ARM: twister: add missing gpio clock init
PATCH 1/1 ARM: twister: add missing gpio clock init
Commit f33b9bd3984fb11e1d8566a866adc5957b1e1c9d breaks boards which do not explicitly enable the gpio clocks. This causes the twister spl to hang, since it uses the no longer enabled gpio 55. Add CONFIG_OMAP3_GPIO_2 to unbrick the board.
--- include/configs/twister.h | 3 +++ 1 file changed, 3 insertions(+)
include/configs/twister.h +3 -0
@@ -50,4 +50,7 @@#define CONFIG_SYS_SPL_ARGS_ADDR (PHYS_SDRAM_1 + 0x100)#define CONFIG_SPL_BOARD_INIT +/* gpio 55 is used as SPL_OS_BOOT_KEY */ +#define CONFIG_OMAP3_GPIO_2 +#endif /* __CONFIG_H */
Signature · 1 line
1.8.3.2
PATCH 1/1 ARM: twister: add missing gpio clock init
Quoted 18 lines · Jeroen Hofstee
Commit
f33b9bd3984fb11e1d8566a866adc5957b1e1c9dbreaks boards which do not explicitly enable the gpio clocks. This causes the twister spl to hang, since it uses the no longer enabled gpio 55. AddCONFIG_OMAP3_GPIO_2to unbrick the board.Cc Stefano Babic <[email protected]>Cc Tapani Utriainen <[email protected]>Signed-off-by Jeroen Hofstee <[email protected]>--- include/configs/twister.h | 3 +++ 1 file changed, 3 insertions(+)include/configs/twister.h +0
-0
include/configs/twister.h line 56
Quoted 7 lines
include/configs/twister.h +3
-0@@ -50,4 +50,7 @@#define CONFIG_SYS_SPL_ARGS_ADDR (PHYS_SDRAM_1 + 0x100)#define CONFIG_SPL_BOARD_INIT +/* gpio 55 is used as SPL_OS_BOOT_KEY */ +#define CONFIG_OMAP3_GPIO_2 +#endif /* __CONFIG_H */
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
Quoted 9 lines · Jeroen Hofstee
Commit
f33b9bd3984fb11e1d8566a866adc5957b1e1c9dbreaks boards which do not explicitly enable the gpio clocks. This causes the twister spl to hang, since it uses the no longer enabled gpio 55. AddCONFIG_OMAP3_GPIO_2to unbrick the board.Cc Stefano Babic <[email protected]>Cc Tapani Utriainen <[email protected]>Signed-off-by Jeroen Hofstee <[email protected]>Acked-by Stefano Babic <[email protected]>
Applied to u-boot-ti/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140108/6b1997c4/attachment.pgp>