arm: mvebu: enable the third USB interface on OpenBlocks AX3
PATCH 1/1 arm: mvebu: enable the third USB interface on OpenBlocks AX3
Besides the two "classic" USB interfaces with normal USB ports on the front side, the PlatHome OpenBlocks AX3 uses the third USB interface of the Marvell SoC in the mini-PCIe connector. This allows certain mini-PCIe cards to expose parts of their functionality as a USB peripheral.
This commit enables this third USB interface in the OpenBlocks AX3 Device Tree, and also adds comments on top of the two other USB interfaces so that the Device Tree makes it clear which USB interface at the SoC level matches which USB interface visible on the board.
--- arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 9 +++++++++ 1 file changed, 9 insertions(+)
arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +9 -0
@@ -134,13 +134,22 @@ nr-ports = <2>; status = "okay"; }; + + /* Front side USB 0 */ usb at 50000 { status = "okay"; }; + + /* Front side USB 1 */ usb at 51000 { status = "okay"; }; + /* USB interface in the mini-PCIe connector */ + usb at 52000 { + status = "okay"; + }; + devbus-bootcs at 10400 { status = "okay"; ranges = <0 0xf0000000 0x8000000>; /* @addr 0xf000000, size 0x8000000 */
Signature · 1 line
1.7.9.5
PATCH 1/1 arm: mvebu: enable the third USB interface on OpenBlocks AX3
Dear Mr. Petazzoni
Quoted 10 lines
Besides the two "classic" USB interfaces with normal USB ports on the front side, the PlatHome OpenBlocks AX3 uses the third USB interface of the Marvell SoC in the mini-PCIe connector. This allows certain mini-PCIe cards to expose parts of their functionality as a USB peripheral.
This commit enables this third USB interface in the OpenBlocks AX3 Device Tree, and also adds comments on top of the two other USB interfaces so that the Device Tree makes it clear which USB interface at the SoC level matches which USB interface visible on the board.
I see the following messages by dmesg with your patch for linux-3.10-rc1 and 3.9.2.
...
usb 3-1: New USB device found, idVendor=0a5c, idProduct=219c usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 3-1: Product: Broadcom BCM2070 Bluetooth Device
usb 3-1: Manufacturer: Broadcom Corp
usb 3-1: SerialNumber: B4749F63C1B6
...
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
...
Best regards
Atsushi Yamagata
--- Atsushi Yamagata
PATCH 1/1 arm: mvebu: enable the third USB interface on OpenBlocks AX3
Hi Thomas,
Quoted 16 lines · yamagata at plathome.co.jp
Dear Mr. Petazzoni
Quoted 10 lines
Besides the two "classic" USB interfaces with normal USB ports on the front side, the PlatHome OpenBlocks AX3 uses the third USB interface of the Marvell SoC in the mini-PCIe connector. This allows certain mini-PCIe cards to expose parts of their functionality as a USB peripheral.
This commit enables this third USB interface in the OpenBlocks AX3 Device Tree, and also adds comments on top of the two other USB interfaces so that the Device Tree makes it clear which USB interface at the SoC level matches which USB interface visible on the board.
I see the following messages by dmesg with your patch for linux-3.10-rc1 and 3.9.2.
Quoted 14 lines
...
usb 3-1: New USB device found, idVendor=0a5c, idProduct=219c usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 3-1: Product: Broadcom BCM2070 Bluetooth Device
usb 3-1: Manufacturer: Broadcom Corp
usb 3-1: SerialNumber: B4749F63C1B6
...
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
This patch is nice and adds useful information.
I applied and tested on my OpenBlocks AX3 and get the 3rd USB interface detected. As I don't have any mini-PCIe card which use USB, I didn't tested it furthermore, but as Atsushi Yamagata managed to detect an USB device on this interface, we can be pretty confident with this patch:
Thanks,
Signature · 4 lines
Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com
PATCH 1/1 arm: mvebu: enable the third USB interface on OpenBlocks AX3
Hi Gregory,
Quoted 5 lines · Gregory CLEMENT
I applied and tested on my OpenBlocks AX3 and get the 3rd USB interface detected. As I don't have any mini-PCIe card which use USB, I didn't tested it furthermore, but as Atsushi Yamagata managed to detect an USB device on this interface, we can be pretty confident with this patch:
I do have a mini-PCIe to PCIe+USB adapter [1]. I have plugged it with a USB flash and it was correctly detected as well after I applied the patch :
usb 3-1: new high-speed USB device number 2 using orion-ehci usb 3-1: New USB device found, idVendor=0781, idProduct=5567 usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 3-1: Product: Cruzer Blade
usb 3-1: Manufacturer: SanDisk
Best regards,
Willy
PATCH 1/1 arm: mvebu: enable the third USB interface on OpenBlocks AX3
In reply to yamagata at plathome.co.jpMr Yamagata, Willy,
I don't like to assume for people, so if you could please provided a "Tested-by:" I'd appreciate it.
