ARM: OMAP2+: am335x-bone*: add DT for BeagleBone Black
PATCH 1/1 ARM: OMAP2+: am335x-bone*: add DT for BeagleBone Black
The BeagleBone Black is basically a regular BeagleBone with eMMC and HDMI added, so create a common dtsi both can use.
IMPORTANT: booting the existing am335x-bone.dts will blow up the HDMI transceiver after a dozen boots with an uSD card inserted because LDO will be at 3.3V instead of 1.8.
MMC support for AM335x still isn't in, so only the LDO change has been added.
---
Changes since v4:
attempting to correctly to the cc: stable@ thing
Changes since v3:
removed stray whitespace, spotted by Matt Porter
added CC: stable
Changes since v2:
Updated commit message to point out that the existing DT will damage the board.
Changes since v1:
Added the Makefile entry for the new dts
arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/am335x-bone-common.dtsi | 262 ++++++++++++++++++++++++++++++ arch/arm/boot/dts/am335x-bone.dts | 256 +---------------------------- arch/arm/boot/dts/am335x-boneblack.dts | 17 ++ 4 files changed, 281 insertions(+), 255 deletions(-) create mode 100644 arch/arm/boot/dts/am335x-bone-common.dtsi create mode 100644 arch/arm/boot/dts/am335x-boneblack.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -183,6 +183,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ am335x-evm.dtb \ am335x-evmsk.dtb \ am335x-bone.dtb \ + am335x-boneblack.dtb \ am3517-evm.dtb \ am3517_mt_ventoux.dtb \ am43x-epos-evm.dtb
arch/arm/boot/dts/am335x-bone-common.dtsi new file +262 -0
262 lines not on this page · raw message
arch/arm/boot/dts/am335x-bone.dts +1 -255
259 lines not on this page · raw message
arch/arm/boot/dts/am335x-boneblack.dts new file +17 -0
@@ -0,0 +1,17 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +};
Signature · 1 line
1.8.2.1
PATCH 1/1 ARM: OMAP2+: am335x-bone*: add DT for BeagleBone Black
Quoted 7 lines · Koen Kooi
The BeagleBone Black is basically a regular BeagleBone with eMMC and HDMI added, so create a common dtsi both can use.
IMPORTANT: booting the existing
am335x-bone.dtswill blow up the HDMI transceiver after a dozen boots with an uSD card inserted because LDO will be at 3.3V instead of 1.8.
Quoted 7 lines
MMC support for AM335x still isn't in, so only the LDO change has been added.
Cc stable at vger.kernel.orgSigned-off-by Koen Kooi <[email protected]>Tested-by Tom Rini <[email protected]>Tested-by Matt Porter <[email protected]>
I guess the subject should've included v5? Also, if this is to be stable material, it will likely need rework since I don't think it will apply cleanly to older trees due to DT churn.
Anyways, for this patch...
Even though I've probably already fried my HDMI transciever due to using the original DTS a lot more than a dozen times. (and to TI: yes, I'd accept a new BB black as a sympathy gift.) ;)
Also, I tested this on both BBW and BBW:
Benoit, assuming this looks good to you, can you queue this for v3.12-rc
please? It applies to Linus' HEAD today (which has most of arm-soc
merged), so it should apply cleanly on top of all your stuff.
Kevin
Op 9 sep. 2013, om 17:23 heeft Kevin Hilman <[email protected]> het volgende geschreven:
Quoted 11 lines
Quoted 9 lines · Koen Kooi
The BeagleBone Black is basically a regular BeagleBone with eMMC and HDMI added, so create a common dtsi both can use.
IMPORTANT: booting the existing
am335x-bone.dtswill blow up the HDMI transceiver after a dozen boots with an uSD card inserted because LDO will be at 3.3V instead of 1.8.MMC support for AM335x still isn't in, so only the LDO change has been added.
Quoted 7 lines
Quoted 5 lines
Cc stable at vger.kernel.orgSigned-off-by Koen Kooi <[email protected]>Tested-by Tom Rini <[email protected]>Tested-by Matt Porter <[email protected]>I guess the subject should've included v5?
Yes, I blame it on being monday :)
Quoted 3 lines
Also, if this is to be
stable material, it will likely need rework since I don't think it will apply cleanly to older trees due to DT churn.
