Skip to contentSkip to conversation

floppy: A couple of cleanups

PATCH Applied Andy Shevchenko 2 participants 7 messages Aug 25, 2025 – Aug 26, 2025

Subsystems (11)
Arm (32-bit) x86 PowerPC Block layer +7 more subsystems
lore
Share & tools
lore
#0 lore raw

v2 cover floppy: A couple of cleanups

There are a few places in architecture code for the floppy driver that may be cleaned up. Do it so.

Assumed to route via Andrew Morton's tree as floppy is basically orphaned.

Changelog v2:
- combined separate patches sent earlier into a series
- added tags (Helge, Geert)
- fixed typo in the commit message (Geert)

Andy Shevchenko (3):
floppy: Remove unused CROSS_64KB() macro from arch/ code
floppy: Replace custom SZ_64K constant
floppy: Sort headers alphabetically

 arch/alpha/include/asm/floppy.h    | 19 ----------
 arch/arm/include/asm/floppy.h      |  2 --
 arch/m68k/include/asm/floppy.h     |  4 ---
 arch/mips/include/asm/floppy.h     | 15 --------
 arch/parisc/include/asm/floppy.h   | 11 +++---
 arch/powerpc/include/asm/floppy.h  |  5 ---
 arch/sparc/include/asm/floppy_32.h |  3 --
 arch/sparc/include/asm/floppy_64.h |  3 --
 arch/x86/include/asm/floppy.h      |  8 ++---
 drivers/block/floppy.c             | 56 ++++++++++++++----------------
 10 files changed, 34 insertions(+), 92 deletions(-)
Signature · 1 line
2.50.1
#1 lore raw

PATCH v2 1/3 floppy: Remove unused CROSS_64KB() macro from arch/ code

Since the commit 3d86739c6343 ("floppy: always use the track buffer") the CROSS_64KB() is not used by the driver, remove the leftovers.

---
 arch/alpha/include/asm/floppy.h    | 19 -------------------
 arch/arm/include/asm/floppy.h      |  2 --
 arch/m68k/include/asm/floppy.h     |  4 ----
 arch/mips/include/asm/floppy.h     | 15 ---------------
 arch/parisc/include/asm/floppy.h   |  6 +-----
 arch/powerpc/include/asm/floppy.h  |  5 -----
 arch/sparc/include/asm/floppy_32.h |  3 ---
 arch/sparc/include/asm/floppy_64.h |  3 ---
 arch/x86/include/asm/floppy.h      |  5 +----
 9 files changed, 2 insertions(+), 60 deletions(-)
arch/alpha/include/asm/floppy.h +0 -19
index 64b42d9591fc..5a6239e65097 100644
@@ -90,25 +90,6 @@ static int FDC2 = -1;
 #define N_FDC 2
 #define N_DRIVE 8
 
-/*
- * Most Alphas have no problems with floppy DMA crossing 64k borders,
- * except for certain ones, like XL and RUFFIAN.
- *
- * However, the test is simple and fast, and this *is* floppy, after all,
- * so we do it for all platforms, just to make sure.
- *
- * This is advantageous in other circumstances as well, as in moving
- * about the PCI DMA windows and forcing the floppy to start doing
- * scatter-gather when it never had before, and there *is* a problem
- * on that platform... ;-}
- */
-
-static inline unsigned long CROSS_64KB(void *a, unsigned long s)
-{
-	unsigned long p = (unsigned long)a;
-	return ((p + s - 1) ^ p) & ~0xffffUL;
-}
-
 #define EXTRA_FLOPPY_PARAMS
 
 #endif /* __ASM_ALPHA_FLOPPY_H */
arch/arm/include/asm/floppy.h +0 -2
index e1cb04ed5008..e579f77162e9 100644
@@ -65,8 +65,6 @@ static unsigned char floppy_selects[4] = { 0x10, 0x21, 0x23, 0x33 };
 #define N_FDC 1
 #define N_DRIVE 4
 
-#define CROSS_64KB(a,s) (0)
-
 /*
  * This allows people to reverse the order of
  * fd0 and fd1, in case their hardware is
arch/m68k/include/asm/floppy.h +0 -4
index a4d0fea47c6b..dea98bbc0932 100644
@@ -107,13 +107,9 @@ static void fd_free_irq(void)
 
