ARM: at91: dt: add USBA support
Subsystems (5)
v4 cover ARM: at91: dt: add USBA support
HI,
v4:
fix multi instance support
v3:
rebase againt 3.10-rc1 + dt macro cleanup
This patch serie finish to add the usb device support to dt for at91 with the usba support present on the last at91 generation since sam9g45
The following changes since commit b3f442b0eedbc20b5ce3f4a96530588d14901199:
ARM: at91: udpate defconfigs (2013-05-17 15:05:08 +0200)
are available in the git repository at:
git://github.com/at91linux/linux-at91.git j/for-3.11-usba
for you to fetch changes up to 910026a08e2c2205953f2507cc11f4822998989b:
ARM: at91: sam9m10g45ek add udc DT support (2013-05-20 23:52:17 +0800)
----------------------------------------------------------------
Jean-Christophe PLAGNIOL-VILLARD (7):
USB: gadget: atmel_usba: move global struct usba_ep usba_ep to struct usba_udc
USB: gadget: atmel_usba: allow multi instance
USB: gadget: atmel_usba: add DT support
ARM: at91: sam9x5 add udc DT support
ARM: at91: sam9x5ek add udc DT support
ARM: at91: sam9g45 add udc DT support
ARM: at91: sam9m10g45ek add udc DT support
Documentation/devicetree/bindings/usb/atmel-usb.txt | 82 ++++++++++++++++++++++++++++++ arch/arm/boot/dts/at91sam9g45.dtsi | 62 +++++++++++++++++++++++ arch/arm/boot/dts/at91sam9m10g45ek.dts | 5 ++ arch/arm/boot/dts/at91sam9x5.dtsi | 62 +++++++++++++++++++++++ arch/arm/boot/dts/at91sam9x5ek.dtsi | 5 ++ arch/arm/mach-at91/at91sam9g45.c | 2 + arch/arm/mach-at91/at91sam9x5.c | 2 + drivers/usb/gadget/Kconfig | 2 +- drivers/usb/gadget/atmel_usba_udc.c | 264 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----------------------------- drivers/usb/gadget/atmel_usba_udc.h | 2 + 10 files changed, 407 insertions(+), 81 deletions(-)
Best Regards,
J.
PATCH v4 1/7 USB: gadget: atmel_usba: move global struct usba_ep usba_ep to struct usba_udc
so we can have multiple usb gadget instance
--- drivers/usb/gadget/atmel_usba_udc.c | 20 +++++++++++--------- drivers/usb/gadget/atmel_usba_udc.h | 1 + 2 files changed, 12 insertions(+), 9 deletions(-)
drivers/usb/gadget/atmel_usba_udc.c +11 -9
@@ -29,7 +29,6 @@static struct usba_udc the_udc; -static struct usba_ep *usba_ep;#ifdef CONFIG_USB_GADGET_DEBUG_FS #include <linux/debugfs.h>
@@ -1147,7 +1146,7 @@ static int do_test_mode(struct usba_udc *udc)* Test_SE0_NAK: Force high-speed mode and set up ep0 * for Bulk IN transfers */ - ep = &usba_ep[0 ]; + ep = &udc->usba_ep[0 ];usba_writel (udc,TST ,USBA_BF (SPEED_CFG ,USBA_SPEED_CFG_FORCE_HIGH )); usba_ep_writel(ep, CFG,
@@ -1165,7 +1164,7 @@ static int do_test_mode(struct usba_udc *udc)break ;case 0x0400 :/* Test_Packet */ - ep = &usba_ep[0 ]; + ep = &udc->usba_ep[0 ];usba_ep_writel (ep,CFG ,USBA_BF (EPT_SIZE ,USBA_EPT_SIZE_64 ) | USBA_EPT_DIR_IN
@@ -1668,7 +1667,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)for (i =1 ; i <USBA_NR_ENDPOINTS ; i++)if (dma_status & (1 << i)) -usba_dma_irq (udc, &usba_ep[i]); +usba_dma_irq (udc, &udc->usba_ep[i]); } ep_status =USBA_BFEXT (EPT_INT , status);
