hw/arm: add initial support for Canon DIGIC SoC
v4 cover hw/arm: add initial support for Canon DIGIC SoC
[RFC v4 1/5] hw/arm: add very initial support for Canon DIGIC SoC [RFC v4 2/5] hw/arm/digic: prepare DIGIC-based boards support [RFC v4 3/5] hw/arm/digic: add timer support
[RFC v4 4/5] hw/arm/digic: add UART support
[RFC v4 5/5] hw/arm/digic: add NOR ROM support
Changes since v3:
1. fix typos and formatting
2. digic-timer: drop DPRINTF
3. digic-timer: fix DIGIC4_TIMER_BASE() macro
4. digic.c: fix max timer device string
Changes since v2:
1. rebase over latest master;
* pass available size to object_initialize().
2. digic-uart: qemu_log: use LOG_UNIMP instead LOG_GUEST_ERROR;
3. digic-boards: update rom image load code: introduce digic_load_rom().
Changes since v1:
0. drop the "add ARM946E-S CPU" patch;
1. convert to QOM, split DIGIC SoC code and board code
(thanks to Andreas Fa:rber, Peter Maydell and Peter Crosthwaite);
2. fix digic-uart (many thanks to Peter Crosthwaite
for his comments); 3. digic-boards: digic4_add_k8p3215uqb_rom(): update rom image load code: use the '-bios' option.
DIGIC is Canon Inc.'s name for a family of SoC
for digital cameras and camcorders.
See http://en.wikipedia.org/wiki/DIGIC for details.
There is no publicly available specification for DIGIC chips. All information about DIGIC chip internals is based on reverse engineering efforts made by CHDK (http://chdk.wikia.com) and Magic Lantern (http://www.magiclantern.fm) projects contributors.
Also this patch series adds initial support for Canon PowerShot A1100 IS compact camera (it is my only camera with connected UART interface). As the DIGIC-based cameras differences mostly are unsignificant (e.g. RAM-size, ROM type and size, GPIO usage) the other compact and DSLR cameras support can be easely added.
This DIGIC support patch series is inspired
by EOS QEMU from Magic Lantern project.
The main differences:
* EOS QEMU uses home-brew all-in-one monolith design; this patch series uses conventional qemu object-centric design;
* EOS QEMU tries provide simplest emulation for most controllers inside SoC to run Magic Lantern firmware; this patch series provide more complete support
only for core devices to run barebox bootloader.
** EOS QEMU does not support timer counting
(this patch series emulate 1 MHz counting);
** EOS QEMU support DIGIC UART only for output character to stderr; (this patch series emulate introduces full blown UART interface);
** EOS QEMU has incomplete ROM support;
(this patch series uses conventional qemu pflash).
This initial DIGIC support can't be used to run the original camera firmware, but it can successfully run experimental version of barebox bootloader (see http://www.barebox.org).
The last sources of barebox for PowerShot A1100 can be obtained here:
https://github.com/frantony/barebox/tree/next.digic.20130829
The precompiled ROM image usable with qemu can be
obtained here:
https://github.com/frantony/barebox/blob/next.digic.20130829/canon-a1100-rom1.bin
This ROM image (after "dancing bit" encoding) can be run on real Canon A1100 camera.
The short build instruction for __previous__ DIGIC barebox version (it can be used with more recent sources too) can be obtained here:
http://lists.infradead.org/pipermail/barebox/2013-August/016007.html
RFC v4 1/5 hw/arm: add very initial support for Canon DIGIC SoC
DIGIC is Canon Inc.'s name for a family of SoC
for digital cameras and camcorders.
There is no publicly available specification for DIGIC chips. All information about DIGIC chip internals is based on reverse engineering efforts made by CHDK (http://chdk.wikia.com) and Magic Lantern (http://www.magiclantern.fm) projects contributors.
--- default-configs/arm-softmmu.mak | 1 + hw/arm/Makefile.objs | 2 +- hw/arm/digic.c | 70 +++++++++++++++++++++++++++++++++++++++++ include/hw/arm/digic.h | 23 ++++++++++++++ 4 files changed, 95 insertions(+), 1 deletion(-) create mode 100644 hw/arm/digic.c create mode 100644 include/hw/arm/digic.h
default-configs/arm-softmmu.mak +1 -0
@@ -63,6 +63,7 @@ CONFIG_FRAMEBUFFER=y CONFIG_XILINX_SPIPS=y CONFIG_A9SCU=y +CONFIG_DIGIC=y CONFIG_MARVELL_88W8618=y CONFIG_OMAP=y CONFIG_TSC210X=y
hw/arm/Makefile.objs +1 -1
@@ -3,5 +3,5 @@ obj-y += integratorcp.o kzm.o mainstone.o musicpal.o nseries.o obj-y += omap_sx1.o palm.o realview.o spitz.o stellaris.o obj-y += tosa.o versatilepb.o vexpress.o xilinx_zynq.o z2.o -obj-y += armv7m.o exynos4210.o pxa2xx.o pxa2xx_gpio.o pxa2xx_pic.o +obj-y += armv7m.o digic.o exynos4210.o pxa2xx.o pxa2xx_gpio.o pxa2xx_pic.o obj-y += omap1.o omap2.o strongarm.o
hw/arm/digic.c new file +70 -0
70 lines not on this page · raw message
include/hw/arm/digic.h new file +23 -0
@@ -0,0 +1,23 @@ +/* +* Misc DIGIC declarations +* +* Copyright (C) 2013 Antony Pavlov <[email protected]> +* +*/ + +#ifndef __DIGIC_H__ +#define __DIGIC_H__ + +#include "cpu-qom.h" + +#define TYPE_DIGIC "digic" + +#define DIGIC (obj) OBJECT_CHECK(DigicState, (obj), TYPE_DIGIC) + +typedef struct DigicState { +Object parent_obj; + +ARMCPU cpu; +}DigicState ; + +#endif /* __DIGIC_H__ */
Signature · 1 line
1.8.4.rc3
Re: [Qemu-devel] [RFC v4 1/5] hw/arm: add very initial support for Canon DIGIC SoC
Am 05.09.2013 09:52, schrieb Antony Pavlov:
Quoted 37 lines
DIGIC is Canon Inc.'s name for a family of SoC
for digital cameras and camcorders.There is no publicly available specification for DIGIC chips. All information about DIGIC chip internals is based on reverse engineering efforts made by CHDK (http://chdk.wikia.com) and Magic Lantern (http://www.magiclantern.fm) projects contributors.
