i.MX6DL/S regression in mx6dl_pins.h
Hi all,
It seems to be all about displays and mux/pad registers for me these days.
I just tracked down an issue related to commit 87d720e0c that causes improper display on our RGB displays.
In particular, the pad settings for these two registers lost their drive-strength value:
MX6_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2 MX6_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10
I could make the case that things like pad drive strength are a board-level tuning function, and belong in board-specific files, but I think all RGB displays used with i.MX6 need these values (and they should probably match the 6DQ).
Let me know if you'd like me to send a patch for this.
I have some other notes regarding consolidation of 6DQ and 6DLS that I'll send separately.
Regards,
Eric
Hi Eric,
Quoted 14 lines · Eric Nelson
Hi all,
It seems to be all about displays and mux/pad registers for me these days.
I just tracked down an issue related to commit
87d720e0cthat causes improper display on our RGB displays.In particular, the pad settings for these two registers lost their drive-strength value:
MX6_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2 MX6_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10
Quoted 6 lines
I could make the case that things like pad drive strength are a board-level tuning function, and belong in board-specific files, but I think all RGB displays used with i.MX6 need these values (and they should probably match the 6DQ).
Let me know if you'd like me to send a patch for this.
Yes, please send a patch for this when you have a chance.
Thanks,
Fabio Estevam
Hello Eric,
Le 12/09/2013 23:56, Eric Nelson a ?crit :
Quoted 5 lines
Hi all,
It seems to be all about displays and mux/pad registers for me these days.
Quoted 8 lines
I just tracked down an issue related to commit
87d720e0cthat causes improper display on our RGB displays.In particular, the pad settings for these two registers lost their drive-strength value:
MX6_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2 MX6_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10
You're right, it was a mistake for these two pads.
Quoted 8 lines
I could make the case that things like pad drive strength are a board-level tuning function, and belong in board-specific files, but I think all RGB displays used with i.MX6 need these values (and they should probably match the 6DQ).
Let me know if you'd like me to send a patch for this.
Quoted 7 lines
I have some other notes regarding consolidation of 6DQ and 6DLS that I'll send separately.
Regards,
Eric
Best regards
Pierre