 #define fd_free_dma()             /* nothing */
 
-/* No 64k boundary crossing problems on Q40 - no DMA at all */
-#define CROSS_64KB(a,s) (0)
-
 #define DMA_MODE_READ  0x44    /* i386 look-alike */
 #define DMA_MODE_WRITE 0x48
 
-
 static int m68k_floppy_init(void)
 {
   use_virtual_dma =1;
arch/mips/include/asm/floppy.h +0 -15
index 021d09ae5670..44da2ff91f65 100644
@@ -34,21 +34,6 @@ static inline void fd_cacheflush(char * addr, long size)
 #define N_FDC 1			/* do you *really* want a second controller? */
 #define N_DRIVE 8
 
-/*
- * The DMA channel used by the floppy controller cannot access data at
- * addresses >= 16MB
- *
- * Went back to the 1MB limit, as some people had problems with the floppy
- * driver otherwise. It doesn't matter much for performance anyway, as most
- * floppy accesses go through the track buffer.
- *
- * On MIPSes using vdma, this actually means that *all* transfers go thru
- * the * track buffer since 0x1000000 is always smaller than KSEG0/1.
- * Actually this needs to be a bit more complicated since the so much different
- * hardware available with MIPS CPUs ...
- */
-#define CROSS_64KB(a, s) ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64)
-
 #define EXTRA_FLOPPY_PARAMS
 
 #include <floppy.h>
arch/parisc/include/asm/floppy.h +1 -5
index b318a7df52f6..df20dbef3ada 100644
@@ -22,13 +22,9 @@
 #define _CROSS_64KB(a,s,vdma) \
 (!(vdma) && ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64))
 
-#define CROSS_64KB(a,s) _CROSS_64KB(a,s,use_virtual_dma & 1)
-
-
 #define SW fd_routine[use_virtual_dma&1]
 #define CSW fd_routine[can_use_virtual_dma & 1]
 
-
 #define fd_inb(base, reg)		readb((base) + (reg))
 #define fd_outb(value, base, reg)	writeb(value, (base) + (reg))
 
@@ -206,7 +202,7 @@ static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
 static int hard_dma_setup(char *addr, unsigned long size, int mode, int io)
 {
 #ifdef FLOPPY_SANITY_CHECK
-	if (CROSS_64KB(addr, size)) {
+	if (_CROSS_64KB(addr, size, use_virtual_dma & 1)) {
 		printk("DMA crossing 64-K boundary %p-%p\n", addr, addr+size);
 		return -1;
 	}
arch/powerpc/include/asm/floppy.h +0 -5
index 34abf8bea2cc..f4dc657638b3 100644
@@ -206,11 +206,6 @@ static int FDC2 = -1;
 #define N_FDC 2			/* Don't change this! */
 #define N_DRIVE 8
 
-/*
- * The PowerPC has no problems with floppy DMA crossing 64k borders.
- */
-#define CROSS_64KB(a,s)	(0)
-
 #define EXTRA_FLOPPY_PARAMS
 
 #endif /* __KERNEL__ */
arch/sparc/include/asm/floppy_32.h +0 -3
index 836f6575aa1d..7251d1fed7a4 100644
@@ -96,9 +96,6 @@ static struct sun_floppy_ops sun_fdops;
 #define N_FDC    1
 #define N_DRIVE  8
 
-/* No 64k boundary crossing problems on the Sparc. */
-#define CROSS_64KB(a,s) (0)
-
 /* Routines unique to each controller type on a Sun. */
 static void sun_set_dor(unsigned char value, int fdc_82077)
 {
arch/sparc/include/asm/floppy_64.h +0 -3
index b0f633ce3518..135f9a49b6ba 100644
@@ -95,9 +95,6 @@ static int sun_floppy_types[2] = { 0, 0 };
 #define N_FDC    1
 #define N_DRIVE  8
 
