Skip to contentSkip to conversation

Vanilla kernel 3.11.0 boot problem on Pandaboard.

DISCUSSION Sid Boyce 2 participants 2 messages Sep 9, 2013 – Sep 10, 2013

lore
Share & tools
lore

Sid Boyce

author
#0 lore raw

I built the kernel-headers and kernel-image .deb packages using make-kpkg native on the 3.18.3.6 kernel.

The package installs created new uEnv.txt, uImage an uInitrd.

Do I need an updated uboot for 3.11?

[125588.918060] Restarting system.

Serial console log
===========
U-Boot SPL 2011.12-00002-g1bdc71d (Feb 13 2012 - 18:52:25) Texas Instruments OMAP4430 ES2.3
OMAP SD/MMC: 0
reading u-boot.img
reading u-boot.img

U-Boot 2011.12-00002-g1bdc71d (Feb 13 2012 - 18:52:25)

CPU  : OMAP4430 ES2.3
Board: OMAP4 Panda
I2C:   ready
DRAM:  1 GiB
MMC:   OMAP SD/MMC: 0

Using default environment

In:    serial
Out:   serial
Err:   serial
Hit any key to stop autoboot:  0

SD/MMC found on device 0
reading uEnv.txt

119 bytes read
Loaded environment from uEnv.txt
Importing environment from mmc ...
Running uenvcmd ...
reading uImage

4039336 bytes read
reading uInitrd

2187985 bytes read
## Booting kernel from Legacy Image at 80000000 ...

   Image Name:   kernel 3.11.0-07887-gb409624-dir
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4039272 Bytes = 3.9 MiB

Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 81600000 ...

   Image Name:   ramdisk 3.11.0-07887-gb409624-di
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    2187921 Bytes = 2.1 MiB

Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK

Starting kernel ...

Regards
Sid.

Signature · 4 lines
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
Senior Staff Specialist, Cricket Coach
Microsoft Windows Free Zone - Linux used for all Computing Tasks
#1 lore raw
Quoted 34 lines · Sid Boyce

I built the kernel-headers and kernel-image .deb packages using make-kpkg native on the 3.18.3.6 kernel.

The package installs created new uEnv.txt, uImage an uInitrd.

Do I need an updated uboot for 3.11?

[125588.918060] Restarting system.

Serial console log
===========
U-Boot SPL 2011.12-00002-g1bdc71d (Feb 13 2012 - 18:52:25) Texas Instruments OMAP4430 ES2.3
OMAP SD/MMC: 0
reading u-boot.img
reading u-boot.img

U-Boot 2011.12-00002-g1bdc71d (Feb 13 2012 - 18:52:25)

CPU  : OMAP4430 ES2.3
Board: OMAP4 Panda
I2C:   ready
DRAM:  1 GiB
MMC:   OMAP SD/MMC: 0

Using default environment

In:    serial
Out:   serial
Err:   serial
Hit any key to stop autoboot:  0

SD/MMC found on device 0
reading uEnv.txt

Quoted 9 lines

119 bytes read
Loaded environment from uEnv.txt
Importing environment from mmc ...
Running uenvcmd ...
reading uImage

4039336 bytes read
reading uInitrd

Missing dtb load? 3.11 onwards we are purely device tree for OMAP4.

Quoted 23 lines

2187985 bytes read
## Booting kernel from Legacy Image at 80000000 ...

    Image Name:   kernel 3.11.0-07887-gb409624-dir
    Image Type:   ARM Linux Kernel Image (uncompressed)
    Data Size:    4039272 Bytes = 3.9 MiB
    Load Address: 80008000
    Entry Point:  80008000
    Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 81600000 ...
    Image Name:   ramdisk 3.11.0-07887-gb409624-di
    Image Type:   ARM Linux RAMDisk Image (gzip compressed)
    Data Size:    2187921 Bytes = 2.1 MiB

Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK

Starting kernel ...

Regards
Sid.

Signature · 2 lines
Regards,
Nishanth Menon