exynos: arch: add support for exynos5260 SoC

PATCH Superseded Rahul Sharma 4 participants 10 messages Apr 3, 2014 – Apr 9, 2014

Subsystems (5)

Device tree bindings Arm (32-bit) Arm sub-architectures Arm Samsung Exynos +1 more subsystems

lore

Share & tools

lore

Rahul Sharma

author

2014-04-03 10:00 UTC #0 lore raw

v7 cover exynos: arch: add support for exynos5260 SoC

From: Rahul Sharma <[email protected]>

v7:
1) Renamed board file

V6:
1) Renamed mmc nodes.
2) Removed PHY clocks from DT and put them inside clock driver.
3) Added clock-cells property for all fixed clocks.
4) Removed spdif_ext_clk fixed rate clock.

V5:
1) Removed SYSRAM related code.
2) Fixed mct clocks.
3) Add SoC and Board specifc fixed-rate clocks in respective files.

V4:
1) Removed duplicate MMC Soc property from Board file.

V3:
1) Addressed review comments from Tomasz figa.

V2:
1) Split up DT patch into SoC and Board patch.

This series is dependent on Sachin's patch
"ARM: EXYNOS: Consolidate Kconfig entries"

This series is based on Kukjin's for-next branch at
http://git.kernel.org/?p=linux/kernel/git/kgene/linux-samsung.git

Pankaj Dubey (1):
ARM: EXYNOS: initial board support for exynos5260 SoC

Rahul Sharma (2):
ARM: dts: add dts files for exynos5260 SoC
ARM: dts: add dts files for xyref5260 board

 arch/arm/boot/dts/Makefile                 |    1 +
 arch/arm/boot/dts/exynos5260-pinctrl.dtsi  |  574 ++++++++++++++++++++++++++++
 arch/arm/boot/dts/exynos5260-xyref5260.dts |  103 +++++
 arch/arm/boot/dts/exynos5260.dtsi          |  304 +++++++++++++++
 arch/arm/mach-exynos/Kconfig               |    5 +
 arch/arm/mach-exynos/exynos.c              |    1 +
 6 files changed, 988 insertions(+)
 create mode 100644 arch/arm/boot/dts/exynos5260-pinctrl.dtsi
 create mode 100644 arch/arm/boot/dts/exynos5260-xyref5260.dts
 create mode 100644 arch/arm/boot/dts/exynos5260.dtsi

Signature · 1 line

1.7.9.5

Rahul Sharma

author

2014-04-03 10:00 UTC #1 lore raw

PATCH v7 1/3 ARM: EXYNOS: initial board support for exynos5260 SoC

From: Pankaj Dubey <[email protected]>

This patch add basic arch side support for exynos5260 SoC.

Signed-off-by Pankaj Dubey <[email protected]>

Signed-off-by Rahul Sharma <[email protected]>

Reviewed-by Tomasz Figa <[email protected]>

---
 arch/arm/mach-exynos/Kconfig  |    5 +++++
 arch/arm/mach-exynos/exynos.c |    1 +
 2 files changed, 6 insertions(+)

arch/arm/mach-exynos/Kconfig +5 -0

index 5c34dc2..6c48844 100644
@@ -51,6 +51,11 @@ config SOC_EXYNOS5250
 	default y
 	depends on ARCH_EXYNOS5
 
+config SOC_EXYNOS5260
+	bool "SAMSUNG EXYNOS5260"
+	default y
+	depends on ARCH_EXYNOS5
+
 config SOC_EXYNOS5420
 	bool "SAMSUNG EXYNOS5420"
 	default y

arch/arm/mach-exynos/exynos.c +1 -0

index b567361..5324051 100644
@@ -374,6 +374,7 @@ static char const *exynos_dt_compat[] __initconst = {
 	"samsung,exynos4412",
 	"samsung,exynos5",
 	"samsung,exynos5250",
+	"samsung,exynos5260",
 	"samsung,exynos5420",
 	"samsung,exynos5440",
 	NULL

Signature · 1 line

1.7.9.5

Sachin Kamat

2014-04-07 08:38 UTC #2 lore raw

PATCH v7 1/3 ARM: EXYNOS: initial board support for exynos5260 SoC

Hi Rahul,

Quoted 3 lines · Rahul Sharma

From: Pankaj Dubey <[email protected]>
This patch add basic arch side support for exynos5260 SoC.

