floppy: A couple of cleanups
Subsystems (11)
v2 cover floppy: A couple of cleanups
There are a few places in architecture code for the floppy driver that may be cleaned up. Do it so.
Assumed to route via Andrew Morton's tree as floppy is basically orphaned.
Changelog v2:
- combined separate patches sent earlier into a series
- added tags (Helge, Geert)
- fixed typo in the commit message (Geert)
Andy Shevchenko (3):
floppy: Remove unused CROSS_64KB() macro from arch/ code
floppy: Replace custom SZ_64K constant
floppy: Sort headers alphabetically
arch/alpha/include/asm/floppy.h | 19 ---------- arch/arm/include/asm/floppy.h | 2 -- arch/m68k/include/asm/floppy.h | 4 --- arch/mips/include/asm/floppy.h | 15 -------- arch/parisc/include/asm/floppy.h | 11 +++--- arch/powerpc/include/asm/floppy.h | 5 --- arch/sparc/include/asm/floppy_32.h | 3 -- arch/sparc/include/asm/floppy_64.h | 3 -- arch/x86/include/asm/floppy.h | 8 ++--- drivers/block/floppy.c | 56 ++++++++++++++---------------- 10 files changed, 34 insertions(+), 92 deletions(-)
Signature · 1 line
2.50.1
PATCH v2 2/3 floppy: Replace custom SZ_64K constant
There are only two headers using the K_64 custom constant. Moreover, its usage tangles a code because the constant is defined in the C file, while users are in the headers. Replace it with well defined SZ_64K from sizes.h.
--- arch/parisc/include/asm/floppy.h | 5 +++-- arch/x86/include/asm/floppy.h | 3 ++- drivers/block/floppy.c | 2 -- 3 files changed, 5 insertions(+), 5 deletions(-)
arch/parisc/include/asm/floppy.h +3 -2
@@ -8,9 +8,9 @@#ifndef __ASM_PARISC_FLOPPY_H#define __ASM_PARISC_FLOPPY_H +#include <linux/sizes.h> #include <linux/vmalloc.h> -/* * The DMA channel used by the floppy controller cannot access data at * addresses >= 16MB
@@ -20,7 +20,8 @@* floppy accesses go through the track buffer. */ #define _CROSS_64KB (a,s,vdma) \ -(!(vdma) && ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64)) + (!(vdma) && \ + ((unsigned long)(a) / SZ_64K != ((unsigned long)(a) + (s) - 1) / SZ_64K))#define SW fd_routine[use_virtual_dma&1]#define CSW fd_routine[can_use_virtual_dma & 1]
arch/x86/include/asm/floppy.h +2 -1
@@ -10,6 +10,7 @@#ifndef _ASM_X86_FLOPPY_H#define _ASM_X86_FLOPPY_H +#include <linux/sizes.h> #include <linux/vmalloc.h> /*
@@ -22,7 +23,7 @@*/ #define _CROSS_64KB (a, s, vdma) \ (!(vdma) && \ - ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64)) + ((unsigned long)(a) / SZ_64K != ((unsigned long)(a) + (s) - 1) / SZ_64K))#define SW fd_routine[use_virtual_dma & 1]#define CSW fd_routine[can_use_virtual_dma & 1]
drivers/block/floppy.c +0 -2
@@ -233,8 +233,6 @@ static unsigned short virtual_dma_port = 0x3f0;irqreturn_t floppy_interrupt (int irq,void *dev_id);static int set_dor (int fdc,char mask,char data); -#define K_64 0x10000/* 64KB */ -/* the following is the mask of allowed drives. By default units 2 and * 3 of both floppy controllers are disabled, because switching on the * motor of these drives causes system hangs on some PCI computers. drive
Signature · 1 line
2.50.1
PATCH v2 3/3 floppy: Sort headers alphabetically
In reply to Andy ShevchenkoSorting headers alphabetically helps locating duplicates, and makes it easier to figure out where to insert new headers.
--- drivers/block/floppy.c | 54 +++++++++++++++++++++--------------------- 1 file changed, 27 insertions(+), 27 deletions(-)
drivers/block/floppy.c +27 -27
@@ -163,35 +163,35 @@/* do print messages for unexpected interrupts */ static int print_unex =1 ; -#include <linux/module.h> -#include <linux/sched.h> -#include <linux/fs.h> -#include <linux/kernel.h> -#include <linux/timer.h> -#include <linux/workqueue.h> -#include <linux/fdreg.h> -#include <linux/fd.h> -#include <linux/hdreg.h> -#include <linux/errno.h> -#include <linux/slab.h> -#include <linux/mm.h> -#include <linux/bio.h> -#include <linux/string.h> -#include <linux/jiffies.h> -#include <linux/fcntl.h> -#include <linux/delay.h> -#include <linux/mc146818rtc.h> /* CMOS defines */ -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/major.h> -#include <linux/platform_device.h> -#include <linux/mod_devicetable.h> -#include <linux/mutex.h> -#include <linux/io.h> -#include <linux/uaccess.h> #include <linux/async.h> +#include <linux/bio.h> #include <linux/compat.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/fcntl.h> +#include <linux/fd.h> +#include <linux/fdreg.h> +#include <linux/fs.h> +#include <linux/hdreg.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/jiffies.h> +#include <linux/kernel.h> +#include <linux/major.h> +#include <linux/mc146818rtc.h> /* CMOS defines */ +#include <linux/mm.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/platform_device.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/uaccess.h> +#include <linux/workqueue.h> /* * PS/2 floppies have much slower step rates than regular floppies.
