snd_pcm_sw_params_set_start_threshold() functionality
Hello,
snd_pcm_sw_params_set_start_threshold() API description
explains, "PCM is automatically started when playback frames available to PCM are >= threshold"
I want to know, whether above pre-buffering(threshold)
mechanism is only during the start of playback ?
OR
Also if my playback device goes to XRUN state, Again next
time when i prepare my playback device using snd_pcm_prepare(). Again the prebuffering (threshold) will occur since i have set snd_pcm_sw_params_set_start_threshold() to N periods in software params.
Best Regards,
Thanks in advance,
Irfan...
Please let me know if my below understanding is correct :
snd_pcm_sw_params_set_start_threshold() explains :
"PCM is automatically started when playback frames available to PCM are >= threshold or when requested capture frames are >= threshold"
PCM has below states :
SND_PCM_STATE_OPEN OpenSND_PCM_STATE_SETUP Setup installedSND_PCM_STATE_PREPARED Ready to startSND_PCM_STATE_RUNNING RunningSND_PCM_STATE_XRUN Stopped: underrun (playback) or overrun (capture) detectedSND_PCM_STATE_DRAINING Draining: running (playback) or stopped (capture)SND_PCM_STATE_PAUSED PausedSND_PCM_STATE_SUSPENDED Hardware is suspendedSND_PCM_STATE_DISCONNECTED Hardware is disconnected
When ever underrun occurs, PCM device state goes to XRUN state.
To bring back the PCM playback device to playback {Ready to start}, we use snd_pcm_prepare().
*Thus snd_pcm_sw_params_set_start_threshold() should again prebuffer(threshold) X periods of data {which we have set in software params}, once again after the XRUN state is recovered.*
Thanks and regards,
Irfan
Quoted 15 lines · irfanks
Hello,
snd_pcm_sw_params_set_start_threshold()API description
explains, "PCM is automatically started when playback frames available to PCM are >= threshold"I want to know, whether above pre-buffering(threshold)
mechanism is only during the start of playback ?
OR
Also if my playback device goes to XRUN state, Again next
time when i prepare my playback device usingsnd_pcm_prepare(). Again the prebuffering (threshold) will occur since i have setsnd_pcm_sw_params_set_start_threshold()to N periods in software params.Best Regards,
Thanks in advance,
Irfan...