@@ -1677,10 +1676,10 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)for (i =0 ; i <USBA_NR_ENDPOINTS ; i++)if (ep_status & (1 << i)) { -if (ep_is_control (&usba_ep[i])) -usba_control_irq (udc, &usba_ep[i]); +if (ep_is_control (&udc->usba_ep[i])) +usba_control_irq (udc, &udc->usba_ep[i]);else -usba_ep_irq (udc, &usba_ep[i]); +usba_ep_irq (udc, &udc->usba_ep[i]); } }
@@ -1705,7 +1704,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)DBG (DBG_BUS ,"%s bus reset detected\n" ,usb_speed_string (udc->gadget.speed)); - ep0 = &usba_ep[0 ]; + ep0 = &udc->usba_ep[0 ]; ep0->ep.desc = &usba_ep0_desc; ep0->state =WAIT_FOR_SETUP ; usba_ep_writel(ep0, CFG,
@@ -1841,6 +1840,7 @@ static int __init usba_udc_probe(struct platform_device *pdev)struct resource *regs, *fifo;struct clk *pclk, *hclk;struct usba_udc *udc = &the_udc; +static struct usba_ep *usba_ep;int irq, ret, i; regs =platform_get_resource (pdev,IORESOURCE_MEM ,CTRL_IOMEM_ID );
@@ -1896,6 +1896,8 @@ static int __init usba_udc_probe(struct platform_device *pdev)if (!usba_ep) goto err_alloc_ep; + udc->usba_ep = usba_ep; + the_udc.gadget.ep0 = &usba_ep[0 ].ep;INIT_LIST_HEAD (&usba_ep[0 ].ep.ep_list);
@@ -2008,7 +2010,7 @@ static int __exit usba_udc_remove(struct platform_device *pdev)usb_del_gadget_udc (&udc->gadget);for (i =1 ; i < pdata->num_ep; i++) -usba_ep_cleanup_debugfs (&usba_ep[i]); +usba_ep_cleanup_debugfs (&udc->usba_ep[i]);usba_cleanup_debugfs (udc);if (gpio_is_valid (udc->vbus_pin)) {
drivers/usb/gadget/atmel_usba_udc.h +1 -0
@@ -319,6 +319,7 @@ struct usba_udc {int vbus_pin_inverted;struct clk *pclk;struct clk *hclk; +struct usba_ep *usba_ep;u16 devstatus;
Signature · 1 line
1.7.10.4
PATCH v4 2/7 USB: gadget: atmel_usba: allow multi instance
drop static struct usba_udc the_udc
--- drivers/usb/gadget/atmel_usba_udc.c | 36 +++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-)
drivers/usb/gadget/atmel_usba_udc.c +18 -18
@@ -27,9 +27,6 @@#include "atmel_usba_udc.h" - -static struct usba_udc the_udc; -#ifdef CONFIG_USB_GADGET_DEBUG_FS #include <linux/debugfs.h> #include <linux/uaccess.h>
@@ -1013,16 +1010,13 @@ static void nop_release(struct device *dev) } -static struct usba_udc the_udc = { - .gadget = { - .ops = &usba_udc_ops, - .ep_list =LIST_HEAD_INIT (the_udc.gadget.ep_list), - .max_speed =USB_SPEED_HIGH , - .name ="atmel_usba_udc" , - .dev = { - .init_name ="gadget" , - .release = nop_release, - }, +struct usb_gadget usba_gadget_template = { + .ops = &usba_udc_ops, + .max_speed =USB_SPEED_HIGH , + .name ="atmel_usba_udc" , + .dev = { + .init_name ="gadget" , + .release = nop_release, }, };
@@ -1839,10 +1833,17 @@ static int __init usba_udc_probe(struct platform_device *pdev)struct usba_platform_data *pdata = pdev->dev.platform_data;struct resource *regs, *fifo;struct clk *pclk, *hclk; -struct usba_udc *udc = &the_udc; +struct usba_udc *udc;static struct usba_ep *usba_ep;int irq, ret, i; + udc =devm_kzalloc (&pdev->dev,sizeof (*udc),GFP_KERNEL ); +if (!udc) +return -ENOMEM ; + + udc->gadget = usba_gadget_template; +INIT_LIST_HEAD (&udc->gadget.ep_list); + regs =platform_get_resource (pdev,IORESOURCE_MEM ,CTRL_IOMEM_ID ); fifo =platform_get_resource (pdev,IORESOURCE_MEM ,FIFO_IOMEM_ID );if (!regs || !fifo || !pdata)