-/* No 64k boundary crossing problems on the Sparc. */
-#define CROSS_64KB(a,s) (0)
-
 static unsigned char sun_82077_fd_inb(unsigned long base, unsigned int reg)
 {
 	udelay(5);
arch/x86/include/asm/floppy.h +1 -4
index 6ec3fc969ad5..e76cb74bbed2 100644
@@ -24,9 +24,6 @@
 	(!(vdma) &&							\
 	 ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64))
 
-#define CROSS_64KB(a, s) _CROSS_64KB(a, s, use_virtual_dma & 1)
-
-
 #define SW fd_routine[use_virtual_dma & 1]
 #define CSW fd_routine[can_use_virtual_dma & 1]
 
@@ -206,7 +203,7 @@ static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
 static int hard_dma_setup(char *addr, unsigned long size, int mode, int io)
 {
 #ifdef FLOPPY_SANITY_CHECK
-	if (CROSS_64KB(addr, size)) {
+	if (_CROSS_64KB(addr, size, use_virtual_dma & 1)) {
 		printk("DMA crossing 64-K boundary %p-%p\n", addr, addr+size);
 		return -1;
 	}
Signature · 1 line
2.50.1
#2 lore raw

PATCH v2 2/3 floppy: Replace custom SZ_64K constant

In reply to Andy Shevchenko

There are only two headers using the K_64 custom constant. Moreover, its usage tangles a code because the constant is defined in the C file, while users are in the headers. Replace it with well defined SZ_64K from sizes.h.

---
 arch/parisc/include/asm/floppy.h | 5 +++--
 arch/x86/include/asm/floppy.h    | 3 ++-
 drivers/block/floppy.c           | 2 --
 3 files changed, 5 insertions(+), 5 deletions(-)
arch/parisc/include/asm/floppy.h +3 -2
index df20dbef3ada..f15b69fea901 100644
@@ -8,9 +8,9 @@
 #ifndef __ASM_PARISC_FLOPPY_H
 #define __ASM_PARISC_FLOPPY_H
 
+#include <linux/sizes.h>
 #include <linux/vmalloc.h>
 
-
 /*
  * The DMA channel used by the floppy controller cannot access data at
  * addresses >= 16MB
@@ -20,7 +20,8 @@
  * floppy accesses go through the track buffer.
  */
 #define _CROSS_64KB(a,s,vdma) \
-(!(vdma) && ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64))
+	(!(vdma) && \
+	 ((unsigned long)(a) / SZ_64K != ((unsigned long)(a) + (s) - 1) / SZ_64K))
 
 #define SW fd_routine[use_virtual_dma&1]
 #define CSW fd_routine[can_use_virtual_dma & 1]
arch/x86/include/asm/floppy.h +2 -1
index e76cb74bbed2..e7a244051c62 100644
@@ -10,6 +10,7 @@
 #ifndef _ASM_X86_FLOPPY_H
 #define _ASM_X86_FLOPPY_H
 
+#include <linux/sizes.h>
 #include <linux/vmalloc.h>
 
 /*
@@ -22,7 +23,7 @@
  */
 #define _CROSS_64KB(a, s, vdma)						\
 	(!(vdma) &&							\
-	 ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64))
+	 ((unsigned long)(a) / SZ_64K != ((unsigned long)(a) + (s) - 1) / SZ_64K))
 
 #define SW fd_routine[use_virtual_dma & 1]
 #define CSW fd_routine[can_use_virtual_dma & 1]
drivers/block/floppy.c +0 -2
index 24be0c2c4075..d769a223fcc8 100644
@@ -233,8 +233,6 @@ static unsigned short virtual_dma_port = 0x3f0;
 irqreturn_t floppy_interrupt(int irq, void *dev_id);
 static int set_dor(int fdc, char mask, char data);
 
-#define K_64	0x10000		/* 64KB */
-
 /* the following is the mask of allowed drives. By default units 2 and
  * 3 of both floppy controllers are disabled, because switching on the
  * motor of these drives causes system hangs on some PCI computers. drive
Signature · 1 line
2.50.1
#3 lore raw

PATCH v2 3/3 floppy: Sort headers alphabetically

In reply to Andy Shevchenko

Sorting headers alphabetically helps locating duplicates, and makes it easier to figure out where to insert new headers.