Signed-off-by Antony Pavlov <[email protected]>--- default-configs/arm-softmmu.mak | 1 + hw/arm/Makefile.objs | 2 +- hw/arm/digic.c | 70 +++++++++++++++++++++++++++++++++++++++++ include/hw/arm/digic.h | 23 ++++++++++++++ 4 files changed, 95 insertions(+), 1 deletion(-) create mode 100644 hw/arm/digic.c create mode 100644 include/hw/arm/digic.hdefault-configs/arm-softmmu.mak +1
-0@@ -63,6 +63,7 @@ CONFIG_FRAMEBUFFER=y CONFIG_XILINX_SPIPS=y CONFIG_A9SCU=y +CONFIG_DIGIC=y CONFIG_MARVELL_88W8618=y CONFIG_OMAP=y CONFIG_TSC210X=yhw/arm/Makefile.objs +0
-0
hw/arm/Makefile.objs obj-y += integratorcp.o kzm.o mainstone.o musicpal.o nseries.o · line 6
Quoted 5 lines
hw/arm/Makefile.objs +1
-1@@ -3,5 +3,5 @@ obj-y += integratorcp.o kzm.o mainstone.o musicpal.o nseries.o obj-y += omap_sx1.o palm.o realview.o spitz.o stellaris.o obj-y += tosa.o versatilepb.o vexpress.o xilinx_zynq.o z2.o -obj-y += armv7m.o exynos4210.o pxa2xx.o pxa2xx_gpio.o pxa2xx_pic.o +obj-y += armv7m.o digic.o exynos4210.o pxa2xx.o pxa2xx_gpio.o pxa2xx_pic.o
Please place it on a line of its own, using
obj-$(CONFIG_DIGIC) += digic.o
Quoted 83 lines
hw/arm/Makefile.objs +0
-0obj-y += omap1.o omap2.o strongarm.ohw/arm/digic.c new file +70
-0@@ -0,0 +1,70 @@ +/* +* QEMU model of the Canon DIGIC SoC. +* +* Copyright (C) 2013 Antony Pavlov <[email protected]> +* +* This model is based on reverse engineering efforts +* made by CHDK (http://chdk.wikia.com) and +* Magic Lantern (http://www.magiclantern.fm) projects +* contributors. +* +* This library is free software; you can redistribute it and/or +* modify it under the terms of the GNU Lesser General Public +* License as published by the Free Software Foundation; either +* version 2 of the License, or (at your option) any later version. +* +* This library is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +* Lesser General Public License for more details. +* +* You should have received a copy of the GNU Lesser General Public +* License along with this library; if not, see <http://www.gnu.org/licenses/>. +* +*/ + +#include "hw/sysbus.h" +#include "target-arm/cpu-qom.h" +#include "hw/arm/digic.h" + +static void digic_init (Object *obj) +{ +DigicState *s =DIGIC (obj); + +object_initialize (&s->cpu,sizeof (s->cpu),"arm946-" TYPE_ARM_CPU ); +object_property_add_child (obj,"cpu" ,OBJECT (&s->cpu),NULL ); +} + +static void digic_realize (DeviceState *dev,Error **errp) +{ +DigicState *s =DIGIC (dev); +Error *err =NULL ; + +object_property_set_bool (OBJECT (&s->cpu), true,"realized" , &err); +if (err !=NULL ) { +error_propagate (errp, err); +return ; + } +} + +static void digic_class_init (ObjectClass *oc,void *data) +{ +DeviceClass *dc =DEVICE_CLASS (oc); + + dc->realize = digic_realize; +} + +static const TypeInfo digic_type_info = { + .name =TYPE_DIGIC , + .parent =TYPE_DEVICE , + .instance_size =sizeof (DigicState), + .instance_init = digic_init, + .class_init = digic_class_init, +}; + +static void digic_register_types (void ) +{ +type_register_static (&digic_type_info); +} + +type_init (digic_register_types)include/hw/arm/digic.h new file +0
-0
include/hw/arm/digic.h line 9
Quoted 9 lines
include/hw/arm/digic.h new file +9
-0@@ -0,0 +1,23 @@ +/* +* Misc DIGIC declarations +* +* Copyright (C) 2013 Antony Pavlov <[email protected]> +* +*/ + +#ifndef __DIGIC_H__ +#define __DIGIC_H__
Identifiers starting in underscore are reserved. Suggest DIGIC_H, HW_ARM_DIGIC_H, QEMU_DIGIC_H or something like that.
include/hw/arm/digic.h line 11
Quoted 2 lines
include/hw/arm/digic.h new file +2
-0+ +#include "cpu-qom.h"
This looks bogus, cpu-qom.h cannot be included on its own since it depends in CPUARMState in cpu.h these days.
include/hw/arm/digic.h line 17
Quoted 6 lines
include/hw/arm/digic.h new file +6
-0+ +#define TYPE_DIGIC "digic" + +#define DIGIC (obj) OBJECT_CHECK(DigicState, (obj), TYPE_DIGIC) + +typedef struct DigicState {
Please add
/*< private >*/
include/hw/arm/digic.h line 18
Quoted 1 line
include/hw/arm/digic.h new file +1
-0+Object parent_obj;
/*< private >*/
markers for documentation.
It needs to be DeviceState parent_obj though.
include/hw/arm/digic.h line 23
Quoted 5 lines
include/hw/arm/digic.h new file +5
-0+ + ARMCPU cpu; +} DigicState; + +#endif /* __DIGIC_H__ */
Otherwise looks good.
Regards,
Andreas
Signature · 2 lines
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
Re: [Qemu-devel] [RFC v4 1/5] hw/arm: add very initial support for Canon DIGIC SoC
Quoted 158 lines · On Thu, 05 Sep 2013 20:08:34 +0200 Andreas Färber <[email protected]> wrote:
Am 05.09.2013 09:52, schrieb Antony Pavlov:
Quoted 37 lines
DIGIC is Canon Inc.'s name for a family of SoC
for digital cameras and camcorders.There is no publicly available specification for DIGIC chips. All information about DIGIC chip internals is based on reverse engineering efforts made by CHDK (http://chdk.wikia.com) and Magic Lantern (http://www.magiclantern.fm) projects contributors.
