Question on /proc/cpuinfo
Hi...
Probably it is a stupid question, but... I wan to count the number of processors, cores and threads on a linux system. I do it by reading /proc/cpuinfo.
The problem is that the meaning of 'cpu cores' and 'siblings' seems to have changed over time. Nowadays, it looks like this:
Dual P4 Xeon with HT:
processor : 0
siblings : 1
cpu cores : 1
processor : 1
siblings : 1
cpu cores : 1
processor : 2
siblings : 1
cpu cores : 0
processor : 3
siblings : 1
cpu cores : 0
Single Atom N450
processor : 0
siblings : 1
cpu cores : 1
processor : 1
siblings : 1
cpu cores : 0
So it just sets logical 'fake' processors that have no core but one thread. And process would just be count 'processor' lines, add up 'cpu cores' lines and also add 'siblings' lines. Values of the latter ones are associated with the ligical processor, no the physical one.
Bu I have seen in google that in old docs and mail threads the values were associated with physical_id's, so in fact for the atom you would get something like
processor : 0
siblings : 2
cpu cores : 1
processor : 1
siblings : 2
cpu cores : 1
because both processors were in the same physical one.
Since when is it safe to read things the modern way (kernel version ?). Is there a better procedure to get this info ?
Signature · 1 line
J.A. Magallon <jamagallonn()gmail!com> \ Winter is coming...
Quoted 6 lines · JA Magallón
Hi...
Probably it is a stupid question, but... I wan to count the number of processors, cores and threads on a linux system. I do it by reading
/proc/cpuinfo.
...
Quoted 4 lines
Since when is it safe to read things the modern way (kernel version ?). Is there a better procedure to get this info ?
Probably lscpu(1) is better for you, on my laptop it outputs:
% lscpu
Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 2 On-line CPU(s) list: 0,1 Thread(s) per core: 1 Core(s) per socket: 2 Socket(s): 1 NUMA node(s): 1 Vendor ID: GenuineIntel CPU family: 6 Model: 23 Stepping: 10 CPU MHz: 2401.000 BogoMIPS: 4788.03 Virtualization: VT-x L1d cache: 32K L1i cache: 32K L2 cache: 3072K NUMA node0 CPU(s): 0,1
Quoted 8 lines · Cong Wang
Quoted 5 lines · JA Magallón
Hi...
Probably it is a stupid question, but... I wan to count the number of processors, cores and threads on a linux system. I do it by reading
/proc/cpuinfo.Probably lscpu(1) is better for you, on my laptop it outputs:
Programmatically (for scripts), you want to count the number of /sys/devices/system/cpu/cpu[0-9]*. Grepping around output meant for humans (cpuinfo, lscpu) is always a bad idea.