Ah right, the preprocessor changes. We'll see what happens with the stable trees. Most older kernels are useless on am335x, but the just released 3.11 is dangerous enough to get this backported.
Quoted 11 lines
Anyways, for this patch...
Acked-by Kevin Hilman <[email protected]>Even though I've probably already fried my HDMI transciever due to using the original DTS a lot more than a dozen times. (and to TI: yes, I'd accept a new BB black as a sympathy gift.) ;)
Also, I tested this on both BBW and BBW:
Tested-by Kevin Hilman <[email protected]>
Thanks!
regards,
Koen
Quoted 6 lines
Benoit, assuming this looks good to you, can you queue this for v3.12-rc
please? It applies to Linus' HEAD today (which has most of arm-soc
merged), so it should apply cleanly on top of all your stuff.Kevin
Quoted 16 lines · Koen Kooi
Op 9 sep. 2013, om 17:23 heeft Kevin Hilman <[email protected]> het volgende geschreven:
Quoted 13 lines
Quoted 11 lines · Koen Kooi
The BeagleBone Black is basically a regular BeagleBone with eMMC and HDMI added, so create a common dtsi both can use.
IMPORTANT: booting the existing
am335x-bone.dtswill blow up the HDMI transceiver after a dozen boots with an uSD card inserted because LDO will be at 3.3V instead of 1.8.MMC support for AM335x still isn't in, so only the LDO change has been added.
Cc stable at vger.kernel.org
Quoted 7 lines
Quoted 5 lines
Quoted 3 lines
Signed-off-by Koen Kooi <[email protected]>Tested-by Tom Rini <[email protected]>Tested-by Matt Porter <[email protected]>I guess the subject should've included v5?
Yes, I blame it on being monday :)
The series you're posting will require rebasing on the current MMC DT series that is being discussed last couple of weeks on the mailing list which were waiting until now as DMA support was missing. Now that DMA support is pulled in, it is safe to apply those patches so I will be reposting them shortly.
Please hold off any changes until those patches are posted. This will avoid unnecessary conflicts.
Thanks,
-Joel
Op 9 sep. 2013, om 20:27 heeft Joel Fernandes <[email protected]> het volgende geschreven:
Quoted 25 lines · Koen Kooi
Quoted 16 lines
Op 9 sep. 2013, om 17:23 heeft Kevin Hilman <[email protected]> het volgende geschreven:
Quoted 13 lines
Quoted 11 lines · Koen Kooi
The BeagleBone Black is basically a regular BeagleBone with eMMC and HDMI added, so create a common dtsi both can use.
IMPORTANT: booting the existing
am335x-bone.dtswill blow up the HDMI transceiver after a dozen boots with an uSD card inserted because LDO will be at 3.3V instead of 1.8.MMC support for AM335x still isn't in, so only the LDO change has been added.
Cc stable at vger.kernel.orgQuoted 7 lines
Quoted 5 lines
Quoted 3 lines
Signed-off-by Koen Kooi <[email protected]>Tested-by Tom Rini <[email protected]>Tested-by Matt Porter <[email protected]>I guess the subject should've included v5?
Yes, I blame it on being monday :)
Quoted 7 lines
The series you're posting will require rebasing on the current MMC DT series that is being discussed last couple of weeks on the mailing list which were waiting until now as DMA support was missing. Now that DMA support is pulled in, it is safe to apply those patches so I will be reposting them shortly.
Please hold off any changes until those patches are posted. This will avoid unnecessary conflicts.
Or you can rebase on top of this patch since it has no dependencies *and* fixes blowing up boards. FWIW, git-rebase, git-cherry-pick and git-am -3 track the rename in my patch just fine.
Quoted 33 lines · Koen Kooi
Op 9 sep. 2013, om 20:27 heeft Joel Fernandes <[email protected]> het volgende geschreven:
Quoted 30 lines · Koen Kooi
Quoted 16 lines
Op 9 sep. 2013, om 17:23 heeft Kevin Hilman <[email protected]> het volgende geschreven:
Quoted 13 lines
Quoted 11 lines · Koen Kooi
The BeagleBone Black is basically a regular BeagleBone with eMMC and HDMI added, so create a common dtsi both can use.