Signed-off-by Antony Pavlov <[email protected]>--- default-configs/arm-softmmu.mak | 1 + hw/arm/Makefile.objs | 2 +- hw/arm/digic.c | 70 +++++++++++++++++++++++++++++++++++++++++ include/hw/arm/digic.h | 23 ++++++++++++++ 4 files changed, 95 insertions(+), 1 deletion(-) create mode 100644 hw/arm/digic.c create mode 100644 include/hw/arm/digic.hdefault-configs/arm-softmmu.mak +1
-0@@ -63,6 +63,7 @@ CONFIG_FRAMEBUFFER=y CONFIG_XILINX_SPIPS=y CONFIG_A9SCU=y +CONFIG_DIGIC=y CONFIG_MARVELL_88W8618=y CONFIG_OMAP=y CONFIG_TSC210X=yhw/arm/Makefile.objs +0
-0hw/arm/Makefile.objs obj-y += integratorcp.o kzm.o mainstone.o musicpal.o nseries.o · line 6
Quoted 5 lines
hw/arm/Makefile.objs +1
-1@@ -3,5 +3,5 @@ obj-y += integratorcp.o kzm.o mainstone.o musicpal.o nseries.o obj-y += omap_sx1.o palm.o realview.o spitz.o stellaris.o obj-y += tosa.o versatilepb.o vexpress.o xilinx_zynq.o z2.o -obj-y += armv7m.o exynos4210.o pxa2xx.o pxa2xx_gpio.o pxa2xx_pic.o +obj-y += armv7m.o digic.o exynos4210.o pxa2xx.o pxa2xx_gpio.o pxa2xx_pic.oPlease place it on a line of its own, using
obj-$(CONFIG_DIGIC) += digic.o
Quoted 83 lines
hw/arm/Makefile.objs +0
-0obj-y += omap1.o omap2.o strongarm.ohw/arm/digic.c new file +70
-0@@ -0,0 +1,70 @@ +/* +* QEMU model of the Canon DIGIC SoC. +* +* Copyright (C) 2013 Antony Pavlov <[email protected]> +* +* This model is based on reverse engineering efforts +* made by CHDK (http://chdk.wikia.com) and +* Magic Lantern (http://www.magiclantern.fm) projects +* contributors. +* +* This library is free software; you can redistribute it and/or +* modify it under the terms of the GNU Lesser General Public +* License as published by the Free Software Foundation; either +* version 2 of the License, or (at your option) any later version. +* +* This library is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +* Lesser General Public License for more details. +* +* You should have received a copy of the GNU Lesser General Public +* License along with this library; if not, see <http://www.gnu.org/licenses/>. +* +*/ + +#include "hw/sysbus.h" +#include "target-arm/cpu-qom.h" +#include "hw/arm/digic.h" + +static void digic_init (Object *obj) +{ +DigicState *s =DIGIC (obj); + +object_initialize (&s->cpu,sizeof (s->cpu),"arm946-" TYPE_ARM_CPU ); +object_property_add_child (obj,"cpu" ,OBJECT (&s->cpu),NULL ); +} + +static void digic_realize (DeviceState *dev,Error **errp) +{ +DigicState *s =DIGIC (dev); +Error *err =NULL ; + +object_property_set_bool (OBJECT (&s->cpu), true,"realized" , &err); +if (err !=NULL ) { +error_propagate (errp, err); +return ; + } +} + +static void digic_class_init (ObjectClass *oc,void *data) +{ +DeviceClass *dc =DEVICE_CLASS (oc); + + dc->realize = digic_realize; +} + +static const TypeInfo digic_type_info = { + .name =TYPE_DIGIC , + .parent =TYPE_DEVICE , + .instance_size =sizeof (DigicState), + .instance_init = digic_init, + .class_init = digic_class_init, +}; + +static void digic_register_types (void ) +{ +type_register_static (&digic_type_info); +} + +type_init (digic_register_types)include/hw/arm/digic.h new file +0
-0include/hw/arm/digic.h line 9
Quoted 9 lines
include/hw/arm/digic.h new file +9
-0@@ -0,0 +1,23 @@ +/* +* Misc DIGIC declarations +* +* Copyright (C) 2013 Antony Pavlov <[email protected]> +* +*/ + +#ifndef __DIGIC_H__ +#define __DIGIC_H__Identifiers starting in underscore are reserved. Suggest
DIGIC_H,HW_ARM_DIGIC_H,QEMU_DIGIC_Hor something like that.include/hw/arm/digic.h line 11
Quoted 2 lines
include/hw/arm/digic.h new file +2
-0+ +#include "cpu-qom.h" This looks bogus,
cpu-qom.hcannot be included on its own since it depends in CPUARMState incpu.hthese days.include/hw/arm/digic.h line 17
Quoted 6 lines
include/hw/arm/digic.h new file +6
-0+ +#define TYPE_DIGIC "digic" + +#define DIGIC (obj) OBJECT_CHECK(DigicState, (obj), TYPE_DIGIC) + +typedef struct DigicState {Please add
Quoted 5 lines
/*< private >*/include/hw/arm/digic.h line 18
Quoted 1 line
include/hw/arm/digic.h new file +1
-0+Object parent_obj;/*< private >*/
/*< public >*/ ?
Quoted 4 lines
markers for documentation.
It needs to be DeviceState
parent_objthough.
In your tegra2 support 'Object parent_obj' is used in a similar situation.
http://repo.or.cz/w/qemu/afaerber.git/blob/refs/heads/tegra:/include/hw/arm/tegra2.h#l42
Quoted 7 lines
include/hw/arm/digic.h line 23
Quoted 5 lines
include/hw/arm/digic.h new file +5
-0+ + ARMCPU cpu; +} DigicState; + +#endif /* __DIGIC_H__ */ Otherwise looks good.
--
Best regards,
Antony Pavlov
Re: [Qemu-devel] [RFC v4 1/5] hw/arm: add very initial support for Canon DIGIC SoC
Am 05.09.2013 23:23, schrieb Antony Pavlov:
Quoted 8 lines
Quoted 6 lines · On Thu, 05 Sep 2013 20:08:34 +0200 Andreas Färber <[email protected]> wrote:
Am 05.09.2013 09:52, schrieb Antony Pavlov:
Quoted 5 lines
hw/arm/digic.c new file +0
-0
[...]
Quoted 19 lines
Quoted 19 lines
Quoted 19 lines
hw/arm/digic.c new file +14
-0+static const TypeInfo digic_type_info = { + .name =TYPE_DIGIC , + .parent =TYPE_DEVICE , + .instance_size =sizeof (DigicState), + .instance_init = digic_init, + .class_init = digic_class_init, +}; + +static void digic_register_types (void ) +{ +type_register_static (&digic_type_info); +} + +type_init (digic_register_types)include/hw/arm/digic.h new file +0
-0
[...]
Quoted 10 lines
Quoted 8 lines
Quoted 1 line
+typedef struct DigicState {
Please add
/*< private >*/Quoted 1 line
+ Object
parent_obj;/*< private >*//*< public >*/ ?
Yes, sorry, copy&paste and then noticing Object. ;)
Or just leave the latter out so that all fields are undocumented.
Quoted 7 lines
Quoted 3 lines
markers for documentation.
It needs to be DeviceState
parent_objthough.In your tegra2 support 'Object
parent_obj' is used in a similar situation.http://repo.or.cz/w/qemu/afaerber.git/blob/refs/heads/tegra:/include/hw/arm/tegra2.h#l42
Thanks for spotting, fixed. (It used to be derived from TYPE_OBJECT, but we decided to provide QOM realize support only for devices.)
Unfortunately Tegra kernel is still stuck after USB init either way...
Cheers,
Andreas
Signature · 2 lines
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
Re: [Qemu-devel] [RFC v4 1/5] hw/arm: add very initial support for Canon DIGIC SoC
Quoted 35 lines · On Thu, 05 Sep 2013 23:38:26 +0200 Andreas Färber <[email protected]> wrote:
Am 05.09.2013 23:23, schrieb Antony Pavlov:
Quoted 8 lines
Quoted 6 lines · On Thu, 05 Sep 2013 20:08:34 +0200 Andreas Färber <[email protected]> wrote:
Am 05.09.2013 09:52, schrieb Antony Pavlov:
Quoted 5 lines
hw/arm/digic.c new file +0
-0[...]
Quoted 19 lines
Quoted 19 lines
Quoted 19 lines
hw/arm/digic.c new file +14
-0+static const TypeInfo digic_type_info = { + .name =TYPE_DIGIC , + .parent =TYPE_DEVICE , + .instance_size =sizeof (DigicState), + .instance_init = digic_init, + .class_init = digic_class_init, +}; + +static void digic_register_types (void ) +{ +type_register_static (&digic_type_info); +} + +type_init (digic_register_types)include/hw/arm/digic.h new file +0
-0[...]
Quoted 5 lines
Quoted 5 lines
Quoted 1 line
+typedef struct DigicState {
Please add
/*< private >*/
Quoted 8 lines
Quoted 5 lines
Quoted 3 lines
Quoted 1 line
+ Object
parent_obj;/*< private >*//*< public >*/ ?
