README: I2C: Fix indent
PATCH 1/2 README: I2C: Fix indent
Signed-off-by Nobuhiro Iwamatsu <[email protected]>
--- README | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
README +4 -4
@@ -1987,16 +1987,16 @@ CBFS (Coreboot Filesystem) support offset CONFIG_SYS_FSL_I2C_SPEED for the i2c speed and CONFIG_SYS_FSL_I2C_SLAVE for the slave addr of the first bus. - - If your board supports a second fsl i2c bus, define + - If your board supports a second fsl i2c bus, define CONFIG_SYS_FSL_I2C2_OFFSET for the register offset CONFIG_SYS_FSL_I2C2_SPEED for the speed and CONFIG_SYS_FSL_I2C2_SLAVE for the slave address of the second bus. - drivers/i2c/tegra_i2c.c: - - activate this driver with CONFIG_SYS_I2C_TEGRA - - This driver adds 4 i2c buses with a fix speed from - 100000 and the slave addr 0! + - activate this driver with CONFIG_SYS_I2C_TEGRA + - This driver adds 4 i2c buses with a fix speed from + 100000 and the slave addr 0! - drivers/i2c/ppc4xx_i2c.c - activate this driver with CONFIG_SYS_I2C_PPC4XX
Signature · 1 line
1.8.4.rc3
PATCH 2/2 i2c: sh_i2c: Avoid using I2C prior to relocation
If user uses the I2C in before the relocation, board of sh and rmobile will not start. This will solve this problem.
Signed-off-by Nobuhiro Iwamatsu <[email protected]>
--- drivers/i2c/sh_i2c.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
drivers/i2c/sh_i2c.c +8 -2
@@ -1,6 +1,6 @@/* -* Copyright (C) 2011 Renesas Solutions Corp. -* Copyright (C) 2011 Nobuhiro Iwamatsu <[email protected]> +* Copyright (C) 2011, 2013 Renesas Solutions Corp. +* Copyright (C) 2011, 2013 Nobuhiro Iwamatsu <[email protected]> * * SPDX-License-Identifier: GPL-2.0+ */
@@ -8,6 +8,8 @@#include <common.h> #include <asm/io.h> +DECLARE_GLOBAL_DATA_PTR ; +/* Every register is 32bit aligned, but only 8bits in size */ #define ureg (name) u8 name; u8 __pad_##name##0; u16 __pad_##name##1;struct sh_i2c {
@@ -240,6 +242,10 @@ void i2c_init(int speed, int slaveaddr) {int num, denom, tmp; +/* No i2c support prior to relocation */ +if (!(gd->flags &GD_FLG_RELOC )) +return ; +#ifdef CONFIG_I2C_MULTI_BUS current_bus =0 ;#endif
Signature · 1 line
1.8.4.rc3
PATCH 2/2 i2c: sh_i2c: Avoid using I2C prior to relocation
Hello Nobuhiro,
Am 11.10.2013 09:23, schrieb Nobuhiro Iwamatsu:
Quoted 7 lines
If user uses the I2C in before the relocation, board of sh and rmobile will not start. This will solve this problem.
Signed-off-by Nobuhiro Iwamatsu<[email protected]>--- drivers/i2c/sh_i2c.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
Applied to u-boot-i2c.git
Thanks!
bye,
Heiko
Signature · 2 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
PATCH 1/2 README: I2C: Fix indent
In reply to Nobuhiro IwamatsuHello Nobuhiro,
Am 11.10.2013 09:23, schrieb Nobuhiro Iwamatsu:
Quoted 4 lines
Signed-off-by Nobuhiro Iwamatsu<[email protected]>--- README | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
Applied to u-boot-i2c.git
Thanks!
bye,
Heiko
Signature · 2 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany