ppp: update Kconfig help message
Subsystems (3)
PATCH v2 1/1 ppp: update Kconfig help message
Both links of the PPPoE section are no longer valid, and the CVS version is no longer relevant.
- Replace the TLDP URL with the pppd project homepage.
- Update pppd version requirement for PPPoE.
- Update RP-PPPoE project homepage, and clarify that it's only needed for server mode.
---
v2:
- replace TLDP URL with pppd homepage
- update pppd version requirement
- document that rp-pppoe is only required for server
https://lore.kernel.org/netdev/[email protected]/
drivers/net/ppp/Kconfig | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-)
drivers/net/ppp/Kconfig +7 -9
@@ -13,10 +13,9 @@ config PPP otherwise you can't use it; most Internet access providers these days support PPP rather than SLIP. - To use PPP, you need an additional program called pppd as described - in the PPP-HOWTO, available at - <http://www.tldp.org/docs.html#howto>. Make sure that you have - the version of pppd recommended in <file:Documentation/Changes>. + To use PPP, you need an additional program called pppd, available at + <https://ppp.samba.org>. Make sure that you have the version of pppd + recommended in <file:Documentation/Changes>. The PPP option enlarges your kernel by about 16 KB. There are actually two versions of PPP: the traditional PPP for
@@ -116,11 +115,10 @@ config PPPOE help Support for PPP over Ethernet. - This driver requires the latest version of pppd from the CVS - repository at cvs.samba.org. Alternatively, see the - RoaringPenguin package (<http://www.roaringpenguin.com/pppoe>) - which contains instruction on how to use this driver (under - the heading "Kernel mode PPPoE"). + To work in client mode, pppd version 2.4.2 or later is required. + To work in server mode, the pppoe-server command from the RP-PPPoE + package is also required, available at + <https://dianne.skoll.ca/projects/rp-pppoe/>. choice prompt "Number of PPPoE hash bits"
Signature · 1 line
2.43.0
Hi,
Quoted 9 lines · Qingfang Deng
Both links of the PPPoE section are no longer valid, and the CVS version is no longer relevant.
- Replace the TLDP URL with the pppd project homepage.
- Update pppd version requirement for PPPoE.
- Update RP-PPPoE project homepage, and clarify that it's only needed for server mode.Signed-off-by Qingfang Deng <[email protected]>
FWIW: Acked-by: Jaco Kroon <[email protected]>
Looks good to me.
Quoted 44 lines
---
v2:
- replace TLDP URL with pppd homepage
- update pppd version requirement
- document that rp-pppoe is only required for server
https://lore.kernel.org/netdev/[email protected]/drivers/net/ppp/Kconfig | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-)drivers/net/ppp/Kconfig +7
-9@@ -13,10 +13,9 @@ config PPP otherwise you can't use it; most Internet access providers these days support PPP rather than SLIP. - To use PPP, you need an additional program called pppd as described - in the PPP-HOWTO, available at - <http://www.tldp.org/docs.html#howto>. Make sure that you have - the version of pppd recommended in <file:Documentation/Changes>. + To use PPP, you need an additional program called pppd, available at + <https://ppp.samba.org>. Make sure that you have the version of pppd + recommended in <file:Documentation/Changes>. The PPP option enlarges your kernel by about 16 KB. There are actually two versions of PPP: the traditional PPP for@@ -116,11 +115,10 @@ config PPPOE help Support for PPP over Ethernet. - This driver requires the latest version of pppd from the CVS - repository at cvs.samba.org. Alternatively, see the - RoaringPenguin package (<http://www.roaringpenguin.com/pppoe>) - which contains instruction on how to use this driver (under - the heading "Kernel mode PPPoE"). + To work in client mode, pppd version 2.4.2 or later is required. + To work in server mode, the pppoe-server command from the RP-PPPoE + package is also required, available at + <https://dianne.skoll.ca/projects/rp-pppoe/>. choice prompt "Number of PPPoE hash bits"
I didn't realize there were dead links in the Kconfig help texts. I've added a check for this to kconfirm and found many more instances! In most cases, I'm not the right person to be replacing these links; I'll send out a message soon to the mailing list with what's been detected. Thanks for the inspiration, Qingfang!
Also, LGTM, so:
This patch was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:
Hello:
This patch was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:
Quoted 9 lines · On Thu, 2 Apr 2026 13:00:50 +0800 you wrote:
Both links of the PPPoE section are no longer valid, and the CVS version is no longer relevant.
- Replace the TLDP URL with the pppd project homepage.
- Update pppd version requirement for PPPoE.
- Update RP-PPPoE project homepage, and clarify that it's only needed for server mode.[...]
Here is the summary with links:
- [net-next,v2] ppp: update Kconfig help message
https://git.kernel.org/netdev/net-next/c/779fae61a3c8
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html