Signature · 1 line
2.50.1
PATCH v2 1/3 floppy: Remove unused CROSS_64KB() macro from arch/ code
In reply to Andy ShevchenkoSince the commit 3d86739c6343 ("floppy: always use the track buffer") the CROSS_64KB() is not used by the driver, remove the leftovers.
--- arch/alpha/include/asm/floppy.h | 19 ------------------- arch/arm/include/asm/floppy.h | 2 -- arch/m68k/include/asm/floppy.h | 4 ---- arch/mips/include/asm/floppy.h | 15 --------------- arch/parisc/include/asm/floppy.h | 6 +----- arch/powerpc/include/asm/floppy.h | 5 ----- arch/sparc/include/asm/floppy_32.h | 3 --- arch/sparc/include/asm/floppy_64.h | 3 --- arch/x86/include/asm/floppy.h | 5 +---- 9 files changed, 2 insertions(+), 60 deletions(-)
arch/alpha/include/asm/floppy.h +0 -19
@@ -90,25 +90,6 @@ static int FDC2 = -1;#define N_FDC 2#define N_DRIVE 8 -/* -* Most Alphas have no problems with floppy DMA crossing 64k borders, -* except for certain ones, like XL and RUFFIAN. -* -* However, the test is simple and fast, and this *is* floppy, after all, -* so we do it for all platforms, just to make sure. -* -* This is advantageous in other circumstances as well, as in moving -* about the PCI DMA windows and forcing the floppy to start doing -* scatter-gather when it never had before, and there *is* a problem -* on that platform... ;-} -*/ - -static inline unsigned long CROSS_64KB (void *a,unsigned long s) -{ -unsigned long p = (unsigned long )a; -return ((p + s -1 ) ^ p) & ~0xffffUL ; -} -#define EXTRA_FLOPPY_PARAMS #endif /* __ASM_ALPHA_FLOPPY_H */
arch/arm/include/asm/floppy.h +0 -2
@@ -65,8 +65,6 @@ static unsigned char floppy_selects[4] = { 0x10, 0x21, 0x23, 0x33 };#define N_FDC 1#define N_DRIVE 4 -#define CROSS_64KB (a,s) (0) -/* * This allows people to reverse the order of * fd0 and fd1, in case their hardware is
arch/m68k/include/asm/floppy.h +0 -4
@@ -107,13 +107,9 @@ static void fd_free_irq(void)#define fd_free_dma ()/* nothing */ -/* No 64k boundary crossing problems on Q40 - no DMA at all */ -#define CROSS_64KB (a,s) (0) -#define DMA_MODE_READ 0x44/* i386 look-alike */ #define DMA_MODE_WRITE 0x48 -static int m68k_floppy_init (void ) { use_virtual_dma =1 ;
arch/mips/include/asm/floppy.h +0 -15
@@ -34,21 +34,6 @@ static inline void fd_cacheflush(char * addr, long size)#define N_FDC 1/* do you *really* want a second controller? */ #define N_DRIVE 8 -/* -* The DMA channel used by the floppy controller cannot access data at -* addresses >= 16MB -* -* Went back to the 1MB limit, as some people had problems with the floppy -* driver otherwise. It doesn't matter much for performance anyway, as most -* floppy accesses go through the track buffer. -* -* On MIPSes using vdma, this actually means that *all* transfers go thru -* the * track buffer since 0x1000000 is always smaller than KSEG0/1. -* Actually this needs to be a bit more complicated since the so much different -* hardware available with MIPS CPUs ... -*/ -#define CROSS_64KB (a, s) ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64) -#define EXTRA_FLOPPY_PARAMS #include <floppy.h>
arch/parisc/include/asm/floppy.h +1 -5
@@ -22,13 +22,9 @@#define _CROSS_64KB (a,s,vdma) \ (!(vdma) && ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64)) -#define CROSS_64KB (a,s) _CROSS_64KB(a,s,use_virtual_dma & 1) - -#define SW fd_routine[use_virtual_dma&1]#define CSW fd_routine[can_use_virtual_dma & 1] -#define fd_inb (base, reg) readb((base) + (reg))#define fd_outb (value, base, reg) writeb(value, (base) + (reg))
@@ -206,7 +202,7 @@ static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)static int hard_dma_setup (char *addr,unsigned long size,int mode,int io) {#ifdef FLOPPY_SANITY_CHECK -if (CROSS_64KB (addr, size)) { +if (_CROSS_64KB (addr, size, use_virtual_dma &1 )) {printk ("DMA crossing 64-K boundary %p-%p\n" , addr, addr+size);return -1 ; }
arch/powerpc/include/asm/floppy.h +0 -5