IMPORTANT: booting the existing
am335x-bone.dtswill blow up the HDMI transceiver after a dozen boots with an uSD card inserted because LDO will be at 3.3V instead of 1.8.MMC support for AM335x still isn't in, so only the LDO change has been added.
Cc stable at vger.kernel.orgQuoted 7 lines
Quoted 5 lines
Quoted 3 lines
Signed-off-by Koen Kooi <[email protected]>Tested-by Tom Rini <[email protected]>Tested-by Matt Porter <[email protected]>I guess the subject should've included v5?
Yes, I blame it on being monday :)
The series you're posting will require rebasing on the current MMC DT series that is being discussed last couple of weeks on the mailing list which were waiting until now as DMA support was missing. Now that DMA support is pulled in, it is safe to apply those patches so I will be reposting them shortly.
Quoted 5 lines
Quoted 2 lines
Please hold off any changes until those patches are posted. This will avoid unnecessary conflicts.
Or you can rebase on top of this patch since it has no dependencies *and* fixes blowing up boards. FWIW, git-rebase, git-cherry-pick and git-am -3 track the rename in my patch just fine.
That's fair enough, since Kevin Acked and Benoit is pulling it, I'm fine with rebasing on top of it and we avoid any merge conflicts.
Regards,
-Joel
Quoted 34 lines · Joel Fernandes
Quoted 33 lines · Koen Kooi
Op 9 sep. 2013, om 20:27 heeft Joel Fernandes <[email protected]> het volgende geschreven:
Quoted 30 lines · Koen Kooi
Quoted 16 lines
Op 9 sep. 2013, om 17:23 heeft Kevin Hilman <[email protected]> het volgende geschreven:
Quoted 13 lines
Quoted 11 lines · Koen Kooi
The BeagleBone Black is basically a regular BeagleBone with eMMC and HDMI added, so create a common dtsi both can use.
IMPORTANT: booting the existing
am335x-bone.dtswill blow up the HDMI transceiver after a dozen boots with an uSD card inserted because LDO will be at 3.3V instead of 1.8.MMC support for AM335x still isn't in, so only the LDO change has been added.
Cc stable at vger.kernel.orgQuoted 7 lines
Quoted 5 lines
Quoted 3 lines
Signed-off-by Koen Kooi <[email protected]>Tested-by Tom Rini <[email protected]>Tested-by Matt Porter <[email protected]>I guess the subject should've included v5?
Yes, I blame it on being monday :)
The series you're posting will require rebasing on the current MMC DT series that is being discussed last couple of weeks on the mailing list which were waiting until now as DMA support was missing. Now that DMA support is pulled in, it is safe to apply those patches so I will be reposting them shortly.
Quoted 9 lines
Quoted 5 lines
Quoted 2 lines
Please hold off any changes until those patches are posted. This will avoid unnecessary conflicts.
Or you can rebase on top of this patch since it has no dependencies *and* fixes blowing up boards. FWIW, git-rebase, git-cherry-pick and git-am -3 track the rename in my patch just fine.
That's fair enough, since Kevin Acked and Benoit is pulling it, I'm fine with rebasing on top of it and we avoid any merge conflicts.
I noticed - there were still some comments from Felipe on the v4 series of this patch regarding RF cape and HDMI may be breaking it. How are you addressing that?
Regards,
-Joel
Op 9 sep. 2013, om 21:50 heeft Joel Fernandes <[email protected]> het volgende geschreven:
Quoted 41 lines · Joel Fernandes
Quoted 40 lines · Koen Kooi
Quoted 38 lines
Op 9 sep. 2013, om 20:27 heeft Joel Fernandes <[email protected]> het volgende geschreven:
Quoted 25 lines · Koen Kooi
Quoted 16 lines
Op 9 sep. 2013, om 17:23 heeft Kevin Hilman <[email protected]> het volgende geschreven:
Quoted 13 lines
Quoted 11 lines · Koen Kooi
The BeagleBone Black is basically a regular BeagleBone with eMMC and HDMI added, so create a common dtsi both can use.
IMPORTANT: booting the existing
am335x-bone.dtswill blow up the HDMI transceiver after a dozen boots with an uSD card inserted because LDO will be at 3.3V instead of 1.8.MMC support for AM335x still isn't in, so only the LDO change has been added.