Yes, sorry, copy&paste and then noticing Object. ;)
Or just leave the latter out so that all fields are undocumented.
I have grepped the qemu code and found that the "private" and "public" labels usage is:
=== quote start ===
typedef struct SomethingState {
/*< private >*/
DeviceState parent_obj;
/*< public >*/
some_type public_field1;=== quote end ===
Is there any intention in empty line after the "public" label and no empty line befor it? Can I wrote something like this:
=== quote start ===
typedef struct SomethingState {
/*< private >*/
DeviceState parent_obj;
/*< public >*/
some_type public_field1;=== quote end ===
?
Quoted 19 lines
Quoted 7 lines
Quoted 3 lines
markers for documentation.
It needs to be DeviceState
parent_objthough.In your tegra2 support 'Object
parent_obj' is used in a similar situation.http://repo.or.cz/w/qemu/afaerber.git/blob/refs/heads/tegra:/include/hw/arm/tegra2.h#l42
Thanks for spotting, fixed. (It used to be derived from
TYPE_OBJECT, but we decided to provide QOM realize support only for devices.)Unfortunately Tegra kernel is still stuck after USB init either way...
Cheers,
AndreasSignature · 2 lines
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
Signature · 3 lines
-- Best regards, Antony Pavlov
RFC v4 2/5 hw/arm/digic: prepare DIGIC-based boards support
In reply to Antony PavlovAlso this patch adds initial support for Canon
PowerShot A1100 IS compact camera.
--- hw/arm/Makefile.objs | 2 +- hw/arm/digic_boards.c | 63 +++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 64 insertions(+), 1 deletion(-) create mode 100644 hw/arm/digic_boards.c
hw/arm/Makefile.objs +1 -1
@@ -1,4 +1,4 @@ -obj-y += boot.o collie.o exynos4_boards.o gumstix.o highbank.o +obj-y += boot.o collie.o digic_boards.o exynos4_boards.o gumstix.o highbank.o obj-y += integratorcp.o kzm.o mainstone.o musicpal.o nseries.o obj-y += omap_sx1.o palm.o realview.o spitz.o stellaris.o obj-y += tosa.o versatilepb.o vexpress.o xilinx_zynq.o z2.o
hw/arm/digic_boards.c new file +63 -0
63 lines not on this page · raw message
Signature · 1 line
1.8.4.rc3
Re: [Qemu-devel] [RFC v4 2/5] hw/arm/digic: prepare DIGIC-based boards support
hw/arm/digic_boards.c
Quoted 26 lines · Antony Pavlov
Also this patch adds initial support for Canon
PowerShot A1100 IS compact camera.Signed-off-by Antony Pavlov <[email protected]>--- hw/arm/Makefile.objs | 2 +- hw/arm/digic_boards.c | 63 +++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 64 insertions(+), 1 deletion(-) create mode 100644 hw/arm/digic_boards.chw/arm/Makefile.objs +1
-1@@ -1,4 +1,4 @@ -obj-y += boot.o collie.o exynos4_boards.o gumstix.o highbank.o +obj-y += boot.o collie.o digic_boards.o exynos4_boards.o gumstix.o highbank.o obj-y += integratorcp.o kzm.o mainstone.o musicpal.o nseries.o obj-y += omap_sx1.o palm.o realview.o spitz.o stellaris.o obj-y += tosa.o versatilepb.o vexpress.o xilinx_zynq.o z2.ohw/arm/digic_boards.c new file +0
-0@@ -0,0 +1,63 @@
Copyright and license summary comment at the top of the file, please.
Quoted 28 lines
hw/arm/digic_boards.c new file +28
-0+#include "hw/boards.h" +#include "exec/address-spaces.h" +#include "hw/arm/digic.h" + +typedef struct DigicBoardState { +DigicState *digic; +MemoryRegion ram; +}DigicBoardState ; + +typedef struct DigicBoard { +hwaddr ram_size; +hwaddr start_addr; +}DigicBoard ; + +static void digic4_board_setup_ram (DigicBoardState *s,hwaddr ram_size) +{ +memory_region_init_ram (&s->ram,NULL ,"ram" , ram_size); +memory_region_add_subregion (get_system_memory (),0 , &s->ram); +vmstate_register_ram_global (&s->ram); +} + +static void digic4_board_init (DigicBoard *board) +{ +Error *err =NULL ; + +DigicBoardState *s =g_new (DigicBoardState,1 ); + + s->digic =DIGIC (object_new (TYPE_DIGIC ));
hw/arm/digic_boards.c line 38
Quoted 10 lines
hw/arm/digic_boards.c new file +10
-0+object_property_set_bool (OBJECT (s->digic), true,"realized" , &err); +if (err !=NULL ) { +fprintf (stderr,"Couldn't realize DIGIC SoC: %s\n" , +error_get_pretty (err)); +exit (1 ); + } + +digic4_board_setup_ram (s, board->ram_size); + + s->digic->cpu.env.regs[15 ] = board->start_addr;
This is odd. What happens on real hardware? Is
the firmware actually at zero?
Quoted 27 lines
hw/arm/digic_boards.c new file +25
-1+} + +static DigicBoard digic4_board_canon_a1100 = { + .ram_size =64 *1024 *1024 , +/* CHDK recommends this address for ROM disassembly */ + .start_addr =0xffc00000 , +}; + +static void canon_a1100_init (QEMUMachineInitArgs *args) +{ +digic4_board_init (&digic4_board_canon_a1100); +} + +static QEMUMachine canon_a1100 = { + .name ="canon-a1100" , + .desc ="Canon PowerShot A1100 IS" , + .init = &canon_a1100_init, +}; + +static void digic_register_machines (void ) +{ +qemu_register_machine (&canon_a1100); +} + +machine_init (digic_register_machines) --1.8.4.rc3
Re: [Qemu-devel] [RFC v4 2/5] hw/arm/digic: prepare DIGIC-based boards support
Quoted 64 lines · On Thu, 5 Sep 2013 18:54:30 +0100 Peter Maydell <[email protected]>…
hw/arm/digic_boards.c
Quoted 26 lines · Antony Pavlov
Also this patch adds initial support for Canon
PowerShot A1100 IS compact camera.Signed-off-by Antony Pavlov <[email protected]>--- hw/arm/Makefile.objs | 2 +- hw/arm/digic_boards.c | 63 +++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 64 insertions(+), 1 deletion(-) create mode 100644 hw/arm/digic_boards.chw/arm/Makefile.objs +1
-1@@ -1,4 +1,4 @@ -obj-y += boot.o collie.o exynos4_boards.o gumstix.o highbank.o +obj-y += boot.o collie.o digic_boards.o exynos4_boards.o gumstix.o highbank.o obj-y += integratorcp.o kzm.o mainstone.o musicpal.o nseries.o obj-y += omap_sx1.o palm.o realview.o spitz.o stellaris.o obj-y += tosa.o versatilepb.o vexpress.o xilinx_zynq.o z2.ohw/arm/digic_boards.c new file +0
-0@@ -0,0 +1,63 @@Copyright and license summary comment at the top of the file, please.