@@ -1897,8 +1898,7 @@ static int __init usba_udc_probe(struct platform_device *pdev) goto err_alloc_ep; udc->usba_ep = usba_ep; - - the_udc.gadget.ep0 = &usba_ep[0 ].ep; + udc->gadget.ep0 = &usba_ep[0 ].ep;INIT_LIST_HEAD (&usba_ep[0 ].ep.ep_list); usba_ep[0 ].ep_regs = udc->regs +USBA_EPT_BASE (0 );
@@ -1907,7 +1907,7 @@ static int __init usba_udc_probe(struct platform_device *pdev) usba_ep[0 ].ep.ops = &usba_ep_ops; usba_ep[0 ].ep.name = pdata->ep[0 ].name; usba_ep[0 ].ep.maxpacket = pdata->ep[0 ].fifo_size; - usba_ep[0 ].udc = &the_udc; + usba_ep[0 ].udc = udc;INIT_LIST_HEAD (&usba_ep[0 ].queue); usba_ep[0 ].fifo_size = pdata->ep[0 ].fifo_size; usba_ep[0 ].nr_banks = pdata->ep[0 ].nr_banks;
@@ -1924,7 +1924,7 @@ static int __init usba_udc_probe(struct platform_device *pdev) ep->ep.ops = &usba_ep_ops; ep->ep.name = pdata->ep[i].name; ep->ep.maxpacket = pdata->ep[i].fifo_size; - ep->udc = &the_udc; + ep->udc = udc;INIT_LIST_HEAD (&ep->queue); ep->fifo_size = pdata->ep[i].fifo_size; ep->nr_banks = pdata->ep[i].nr_banks;
Signature · 1 line
1.7.10.4
PATCH 2/7 USB: gadget: atmel_usba: allow multi instance
Quoted 5 lines · Jean-Christophe PLAGNIOL-VILLARD
drop static struct
usba_udcthe_udcSigned-off-by Jean-Christophe PLAGNIOL-VILLARD <[email protected]>Cc Nicolas Ferre <[email protected]>Cc linux-usb at vger.kernel.org
Quoted 96 lines
--- drivers/usb/gadget/atmel_usba_udc.c | 36 +++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-)drivers/usb/gadget/atmel_usba_udc.c +18
-18@@ -27,9 +27,6 @@#include "atmel_usba_udc.h" - -static struct usba_udc the_udc; -#ifdef CONFIG_USB_GADGET_DEBUG_FS #include <linux/debugfs.h> #include <linux/uaccess.h> @@ -1013,16 +1010,13 @@ static void nop_release(struct device *dev) } -static struct usba_udc the_udc = { - .gadget = { - .ops = &usba_udc_ops, - .ep_list =LIST_HEAD_INIT (the_udc.gadget.ep_list), - .max_speed =USB_SPEED_HIGH , - .name ="atmel_usba_udc" , - .dev = { - .init_name ="gadget" , - .release = nop_release, - }, +struct usb_gadget usba_gadget_template = { + .ops = &usba_udc_ops, + .max_speed =USB_SPEED_HIGH , + .name ="atmel_usba_udc" , + .dev = { + .init_name ="gadget" , + .release = nop_release, }, };@@ -1839,10 +1833,17 @@ static int __init usba_udc_probe(struct platform_device *pdev)struct usba_platform_data *pdata = pdev->dev.platform_data;struct resource *regs, *fifo;struct clk *pclk, *hclk; -struct usba_udc *udc = &the_udc; +struct usba_udc *udc;static struct usba_ep *usba_ep;int irq, ret, i; + udc =devm_kzalloc (&pdev->dev,sizeof (*udc),GFP_KERNEL ); +if (!udc) +return -ENOMEM ; + + udc->gadget = usba_gadget_template; +INIT_LIST_HEAD (&udc->gadget.ep_list); + regs =platform_get_resource (pdev,IORESOURCE_MEM ,CTRL_IOMEM_ID ); fifo =platform_get_resource (pdev,IORESOURCE_MEM ,FIFO_IOMEM_ID );if (!regs || !fifo || !pdata)@@ -1897,8 +1898,7 @@ static int __init usba_udc_probe(struct platform_device *pdev) goto err_alloc_ep; udc->usba_ep = usba_ep; - - the_udc.gadget.ep0 = &usba_ep[0 ].ep; + udc->gadget.ep0 = &usba_ep[0 ].ep;INIT_LIST_HEAD (&usba_ep[0 ].ep.ep_list); usba_ep[0 ].ep_regs = udc->regs +USBA_EPT_BASE (0 );@@ -1907,7 +1907,7 @@ static int __init usba_udc_probe(struct platform_device *pdev) usba_ep[0 ].ep.ops = &usba_ep_ops; usba_ep[0 ].ep.name = pdata->ep[0 ].name; usba_ep[0 ].ep.maxpacket = pdata->ep[0 ].fifo_size; - usba_ep[0 ].udc = &the_udc; + usba_ep[0 ].udc = udc;INIT_LIST_HEAD (&usba_ep[0 ].queue); usba_ep[0 ].fifo_size = pdata->ep[0 ].fifo_size; usba_ep[0 ].nr_banks = pdata->ep[0 ].nr_banks;@@ -1924,7 +1924,7 @@ static int __init usba_udc_probe(struct platform_device *pdev) ep->ep.ops = &usba_ep_ops; ep->ep.name = pdata->ep[i].name; ep->ep.maxpacket = pdata->ep[i].fifo_size; - ep->udc = &the_udc; + ep->udc = udc;INIT_LIST_HEAD (&ep->queue); ep->fifo_size = pdata->ep[i].fifo_size; ep->nr_banks = pdata->ep[i].nr_banks;Signature · 6 lines
1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo at vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Signature · 8 lines
balbi -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130523/4d1de033/attachment-0001.sig>
PATCH v4 3/7 USB: gadget: atmel_usba: add DT support
In reply to Jean-Christophe PLAGNIOL-VILLARDAllow to compile the driver all the time if AT91 enabled.
--- .../devicetree/bindings/usb/atmel-usb.txt | 82 ++++++++ drivers/usb/gadget/Kconfig | 2 +- drivers/usb/gadget/atmel_usba_udc.c | 220 ++++++++++++++------ drivers/usb/gadget/atmel_usba_udc.h | 1 + 4 files changed, 245 insertions(+), 60 deletions(-)
Documentation/devicetree/bindings/usb/atmel-usb.txt +82 -0
@@ -47,3 +47,85 @@ usb1: gadget at fffa4000 { interrupts = <10 4>; atmel,vbus-gpio = <&pioC 5 0>; }; + +Atmel High-Speed USB device controller + +Required properties: + - compatible: Should be "atmel,at91sam9rl-udc" + - reg: Address and length of the register set for the device + - interrupts: Should contain usba interrupt + - ep childnode: To specify the number of endpoints and their properties. + +Optional properties: + - atmel,vbus-gpio: If present, specifies a gpio that needs to be + activated for the bus to be powered. + +Required child node properties: + - name: Name of the endpoint. + - reg: Num of the endpoint. + - atmel,fifo-size: Size of the fifo. + - atmel,nb-banks: Number of banks. + - atmel,can-dma: Boolean to specify if the endpoint support DMA. + - atmel,can-isoc: Boolean to specify if the endpoint support ISOC. + +usb2: gadget at fff78000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91sam9rl-udc"; + reg = <0x00600000 0x80000 + 0xfff78000 0x400>; + interrupts = <27 4 0>; + atmel,vbus-gpio = <&pioB 19 0>; + + ep0 { + reg = <0>; + atmel,fifo-size = <64>; + atmel,nb-banks = <1>; + }; + + ep1 { + reg = <1>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep2 { + reg = <2>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep3 { + reg = <3>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + }; + + ep4 { + reg = <4>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + }; + + ep5 { + reg = <5>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep6 { + reg = <6>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + atmel,can-isoc; + }; +};
drivers/usb/gadget/Kconfig +1 -1
@@ -156,7 +156,7 @@ config USB_LPC32XX config USB_ATMEL_USBA tristate "Atmel USBA" - depends on AVR32 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 + depends on AVR32 || ARCH_AT91 help USBA is the integrated high-speed USB Device controller on the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel.
