ARM: atmel: add sama5d3 Xplained board support
PATCH 1/1 ARM: atmel: add sama5d3 Xplained board support
Add sama5d3 Xplained board support which use Atmel SAMA5D36 SoC. Now it supports boot from NAND flash and SD/MMC card. Features support:
- NAND flash
- SD/MMC card
- Two USB hosts
- Ethernet (one GMAC, one EMAC)
---
board/atmel/sama5d3_xplained/Makefile | 15 ++ board/atmel/sama5d3_xplained/sama5d3_xplained.c | 130 +++++++++++++++ boards.cfg | 2 + include/configs/sama5d3_xplained.h | 203 ++++++++++++++++++++++++ 4 files changed, 350 insertions(+) create mode 100644 board/atmel/sama5d3_xplained/Makefile create mode 100644 board/atmel/sama5d3_xplained/sama5d3_xplained.c create mode 100644 include/configs/sama5d3_xplained.h
board/atmel/sama5d3_xplained/Makefile new file +15 -0
@@ -0,0 +1,15 @@ +# +# (C) Copyright 2003-2008 +# Wolfgang Denk, DENX Software Engineering, wd at denx.de. +# +# (C) Copyright 2008 +# Stelian Pop <[email protected]> +# Lead Tech Design <www.leadtechdesign.com> +# +# (C) Copyright 2014 +# Bo Shen <[email protected]> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += sama5d3_xplained.o
board/atmel/sama5d3_xplained/sama5d3_xplained.c new file +130 -0
130 lines not on this page · raw message
boards.cfg +2 -0
@@ -271,6 +271,8 @@ Active arm armv7 am33xx ti ti816x Active arm armv7 at91 atmel sama5d3xek sama5d3xek_mmc sama5d3xek:SAMA5D3,SYS_USE_MMC Bo Shen <[email protected]> Active arm armv7 at91 atmel sama5d3xek sama5d3xek_nandflash sama5d3xek:SAMA5D3,SYS_USE_NANDFLASH Bo Shen <[email protected]> Active arm armv7 at91 atmel sama5d3xek sama5d3xek_spiflash sama5d3xek:SAMA5D3,SYS_USE_SERIALFLASH Bo Shen <[email protected]> +Active arm armv7 at91 atmel sama5d3_xplained sama5d3_xplained_mmc sama5d3_xplained:SAMA5D3,SYS_USE_MMC Bo Shen <[email protected]> +Active arm armv7 at91 atmel sama5d3_xplained sama5d3_xplained_nandflash sama5d3_xplained:SAMA5D3,SYS_USE_NANDFLASH Bo Shen <[email protected]> Active arm armv7 exynos samsung arndale arndale - Inderpal Singh <[email protected]> Active arm armv7 exynos samsung origen origen - Chander Kashyap <[email protected]> Active arm armv7 exynos samsung smdk5250 smdk5250 - Chander Kashyap <[email protected]>
include/configs/sama5d3_xplained.h new file +203 -0
203 lines not on this page · raw message
Signature · 1 line
1.8.5.2
PATCH 1/1 ARM: atmel: add sama5d3 Xplained board support
Dear Bo Shen,
Quoted 11 lines · In message <[email protected]> you wrote:
Add sama5d3 Xplained board support which use Atmel SAMA5D36 SoC. Now it supports boot from NAND flash and SD/MMC card. Features support:
- NAND flash
- SD/MMC card
- Two USB hosts
- Ethernet (one GMAC, one EMAC)Signed-off-by Bo Shen <[email protected]>---
Quoted 8 lines
board/atmel/sama5d3_xplained/Makefile | 15 ++ board/atmel/sama5d3_xplained/sama5d3_xplained.c | 130 +++++++++++++++ boards.cfg | 2 + include/configs/sama5d3_xplained.h | 203 ++++++++++++++++++++++++ 4 files changed, 350 insertions(+) create mode 100644 board/atmel/sama5d3_xplained/Makefile create mode 100644 board/atmel/sama5d3_xplained/sama5d3_xplained.c create mode 100644 include/configs/sama5d3_xplained.h
Can we please stop using the SoC name in the board config name? The board name is just that: the name of the board.
Please rename all sama5d3_xplained => xplained
Thanks.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Parkinson's Law: Work expands to fill the time alloted it.
PATCH 1/1 ARM: atmel: add sama5d3 Xplained board support
Hi Wolfgang Denk,
Quoted 23 lines · Wolfgang Denk
Dear Bo Shen,
Quoted 11 lines · In message <[email protected]> you wrote:
Add sama5d3 Xplained board support which use Atmel SAMA5D36 SoC. Now it supports boot from NAND flash and SD/MMC card. Features support:
- NAND flash
- SD/MMC card
- Two USB hosts
- Ethernet (one GMAC, one EMAC)Signed-off-by Bo Shen <[email protected]>---
Quoted 8 lines
board/atmel/sama5d3_xplained/Makefile | 15 ++ board/atmel/sama5d3_xplained/sama5d3_xplained.c | 130 +++++++++++++++ boards.cfg | 2 + include/configs/sama5d3_xplained.h | 203 ++++++++++++++++++++++++ 4 files changed, 350 insertions(+)create mode 100644 board/atmel/sama5d3_xplained/Makefile create mode 100644
board/atmel/sama5d3_xplained/sama5d3_xplained.ccreate mode 100644include/configs/sama5d3_xplained.h
Quoted 4 lines
Can we please stop using the SoC name in the board config name? The board name is just that: the name of the board.
Please rename all
sama5d3_xplained=> xplained
This board name is "SAMA5D3 Xplained", while not "Xplained". Using two words as a total as this board name. For the source code, we use low case for these two words and connect with underscore. I think no need to rename.
Quoted 6 lines
Thanks.
Best regards,
Wolfgang Denk
Best Regards,
Bo Shen
Dear Bo Shen,
Quoted 11 lines · Bo Shen
Add sama5d3 Xplained board support which use Atmel SAMA5D36 SoC. Now it supports boot from NAND flash and SD/MMC card. Features support:
- NAND flash
- SD/MMC card
- Two USB hosts
- Ethernet (one GMAC, one EMAC)Signed-off-by Bo Shen <[email protected]>---
Quoted 8 lines
board/atmel/sama5d3_xplained/Makefile | 15 ++ board/atmel/sama5d3_xplained/sama5d3_xplained.c | 130 +++++++++++++++ boards.cfg | 2 + include/configs/sama5d3_xplained.h | 203 ++++++++++++++++++++++++ 4 files changed, 350 insertions(+)create mode 100644 board/atmel/sama5d3_xplained/Makefile create mode 100644
board/atmel/sama5d3_xplained/sama5d3_xplained.ccreate mode 100644include/configs/sama5d3_xplained.h
applied with reordering of boards.cfg to u-boot-atmel/master, thanks!
Best regards,
Andreas Bie?mann