Quoted 33 lines
hw/arm/digic_boards.c new file +33
-0+#include "hw/boards.h" +#include "exec/address-spaces.h" +#include "hw/arm/digic.h" + +typedef struct DigicBoardState { +DigicState *digic; +MemoryRegion ram; +}DigicBoardState ; + +typedef struct DigicBoard { +hwaddr ram_size; +hwaddr start_addr; +}DigicBoard ; + +static void digic4_board_setup_ram (DigicBoardState *s,hwaddr ram_size) +{ +memory_region_init_ram (&s->ram,NULL ,"ram" , ram_size); +memory_region_add_subregion (get_system_memory (),0 , &s->ram); +vmstate_register_ram_global (&s->ram); +} + +static void digic4_board_init (DigicBoard *board) +{ +Error *err =NULL ; + +DigicBoardState *s =g_new (DigicBoardState,1 ); + + s->digic =DIGIC (object_new (TYPE_DIGIC )); +object_property_set_bool (OBJECT (s->digic), true,"realized" , &err); +if (err !=NULL ) { +fprintf (stderr,"Couldn't realize DIGIC SoC: %s\n" , +error_get_pretty (err)); +exit (1 );
Quoted 8 lines
hw/arm/digic_boards.c line 38
Quoted 5 lines
hw/arm/digic_boards.c new file +5
-0+ } + +digic4_board_setup_ram (s, board->ram_size); + + s->digic->cpu.env.regs[15 ] = board->start_addr;This is odd. What happens on real hardware? Is
the firmware actually at zero?
There is no public documentation on Digic chips.
Only Canon's engineers know something about real Digic's bootprocess.
Nowadays Canon produce two families of photocameras:
* relatevely cheap Point-and-Shot cameras (PowerShot series);
* more expensive cameras with exchangeable lens (EOS series).
The DIGIC chips has two regions for NOR ROM mapping.
The PowerShot cameras (as rule) have simple firmware and use only one ROM region. The EOS cameras have more complex firmware and use both ROM regions. So the board->start_addr parameter is used just for selection of ROM region.
Quoted 27 lines
Quoted 27 lines
hw/arm/digic_boards.c new file +25
-1+} + +static DigicBoard digic4_board_canon_a1100 = { + .ram_size =64 *1024 *1024 , +/* CHDK recommends this address for ROM disassembly */ + .start_addr =0xffc00000 , +}; + +static void canon_a1100_init (QEMUMachineInitArgs *args) +{ +digic4_board_init (&digic4_board_canon_a1100); +} + +static QEMUMachine canon_a1100 = { + .name ="canon-a1100" , + .desc ="Canon PowerShot A1100 IS" , + .init = &canon_a1100_init, +}; + +static void digic_register_machines (void ) +{ +qemu_register_machine (&canon_a1100); +} + +machine_init (digic_register_machines) --1.8.4.rc3
Signature · 3 lines
-- Best regards, Antony Pavlov
RFC v4 3/5 hw/arm/digic: add timer support
In reply to Antony Pavlov--- hw/arm/digic.c | 26 +++++++++++ hw/timer/Makefile.objs | 1 + hw/timer/digic-timer.c | 117 +++++++++++++++++++++++++++++++++++++++++++++++++ hw/timer/digic-timer.h | 19 ++++++++ include/hw/arm/digic.h | 7 +++ 5 files changed, 170 insertions(+) create mode 100644 hw/timer/digic-timer.c create mode 100644 hw/timer/digic-timer.h
hw/arm/digic.c +26 -0
@@ -30,21 +30,47 @@static void digic_init (Object *obj) {DigicState *s =DIGIC (obj); +DeviceState *dev; +int i;object_initialize (&s->cpu,sizeof (s->cpu),"arm946-" TYPE_ARM_CPU );object_property_add_child (obj,"cpu" ,OBJECT (&s->cpu),NULL ); + +for (i =0 ; i <DIGIC4_NB_TIMERS ; i++) { +#define DIGIC_TIMER_NAME_MLEN 11 +char name[DIGIC_TIMER_NAME_MLEN ]; + +object_initialize (&s->timer[i],sizeof (s->timer[i]),TYPE_DIGIC_TIMER ); + dev =DEVICE (&s->timer[i]); +qdev_set_parent_bus (dev,sysbus_get_default ()); +snprintf (name,DIGIC_TIMER_NAME_MLEN ,"timer[%d]" , i); +object_property_add_child (obj, name,OBJECT (&s->timer[i]),NULL ); + } }static void digic_realize (DeviceState *dev,Error **errp) {DigicState *s =DIGIC (dev);Error *err =NULL ; +SysBusDevice *sbd; +int i;object_property_set_bool (OBJECT (&s->cpu), true,"realized" , &err);if (err !=NULL ) {error_propagate (errp, err);return ; } + +for (i =0 ; i <DIGIC4_NB_TIMERS ; i++) { +object_property_set_bool (OBJECT (&s->timer[i]), true,"realized" , &err); +if (err !=NULL ) { +error_propagate (errp, err); +return ; + } + + sbd =SYS_BUS_DEVICE (&s->timer[i]); +sysbus_mmio_map (sbd,0 ,DIGIC4_TIMER_BASE (i)); + } }static void digic_class_init (ObjectClass *oc,void *data)
hw/timer/Makefile.objs +1 -0
@@ -25,5 +25,6 @@ obj-$(CONFIG_OMAP) += omap_synctimer.o obj-$(CONFIG_PXA2XX) += pxa2xx_timer.o obj-$(CONFIG_SH4) += sh_timer.o obj-$(CONFIG_TUSB6010) += tusb6010.o +obj-$(CONFIG_DIGIC) += digic-timer.o obj-$(CONFIG_MC146818RTC) += mc146818rtc.o
hw/timer/digic-timer.c new file +117 -0
117 lines not on this page · raw message
hw/timer/digic-timer.h new file +19 -0
@@ -0,0 +1,19 @@ +#ifndef HW_TIMER_DIGIC_TIMER_H +#define HW_TIMER_DIGIC_TIMER_H + +#include "hw/sysbus.h" +#include "qemu/typedefs.h" +#include "hw/ptimer.h" + +#define TYPE_DIGIC_TIMER "digic-timer" +#define DIGIC_TIMER (obj) OBJECT_CHECK(DigicTimerState, (obj), TYPE_DIGIC_TIMER) + +typedef struct DigicTimerState { +SysBusDevice parent_obj; + +MemoryRegion iomem; +QEMUBH *bh; +ptimer_state *ptimer; +}DigicTimerState ; + +#endif /* HW_TIMER_DIGIC_TIMER_H */
include/hw/arm/digic.h +7 -0
@@ -10,6 +10,11 @@#include "cpu-qom.h" +#include "hw/timer/digic-timer.h" + +#define DIGIC4_NB_TIMERS 3 +#define DIGIC4_TIMER_BASE (n) (0xc0210000 + (n) * 0x100) +#define TYPE_DIGIC "digic"#define DIGIC (obj) OBJECT_CHECK(DigicState, (obj), TYPE_DIGIC)
