mxs-bootloader: Barebox entry point symbol changed in 2012.08
PATCH 1/1 mxs-bootloader: Barebox entry point symbol changed in 2012.08
--- boot/mxs-bootlets/barebox_ivt.bd | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
boot/mxs-bootlets/barebox_ivt.bd +1 -1
@@ -28,7 +28,7 @@ section (0) { //---------------------------------------------------------- load barebox; - load ivt (entry = barebox:exception_vectors) > 0x8000; + load ivt (entry = barebox:start) > 0x8000; hab call 0x8000; }
Signature · 1 line
1.7.9.5
PATCH 1/1 mxs-bootloader: Barebox entry point symbol changed in 2012.08
Quoted 10 lines · Maxime Ripard
Signed-off-by Maxime Ripard<[email protected]>--- boot/mxs-bootlets/barebox_ivt.bd | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)boot/mxs-bootlets/barebox_ivt.bd +0
-0
boot/mxs-bootlets/barebox_ivt.bd section (0) { · line 34
Quoted 8 lines
boot/mxs-bootlets/barebox_ivt.bd +1
-1@@ -28,7 +28,7 @@ section (0) { //---------------------------------------------------------- load barebox; - load ivt (entry = barebox:exception_vectors)> 0x8000; + load ivt (entry = barebox:start)> 0x8000; hab call 0x8000; }
Shouldn't this somehow depend on the selected barebox version then?
Regards,
Arnout
Signature · 6 lines
Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286540 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
PATCH 1/1 mxs-bootloader: Barebox entry point symbol changed in 2012.08
Hi Arnout,
Le 18/10/2012 21:53, Arnout Vandecappelle a ?crit :
Quoted 14 lines · Maxime Ripard
Quoted 13 lines
Signed-off-by Maxime Ripard<[email protected]>--- boot/mxs-bootlets/barebox_ivt.bd | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)boot/mxs-bootlets/barebox_ivt.bd +0
-0@@ -28,7 +28,7 @@ section (0) { //----------------------------------------------------------
Quoted 8 lines
boot/mxs-bootlets/barebox_ivt.bd section (0) { · line 34
Quoted 6 lines
boot/mxs-bootlets/barebox_ivt.bd +1
-1load barebox; - load ivt (entry = barebox:exception_vectors)> 0x8000; + load ivt (entry = barebox:start)> 0x8000; hab call 0x8000; }Shouldn't this somehow depend on the selected barebox version then?
Well, I thought so at first, but since the next barebox release is in less than two weeks now, and the 2012.07 (the only one we support that is still using exception_vectors symbol) will be removed at that time, so I finally gave up to write that code, just to have it removed/be irrelevant in two weeks.
Maxime
Signature · 4 lines
Maxime Ripard, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com
PATCH 1/1 mxs-bootloader: Barebox entry point symbol changed in 2012.08
In reply to Arnout VandecappelleQuoted 8 lines
Quoted 8 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Arnout" == Arnout Vandecappelle <[email protected]> writes:
load barebox;
(quoted diff) +1
-1- load ivt (entry = barebox:exception_vectors)> 0x8000; + load ivt (entry = barebox:start)> 0x8000;hab call
0x8000;}
Arnout> Shouldn't this somehow depend on the selected barebox version then?
Indeed. What happens if people use <2012.08?
Signature · 1 line
Bye, Peter Korsgaard
PATCH 1/1 mxs-bootloader: Barebox entry point symbol changed in 2012.08
Le 19/10/2012 11:00, Peter Korsgaard a ?crit :
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Arnout" == Arnout Vandecappelle <[email protected]> writes:
load barebox;
(quoted diff) +1
-1- load ivt (entry = barebox:exception_vectors)> 0x8000; + load ivt (entry = barebox:start)> 0x8000;hab call
0x8000;
Quoted 5 lines
Quoted 1 line
Quoted 1 line
}
Arnout> Shouldn't this somehow depend on the selected barebox version then?
Indeed. What happens if people use <2012.08?
It will fail to execute barebox, and will loop trying to execute it. But once again, if things go as usual, this is only a matter of two weeks...
I can resubmit in two weeks if you prefer.
Signature · 4 lines
Maxime Ripard, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com
PATCH 1/1 mxs-bootloader: Barebox entry point symbol changed in 2012.08
In reply to Maxime RipardHi Peter,
Le 18/10/2012 10:02, Maxime Ripard a ?crit :
Quoted 10 lines
Signed-off-by Maxime Ripard <[email protected]>--- boot/mxs-bootlets/barebox_ivt.bd | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)boot/mxs-bootlets/barebox_ivt.bd +0
-0
boot/mxs-bootlets/barebox_ivt.bd section (0) { · line 34
Quoted 8 lines
boot/mxs-bootlets/barebox_ivt.bd +1
-1@@ -28,7 +28,7 @@ section (0) { //---------------------------------------------------------- load barebox; - load ivt (entry = barebox:exception_vectors) > 0x8000; + load ivt (entry = barebox:start) > 0x8000; hab call 0x8000; }
Can we apply this patch now that all supported barebox versions have this entry point ?
Thanks,
Maxime
Signature · 4 lines
Maxime Ripard, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com
PATCH 1/1 mxs-bootloader: Barebox entry point symbol changed in 2012.08
Quoted 9 lines
Quoted 9 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Maxime" == Maxime Ripard <[email protected]> writes:
load barebox;
boot/mxs-bootlets/barebox_ivt.bd +1
-1- load ivt (entry = barebox:exception_vectors) > 0x8000; + load ivt (entry = barebox:start) > 0x8000;hab call
0x8000;}
Maxime> Can we apply this patch now that all supported barebox versions have Maxime> this entry point ?
Yes, will do so now. Thanks for reminding me.
Signature · 1 line
Bye, Peter Korsgaard
PATCH 1/1 mxs-bootloader: Barebox entry point symbol changed in 2012.08
In reply to Maxime RipardQuoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Maxime" == Maxime Ripard <[email protected]> writes:
Maxime> Signed-off-by: Maxime Ripard <[email protected]>
Committed, thanks.
Signature · 1 line
Bye, Peter Korsgaard