---
 drivers/block/floppy.c | 54 +++++++++++++++++++++---------------------
 1 file changed, 27 insertions(+), 27 deletions(-)
drivers/block/floppy.c +27 -27
index d769a223fcc8..61d62019a38d 100644
@@ -163,35 +163,35 @@
 
 /* do print messages for unexpected interrupts */
 static int print_unex = 1;
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/timer.h>
-#include <linux/workqueue.h>
-#include <linux/fdreg.h>
-#include <linux/fd.h>
-#include <linux/hdreg.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/bio.h>
-#include <linux/string.h>
-#include <linux/jiffies.h>
-#include <linux/fcntl.h>
-#include <linux/delay.h>
-#include <linux/mc146818rtc.h>	/* CMOS defines */
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/major.h>
-#include <linux/platform_device.h>
-#include <linux/mod_devicetable.h>
-#include <linux/mutex.h>
-#include <linux/io.h>
-#include <linux/uaccess.h>
 #include <linux/async.h>
+#include <linux/bio.h>
 #include <linux/compat.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/fcntl.h>
+#include <linux/fd.h>
+#include <linux/fdreg.h>
+#include <linux/fs.h>
+#include <linux/hdreg.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/major.h>
+#include <linux/mc146818rtc.h>	/* CMOS defines */
+#include <linux/mm.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/uaccess.h>
+#include <linux/workqueue.h>
 
 /*
  * PS/2 floppies have much slower step rates than regular floppies.
Signature · 1 line
2.50.1
maintainer Applied
#4 lore raw
In reply to Andy Shevchenko
Quoted 11 lines · Andy Shevchenko

There are a few places in architecture code for the floppy driver that may be cleaned up. Do it so.

Assumed to route via Andrew Morton's tree as floppy is basically orphaned.

Changelog v2:
- combined separate patches sent earlier into a series
- added tags (Helge, Geert)
- fixed typo in the commit message (Geert)

[...]

Applied, thanks!

[1/3] floppy: Remove unused CROSS_64KB() macro from arch/ code

      commit: d74968780bf287958e2815be5f088dd6c7b7aa19
[2/3] floppy: Replace custom SZ_64K constant
      commit: 8e7ee0f6fa33934373c1c37e8cfb71cff2acea09
[3/3] floppy: Sort headers alphabetically
      commit: d4399e6eb27a803b73d17fe984448a823b4d3a30

Best regards,

Signature · 1 line
Jens Axboe
#5 lore raw
Quoted 10 lines · Jens Axboe
Quoted 9 lines · Andy Shevchenko

There are a few places in architecture code for the floppy driver that may be cleaned up. Do it so.

Assumed to route via Andrew Morton's tree as floppy is basically orphaned.

Changelog v2:
- combined separate patches sent earlier into a series
- added tags (Helge, Geert)
- fixed typo in the commit message (Geert)

[...]

Quoted 1 line

Applied, thanks!

Ah, thanks! It's good to know you can take (and actually did that) them.

Quoted 6 lines

[1/3] floppy: Remove unused CROSS_64KB() macro from arch/ code

      commit: d74968780bf287958e2815be5f088dd6c7b7aa19
[2/3] floppy: Replace custom SZ_64K constant
      commit: 8e7ee0f6fa33934373c1c37e8cfb71cff2acea09
[3/3] floppy: Sort headers alphabetically
      commit: d4399e6eb27a803b73d17fe984448a823b4d3a30
Signature · 2 lines
With Best Regards,
Andy Shevchenko
maintainer
#6 lore raw
Quoted 12 lines · Andy Shevchenko
Quoted 10 lines · Jens Axboe
Quoted 9 lines · Andy Shevchenko

There are a few places in architecture code for the floppy driver that may be cleaned up. Do it so.

Assumed to route via Andrew Morton's tree as floppy is basically orphaned.

Changelog v2:
- combined separate patches sent earlier into a series
- added tags (Helge, Geert)
- fixed typo in the commit message (Geert)

Quoted 5 lines

[...]

Quoted 1 line

Applied, thanks!

Ah, thanks! It's good to know you can take (and actually did that) them.

I've always been happy to apply floppy fixes or cleanups, I just treat it like any other orhpaned/unmaintained block driver.

Signature · 1 line
Jens Axboe