drivers/usb/gadget/atmel_usba_udc.c +161 -59
304 lines not on this page · raw message
drivers/usb/gadget/atmel_usba_udc.h +1 -0
@@ -317,6 +317,7 @@ struct usba_udc {int irq;int vbus_pin;int vbus_pin_inverted; +int num_ep;struct clk *pclk;struct clk *hclk;struct usba_ep *usba_ep;
Signature · 1 line
1.7.10.4
PATCH 3/7 USB: gadget: atmel_usba: add DT support
Quoted 5 lines · Jean-Christophe PLAGNIOL-VILLARD
Allow to compile the driver all the time if AT91 enabled.
Signed-off-by Jean-Christophe PLAGNIOL-VILLARD <[email protected]>Cc Nicolas Ferre <[email protected]>Cc linux-usb at vger.kernel.org
Signature · 8 lines
balbi -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130523/570679ff/attachment.sig>
PATCH v4 4/7 ARM: at91: sam9x5 add udc DT support
In reply to Jean-Christophe PLAGNIOL-VILLARD--- arch/arm/boot/dts/at91sam9x5.dtsi | 62 +++++++++++++++++++++++++++++++++++++ arch/arm/mach-at91/at91sam9x5.c | 2 ++ 2 files changed, 64 insertions(+)
arch/arm/boot/dts/at91sam9x5.dtsi +62 -0
@@ -645,6 +645,68 @@ status = "disabled"; }; + usb2: gadget at f803c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91sam9rl-udc"; + reg = <0x00500000 0x80000 + 0xf803c000 0x400>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>; + status = "disabled"; + + ep0 { + reg = <0>; + atmel,fifo-size = <64>; + atmel,nb-banks = <1>; + }; + + ep1 { + reg = <1>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep2 { + reg = <2>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep3 { + reg = <3>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + }; + + ep4 { + reg = <4>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + }; + + ep5 { + reg = <5>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep6 { + reg = <6>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + atmel,can-isoc; + }; + }; + rtc at fffffeb0 { compatible = "atmel,at91rm9200-rtc"; reg = <0xfffffeb0 0x40>;
arch/arm/mach-at91/at91sam9x5.c +2 -0
@@ -249,6 +249,8 @@ static struct clk_lookup periph_clocks_lookups[] = {CLKDEV_CON_DEV_ID ("hclk" ,"600000.ohci" , &uhphs_clk),CLKDEV_CON_DEV_ID ("ohci_clk" ,"600000.ohci" , &uhphs_clk),CLKDEV_CON_DEV_ID ("ehci_clk" ,"700000.ehci" , &uhphs_clk), +CLKDEV_CON_DEV_ID ("hclk" ,"500000.gadget" , &utmi_clk), + CLKDEV_CON_DEV_ID("pclk", "500000.gadget", &udphs_clk), };/*
Signature · 1 line
1.7.10.4
PATCH v4 5/7 ARM: at91: sam9x5ek add udc DT support
In reply to Jean-Christophe PLAGNIOL-VILLARD--- arch/arm/boot/dts/at91sam9x5ek.dtsi | 5 +++++ 1 file changed, 5 insertions(+)
arch/arm/boot/dts/at91sam9x5ek.dtsi +5 -0
@@ -52,6 +52,11 @@ status = "okay"; }; + usb2: gadget at f803c000 { + atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + i2c0: i2c at f8010000 { status = "okay"; };
Signature · 1 line
1.7.10.4
PATCH v4 6/7 ARM: at91: sam9g45 add udc DT support
In reply to Jean-Christophe PLAGNIOL-VILLARD--- arch/arm/boot/dts/at91sam9g45.dtsi | 62 ++++++++++++++++++++++++++++++++++++ arch/arm/mach-at91/at91sam9g45.c | 2 ++ 2 files changed, 64 insertions(+)
arch/arm/boot/dts/at91sam9g45.dtsi +62 -0