Cc stable at vger.kernel.orgQuoted 7 lines
Quoted 5 lines
Quoted 3 lines
Signed-off-by Koen Kooi <[email protected]>Tested-by Tom Rini <[email protected]>Tested-by Matt Porter <[email protected]>I guess the subject should've included v5?
Yes, I blame it on being monday :)
Quoted 7 lines
The series you're posting will require rebasing on the current MMC DT series that is being discussed last couple of weeks on the mailing list which were waiting until now as DMA support was missing. Now that DMA support is pulled in, it is safe to apply those patches so I will be reposting them shortly.
Please hold off any changes until those patches are posted. This will avoid unnecessary conflicts.
Or you can rebase on top of this patch since it has no dependencies *and* fixes blowing up boards. FWIW, git-rebase, git-cherry-pick and git-am -3 track the rename in my patch just fine.
Quoted 6 lines
Quoted 3 lines
That's fair enough, since Kevin Acked and Benoit is pulling it, I'm fine with rebasing on top of it and we avoid any merge conflicts.
I noticed - there were still some comments from Felipe on the v4 series of this patch regarding RF cape and HDMI may be breaking it. How are you addressing that?
Capes will never go into the .dts and HDMI support needs some serious patching before it can get enabled in the DT. And the RF cape isn't being sold since it has no sw support. No need to worry about things in the 3.15/3.16 timeframe. Unless you want this LDO3 fix not to go in ASAP.
Joel, is there anything relevant *right now* blocking this patch going in? If not, please test it and add your Tested-by: line.
Quoted 48 lines · Koen Kooi
Op 9 sep. 2013, om 21:50 heeft Joel Fernandes <[email protected]> het volgende geschreven:
Quoted 45 lines · Joel Fernandes
Quoted 43 lines · Koen Kooi
Quoted 33 lines
Op 9 sep. 2013, om 20:27 heeft Joel Fernandes <[email protected]> het volgende geschreven:
Quoted 30 lines · Koen Kooi
Quoted 16 lines
Op 9 sep. 2013, om 17:23 heeft Kevin Hilman <[email protected]> het volgende geschreven:
Quoted 13 lines
Quoted 11 lines · Koen Kooi
The BeagleBone Black is basically a regular BeagleBone with eMMC and HDMI added, so create a common dtsi both can use.
IMPORTANT: booting the existing
am335x-bone.dtswill blow up the HDMI transceiver after a dozen boots with an uSD card inserted because LDO will be at 3.3V instead of 1.8.MMC support for AM335x still isn't in, so only the LDO change has been added.
Cc stable at vger.kernel.orgQuoted 7 lines
Quoted 5 lines
Quoted 3 lines
Signed-off-by Koen Kooi <[email protected]>Tested-by Tom Rini <[email protected]>Tested-by Matt Porter <[email protected]>I guess the subject should've included v5?
Yes, I blame it on being monday :)
The series you're posting will require rebasing on the current MMC DT series that is being discussed last couple of weeks on the mailing list which were waiting until now as DMA support was missing. Now that DMA support is pulled in, it is safe to apply those patches so I will be reposting them shortly.
Quoted 5 lines
Quoted 2 lines
Please hold off any changes until those patches are posted. This will avoid unnecessary conflicts.
Or you can rebase on top of this patch since it has no dependencies *and* fixes blowing up boards. FWIW, git-rebase, git-cherry-pick and git-am -3 track the rename in my patch just fine.
That's fair enough, since Kevin Acked and Benoit is pulling it, I'm fine with rebasing on top of it and we avoid any merge conflicts.
Quoted 7 lines
Quoted 2 lines
I noticed - there were still some comments from Felipe on the v4 series of this patch regarding RF cape and HDMI may be breaking it. How are you addressing that?
Capes will never go into the .dts and HDMI support needs some serious patching before it can get enabled in the DT. And the RF cape isn't being sold since it has no sw support. No need to worry about things in the 3.15/3.16 timeframe. Unless you want this LDO3 fix not to go in ASAP.
Joel, is there anything relevant *right now* blocking this patch going in? If not, please test it and add your Tested-by: line.
