qla2xxx: Update the FTP site references in the driver sources.
Quoted 14 lines · Giridhar Malavali
From: Giridhar Malavali <[email protected]>
Signed-off-by Giridhar Malavali <[email protected]>Signed-off-by Saurav Kashyap <[email protected]>--- drivers/scsi/qla2xxx/qla_init.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)drivers/scsi/qla2xxx/qla_init.c +0
-0
drivers/scsi/qla2xxx/qla_init.c qla24xx_load_risc_flash(scsi_qla_host_t *vha, uint32_t *srisc_addr, · line 5060
Quoted 8 lines
drivers/scsi/qla2xxx/qla_init.c +1
-1@@ -5054,7 +5054,7 @@ qla24xx_load_risc_flash(scsi_qla_host_t *vha, uint32_t *srisc_addr,return rval; } -#define QLA_FW_URL "ftp://ftp.qlogic.com/outgoing/linux/firmware/" +#define QLA_FW_URL "http://ldriver.qlogic.com/firmware/"int qla2x00_load_risc (scsi_qla_host_t *vha,uint32_t *srisc_addr)
qla2xxx/Kconfig should also be changed:
Firmware images can be retrieved from:
ftp://ftp.qlogic.com/outgoing/linux/firmware/
FYI, they are also included in linux-firmware.
Quoted 27 lines · Xose Vazquez Perez
Quoted 13 lines · Giridhar Malavali
From: Giridhar Malavali <[email protected]>
Signed-off-by Giridhar Malavali <[email protected]>Signed-off-by Saurav Kashyap <[email protected]>--- drivers/scsi/qla2xxx/qla_init.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)drivers/scsi/qla2xxx/qla_init.c +0
-0drivers/scsi/qla2xxx/qla_init.c qla24xx_load_risc_flash(scsi_qla_host_t *vha, uint32_t *srisc_addr,
Quoted 9 lines
drivers/scsi/qla2xxx/qla_init.c +1
-2@@ -5054,7 +5054,7 @@ qla24xx_load_risc_flash(scsi_qla_host_t *vha, uint32_t *srisc_addr,return rval; } -#define QLA_FW_URL "ftp://ftp.qlogic.com/outgoing/linux/firmware/" +#define QLA_FW_URL "http://ldriver.qlogic.com/firmware/"int qla2x00_load_risc (scsi_qla_host_t *vha,uint32_t *srisc_addr) --qla2xxx/Kconfig should also be changed:
Quoted 6 lines
Firmware images can be retrieved from:
ftp://ftp.qlogic.com/outgoing/linux/firmware/
FYI, they are also included in linux-firmware.
Thanks for pointing this out Xose. We'll be posting a patch soon to fix the firmware link in the Kconfig files.
Quoted 6 lines
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
________________________________
This message and any attached documents contain information from QLogic Corporation or its wholly-owned subsidiaries that may be confidential. If you are not the intended recipient, you may not read, copy, distribute, or use this information. If you have received this transmission in error, please notify the sender immediately by reply e-mail and then delete this message.