@@ -18,6 +23,8 @@ typedef struct DigicState {Object parent_obj;ARMCPU cpu; + + DigicTimerState timer[DIGIC4_NB_TIMERS]; } DigicState;#endif /* __DIGIC_H__ */
Signature · 1 line
1.8.4.rc3
RFC v4 4/5 hw/arm/digic: add UART support
In reply to Antony Pavlov--- hw/arm/digic.c | 14 ++++ hw/char/Makefile.objs | 1 + hw/char/digic-uart.c | 197 +++++++++++++++++++++++++++++++++++++++++++++++++ hw/char/digic-uart.h | 27 +++++++ include/hw/arm/digic.h | 4 + 5 files changed, 243 insertions(+) create mode 100644 hw/char/digic-uart.c create mode 100644 hw/char/digic-uart.h
hw/arm/digic.c +14 -0
@@ -46,6 +46,11 @@ static void digic_init(Object *obj)snprintf (name,DIGIC_TIMER_NAME_MLEN ,"timer[%d]" , i);object_property_add_child (obj, name,OBJECT (&s->timer[i]),NULL ); } + +object_initialize (&s->uart,sizeof (s->uart),TYPE_DIGIC_UART ); + dev =DEVICE (&s->uart); +qdev_set_parent_bus (dev,sysbus_get_default ()); +object_property_add_child (obj,"uart" ,OBJECT (&s->uart),NULL ); }static void digic_realize (DeviceState *dev,Error **errp)
@@ -71,6 +76,15 @@ static void digic_realize(DeviceState *dev, Error **errp) sbd =SYS_BUS_DEVICE (&s->timer[i]);sysbus_mmio_map (sbd,0 ,DIGIC4_TIMER_BASE (i)); } + +object_property_set_bool (OBJECT (&s->uart), true,"realized" , &err); +if (err !=NULL ) { +error_propagate (errp, err); +return ; + } + + sbd =SYS_BUS_DEVICE (&s->uart); +sysbus_mmio_map (sbd,0 ,DIGIC_UART_BASE ); }static void digic_class_init (ObjectClass *oc,void *data)
hw/char/Makefile.objs +1 -0
@@ -14,6 +14,7 @@ obj-$(CONFIG_COLDFIRE) += mcf_uart.o obj-$(CONFIG_OMAP) += omap_uart.o obj-$(CONFIG_SH4) += sh_serial.o obj-$(CONFIG_PSERIES) += spapr_vty.o +obj-$(CONFIG_DIGIC) += digic-uart.o common-obj-$(CONFIG_ETRAXFS) += etraxfs_ser.o common-obj-$(CONFIG_ISA_DEBUG) += debugcon.o
hw/char/digic-uart.c new file +197 -0
197 lines not on this page · raw message
hw/char/digic-uart.h new file +27 -0
@@ -0,0 +1,27 @@ +#ifndef HW_CHAR_DIGIC_UART_H +#define HW_CHAR_DIGIC_UART_H + +#include "hw/sysbus.h" +#include "qemu/typedefs.h" + +#define TYPE_DIGIC_UART "digic-uart" +#define DIGIC_UART (obj) \ + OBJECT_CHECK(DigicUartState, (obj), TYPE_DIGIC_UART) + +enum { +R_TX =0x00 , +R_RX , +R_ST = (0x14 >>2 ), +R_MAX +}; + +typedef struct DigicUartState { +SysBusDevice parent_obj; + +MemoryRegion regs_region; +CharDriverState *chr; + +uint32_t regs[R_MAX ]; +}DigicUartState ; + +#endif /* HW_CHAR_DIGIC_UART_H */
include/hw/arm/digic.h +4 -0
@@ -11,10 +11,13 @@#include "cpu-qom.h" #include "hw/timer/digic-timer.h" +#include "hw/char/digic-uart.h" #define DIGIC4_NB_TIMERS 3#define DIGIC4_TIMER_BASE (n) (0xc0210000 + (n) * 0x100) +#define DIGIC_UART_BASE 0xc0800000 +#define TYPE_DIGIC "digic"#define DIGIC (obj) OBJECT_CHECK(DigicState, (obj), TYPE_DIGIC)
@@ -25,6 +28,7 @@ typedef struct DigicState {ARMCPU cpu;DigicTimerState timer[DIGIC4_NB_TIMERS ]; + DigicUartState uart; } DigicState;#endif /* __DIGIC_H__ */
Signature · 1 line
1.8.4.rc3
Re: [Qemu-devel] [RFC v4 4/5] hw/arm/digic: add UART support
Quoted 5 lines · Antony Pavlov
hw/char/digic-uart.c new file +5
-0+static int uart_can_rx (void *opaque) +{ +DigicUartState *s = opaque; + +return !(s->regs[R_ST ] &ST_RX_RDY );
hw/char/digic-uart.c line 127
Quoted 10 lines
hw/char/digic-uart.c new file +10
-0+} + +static void uart_rx (void *opaque,const uint8_t *buf,int size) +{ +DigicUartState *s = opaque; + +assert (uart_can_rx (opaque)); + + s->regs[R_ST ] |=ST_RX_RDY ; + s->regs[R_RX ] = *buf;
Does this UART really not have a FIFO?
hw/char/digic-uart.h
Quoted 8 lines
(quoted diff) +1
-0+}hw/char/digic-uart.h new file +0
-0@@ -0,0 +1,27 @@
Copyright/license header comment at start of all files, please (ditto below).
Quoted 14 lines
hw/char/digic-uart.h new file +14
-0+#ifndef HW_CHAR_DIGIC_UART_H +#define HW_CHAR_DIGIC_UART_H + +#include "hw/sysbus.h" +#include "qemu/typedefs.h" + +#define TYPE_DIGIC_UART "digic-uart" +#define DIGIC_UART (obj) \ + OBJECT_CHECK(DigicUartState, (obj), TYPE_DIGIC_UART) + +enum { +R_TX =0x00 , +R_RX , + R_ST = (0x14 >> 2),
hw/char/digic-uart.h line 24
Quoted 10 lines
hw/char/digic-uart.h new file +10
-0+R_MAX +}; + +typedef struct DigicUartState { + SysBusDevice parent_obj; + + MemoryRegion regs_region; + CharDriverState *chr; + + uint32_t regs[R_MAX];
So this thing only has five registers, one of which at least (R_TX) doesn't have state that you'll be storing in this struct anyway, and you're not implementing reads-as-written behaviour for the unknown registers, so I think you should drop the regs[] array and just have individual uint32_t fields for the registers you implement.
Quoted 8 lines
hw/char/digic-uart.h new file +3
-0+} DigicUartState; + +#endif /* HW_CHAR_DIGIC_UART_H */ include/hw/arm/digic.h +0
-0
include/hw/arm/digic.h line 19
Quoted 9 lines
include/hw/arm/digic.h +2
-0@@ -11,10 +11,13 @@#include "cpu-qom.h" #include "hw/timer/digic-timer.h" +#include "hw/char/digic-uart.h" #define DIGIC4_NB_TIMERS 3#define DIGIC4_TIMER_BASE (n) (0xc0210000 + (n) * 0x100) +#define DIGIC_UART_BASE 0xc0800000
Does this really need to be in the header file? It seems like private implementation information that could go in the source file that needs it.
(same is probably true of some of the other macros.)