We don't merge things in hurry and focus is to do things the right way.. I just want to make sure that all possible comments have been addressed.
Otherwise patch looks OK and hope everyone else thinks so too. I am dealing with some merge conflicts right now with my series on top of this though, but they should be easy enough to fix up. That's delaying my testing, but otherwise as such I don't have any objection to this patch (provided the conclusion is that all comments have been addressed..). Thanks!
Regards,
-Joel
Joel Fernandes
Tested-byQuoted 57 lines · Joel Fernandes
Quoted 48 lines · Koen Kooi
Op 9 sep. 2013, om 21:50 heeft Joel Fernandes <[email protected]> het volgende geschreven:
Quoted 45 lines · Joel Fernandes
Quoted 43 lines · Koen Kooi
Quoted 33 lines
Op 9 sep. 2013, om 20:27 heeft Joel Fernandes <[email protected]> het volgende geschreven:
Quoted 30 lines · Koen Kooi
Quoted 16 lines
Op 9 sep. 2013, om 17:23 heeft Kevin Hilman <[email protected]> het volgende geschreven:
Quoted 13 lines
Quoted 11 lines · Koen Kooi
The BeagleBone Black is basically a regular BeagleBone with eMMC and HDMI added, so create a common dtsi both can use.
IMPORTANT: booting the existing
am335x-bone.dtswill blow up the HDMI transceiver after a dozen boots with an uSD card inserted because LDO will be at 3.3V instead of 1.8.MMC support for AM335x still isn't in, so only the LDO change has been added.
Cc stable at vger.kernel.orgQuoted 7 lines
Quoted 5 lines
Quoted 3 lines
Signed-off-by Koen Kooi <[email protected]>Tested-by Tom Rini <[email protected]>Tested-by Matt Porter <[email protected]>I guess the subject should've included v5?
Yes, I blame it on being monday :)
The series you're posting will require rebasing on the current MMC DT series that is being discussed last couple of weeks on the mailing list which were waiting until now as DMA support was missing. Now that DMA support is pulled in, it is safe to apply those patches so I will be reposting them shortly.
Quoted 5 lines
Quoted 2 lines
Please hold off any changes until those patches are posted. This will avoid unnecessary conflicts.
Or you can rebase on top of this patch since it has no dependencies *and* fixes blowing up boards. FWIW, git-rebase, git-cherry-pick and git-am -3 track the rename in my patch just fine.
That's fair enough, since Kevin Acked and Benoit is pulling it, I'm fine with rebasing on top of it and we avoid any merge conflicts.
Quoted 7 lines
Quoted 2 lines
I noticed - there were still some comments from Felipe on the v4 series of this patch regarding RF cape and HDMI may be breaking it. How are you addressing that?
Capes will never go into the .dts and HDMI support needs some serious patching before it can get enabled in the DT. And the RF cape isn't being sold since it has no sw support. No need to worry about things in the 3.15/3.16 timeframe. Unless you want this LDO3 fix not to go in ASAP.
Joel, is there anything relevant *right now* blocking this patch going in? If not, please test it and add your Tested-by: line.
Quoted 8 lines
We don't merge things in hurry and focus is to do things the right way.. I just want to make sure that all possible comments have been addressed.
Otherwise patch looks OK and hope everyone else thinks so too. I am dealing with some merge conflicts right now with my series on top of this though, but they should be easy enough to fix up. That's delaying my testing, but otherwise as such I don't have any objection to this patch (provided the conclusion is that all comments have been addressed..). Thanks!
Koen,
One note though, since I don't use HDMI (or BBB much for that matter), I was ok with taking a risk of upping the ldo3 regulator voltage to 3.3v on my board which I needed to do to get to the boot prompt.
I applied my AM335x DMA and MMC patches and tried to boot with rootfs as MMC1.
With 1.8v, I get the following during boot:
[ 2.236043] mmc0: host doesn't support card's voltages [ 2.241659] mmc0: error -22 whilst initialising SD card
That's strange because I do have an SDHC card. With 3.3v it works fine.
I will add a note about this to my series. Since this more of an MMC issue than anything, and your patch series doesn't enable MMC, you can add my tested-by:
Later on, the regulator voltage may need to be tweaked for MMC support.
