Vanilla kernel 3.11.0 boot problem on Pandaboard.
I built the kernel-headers and kernel-image .deb packages using make-kpkg native on the 3.18.3.6 kernel.
The package installs created new uEnv.txt, uImage an uInitrd.
Do I need an updated uboot for 3.11?
[125588.918060] Restarting system.
Serial console log
===========
U-Boot SPL 2011.12-00002-g1bdc71d (Feb 13 2012 - 18:52:25) Texas Instruments OMAP4430 ES2.3
OMAP SD/MMC: 0
reading u-boot.img
reading u-boot.img
U-Boot 2011.12-00002-g1bdc71d (Feb 13 2012 - 18:52:25)
CPU : OMAP4430 ES2.3 Board: OMAP4 Panda I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0
Using default environment
In: serial Out: serial Err: serial Hit any key to stop autoboot: 0
SD/MMC found on device 0
reading uEnv.txt
119 bytes read
Loaded environment from uEnv.txt
Importing environment from mmc ...
Running uenvcmd ...
reading uImage
4039336 bytes read
reading uInitrd
2187985 bytes read
## Booting kernel from Legacy Image at 80000000 ...
Image Name: kernel 3.11.0-07887-gb409624-dir Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4039272 Bytes = 3.9 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 81600000 ...
Image Name: ramdisk 3.11.0-07887-gb409624-di Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 2187921 Bytes = 2.1 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Regards
Sid.
Signature · 4 lines
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Senior Staff Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks
Quoted 34 lines · Sid Boyce
I built the kernel-headers and kernel-image .deb packages using make-kpkg native on the 3.18.3.6 kernel.
The package installs created new uEnv.txt, uImage an uInitrd.
Do I need an updated uboot for 3.11?
[125588.918060] Restarting system.Serial console log
===========
U-Boot SPL 2011.12-00002-g1bdc71d (Feb 13 2012 - 18:52:25) Texas Instruments OMAP4430 ES2.3
OMAP SD/MMC: 0
reading u-boot.img
reading u-boot.imgU-Boot 2011.12-00002-g1bdc71d (Feb 13 2012 - 18:52:25)
CPU : OMAP4430 ES2.3 Board: OMAP4 Panda I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0Using default environment
In: serial Out: serial Err: serial Hit any key to stop autoboot: 0SD/MMC found on device 0
reading uEnv.txt
Quoted 9 lines
119 bytes read
Loaded environment from uEnv.txt
Importing environment from mmc ...
Running uenvcmd ...
reading uImage4039336 bytes read
reading uInitrd
Missing dtb load? 3.11 onwards we are purely device tree for OMAP4.
Quoted 23 lines
2187985 bytes read
## Booting kernel from Legacy Image at 80000000 ...Image Name: kernel 3.11.0-07887-gb409624-dir Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4039272 Bytes = 3.9 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 81600000 ... Image Name: ramdisk 3.11.0-07887-gb409624-di Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 2187921 Bytes = 2.1 MiBLoad Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OKStarting kernel ...
Regards
Sid.
Signature · 2 lines
Regards, Nishanth Menon