Quoted 13 lines
include/hw/arm/digic.h +2
-1+#define TYPE_DIGIC "digic"#define DIGIC (obj) OBJECT_CHECK(DigicState, (obj), TYPE_DIGIC)@@ -25,6 +28,7 @@ typedef struct DigicState {ARMCPU cpu;DigicTimerState timer[DIGIC4_NB_TIMERS ]; + DigicUartState uart; } DigicState;#endif /* __DIGIC_H__ */ --
Quoted 2 lines
1.8.4.rc3
thanks
-- PMM
Re: [Qemu-devel] [RFC v4 4/5] hw/arm/digic: add UART support
Quoted 10 lines · On Thu, 5 Sep 2013 19:17:50 +0100 Peter Maydell <[email protected]>…
Quoted 9 lines · Antony Pavlov
hw/char/digic-uart.c new file +9
-0+static int uart_can_rx (void *opaque) +{ +DigicUartState *s = opaque; + +return !(s->regs[R_ST ] &ST_RX_RDY ); +} + +static void uart_rx (void *opaque,const uint8_t *buf,int size) +{
Quoted 8 lines
hw/char/digic-uart.c line 127
Quoted 6 lines
hw/char/digic-uart.c new file +6
-0+DigicUartState *s = opaque; + +assert (uart_can_rx (opaque)); + + s->regs[R_ST ] |=ST_RX_RDY ; + s->regs[R_RX ] = *buf;Does this UART really not have a FIFO?
There is no public documentation on Digic chips.
Only Canon's engineers know something about Digic's FIFO (if it exists :).
Quoted 87 lines
hw/char/digic-uart.h
Quoted 8 lines
(quoted diff) +1
-0+}hw/char/digic-uart.h new file +0
-0@@ -0,0 +1,27 @@Copyright/license header comment at start of all files, please (ditto below).
Quoted 14 lines
hw/char/digic-uart.h new file +14
-0+#ifndef HW_CHAR_DIGIC_UART_H +#define HW_CHAR_DIGIC_UART_H + +#include "hw/sysbus.h" +#include "qemu/typedefs.h" + +#define TYPE_DIGIC_UART "digic-uart" +#define DIGIC_UART (obj) \ + OBJECT_CHECK(DigicUartState, (obj), TYPE_DIGIC_UART) + +enum { +R_TX =0x00 , +R_RX , + R_ST = (0x14 >> 2),hw/char/digic-uart.h line 24
Quoted 10 lines
hw/char/digic-uart.h new file +10
-0+R_MAX +}; + +typedef struct DigicUartState { + SysBusDevice parent_obj; + + MemoryRegion regs_region; + CharDriverState *chr; + + uint32_t regs[R_MAX];So this thing only has five registers, one of which at least (
R_TX) doesn't have state that you'll be storing in this struct anyway, and you're not implementing reads-as-written behaviour for the unknown registers, so I think you should drop the regs[] array and just have individualuint32_tfields for the registers you implement.Quoted 8 lines
hw/char/digic-uart.h new file +3
-0+} DigicUartState; + +#endif /* HW_CHAR_DIGIC_UART_H */ include/hw/arm/digic.h +0
-0include/hw/arm/digic.h line 19
Quoted 9 lines
include/hw/arm/digic.h +2
-0@@ -11,10 +11,13 @@#include "cpu-qom.h" #include "hw/timer/digic-timer.h" +#include "hw/char/digic-uart.h" #define DIGIC4_NB_TIMERS 3#define DIGIC4_TIMER_BASE (n) (0xc0210000 + (n) * 0x100) +#define DIGIC_UART_BASE 0xc0800000Does this really need to be in the header file? It seems like private implementation information that could go in the source file that needs it.
(same is probably true of some of the other macros.)
Quoted 13 lines
include/hw/arm/digic.h +2
-1+#define TYPE_DIGIC "digic"#define DIGIC (obj) OBJECT_CHECK(DigicState, (obj), TYPE_DIGIC)@@ -25,6 +28,7 @@ typedef struct DigicState {ARMCPU cpu;DigicTimerState timer[DIGIC4_NB_TIMERS ]; + DigicUartState uart; } DigicState;#endif /* __DIGIC_H__ */ --Quoted 2 lines
1.8.4.rc3
thanks
-- PMM
Signature · 3 lines
-- Best regards, Antony Pavlov
Re: [Qemu-devel] [RFC v4 4/5] hw/arm/digic: add UART support
Quoted 6 lines · Antony Pavlov
Quoted 1 line · On Thu, 5 Sep 2013 19:17:50 +0100 Peter Maydell <[email protected]>…
Does this UART really not have a FIFO?
There is no public documentation on Digic chips.
Only Canon's engineers know something about Digic's FIFO (if it exists :).
You can deduce its existence though -- does the UART let you feed two or three characters to it at faster than whatever the serial line speed is before it sets the "stop sending me bits" status bit, or does it stop after the first?
If the real firmware uses this for anything remotely serious (ie for more than trivial and default-disabled debug info) it probably does have a FIFO. However, let's assume it doesn't for now.
-- PMM
Re: [Qemu-devel] [RFC v4 4/5] hw/arm/digic: add UART support
Quoted 5 lines · On Fri, 6 Sep 2013 08:25:20 +0100 Peter Maydell <[email protected]>…
Quoted 4 lines · Antony Pavlov
Quoted 1 line · On Thu, 5 Sep 2013 19:17:50 +0100 Peter Maydell <[email protected]>…
Does this UART really not have a FIFO?
Quoted 8 lines
Quoted 2 lines
There is no public documentation on Digic chips.
Only Canon's engineers know something about Digic's FIFO (if it exists :).You can deduce its existence though -- does the UART let you feed two or three characters to it at faster than whatever the serial line speed is before it sets the "stop sending me bits" status bit, or does it stop after the first?
No, I can't :)
How can I check this mysterious "stop sending me bits" status bit? Do you mean the UART hardware flow control pin?
I can't use hardware flow control as I have only 3-wire UART on the camera. Moreover I have to enable hardware flow control in software, but I have no information how to do it.
Quoted 6 lines
If the real firmware uses this for anything remotely serious (ie for more than trivial and default-disabled debug info) it probably does have a FIFO. However, let's assume it doesn't for now.
-- PMM
Signature · 3 lines
-- Best regards, Antony Pavlov
Re: [Qemu-devel] [RFC v4 4/5] hw/arm/digic: add UART support
Quoted 8 lines · Antony Pavlov
Quoted 5 lines · On Fri, 6 Sep 2013 08:25:20 +0100 Peter Maydell <[email protected]>…
You can deduce its existence though -- does the UART let you feed two or three characters to it at faster than whatever the serial line speed is before it sets the "stop sending me bits" status bit, or does it stop after the first?
Quoted 4 lines
No, I can't :)
How can I check this mysterious "stop sending me bits" status bit? Do you mean the UART hardware flow control pin?
I meant ST_TX_RDY, but looking again at the
docs perhaps I misinterpreted it. Do you really
have to do:
* write byte to TX register
* set TX_RDY bit in status register
to get it to send out a byte?
I was expecting a more standard UART interface
which is typically:
* write byte to TX register
* if the UART is unable to accept any more
bytes (ie FIFO full, or just immediately if
no FIFO present) it clears TX_RDY
* software has to wait for TX_RDY to be set
before writing another byte to TX
-- PMM
Re: [Qemu-devel] [RFC v4 4/5] hw/arm/digic: add UART support
Quoted 14 lines · On Fri, 6 Sep 2013 14:40:14 +0100 Peter Maydell <[email protected]>…
Quoted 8 lines · Antony Pavlov
Quoted 5 lines · On Fri, 6 Sep 2013 08:25:20 +0100 Peter Maydell <[email protected]>…
You can deduce its existence though -- does the UART let you feed two or three characters to it at faster than whatever the serial line speed is before it sets the "stop sending me bits" status bit, or does it stop after the first?