thx,
Jason.
Quoted 41 lines · yamagata at plathome.co.jp
Dear Mr. Petazzoni
Quoted 10 lines
Besides the two "classic" USB interfaces with normal USB ports on the front side, the PlatHome OpenBlocks AX3 uses the third USB interface of the Marvell SoC in the mini-PCIe connector. This allows certain mini-PCIe cards to expose parts of their functionality as a USB peripheral.
This commit enables this third USB interface in the OpenBlocks AX3 Device Tree, and also adds comments on top of the two other USB interfaces so that the Device Tree makes it clear which USB interface at the SoC level matches which USB interface visible on the board.
I see the following messages by dmesg with your patch for linux-3.10-rc1 and 3.9.2.
...
usb 3-1: New USB device found, idVendor=0a5c, idProduct=219c usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 3-1: Product: Broadcom BCM2070 Bluetooth Device
usb 3-1: Manufacturer: Broadcom Corp
usb 3-1: SerialNumber: B4749F63C1B6
...
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
...Best regards
Atsushi Yamagata
--- Atsushi Yamagata_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 1/1 arm: mvebu: enable the third USB interface on OpenBlocks AX3
Quoted 4 lines · Jason Cooper
Mr Yamagata, Willy,
I don't like to assume for people, so if you could please provided a "Tested-by:" I'd appreciate it.
Yes of course, I didn't propose it in order to save you the work of collecting these tags :-)
Best regards,
Willy
PATCH 1/1 arm: mvebu: enable the third USB interface on OpenBlocks AX3
Quoted 10 lines · Willy Tarreau
Quoted 4 lines · Jason Cooper
Mr Yamagata, Willy,
I don't like to assume for people, so if you could please provided a "Tested-by:" I'd appreciate it.
Yes of course, I didn't propose it in order to save you the work of collecting these tags :-)
Tested-by Willy Tarreau <[email protected]>
Thanks!
Jason.
PATCH 1/1 arm: mvebu: enable the third USB interface on OpenBlocks AX3
In reply to Jason CooperDear Mr. Jason Cooper
Quoted 2 lines
I don't like to assume for people, so if you could please provided a "Tested-by:" I'd appreciate it.
Best regards
Atsushi Yamagata
--- Atsushi Yamagata
PATCH 1/1 arm: mvebu: enable the third USB interface on OpenBlocks AX3
Quoted 6 lines · yamagata at plathome.co.jp
Dear Mr. Jason Cooper
Quoted 2 lines
I don't like to assume for people, so if you could please provided a "Tested-by:" I'd appreciate it.
Tested-by Atsushi Yamagata <[email protected]>
Thanks!
Jason.
PATCH 1/1 arm: mvebu: enable the third USB interface on OpenBlocks AX3
In reply to Thomas PetazzoniQuoted 11 lines · Thomas Petazzoni
Besides the two "classic" USB interfaces with normal USB ports on the front side, the PlatHome OpenBlocks AX3 uses the third USB interface of the Marvell SoC in the mini-PCIe connector. This allows certain mini-PCIe cards to expose parts of their functionality as a USB peripheral.
This commit enables this third USB interface in the OpenBlocks AX3 Device Tree, and also adds comments on top of the two other USB interfaces so that the Device Tree makes it clear which USB interface at the SoC level matches which USB interface visible on the board.
Quoted 4 lines
Signed-off-by Thomas Petazzoni <[email protected]>--- arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 9 +++++++++ 1 file changed, 9 insertions(+)
Applied to mvebu/dt with Willy's and Mr. Yamagata's Tested-by's
thx,
Jason.