@@ -582,6 +582,68 @@ pinctrl-0 = <&pinctrl_spi1>; status = "disabled"; }; + + usb2: gadget at fff78000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91sam9rl-udc"; + reg = <0x00600000 0x80000 + 0xfff78000 0x400>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>; + status = "disabled"; + + ep0 { + reg = <0>; + atmel,fifo-size = <64>; + atmel,nb-banks = <1>; + }; + + ep1 { + reg = <1>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep2 { + reg = <2>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep3 { + reg = <3>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + }; + + ep4 { + reg = <4>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + }; + + ep5 { + reg = <5>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep6 { + reg = <6>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + atmel,can-isoc; + }; + }; }; nand0: nand at 40000000 {
arch/arm/mach-at91/at91sam9g45.c +2 -0
@@ -266,6 +266,8 @@ static struct clk_lookup periph_clocks_lookups[] = {CLKDEV_CON_DEV_ID (NULL ,"fff88000.i2c" , &twi1_clk),CLKDEV_CON_DEV_ID ("spi_clk" ,"fffa4000.spi" , &spi0_clk),CLKDEV_CON_DEV_ID ("spi_clk" ,"fffa8000.spi" , &spi1_clk), +CLKDEV_CON_DEV_ID ("hclk" ,"600000.gadget" , &utmi_clk), +CLKDEV_CON_DEV_ID ("pclk" ,"600000.gadget" , &udphs_clk),/* fake hclk clock */ CLKDEV_CON_DEV_ID ("hclk" ,"at91_ohci" , &uhphs_clk), CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk),
Signature · 1 line
1.7.10.4
PATCH v4 7/7 ARM: at91: sam9m10g45ek add udc DT support
In reply to Jean-Christophe PLAGNIOL-VILLARD--- arch/arm/boot/dts/at91sam9m10g45ek.dts | 5 +++++ 1 file changed, 5 insertions(+)
arch/arm/boot/dts/at91sam9m10g45ek.dts +5 -0
@@ -112,6 +112,11 @@ reg = <0>; }; }; + + usb2: gadget at fff78000 { + atmel,vbus-gpio = <&pioB 19 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; }; nand0: nand at 40000000 {
Signature · 1 line
1.7.10.4
PATCH 1/7 USB: gadget: atmel_usba: move global struct usba_ep usba_ep to struct usba_udc
In reply to Jean-Christophe PLAGNIOL-VILLARDHi J,
Quoted 5 lines · Jean-Christophe PLAGNIOL-VILLARD
so we can have multiple usb gadget instance
Signed-off-by Jean-Christophe PLAGNIOL-VILLARD <[email protected]>Cc Nicolas Ferre <[email protected]>Cc linux-usb at vger.kernel.org
For this series, test OK on at91sam9m10g45ek and at91sam9x5ek board
PS: When do testing, we need build in or choose as module: "Device Drivers ---> Generic Target Core Mod (TCM) and ConfigFS infrastructure"
Best Regards,
Bo Shen
PATCH 1/7 USB: gadget: atmel_usba: move global struct usba_ep usba_ep to struct usba_udc
On 23/05/2013 04:23, Bo Shen :
Quoted 11 lines
Hi J,
Quoted 5 lines · Jean-Christophe PLAGNIOL-VILLARD
so we can have multiple usb gadget instance
Signed-off-by Jean-Christophe PLAGNIOL-VILLARD <[email protected]>Cc Nicolas Ferre <[email protected]>Cc linux-usb at vger.kernel.orgFor this series, test OK on at91sam9m10g45ek and at91sam9x5ek board
Tested-by Bo Shen <[email protected]>
After reading this v4 series, it seems good. So, on the whole series:
Quoted 2 lines
PS: When do testing, we need build in or choose as module: "Device Drivers ---> Generic Target Core Mod (TCM) and ConfigFS infrastructure"
Thanks a lot to you, Bo and Jean-Christophe.