Quoted 4 lines
No, I can't :)
How can I check this mysterious "stop sending me bits" status bit? Do you mean the UART hardware flow control pin?
Quoted 7 lines
I meant
ST_TX_RDY, but looking again at the
docs perhaps I misinterpreted it. Do you really
have to do:
* write byte to TX register
* setTX_RDYbit in status registerto get it to send out a byte?
I don't want publish Canon firmware disassembled listings and discuss it in the maillist for legal reasons.
But Canon A1100 firmware can use this routine:
1. wait TX_RDY bit in status register;
2. write TX_RDY and some other (unknown behaviour) bit to status register;
3. write byte to TX register.
IMHO the step 2 is bizarre.
You can easely check me: the disassembly instructions and firmware images can be found via CHDK site. A puts()-like routine can be found at 0xffff18f0 in the Canon A1100IS firmware image.
Quoted 8 lines
I was expecting a more standard UART interface
which is typically:
* write byte to TX register
* if the UART is unable to accept any more
bytes (ie FIFO full, or just immediately if
no FIFO present) it clearsTX_RDY
* software has to wait forTX_RDYto be set
before writing another byte to TX
IMHO the more standart UART outc() routune is:
* wait for UART "transmitter is ready to send next char" flag;
* write char to TX register.
E.g. see
https://github.com/frantony/barebox/blob/master/arch/mips/include/asm/debug_ll_ns16550.h#L60
or
https://github.com/frantony/barebox/blob/master/arch/arm/mach-imx/include/mach/debug_ll.h#L49
--
Best regards,
Antony Pavlov
Re: [Qemu-devel] [RFC v4 4/5] hw/arm/digic: add UART support
Quoted 6 lines · Antony Pavlov
But Canon A1100 firmware can use this routine:
1. waitTX_RDYbit in status register;
2. writeTX_RDYand some other (unknown behaviour) bit to status register;
3. write byte to TX register.IMHO the step 2 is bizarre.
Maybe the TX_RDY bit is write-1-to-clear? Some devices use that kind of thing for a "conditions that happened that could trigger an interrupt" (and if you're using them for polling you can just poll the register).
Quoted 3 lines
IMHO the more standart UART
outc()routune is:
* wait for UART "transmitter is ready to send next char" flag;
* write char to TX register.
Yes, you're right. In either case you can see if there's a uart via:
* wait for TX_RDY to be set
* clear TX_RDY
* write byte to TX
* immediately look at TX_RDY -- if it's set straight away there's almost certainly a FIFO involved; otherwise it would have to wait for the char to go out over serial before setting it again
This is kind of a sidetrack though, we can model it without a UART for the moment.
-- PMM
RFC v4 5/5 hw/arm/digic: add NOR ROM support
In reply to Antony Pavlov--- hw/arm/digic_boards.c | 74 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 74 insertions(+)
hw/arm/digic_boards.c +74 -0
@@ -1,6 +1,13 @@#include "hw/boards.h" #include "exec/address-spaces.h" #include "hw/arm/digic.h" +#include "hw/block/flash.h" +#include "hw/loader.h" +#include "sysemu/sysemu.h" + +#define DIGIC4_ROM0_BASE 0xf0000000 +#define DIGIC4_ROM1_BASE 0xf8000000 +# define DIGIC4_ROM_MAX_SIZE 0x08000000 typedef struct DigicBoardState { DigicState *digic;
@@ -9,6 +16,10 @@ typedef struct DigicBoardState {typedef struct DigicBoard {hwaddr ram_size; +void (*add_rom0)(DigicBoardState *,hwaddr ,const char *); +const char *rom0_def_filename; +void (*add_rom1)(DigicBoardState *,hwaddr ,const char *); +const char *rom1_def_filename;hwaddr start_addr; }DigicBoard ;
@@ -35,11 +46,74 @@ static void digic4_board_init(DigicBoard *board)digic4_board_setup_ram (s, board->ram_size); +if (board->add_rom0) { + board->add_rom0 (s,DIGIC4_ROM0_BASE , board->rom0_def_filename); + } + +if (board->add_rom1) { + board->add_rom1 (s,DIGIC4_ROM1_BASE , board->rom1_def_filename); + } + s->digic->cpu.env.regs[15 ] = board->start_addr; } +static void digic_load_rom (DigicBoardState *s,hwaddr addr, +hwaddr max_size,const char *def_filename) +{ + +target_long rom_size; +const char *filename; + +if (bios_name) { + filename = bios_name; + }else { + filename = def_filename; + } + +if (filename) { +char *fn =qemu_find_file (QEMU_FILE_TYPE_BIOS , filename); + +if (!fn) { +fprintf (stderr,"Couldn't find rom image '%s'.\n" , filename); +exit (1 ); + } + + rom_size =load_image_targphys (fn, addr, max_size); +if (rom_size <0 || rom_size > max_size) { +fprintf (stderr,"Couldn't load rom image '%s'\n" , filename); +exit (1 ); + } + } +} + +static void digic4_add_k8p3215uqb_rom (DigicBoardState *s,hwaddr addr, +const char *def_filename) +{ +#define FLASH_K8P3215UQB_SIZE (4 * 1024 * 1024) +#define FLASH_K8P3215UQB_SECTOR_SIZE (64 * 1024) + +/* +* Samsung K8P3215UQB: +* * AMD command set; +* * multiple sector size: some sectors are 8K the other ones are 64K. +* Alas! The pflash_cfi02_register() function creates a flash +* device with unified sector size. +*/ +pflash_cfi02_register (addr,NULL ,"pflash" ,FLASH_K8P3215UQB_SIZE , +NULL ,FLASH_K8P3215UQB_SECTOR_SIZE , +FLASH_K8P3215UQB_SIZE /FLASH_K8P3215UQB_SECTOR_SIZE , +DIGIC4_ROM_MAX_SIZE /FLASH_K8P3215UQB_SIZE , +4 , +0x00EC ,0x007E ,0x0003 ,0x0001 , +0x0555 ,0x2aa ,0 ); + +digic_load_rom (s, addr,FLASH_K8P3215UQB_SIZE , def_filename); +} +static DigicBoard digic4_board_canon_a1100 = { .ram_size =64 *1024 *1024 , + .add_rom1 = digic4_add_k8p3215uqb_rom, + .rom1_def_filename ="canon-a1100-rom1.bin" ,/* CHDK recommends this address for ROM disassembly */ .start_addr =0xffc00000 , };
Signature · 1 line
1.8.4.rc3
Re: [Qemu-devel] [RFC v4 5/5] hw/arm/digic: add NOR ROM support
hw/arm/digic_boards.c static void digic4_board_init(DigicBoard *board) · line 101
Quoted 7 lines · Antony Pavlov
hw/arm/digic_boards.c +7
-0+/* +* Samsung K8P3215UQB: +* * AMD command set; +* * multiple sector size: some sectors are 8K the other ones are 64K. +* Alas! The pflash_cfi02_register() function creates a flash +* device with unified sector size. +*/
This comment would be more useful if it explained what the practical consequences of this inaccuracy in emulation were...
thanks
-- PMM