Skip to contentSkip to conversation

qla2xxx: Update the FTP site references in the driver sources.

PATCH Xose Vazquez Perez 2 participants 2 messages Feb 11, 2013 – Feb 12, 2013 SCSI

lore
Share & tools
lore
#0 lore raw
Quoted 14 lines · Giridhar Malavali

From: Giridhar Malavali <[email protected]>

---
 drivers/scsi/qla2xxx/qla_init.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/scsi/qla2xxx/qla_init.c +0 -0
index a581c85..bbf5688 100644

drivers/scsi/qla2xxx/qla_init.c qla24xx_load_risc_flash(scsi_qla_host_t *vha, uint32_t *srisc_addr, · line 5060

Quoted 8 lines
drivers/scsi/qla2xxx/qla_init.c +1 -1
@@ -5054,7 +5054,7 @@ qla24xx_load_risc_flash(scsi_qla_host_t *vha, uint32_t *srisc_addr,
 	return rval;
 }
 
-#define QLA_FW_URL "ftp://ftp.qlogic.com/outgoing/linux/firmware/"
+#define QLA_FW_URL "http://ldriver.qlogic.com/firmware/"
 
 int
 qla2x00_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)

qla2xxx/Kconfig should also be changed:

Firmware images can be retrieved from:

ftp://ftp.qlogic.com/outgoing/linux/firmware/

FYI, they are also included in linux-firmware.

#1 lore raw
Quoted 27 lines · Xose Vazquez Perez
Quoted 13 lines · Giridhar Malavali

From: Giridhar Malavali <[email protected]>

---
 drivers/scsi/qla2xxx/qla_init.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/scsi/qla2xxx/qla_init.c +0 -0
index a581c85..bbf5688 100644

drivers/scsi/qla2xxx/qla_init.c qla24xx_load_risc_flash(scsi_qla_host_t *vha, uint32_t *srisc_addr,

Quoted 9 lines
drivers/scsi/qla2xxx/qla_init.c +1 -2
@@ -5054,7 +5054,7 @@ qla24xx_load_risc_flash(scsi_qla_host_t *vha, uint32_t *srisc_addr,
     return rval;
 }
 
-#define QLA_FW_URL "ftp://ftp.qlogic.com/outgoing/linux/firmware/"
+#define QLA_FW_URL "http://ldriver.qlogic.com/firmware/"
 
 int
 qla2x00_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
--

qla2xxx/Kconfig should also be changed:

Quoted 6 lines

Firmware images can be retrieved from:

ftp://ftp.qlogic.com/outgoing/linux/firmware/

FYI, they are also included in linux-firmware.

Thanks for pointing this out Xose. We'll be posting a patch soon to fix the firmware link in the Kconfig files.

Quoted 6 lines

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

________________________________

This message and any attached documents contain information from QLogic Corporation or its wholly-owned subsidiaries that may be confidential. If you are not the intended recipient, you may not read, copy, distribute, or use this information. If you have received this transmission in error, please notify the sender immediately by reply e-mail and then delete this message.