Regards,
-Joel
Op 10 sep. 2013, om 01:42 heeft Joel Fernandes <[email protected]> het volgende geschreven:
Quoted 78 lines · Joel Fernandes
Quoted 57 lines · Koen Kooi
Quoted 48 lines
Op 9 sep. 2013, om 21:50 heeft Joel Fernandes <[email protected]> het volgende geschreven:
Quoted 45 lines · Joel Fernandes
Quoted 43 lines · Koen Kooi
Quoted 33 lines
Op 9 sep. 2013, om 20:27 heeft Joel Fernandes <[email protected]> het volgende geschreven:
Quoted 30 lines · Koen Kooi
Quoted 16 lines
Op 9 sep. 2013, om 17:23 heeft Kevin Hilman <[email protected]> het volgende geschreven:
Quoted 13 lines
Quoted 11 lines · Koen Kooi
The BeagleBone Black is basically a regular BeagleBone with eMMC and HDMI added, so create a common dtsi both can use.
IMPORTANT: booting the existing
am335x-bone.dtswill blow up the HDMI transceiver after a dozen boots with an uSD card inserted because LDO will be at 3.3V instead of 1.8.MMC support for AM335x still isn't in, so only the LDO change has been added.
Cc stable at vger.kernel.orgQuoted 7 lines
Quoted 5 lines
Quoted 3 lines
Signed-off-by Koen Kooi <[email protected]>Tested-by Tom Rini <[email protected]>Tested-by Matt Porter <[email protected]>I guess the subject should've included v5?
Yes, I blame it on being monday :)
The series you're posting will require rebasing on the current MMC DT series that is being discussed last couple of weeks on the mailing list which were waiting until now as DMA support was missing. Now that DMA support is pulled in, it is safe to apply those patches so I will be reposting them shortly.
Quoted 5 lines
Quoted 2 lines
Please hold off any changes until those patches are posted. This will avoid unnecessary conflicts.
Or you can rebase on top of this patch since it has no dependencies *and* fixes blowing up boards. FWIW, git-rebase, git-cherry-pick and git-am -3 track the rename in my patch just fine.
That's fair enough, since Kevin Acked and Benoit is pulling it, I'm fine with rebasing on top of it and we avoid any merge conflicts.
Quoted 7 lines
Quoted 2 lines
I noticed - there were still some comments from Felipe on the v4 series of this patch regarding RF cape and HDMI may be breaking it. How are you addressing that?
Capes will never go into the .dts and HDMI support needs some serious patching before it can get enabled in the DT. And the RF cape isn't being sold since it has no sw support. No need to worry about things in the 3.15/3.16 timeframe. Unless you want this LDO3 fix not to go in ASAP.
Joel, is there anything relevant *right now* blocking this patch going in? If not, please test it and add your Tested-by: line.
Quoted 8 lines
We don't merge things in hurry and focus is to do things the right way.. I just want to make sure that all possible comments have been addressed.
Otherwise patch looks OK and hope everyone else thinks so too. I am dealing with some merge conflicts right now with my series on top of this though, but they should be easy enough to fix up. That's delaying my testing, but otherwise as such I don't have any objection to this patch (provided the conclusion is that all comments have been addressed..). Thanks!
Koen,
One note though, since I don't use HDMI (or BBB much for that matter), I was ok with taking a risk of upping the ldo3 regulator voltage to 3.3v on my board which I needed to do to get to the boot prompt.
I applied my AM335x DMA and MMC patches and tried to boot with rootfs as MMC1.With 1.8v, I get the following during boot:
[ 2.236043] mmc0: host doesn't support card's voltages [ 2.241659] mmc0: error -22 whilst initialising SD card
Quoted 8 lines
That's strange because I do have an SDHC card. With 3.3v it works fine.
I will add a note about this to my series. Since this more of an MMC issue than anything, and your patch series doesn't enable MMC, you can add my tested-by:
Tested-by Joel Fernandes <[email protected]>Later on, the regulator voltage may need to be tweaked for MMC support.