Bye,
Signature · 1 line
Nicolas Ferre
PATCH 1/7 USB: gadget: atmel_usba: move global struct usba_ep usba_ep to struct usba_udc
In reply to Jean-Christophe PLAGNIOL-VILLARDQuoted 5 lines · Jean-Christophe PLAGNIOL-VILLARD
so we can have multiple usb gadget instance
Signed-off-by Jean-Christophe PLAGNIOL-VILLARD <[email protected]>Cc Nicolas Ferre <[email protected]>Cc linux-usb at vger.kernel.org
Signature · 8 lines
balbi -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130523/ae696055/attachment.sig>
v4 cover ARM: at91: dt: add USBA support
In reply to Jean-Christophe PLAGNIOL-VILLARDHi Felipe,
if it's ok with you I send the patch series via at91 with the DT
Best Regards,
J.
Quoted 51 lines · Jean-Christophe PLAGNIOL-VILLARD
HI,
v4:
fix multi instance supportv3:
rebase againt 3.10-rc1 + dt macro cleanupThis patch serie finish to add the usb device support to dt for at91 with the usba support present on the last at91 generation since sam9g45
The following changes since commit
b3f442b0eedbc20b5ce3f4a96530588d14901199:ARM: at91: udpate defconfigs (2013-05-17 15:05:08 +0200)
are available in the git repository at:
git://github.com/at91linux/linux-at91.gitj/for-3.11-usbafor you to fetch changes up to
910026a08e2c2205953f2507cc11f4822998989b:ARM: at91: sam9m10g45ek add udc DT support (2013-05-20 23:52:17 +0800)
----------------------------------------------------------------
Jean-Christophe PLAGNIOL-VILLARD (7):
USB: gadget:atmel_usba: move global structusba_epusba_epto structusba_udc
USB: gadget:atmel_usba: allow multi instance
USB: gadget:atmel_usba: add DT support
ARM: at91: sam9x5 add udc DT support
ARM: at91: sam9x5ek add udc DT support
ARM: at91: sam9g45 add udc DT support
ARM: at91: sam9m10g45ek add udc DT supportDocumentation/devicetree/bindings/usb/atmel-usb.txt | 82 ++++++++++++++++++++++++++++++ arch/arm/boot/dts/at91sam9g45.dtsi | 62 +++++++++++++++++++++++ arch/arm/boot/dts/at91sam9m10g45ek.dts | 5 ++ arch/arm/boot/dts/at91sam9x5.dtsi | 62 +++++++++++++++++++++++ arch/arm/boot/dts/at91sam9x5ek.dtsi | 5 ++ arch/arm/mach-at91/at91sam9g45.c | 2 + arch/arm/mach-at91/at91sam9x5.c | 2 + drivers/usb/gadget/Kconfig | 2 +- drivers/usb/gadget/atmel_usba_udc.c | 264 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----------------------------- drivers/usb/gadget/atmel_usba_udc.h | 2 + 10 files changed, 407 insertions(+), 81 deletions(-)Best Regards,
J.
_______________________________________________
devicetree-discuss mailing list
devicetree-discuss at lists.ozlabs.org
https://lists.ozlabs.org/listinfo/devicetree-discuss