@@ -206,11 +206,6 @@ static int FDC2 = -1;#define N_FDC 2/* Don't change this! */ #define N_DRIVE 8 -/* -* The PowerPC has no problems with floppy DMA crossing 64k borders. -*/ -#define CROSS_64KB (a,s) (0) -#define EXTRA_FLOPPY_PARAMS #endif /* __KERNEL__ */
arch/sparc/include/asm/floppy_32.h +0 -3
@@ -96,9 +96,6 @@ static struct sun_floppy_ops sun_fdops;#define N_FDC 1#define N_DRIVE 8 -/* No 64k boundary crossing problems on the Sparc. */ -#define CROSS_64KB (a,s) (0) -/* Routines unique to each controller type on a Sun. */ static void sun_set_dor (unsigned char value,int fdc_82077) {
arch/sparc/include/asm/floppy_64.h +0 -3
@@ -95,9 +95,6 @@ static int sun_floppy_types[2] = { 0, 0 };#define N_FDC 1#define N_DRIVE 8 -/* No 64k boundary crossing problems on the Sparc. */ -#define CROSS_64KB (a,s) (0) -static unsigned char sun_82077_fd_inb (unsigned long base,unsigned int reg) {udelay (5 );
arch/x86/include/asm/floppy.h +1 -4
@@ -24,9 +24,6 @@ (!(vdma) && \ ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64)) -#define CROSS_64KB (a, s) _CROSS_64KB(a, s, use_virtual_dma & 1) - -#define SW fd_routine[use_virtual_dma & 1]#define CSW fd_routine[can_use_virtual_dma & 1]
@@ -206,7 +203,7 @@ static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)static int hard_dma_setup (char *addr,unsigned long size,int mode,int io) {#ifdef FLOPPY_SANITY_CHECK -if (CROSS_64KB (addr, size)) { +if (_CROSS_64KB (addr, size, use_virtual_dma &1 )) {printk ("DMA crossing 64-K boundary %p-%p\n" , addr, addr+size);return -1 ; }
Signature · 1 line
2.50.1
Quoted 11 lines · Andy Shevchenko
There are a few places in architecture code for the floppy driver that may be cleaned up. Do it so.
Assumed to route via Andrew Morton's tree as floppy is basically orphaned.
Changelog v2:
- combined separate patches sent earlier into a series
- added tags (Helge, Geert)
- fixed typo in the commit message (Geert)[...]
Applied, thanks!
[1/3] floppy: Remove unused CROSS_64KB() macro from arch/ code
commit: d74968780bf287958e2815be5f088dd6c7b7aa19
[2/3] floppy: Replace custom SZ_64K constant
commit: 8e7ee0f6fa33934373c1c37e8cfb71cff2acea09
[3/3] floppy: Sort headers alphabetically
commit: d4399e6eb27a803b73d17fe984448a823b4d3a30Best regards,
Signature · 1 line
Jens Axboe
Quoted 10 lines · Jens Axboe
Quoted 9 lines · Andy Shevchenko
There are a few places in architecture code for the floppy driver that may be cleaned up. Do it so.
Assumed to route via Andrew Morton's tree as floppy is basically orphaned.
Changelog v2:
- combined separate patches sent earlier into a series
- added tags (Helge, Geert)
- fixed typo in the commit message (Geert)
[...]
Quoted 1 line
Applied, thanks!
Ah, thanks! It's good to know you can take (and actually did that) them.
Quoted 6 lines
[1/3] floppy: Remove unused
CROSS_64KB()macro fromarch/codecommit: d74968780bf287958e2815be5f088dd6c7b7aa19 [2/3] floppy: Replace custom SZ_64K constant commit: 8e7ee0f6fa33934373c1c37e8cfb71cff2acea09 [3/3] floppy: Sort headers alphabetically commit: d4399e6eb27a803b73d17fe984448a823b4d3a30
Signature · 2 lines
With Best Regards, Andy Shevchenko
Jens Axboe
maintainerQuoted 12 lines · Andy Shevchenko
Quoted 10 lines · Jens Axboe
Quoted 9 lines · Andy Shevchenko
There are a few places in architecture code for the floppy driver that may be cleaned up. Do it so.
Assumed to route via Andrew Morton's tree as floppy is basically orphaned.
Changelog v2:
- combined separate patches sent earlier into a series
- added tags (Helge, Geert)
- fixed typo in the commit message (Geert)
Quoted 5 lines
[...]
Quoted 1 line
Applied, thanks!
Ah, thanks! It's good to know you can take (and actually did that) them.
I've always been happy to apply floppy fixes or cleanups, I just treat it like any other orhpaned/unmaintained block driver.
Signature · 1 line
Jens Axboe