See https://lkml.org/lkml/2013/9/6/95 and https://lkml.org/lkml/2013/9/6/183
Quoted 80 lines · Koen Kooi
Op 10 sep. 2013, om 01:42 heeft Joel Fernandes <[email protected]> het volgende geschreven:
Quoted 77 lines · Joel Fernandes
Quoted 54 lines · Koen Kooi
Quoted 46 lines
Op 9 sep. 2013, om 21:50 heeft Joel Fernandes <[email protected]> het volgende geschreven:
Quoted 43 lines · Joel Fernandes
Quoted 41 lines · Koen Kooi
Quoted 33 lines
Op 9 sep. 2013, om 20:27 heeft Joel Fernandes <[email protected]> het volgende geschreven:
Quoted 30 lines · Koen Kooi
Quoted 16 lines
Op 9 sep. 2013, om 17:23 heeft Kevin Hilman <[email protected]> het volgende geschreven:
Quoted 13 lines
Quoted 11 lines · Koen Kooi
The BeagleBone Black is basically a regular BeagleBone with eMMC and HDMI added, so create a common dtsi both can use.
IMPORTANT: booting the existing
am335x-bone.dtswill blow up the HDMI transceiver after a dozen boots with an uSD card inserted because LDO will be at 3.3V instead of 1.8.MMC support for AM335x still isn't in, so only the LDO change has been added.
Cc stable at vger.kernel.orgQuoted 7 lines
Quoted 5 lines
Quoted 3 lines
Signed-off-by Koen Kooi <[email protected]>Tested-by Tom Rini <[email protected]>Tested-by Matt Porter <[email protected]>I guess the subject should've included v5?
Yes, I blame it on being monday :)
The series you're posting will require rebasing on the current MMC DT series that is being discussed last couple of weeks on the mailing list which were waiting until now as DMA support was missing. Now that DMA support is pulled in, it is safe to apply those patches so I will be reposting them shortly.
Quoted 4 lines
Quoted 2 lines
Please hold off any changes until those patches are posted. This will avoid unnecessary conflicts.
Or you can rebase on top of this patch since it has no dependencies *and* fixes blowing up boards. FWIW, git-rebase, git-cherry-pick and git-am -3 track the rename in my patch just fine.
That's fair enough, since Kevin Acked and Benoit is pulling it, I'm fine with rebasing on top of it and we avoid any merge conflicts.
Quoted 6 lines
Quoted 2 lines
I noticed - there were still some comments from Felipe on the v4 series of this patch regarding RF cape and HDMI may be breaking it. How are you addressing that?
Capes will never go into the .dts and HDMI support needs some serious patching before it can get enabled in the DT. And the RF cape isn't being sold since it has no sw support. No need to worry about things in the 3.15/3.16 timeframe. Unless you want this LDO3 fix not to go in ASAP.
Joel, is there anything relevant *right now* blocking this patch going in? If not, please test it and add your Tested-by: line.
Quoted 8 lines
We don't merge things in hurry and focus is to do things the right way.. I just want to make sure that all possible comments have been addressed.
Otherwise patch looks OK and hope everyone else thinks so too. I am dealing with some merge conflicts right now with my series on top of this though, but they should be easy enough to fix up. That's delaying my testing, but otherwise as such I don't have any objection to this patch (provided the conclusion is that all comments have been addressed..). Thanks!
Koen,
One note though, since I don't use HDMI (or BBB much for that matter), I was ok with taking a risk of upping the ldo3 regulator voltage to 3.3v on my board which I needed to do to get to the boot prompt.
I applied my AM335x DMA and MMC patches and tried to boot with rootfs as MMC1.With 1.8v, I get the following during boot:
[ 2.236043] mmc0: host doesn't support card's voltages [ 2.241659] mmc0: error -22 whilst initialising SD cardThat's strange because I do have an SDHC card. With 3.3v it works fine.
Quoted 8 lines
Quoted 6 lines
I will add a note about this to my series. Since this more of an MMC issue than anything, and your patch series doesn't enable MMC, you can add my tested-by:
Tested-by Joel Fernandes <[email protected]>Later on, the regulator voltage may need to be tweaked for MMC support.
See https://lkml.org/lkml/2013/9/6/95 and https://lkml.org/lkml/2013/9/6/183
Ok since you said in above thread you'll rebase the card detect and the regulator fixes , I'll let you do that and drop my drop my hacked mmc1 patch for BBB from my series.
Regards,
-Joel