Skip to contentSkip to conversation

README: I2C: Fix indent

PATCH New Nobuhiro Iwamatsu 2 participants 4 messages Oct 11, 2013 – Oct 17, 2013 I2C

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 README: I2C: Fix indent

---
 README | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
README +4 -4
index cee8e2f..77d2e80 100644
@@ -1987,16 +1987,16 @@ CBFS (Coreboot Filesystem) support
 		    offset CONFIG_SYS_FSL_I2C_SPEED for the i2c speed and
 		    CONFIG_SYS_FSL_I2C_SLAVE for the slave addr of the first
 		    bus.
-                  - If your board supports a second fsl i2c bus, define
+		  - If your board supports a second fsl i2c bus, define
 		    CONFIG_SYS_FSL_I2C2_OFFSET for the register offset
 		    CONFIG_SYS_FSL_I2C2_SPEED for the speed and
 		    CONFIG_SYS_FSL_I2C2_SLAVE for the slave address of the
 		    second bus.
 
 		- drivers/i2c/tegra_i2c.c:
-		 - activate this driver with CONFIG_SYS_I2C_TEGRA
-		 - This driver adds 4 i2c buses with a fix speed from
-		   100000 and the slave addr 0!
+		  - activate this driver with CONFIG_SYS_I2C_TEGRA
+		  - This driver adds 4 i2c buses with a fix speed from
+		    100000 and the slave addr 0!
 
 		- drivers/i2c/ppc4xx_i2c.c
 		  - activate this driver with CONFIG_SYS_I2C_PPC4XX
Signature · 1 line
1.8.4.rc3
#1 lore raw

PATCH 2/2 i2c: sh_i2c: Avoid using I2C prior to relocation

If user uses the I2C in before the relocation, board of sh and rmobile will not start. This will solve this problem.

---
 drivers/i2c/sh_i2c.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
drivers/i2c/sh_i2c.c +8 -2
index 58f8bf1..808202c 100644
@@ -1,6 +1,6 @@
 /*
- * Copyright (C) 2011 Renesas Solutions Corp.
- * Copyright (C) 2011 Nobuhiro Iwamatsu <[email protected]>
+ * Copyright (C) 2011, 2013 Renesas Solutions Corp.
+ * Copyright (C) 2011, 2013 Nobuhiro Iwamatsu <[email protected]>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -8,6 +8,8 @@
 #include <common.h>
 #include <asm/io.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* Every register is 32bit aligned, but only 8bits in size */
 #define ureg(name) u8 name; u8 __pad_##name##0; u16 __pad_##name##1;
 struct sh_i2c {
@@ -240,6 +242,10 @@ void i2c_init(int speed, int slaveaddr)
 {
 	int num, denom, tmp;
 
+	/* No i2c support prior to relocation */
+	if (!(gd->flags & GD_FLG_RELOC))
+		return;
+
 #ifdef CONFIG_I2C_MULTI_BUS
 	current_bus = 0;
 #endif
Signature · 1 line
1.8.4.rc3
#2 lore raw

PATCH 2/2 i2c: sh_i2c: Avoid using I2C prior to relocation

Hello Nobuhiro,

Am 11.10.2013 09:23, schrieb Nobuhiro Iwamatsu:

Quoted 7 lines

If user uses the I2C in before the relocation, board of sh and rmobile will not start. This will solve this problem.

---
  drivers/i2c/sh_i2c.c | 10 ++++++++--
  1 file changed, 8 insertions(+), 2 deletions(-)

Applied to u-boot-i2c.git

Thanks!

bye,
Heiko

Signature · 2 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
#3 lore raw

PATCH 1/2 README: I2C: Fix indent

In reply to Nobuhiro Iwamatsu

Hello Nobuhiro,

Am 11.10.2013 09:23, schrieb Nobuhiro Iwamatsu:

Quoted 4 lines
---
  README | 8 ++++----
  1 file changed, 4 insertions(+), 4 deletions(-)

Applied to u-boot-i2c.git

Thanks!

bye,
Heiko

Signature · 2 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany