yoo
Hi Chia-Wei,
Quoted 12 lines · Wang
Update the Aspeed PECI driver with the AST2600 compatible string. A new comptabile string is needed for the extended HW feature of AST2600.
Chia-Wei, Wang (2):
peci: aspeed: Add AST2600 compatible string
dt-bindings: peci: aspeed: Add AST2600 compatibleDocumentation/devicetree/bindings/peci/peci-aspeed.txt | 1 + drivers/peci/peci-aspeed.c | 1 + 2 files changed, 2 insertions(+)
Quoted 6 lines
Quoted 2 lines
PECI subsystem isn't in linux upstream yet so you should submit it into OpenBMC dev-5.3 tree only.
OpenBMC has been carrying the out of tree patches for some time now. I haven't seen a new version posted for a while. Do you have a timeline for when you plan to submit it upstream?
Thanks for your effort for carrying the out of tree patches in OpenBMC. I don't have a exact timeline but I'm gonna upstream it as soon as it gets ready.
Thanks,
Jae
Quoted 4 lines · ChiaWei Wang
Hi Jae Hyun,
Thanks for the feedback.
For now should I use GitHub pull-request to submit the patches of PECI-related change to OpenBMC dev-5.3 tree only?
You could submit this patch series to OpenBMC mailing list with [PATCH linux dev-5.3] prefix.
Thanks,
Jae
Sure. We will re-submit the patches with the revision suggested. Thanks.
Regards,
Chiawei
************* Email Confidentiality Notice ********************
DISCLAIMER:
This message (and any attachments) may contain legally privileged and/or other confidential information. If you have received it in error, please notify the sender by reply e-mail and immediately delete the e-mail and any attachments without copying or disclosing the contents. Thank you.
-----Original Message-----
From: Jae Hyun Yoo [mailto:jae.hyun.yoo at linux.intel.com]
Sent: Friday, October 4, 2019 12:20 AM
To: ChiaWei Wang <[email protected]>; Joel Stanley <[email protected]>
Cc: Jason M Biils <[email protected]>; Rob Herring <[email protected]>; Mark Rutland <[email protected]>; Andrew Jeffery <[email protected]>; linux-aspeed <[email protected]>; OpenBMC Maillist <[email protected]>; devicetree <[email protected]>; Linux ARM <[email protected]>; Linux Kernel Mailing List <[email protected]>; Ryan Chen <[email protected]>
Subject: Re: [PATCH 0/2] peci: aspeed: Add AST2600 compatible
Quoted 4 lines · ChiaWei Wang
Hi Jae Hyun,
Thanks for the feedback.
For now should I use GitHub pull-request to submit the patches of PECI-related change to OpenBMC dev-5.3 tree only?
You could submit this patch series to OpenBMC mailing list with [PATCH linux dev-5.3] prefix.
Thanks,
Jae