Building pjproject with python module
Hi
I already asked this question before (got no answer) and thought I had it running, but since I had to re-setup my yocto installation it runs into errors again. Maybe somebody can help me with this issue?
I am trying to bitbake pjproject including the python module. I manged to write a working .bb recipe for the latest pjproject, which compiles and installes correctly. But I also want to build the python module.
The documentation of pjproject says about building the python module:
1. Build the PJSIP libraries first with the usual "./configure && make
dep && make" commands.
2. Go to pjsip-apps/src/python directory.
3. Run *'sudo python ./setup.py install'* or just *'sudo make'*
So I guess with the working recipe I got part 1. I tried to do stepts 2 and 3 by adding the following:
do_compile_append() {
export BUILD_SYS
export HOST_SYS
export STAGING_INCDIR
export STAGING_LIBDIR
cd ${S}/pjsip-apps/src/pythonoe_runmake
}
which starts the building process but then terminates with:
|/ cc1: warning: include location "/usr/include/python2.7" is unsafe for /cross-compilation [-Wpoison-system-directories]
|/ In file included from _pjsua.c:20:0:
/|/ _pjsua.h:25:20: fatal error: Python.h: No such file or directory /
So can I build them both in one recipe and how? And if built correctly how to install the modules? I also tried to split the build into two .bb files.
Thanks for your help.
(Here is the pjproject bb)
--------
DESCRIPTION = "Open source SIP stack and media stack for presence, im/instant \
messaging, and multimedia communication"
SECTION = "libs"
HOMEPAGE = "http://www.pjsip.org/"
LICENSE = "GPLv2"LIC_FILES_CHKSUM = "file://COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263" DEPENDS = "alsa-lib openssl python"
PARALLEL_MAKE = ""
SRC_URI = "http://www.pjsip.org/release/${PV}/pjproject-${PV}.tar.bz2 " SRC_URI[md5sum] = "6ed4bb7750c827dc1d881e209a3b62db"
SRC_URI[sha256sum] = "da1933336b38b65ff2254bed05ea1076531b16915777a252ea999cf7f3284cb3" S = "${WORKDIR}/pjproject-${PV}"
inherit autotools pkgconfig
EXTRA_OECONF += "STAGING_DIR=${STAGING_DIR_NATIVE}"
do_configure_prepend () {
export LD="${CC}"
}do_compile_prepend() {
oe_runmake dep
}
do_install_prepend() {
install -d ${D}/usr/bin
install -m 755 ${S}/pjsip-apps/bin/pj* ${D}/usr/bin
}Quoted 40 lines · Jens Lucius
Hi
I already asked this question before (got no answer) and thought I had it running, but since I had to re-setup my yocto installation it runs into errors again. Maybe somebody can help me with this issue?
I am trying to bitbake pjproject including the python module. I manged to write a working .bb recipe for the latest pjproject, which compiles and installes correctly. But I also want to build the python module.
The documentation of pjproject says about building the python module:
1. Build the PJSIP libraries first with the usual "./configure && make
dep && make" commands.2. Go to pjsip-apps/src/python directory.
3. Run *'sudo python ./setup.py install'* or just *'sudo make'*So I guess with the working recipe I got part 1. I tried to do stepts 2 and 3 by adding the following:
do_compile_append(){
exportBUILD_SYS
exportHOST_SYS
exportSTAGING_INCDIR
exportSTAGING_LIBDIRcd ${S}/pjsip-apps/src/python
oe_runmake
}which starts the building process but then terminates with:
|/ cc1: warning: include location "
/usr/include/python2.7" is unsafe for /cross-compilation [-Wpoison-system-directories]
|/ In file included from _pjsua.c:20:0:
/|/ _pjsua.h:25:20: fatal error:Python.h: No such file or directory /
So can I build them both in one recipe and how? And if built correctly how to install the modules? I also tried to split the build into two .bb files.
Quoted 1 line
Thanks for your help.
Try adding 'inherit pythonnative' to your recipe
Quoted 39 lines
(Here is the pjproject bb)
--------
DESCRIPTION = "Open source SIP stack and media stack for presence, im/instant \
messaging, and multimedia communication"
SECTION = "libs"
HOMEPAGE ="http://www.pjsip.org/"
LICENSE = "GPLv2"LIC_FILES_CHKSUM="file://COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263" DEPENDS = "alsa-lib openssl python"
PARALLEL_MAKE= ""
SRC_URI="http://www.pjsip.org/release/${PV}/pjproject-${PV}.tar.bz2" SRC_URI[md5sum] = "6ed4bb7750c827dc1d881e209a3b62db"
SRC_URI[sha256sum] = "da1933336b38b65ff2254bed05ea1076531b16915777a252ea999cf7f3284cb3" S = "${WORKDIR}/pjproject-${PV}"inherit autotools pkgconfig
EXTRA_OECONF+= "STAGING_DIR=${STAGING_DIR_NATIVE}"do_configure_prepend () { export LD="${CC}" }
do_compile_prepend(){
oe_runmakedep
}do_install_prepend() { install -d ${D}/usr/bin install -m 755 ${S}/pjsip-apps/bin/pj* ${D}/usr/bin }
Signature · 4 lines
------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------
Now I am getting this error:
| Traceback (most recent call last):
| File "setup.py", line 111, in <module>
| py_modules=["pjsua"]
| File "/home/server/poky-daisy-11.0.0/build/tmp/sysroots/i686-linux/usr/lib/python2.7/distutils/core.py", line 152, in setup
| dist.run_commands()
| File "/home/server/poky-daisy-11.0.0/build/tmp/sysroots/i686-linux/usr/lib/python2.7/distutils/dist.py", line 953, in run_commands
| self.run_command(cmd)
| File "/home/server/poky-daisy-11.0.0/build/tmp/sysroots/i686-linux/usr/lib/python2.7/distutils/dist.py", line 972, in run_command
| cmd_obj.run()
| File "/home/server/poky-daisy-11.0.0/build/tmp/sysroots/i686-linux/usr/lib/python2.7/distutils/command/build.py", line 127, in run
| self.run_command(cmd_name)
| File "/home/server/poky-daisy-11.0.0/build/tmp/sysroots/i686-linux/usr/lib/python2.7/distutils/cmd.py", line 326, in run_command
| self.distribution.run_command(command)
| File "/home/server/poky-daisy-11.0.0/build/tmp/sysroots/i686-linux/usr/lib/python2.7/distutils/dist.py", line 970, in run_command
| cmd_obj = self.get_command_obj(command)
| File "/home/server/poky-daisy-11.0.0/build/tmp/sysroots/i686-linux/usr/lib/python2.7/distutils/dist.py", line 845, in get_command_obj
| klass = self.get_command_class(command)
| File "/home/server/poky-daisy-11.0.0/build/tmp/sysroots/i686-linux/usr/lib/python2.7/distutils/dist.py", line 815, in get_command_class
| __import__ (module_name)
| File "/home/server/poky-daisy-11.0.0/build/tmp/sysroots/i686-linux/usr/lib/python2.7/distutils/command/build_ext.py", line 16, in <module>
| from distutils.sysconfig import customize_compiler, get_python_version
| File "/home/server/poky-daisy-11.0.0/build/tmp/sysroots/i686-linux/usr/lib/python2.7/distutils/sysconfig.py", line 22, in <module>
| PREFIX = os.path.normpath(sys.prefix).replace( os.getenv("BUILD_SYS"), os.getenv("HOST_SYS") )
| TypeError: expected a character buffer object
| make: *** [all] Error 1
| ERROR: oe_runmake failedAm 22.05.2014 17:11, schrieb Gary Thomas:
Quoted 85 lines · Jens Lucius
Quoted 40 lines
Hi
I already asked this question before (got no answer) and thought I had it running, but since I had to re-setup my yocto installation it runs into errors again. Maybe somebody can help me with this issue?
I am trying to bitbake pjproject including the python module. I manged to write a working .bb recipe for the latest pjproject, which compiles and installes correctly. But I also want to build the python module.
The documentation of pjproject says about building the python module:
1. Build the PJSIP libraries first with the usual "./configure && make
dep && make" commands.2. Go to pjsip-apps/src/python directory.
3. Run *'sudo python ./setup.py install'* or just *'sudo make'*So I guess with the working recipe I got part 1. I tried to do stepts 2 and 3 by adding the following:
do_compile_append(){
exportBUILD_SYS
exportHOST_SYS
exportSTAGING_INCDIR
exportSTAGING_LIBDIRcd ${S}/pjsip-apps/src/python
oe_runmake
}which starts the building process but then terminates with:
|/ cc1: warning: include location "
/usr/include/python2.7" is unsafe for /cross-compilation [-Wpoison-system-directories]
|/ In file included from _pjsua.c:20:0:
/|/ _pjsua.h:25:20: fatal error:Python.h: No such file or directory /
So can I build them both in one recipe and how? And if built correctly how to install the modules? I also tried to split the build into two .bb files.Quoted 1 line
Thanks for your help.