<snip>

arch/arm/mach-exynos/exynos.c static char const *exynos_dt_compat[] __initconst = { · line 377

Quoted 5 lines

arch/arm/mach-exynos/exynos.c +1 -0

@@ -374,6 +374,7 @@ static char const *exynos_dt_compat[] __initconst = {
        "samsung,exynos4412",
        "samsung,exynos5",
        "samsung,exynos5250",
+       "samsung,exynos5260",

I don't think we should be adding this as we do not yet have any soc specific quirk.
Compatibility to generic string, "samsung,exynos5" should be sufficient.

Signature · 2 lines

With warm regards,
Sachin

Tomasz Figa

2014-04-09 09:04 UTC #3 lore raw

PATCH v7 1/3 ARM: EXYNOS: initial board support for exynos5260 SoC

Quoted 8 lines · Sachin Kamat

Hi Rahul,
Quoted 3 lines · Rahul Sharma
From: Pankaj Dubey <[email protected]>
This patch add basic arch side support for exynos5260 SoC.
<snip>

Quoted 10 lines

arch/arm/mach-exynos/exynos.c static char const *exynos_dt_compat[] __initconst = { · line 377
Quoted 5 lines
arch/arm/mach-exynos/exynos.c +1 -0
@@ -374,6 +374,7 @@ static char const *exynos_dt_compat[] __initconst = {
         "samsung,exynos4412",
         "samsung,exynos5",
         "samsung,exynos5250",
+       "samsung,exynos5260",
I don't think we should be adding this as we do not yet have any soc specific quirk.
Compatibility to generic string, "samsung,exynos5" should be sufficient.

Yes. Unless a SoC specific quirk that needs to be handled at such low level stage emerges, there is no need to add such compatible string to the kernel.

Best regards,
Tomasz

Rahul Sharma

2014-04-09 09:15 UTC #4 lore raw

PATCH v7 1/3 ARM: EXYNOS: initial board support for exynos5260 SoC

Quoted 24 lines · Tomasz Figa

Quoted 11 lines · Sachin Kamat
Hi Rahul,
Quoted 4 lines · Rahul Sharma
From: Pankaj Dubey <[email protected]>
This patch add basic arch side support for exynos5260 SoC.
<snip>
Quoted 11 lines
arch/arm/mach-exynos/exynos.c static char const *exynos_dt_compat[] __initconst = { · line 377
Quoted 5 lines
arch/arm/mach-exynos/exynos.c +1 -0
@@ -374,6 +374,7 @@ static char const *exynos_dt_compat[] __initconst = {
         "samsung,exynos4412",
         "samsung,exynos5",
         "samsung,exynos5250",
+       "samsung,exynos5260",
I don't think we should be adding this as we do not yet have any soc specific quirk.
Compatibility to generic string, "samsung,exynos5" should be sufficient.

Quoted 3 lines

Yes. Unless a SoC specific quirk that needs to be handled at such low level stage emerges, there is no need to add such compatible string to the kernel.

Thanks Sachin, Tomasz,

I will change this.

Regards,
Rahul Sharma.

Quoted 2 lines

Best regards,
Tomasz

Rahul Sharma

author

2014-04-03 10:00 UTC #5 lore raw

PATCH v7 2/3 ARM: dts: add dts files for exynos5260 SoC

In reply to Rahul Sharma

The patch adds the dts files for exynos5260.

Signed-off-by Pankaj Dubey <[email protected]>

Signed-off-by Rahul Sharma <[email protected]>

Signed-off-by Arun Kumar K <[email protected]>

Reviewed-by Tomasz Figa <[email protected]>

---
 arch/arm/boot/dts/exynos5260-pinctrl.dtsi |  574 +++++++++++++++++++++++++++++
 arch/arm/boot/dts/exynos5260.dtsi         |  304 +++++++++++++++
 2 files changed, 878 insertions(+)
 create mode 100644 arch/arm/boot/dts/exynos5260-pinctrl.dtsi
 create mode 100644 arch/arm/boot/dts/exynos5260.dtsi

