ARM: dts: omap4-panda: Update the twl6040 gpio to macro definition
PATCH 1/1 ARM: dts: omap4-panda: Update the twl6040 gpio to macro definition
Update the dt property ti,audpwron-gpio to use the gpio macro definition for GPIO_ACTIVE_HIGH.
Signed-off-by Dan Murphy <[email protected]>
--- arch/arm/boot/dts/omap4-panda-common.dtsi | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
arch/arm/boot/dts/omap4-panda-common.dtsi +1 -1
@@ -190,7 +190,7 @@ /* IRQ# = 119 */ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */ interrupt-parent = <&gic>; - ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */ + ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio line 127 */ vio-supply = <&v1v8>; v2v1-supply = <&v2v1>;
Signature · 1 line
1.7.5.4
Hello Dan,
Quoted 14 lines · Dan Murphy
Update the dt property ti,audpwron-gpio to use the gpio macro definition for
GPIO_ACTIVE_HIGH.Signed-off-by Dan Murphy <[email protected]>--- arch/arm/boot/dts/omap4-panda-common.dtsi | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)arch/arm/boot/dts/omap4-panda-common.dtsi +0
-0
arch/arm/boot/dts/omap4-panda-common.dtsi line 196
Quoted 8 lines
arch/arm/boot/dts/omap4-panda-common.dtsi +1
-1@@ -190,7 +190,7 @@ /* IRQ# = 119 */ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */ interrupt-parent = <&gic>; - ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */ + ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio line 127 */ vio-supply = <&v1v8>; v2v1-supply = <&v2v1>;
I missed it during the conversion, thank you.
Reviewed-by Florian Vaussard <[email protected]>
Hi Dan,
Quoted 25 lines · Florian Vaussard
Hello Dan,
Quoted 22 lines · Dan Murphy
Update the dt property ti,audpwron-gpio to use the gpio macro definition for
GPIO_ACTIVE_HIGH.Signed-off-by Dan Murphy <[email protected]>--- arch/arm/boot/dts/omap4-panda-common.dtsi | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)arch/arm/boot/dts/omap4-panda-common.dtsi +0
-0@@ -190,7 +190,7 @@ /* IRQ# = 119 */ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /*
IRQ_SYS_2Ncascaded to gic */interrupt-parent = <&gic>;arch/arm/boot/dts/omap4-panda-common.dtsi +1
-1- ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */ + ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpioline 127 */
Quoted 7 lines
Quoted 3 lines
vio-supply = <&v1v8>; v2v1-supply = <&v2v1>;I missed it during the conversion, thank you.
Reviewed-by Florian Vaussard <[email protected]>
I've just applied it with Florian's Reviewed-by.
Thanks,
Benoit