Skip to contentSkip to conversation

i.MX6DL/S regression in mx6dl_pins.h

U-Boot Eric Nelson 3 participants 3 messages Sep 12, 2013 – Sep 13, 2013

lore
Share & tools
lore
#0 lore raw

Hi all,

It seems to be all about displays and mux/pad registers for me these days.

I just tracked down an issue related to commit 87d720e0c that causes improper display on our RGB displays.

In particular, the pad settings for these two registers lost their drive-strength value:

	MX6_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2
	MX6_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10

I could make the case that things like pad drive strength are a board-level tuning function, and belong in board-specific files, but I think all RGB displays used with i.MX6 need these values (and they should probably match the 6DQ).

Let me know if you'd like me to send a patch for this.

I have some other notes regarding consolidation of 6DQ and 6DLS that I'll send separately.

Regards,

Eric

#1 lore raw

Hi Eric,

Quoted 14 lines · Eric Nelson

Hi all,

It seems to be all about displays and mux/pad registers for me these days.

I just tracked down an issue related to commit 87d720e0c that causes improper display on our RGB displays.

In particular, the pad settings for these two registers lost their drive-strength value:

        MX6_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2
        MX6_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10
Quoted 6 lines

I could make the case that things like pad drive strength are a board-level tuning function, and belong in board-specific files, but I think all RGB displays used with i.MX6 need these values (and they should probably match the 6DQ).

Let me know if you'd like me to send a patch for this.

Yes, please send a patch for this when you have a chance.

Thanks,

Fabio Estevam

#2 lore raw
In reply to Eric Nelson

Hello Eric,

Le 12/09/2013 23:56, Eric Nelson a ?crit :

Quoted 5 lines

Hi all,

It seems to be all about displays and mux/pad registers for me these days.

Quoted 8 lines

I just tracked down an issue related to commit 87d720e0c that causes improper display on our RGB displays.

In particular, the pad settings for these two registers lost their drive-strength value:

    MX6_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2
    MX6_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10

You're right, it was a mistake for these two pads.

Quoted 8 lines

I could make the case that things like pad drive strength are a board-level tuning function, and belong in board-specific files, but I think all RGB displays used with i.MX6 need these values (and they should probably match the 6DQ).

Let me know if you'd like me to send a patch for this.

Quoted 7 lines

I have some other notes regarding consolidation of 6DQ and 6DLS that I'll send separately.

Regards,

Eric

Best regards
Pierre