arch/arm/boot/dts/exynos5260-pinctrl.dtsi new file +574 -0

new file mode 100644
index 0000000..f6ee55e
@@ -0,0 +1,574 @@
+/*
+ * Samsung's Exynos5260 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos5260 SoC pin-mux and pin-config options are listed as device
+ * tree nodes are listed in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define PIN_PULL_NONE	0
+#define PIN_PULL_DOWN	1
+#define PIN_PULL_UP	3
+
+&pinctrl_0 {
+	gpa0: gpa0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa2: gpa2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb0: gpb0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb2: gpb2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb3: gpb3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb4: gpb4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb5: gpb5 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd2: gpd2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe0: gpe0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe1: gpe1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf0: gpf0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk0: gpk0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx0: gpx0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx1: gpx1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx2: gpx2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx3: gpx3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	uart0_data: uart0-data {
+		samsung,pins = "gpa0-0", "gpa0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart0_fctl: uart0-fctl {
+		samsung,pins = "gpa0-2", "gpa0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_data: uart1-data {
+		samsung,pins = "gpa1-0", "gpa1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_fctl: uart1-fctl {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart2_data: uart2-data {
+		samsung,pins = "gpa1-4", "gpa1-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi0_bus: spi0-bus {
+		samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi1_bus: spi1-bus {
+		samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	usb3_vbus0_en: usb3-vbus0-en {
+		samsung,pins = "gpa2-4";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2s1_bus: i2s1-bus {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+				"gpb0-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	pcm1_bus: pcm1-bus {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+				"gpb0-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	spdif1_bus: spdif1-bus {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi2_bus: spi2-bus {
+		samsung,pins = "gpb1-0", "gpb1-2", "gpb1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c0_hs_bus: i2c0-hs-bus {
+		samsung,pins = "gpb3-0", "gpb3-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c1_hs_bus: i2c1-hs-bus {
+		samsung,pins = "gpb3-2", "gpb3-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c2_hs_bus: i2c2-hs-bus {
+		samsung,pins = "gpb3-4", "gpb3-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c3_hs_bus: i2c3-hs-bus {
+		samsung,pins = "gpb3-6", "gpb3-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c4_bus: i2c4-bus {
+		samsung,pins = "gpb4-0", "gpb4-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c5_bus: i2c5-bus {
+		samsung,pins = "gpb4-2", "gpb4-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c6_bus: i2c6-bus {
+		samsung,pins = "gpb4-4", "gpb4-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c7_bus: i2c7-bus {
+		samsung,pins = "gpb4-6", "gpb4-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c8_bus: i2c8-bus {
+		samsung,pins = "gpb5-0", "gpb5-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c9_bus: i2c9-bus {
+		samsung,pins = "gpb5-2", "gpb5-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c10_bus: i2c10-bus {
+		samsung,pins = "gpb5-4", "gpb5-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c11_bus: i2c11-bus {
+		samsung,pins = "gpb5-6", "gpb5-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_gpio_a: cam-gpio-a {
+		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
+			"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
+			"gpe1-0", "gpe1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_gpio_b: cam-gpio-b {
+		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
+			"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_i2c1_bus: cam-i2c1-bus {
+		samsung,pins = "gpf0-2", "gpf0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_i2c0_bus: cam-i2c0-bus {
+		samsung,pins = "gpf0-0", "gpf0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_spi0_bus: cam-spi0-bus {
+		samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_spi1_bus: cam-spi1-bus {
+		samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_1 {
+	gpc0: gpc0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc2: gpc2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc3: gpc3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc4: gpc4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd0_clk: sd0-clk {
+		samsung,pins = "gpc0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_cmd: sd0-cmd {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus1: sd0-bus-width1 {
+		samsung,pins = "gpc0-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus4: sd0-bus-width4 {
+		samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus8: sd0-bus-width8 {
+		samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_rdqs: sd0-rdqs {
+		samsung,pins = "gpc0-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_clk: sd1-clk {
+		samsung,pins = "gpc1-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_cmd: sd1-cmd {
+		samsung,pins = "gpc1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus1: sd1-bus-width1 {
+		samsung,pins = "gpc1-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus4: sd1-bus-width4 {
+		samsung,pins = "gpc1-3", "gpc1-4", "gpc1-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus8: sd1-bus-width8 {
+		samsung,pins = "gpc4-0", "gpc4-1", "gpc4-2", "gpc4-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_clk: sd2-clk {
+		samsung,pins = "gpc2-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_cmd: sd2-cmd {
+		samsung,pins = "gpc2-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_cd: sd2-cd {
+		samsung,pins = "gpc2-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus1: sd2-bus-width1 {
+		samsung,pins = "gpc2-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus4: sd2-bus-width4 {
+		samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <3>;
+	};
+};
+
+&pinctrl_2 {
+	gpz0: gpz0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpz1: gpz1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};

arch/arm/boot/dts/exynos5260.dtsi new file +304 -0

304 lines not on this page · raw message

Signature · 1 line

1.7.9.5

Tomasz Figa

2014-04-09 10:29 UTC #6 lore raw

PATCH v7 2/3 ARM: dts: add dts files for exynos5260 SoC

Hi Rahul,

Quoted 12 lines · Rahul Sharma

The patch adds the dts files for exynos5260.
Signed-off-by Pankaj Dubey <[email protected]>
Signed-off-by Rahul Sharma <[email protected]>
Signed-off-by Arun Kumar K <[email protected]>
Reviewed-by Tomasz Figa <[email protected]>
---
  arch/arm/boot/dts/exynos5260-pinctrl.dtsi |  574 +++++++++++++++++++++++++++++
  arch/arm/boot/dts/exynos5260.dtsi         |  304 +++++++++++++++
  2 files changed, 878 insertions(+)
create mode 100644 arch/arm/boot/dts/exynos5260-pinctrl.dtsi create mode 100644 arch/arm/boot/dts/exynos5260.dtsi

