Skip to contentSkip to conversation

ppp: update Kconfig help message

PATCH Applied Qingfang Deng 4 participants 4 messages Apr 2 – Apr 3

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 ppp: update Kconfig help message

Both links of the PPPoE section are no longer valid, and the CVS version is no longer relevant.

- Replace the TLDP URL with the pppd project homepage.
- Update pppd version requirement for PPPoE.
- Update RP-PPPoE project homepage, and clarify that it's only needed for server mode.

---
v2:
- replace TLDP URL with pppd homepage
- update pppd version requirement
- document that rp-pppoe is only required for server
https://lore.kernel.org/netdev/[email protected]/

 drivers/net/ppp/Kconfig | 16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)
drivers/net/ppp/Kconfig +7 -9
index f57fba84fe55..753354b4e36c 100644
@@ -13,10 +13,9 @@ config PPP
 	  otherwise you can't use it; most Internet access providers these
 	  days support PPP rather than SLIP.
 
-	  To use PPP, you need an additional program called pppd as described
-	  in the PPP-HOWTO, available at
-	  <http://www.tldp.org/docs.html#howto>.  Make sure that you have
-	  the version of pppd recommended in <file:Documentation/Changes>.
+	  To use PPP, you need an additional program called pppd, available at
+	  <https://ppp.samba.org>.  Make sure that you have the version of pppd
+	  recommended in <file:Documentation/Changes>.
 	  The PPP option enlarges your kernel by about 16 KB.
 
 	  There are actually two versions of PPP: the traditional PPP for
@@ -116,11 +115,10 @@ config PPPOE
 	help
 	  Support for PPP over Ethernet.
 
-	  This driver requires the latest version of pppd from the CVS
-	  repository at cvs.samba.org.  Alternatively, see the
-	  RoaringPenguin package (<http://www.roaringpenguin.com/pppoe>)
-	  which contains instruction on how to use this driver (under
-	  the heading "Kernel mode PPPoE").
+	  To work in client mode, pppd version 2.4.2 or later is required.
+	  To work in server mode, the pppoe-server command from the RP-PPPoE
+	  package is also required, available at
+	  <https://dianne.skoll.ca/projects/rp-pppoe/>.
 
 choice
 	prompt "Number of PPPoE hash bits"
Signature · 1 line
2.43.0
#1 lore raw

Hi,

Quoted 9 lines · Qingfang Deng

Both links of the PPPoE section are no longer valid, and the CVS version is no longer relevant.

- Replace the TLDP URL with the pppd project homepage.
- Update pppd version requirement for PPPoE.
- Update RP-PPPoE project homepage, and clarify that it's only needed for server mode.

FWIW:  Acked-by: Jaco Kroon <[email protected]>

Looks good to me.

Quoted 44 lines

---
v2:
- replace TLDP URL with pppd homepage
- update pppd version requirement
- document that rp-pppoe is only required for server
https://lore.kernel.org/netdev/[email protected]/

  drivers/net/ppp/Kconfig | 16 +++++++---------
  1 file changed, 7 insertions(+), 9 deletions(-)
drivers/net/ppp/Kconfig +7 -9
index f57fba84fe55..753354b4e36c 100644
@@ -13,10 +13,9 @@ config PPP
  	  otherwise you can't use it; most Internet access providers these
  	  days support PPP rather than SLIP.
 
-	  To use PPP, you need an additional program called pppd as described
-	  in the PPP-HOWTO, available at
-	  <http://www.tldp.org/docs.html#howto>.  Make sure that you have
-	  the version of pppd recommended in <file:Documentation/Changes>.
+	  To use PPP, you need an additional program called pppd, available at
+	  <https://ppp.samba.org>.  Make sure that you have the version of pppd
+	  recommended in <file:Documentation/Changes>.
  	  The PPP option enlarges your kernel by about 16 KB.
 
  	  There are actually two versions of PPP: the traditional PPP for
@@ -116,11 +115,10 @@ config PPPOE
  	help
  	  Support for PPP over Ethernet.
 
-	  This driver requires the latest version of pppd from the CVS
-	  repository at cvs.samba.org.  Alternatively, see the
-	  RoaringPenguin package (<http://www.roaringpenguin.com/pppoe>)
-	  which contains instruction on how to use this driver (under
-	  the heading "Kernel mode PPPoE").
+	  To work in client mode, pppd version 2.4.2 or later is required.
+	  To work in server mode, the pppoe-server command from the RP-PPPoE
+	  package is also required, available at
+	  <https://dianne.skoll.ca/projects/rp-pppoe/>.
 
  choice
  	prompt "Number of PPPoE hash bits"
Reviewed-by on v2 1/1
#2 lore raw
In reply to Qingfang Deng

I didn't realize there were dead links in the Kconfig help texts. I've added a check for this to kconfirm and found many more instances! In most cases, I'm not the right person to be replacing these links; I'll send out a message soon to the mailing list with what's been detected. Thanks for the inspiration, Qingfang!

Also, LGTM, so:

#3 lore raw
In reply to Qingfang Deng
This patch was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:

Hello:

This patch was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:

Quoted 9 lines · On Thu, 2 Apr 2026 13:00:50 +0800 you wrote:

Both links of the PPPoE section are no longer valid, and the CVS version is no longer relevant.

- Replace the TLDP URL with the pppd project homepage.
- Update pppd version requirement for PPPoE.
- Update RP-PPPoE project homepage, and clarify that it's only needed for server mode.

[...]

Here is the summary with links:
- [net-next,v2] ppp: update Kconfig help message

    https://git.kernel.org/netdev/net-next/c/779fae61a3c8

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html