Skip to contentSkip to conversation

Question on /proc/cpuinfo

DISCUSSION JA Magallón 3 participants 3 messages Sep 13, 2012 – Sep 23, 2012

lore
Share & tools
lore
#0 lore raw

Hi...

Probably it is a stupid question, but... I wan to count the number of processors, cores and threads on a linux system. I do it by reading /proc/cpuinfo.

The problem is that the meaning of 'cpu cores' and 'siblings' seems to have changed over time. Nowadays, it looks like this:

Dual P4 Xeon with HT:
processor : 0
siblings : 1
cpu cores : 1
processor : 1
siblings : 1
cpu cores : 1
processor : 2
siblings : 1
cpu cores : 0
processor : 3
siblings : 1
cpu cores : 0

Single Atom N450
processor : 0
siblings : 1
cpu cores : 1
processor : 1
siblings : 1
cpu cores : 0

So it just sets logical 'fake' processors that have no core but one thread. And process would just be count 'processor' lines, add up 'cpu cores' lines and also add 'siblings' lines. Values of the latter ones are associated with the ligical processor, no the physical one.

Bu I have seen in google that in old docs and mail threads the values were associated with physical_id's, so in fact for the atom you would get something like

processor : 0
siblings : 2
cpu cores : 1
processor : 1
siblings : 2
cpu cores : 1

because both processors were in the same physical one.

Since when is it safe to read things the modern way (kernel version ?). Is there a better procedure to get this info ?

Signature · 1 line
J.A. Magallon <jamagallonn()gmail!com>     \               Winter is coming...
#1 lore raw
Quoted 6 lines · JA Magallón

Hi...

Probably it is a stupid question, but... I wan to count the number of processors, cores and threads on a linux system. I do it by reading /proc/cpuinfo.

...

Quoted 4 lines

Since when is it safe to read things the modern way (kernel version ?). Is there a better procedure to get this info ?

Probably lscpu(1) is better for you, on my laptop it outputs:

% lscpu

Architecture:          x86_64
CPU op-mode(s):        32-bit, 64-bit
Byte Order:            Little Endian
CPU(s):                2
On-line CPU(s) list:   0,1
Thread(s) per core:    1
Core(s) per socket:    2
Socket(s):             1
NUMA node(s):          1
Vendor ID:             GenuineIntel
CPU family:            6
Model:                 23
Stepping:              10
CPU MHz:               2401.000
BogoMIPS:              4788.03
Virtualization:        VT-x
L1d cache:             32K
L1i cache:             32K
L2 cache:              3072K
NUMA node0 CPU(s):     0,1
#2 lore raw
Quoted 8 lines · Cong Wang
Quoted 5 lines · JA Magallón

Hi...

Probably it is a stupid question, but... I wan to count the number of processors, cores and threads on a linux system. I do it by reading /proc/cpuinfo.

Probably lscpu(1) is better for you, on my laptop it outputs:

Programmatically (for scripts), you want to count the number of /sys/devices/system/cpu/cpu[0-9]*. Grepping around output meant for humans (cpuinfo, lscpu) is always a bad idea.