[snip]

Quoted 13 lines

arch/arm/boot/dts/exynos5260.dtsi new file +7 -0

new file mode 100644
index 0000000..188a2ac
@@ -0,0 +1,304 @@
+/*
+ * SAMSUNG EXYNOS5260 SoC device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify

arch/arm/boot/dts/exynos5260.dtsi line 17

Quoted 10 lines

arch/arm/boot/dts/exynos5260.dtsi new file +10 -0

+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include "skeleton.dtsi"
+
+#include <dt-bindings/clock/exynos5260-clk.h>
+
+/ {
+	compatible = "samsung,exynos5260";

Since Sachin's patches, "samsung,exynos5" compatible should be also added, before the more specific ones.

Best regards,
Tomasz

Rahul Sharma

author

2014-04-03 10:00 UTC #7 lore raw

PATCH v7 3/3 ARM: dts: add dts files for xyref5260 board

In reply to Rahul Sharma

The patch adds the dts files for xyref5260 board which is based on Exynos5260 Evt0 sample.

Signed-off-by Rahul Sharma <[email protected]>

---
 arch/arm/boot/dts/Makefile                 |    1 +
 arch/arm/boot/dts/exynos5260-xyref5260.dts |  103 ++++++++++++++++++++++++++++
 2 files changed, 104 insertions(+)
 create mode 100644 arch/arm/boot/dts/exynos5260-xyref5260.dts

arch/arm/boot/dts/Makefile +1 -0

index b9d6a8b..477723b 100644
@@ -72,6 +72,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
 	exynos5250-arndale.dtb \
 	exynos5250-smdk5250.dtb \
 	exynos5250-snow.dtb \
+	exynos5260-xyref5260.dtb \
 	exynos5420-arndale-octa.dtb \
 	exynos5420-smdk5420.dtb \
 	exynos5440-sd5v1.dtb \

arch/arm/boot/dts/exynos5260-xyref5260.dts new file +103 -0

103 lines not on this page · raw message

Signature · 1 line

1.7.9.5

Sachin Kamat

2014-04-07 08:40 UTC #8 lore raw

PATCH v7 3/3 ARM: dts: add dts files for xyref5260 board

arch/arm/boot/dts/exynos5260-xyref5260.dts line 17

Quoted 9 lines · Rahul Sharma

The patch adds the dts files for xyref5260 board which is based on Exynos5260 Evt0 sample.
Signed-off-by Rahul Sharma <[email protected]>
---
arch/arm/boot/dts/exynos5260-xyref5260.dts new file +3 -0
+/ {
+       model = "SAMSUNG XYREF5260 EVT0 board based on EXYNOS5260";
+       compatible = "samsung,xyref5260", "samsung,exynos5260";

"samsung,exynos5260" is OK here for future compatibility (if soc specific quirk is required).
Please also add "samsung,exynos5" to compatible list.

Signature · 2 lines

With warm regards,
Sachin

Tomasz Figa

2014-04-09 10:52 UTC #9 lore raw

PATCH v7 3/3 ARM: dts: add dts files for xyref5260 board

Quoted 7 lines · Sachin Kamat

Quoted 5 lines · Rahul Sharma
The patch adds the dts files for xyref5260 board which is based on Exynos5260 Evt0 sample.
Signed-off-by Rahul Sharma <[email protected]>
---

Quoted 8 lines

arch/arm/boot/dts/exynos5260-xyref5260.dts line 17
Quoted 3 lines
arch/arm/boot/dts/exynos5260-xyref5260.dts new file +3 -0
+/ {
+       model = "SAMSUNG XYREF5260 EVT0 board based on EXYNOS5260";
+       compatible = "samsung,xyref5260", "samsung,exynos5260";
"samsung,exynos5260" is OK here for future compatibility (if soc specific quirk is required).
Please also add "samsung,exynos5" to compatible list.

Right. SoC family compatible string should be added between board and SoC model strings.

Best regards,
Tomasz