Try adding 'inherit pythonnative' to your recipe
Quoted 39 lines
(Here is the pjproject bb)
--------
DESCRIPTION = "Open source SIP stack and media stack for presence, im/instant \
messaging, and multimedia communication"
SECTION = "libs"
HOMEPAGE ="http://www.pjsip.org/"
LICENSE = "GPLv2"LIC_FILES_CHKSUM="file://COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263" DEPENDS = "alsa-lib openssl python"
PARALLEL_MAKE= ""
SRC_URI="http://www.pjsip.org/release/${PV}/pjproject-${PV}.tar.bz2" SRC_URI[md5sum] = "6ed4bb7750c827dc1d881e209a3b62db"
SRC_URI[sha256sum] = "da1933336b38b65ff2254bed05ea1076531b16915777a252ea999cf7f3284cb3" S = "${WORKDIR}/pjproject-${PV}"inherit autotools pkgconfig
EXTRA_OECONF+= "STAGING_DIR=${STAGING_DIR_NATIVE}"do_configure_prepend () { export LD="${CC}" }
do_compile_prepend(){
oe_runmakedep
}do_install_prepend() { install -d ${D}/usr/bin install -m 755 ${S}/pjsip-apps/bin/pj* ${D}/usr/bin }
Quoted 29 lines · Jens Lucius
Now I am getting this error:
| Traceback (most recent call last): | File "setup.py", line 111, in <module> | py_modules=["pjsua"] | File "/home/server/poky-daisy-11.0.0/build/tmp/sysroots/i686-linux/usr/lib/python2.7/distutils/core.py", line 152, in setup | dist.run_commands() | File "/home/server/poky-daisy-11.0.0/build/tmp/sysroots/i686-linux/usr/lib/python2.7/distutils/dist.py", line 953, in run_commands | self.run_command(cmd) | File "/home/server/poky-daisy-11.0.0/build/tmp/sysroots/i686-linux/usr/lib/python2.7/distutils/dist.py", line 972, in run_command | cmd_obj.run() | File "/home/server/poky-daisy-11.0.0/build/tmp/sysroots/i686-linux/usr/lib/python2.7/distutils/command/build.py", line 127, in run | self.run_command(cmd_name) | File "/home/server/poky-daisy-11.0.0/build/tmp/sysroots/i686-linux/usr/lib/python2.7/distutils/cmd.py", line 326, in run_command | self.distribution.run_command(command) | File "/home/server/poky-daisy-11.0.0/build/tmp/sysroots/i686-linux/usr/lib/python2.7/distutils/dist.py", line 970, in run_command | cmd_obj = self.get_command_obj(command) | File "/home/server/poky-daisy-11.0.0/build/tmp/sysroots/i686-linux/usr/lib/python2.7/distutils/dist.py", line 845, in get_command_obj | klass = self.get_command_class(command) | File "/home/server/poky-daisy-11.0.0/build/tmp/sysroots/i686-linux/usr/lib/python2.7/distutils/dist.py", line 815, in get_command_class | __import__ (module_name) | File "/home/server/poky-daisy-11.0.0/build/tmp/sysroots/i686-linux/usr/lib/python2.7/distutils/command/build_ext.py", line 16, in <module> | from distutils.sysconfig import customize_compiler, get_python_version | File "/home/server/poky-daisy-11.0.0/build/tmp/sysroots/i686-linux/usr/lib/python2.7/distutils/sysconfig.py", line 22, in <module> | PREFIX = os.path.normpath(sys.prefix).replace( os.getenv("BUILD_SYS"), os.getenv("HOST_SYS") ) | TypeError: expected a character buffer object | make: *** [all] Error 1 | ERROR: oe_runmake failed
Quoted 27 lines
Am 22.05.2014 17:11, schrieb Gary Thomas:
Quoted 26 lines · Jens Lucius
Quoted 25 lines
Hi
I already asked this question before (got no answer) and thought I had it running, but since I had to re-setup my yocto installation it runs into errors again. Maybe somebody can help me with this issue?
I am trying to bitbake pjproject including the python module. I manged to write a working .bb recipe for the latest pjproject, which compiles and installes correctly. But I also want to build the python module.
The documentation of pjproject says about building the python module:
1. Build the PJSIP libraries first with the usual "./configure && make
dep && make" commands.2. Go to pjsip-apps/src/python directory.
3. Run *'sudo python ./setup.py install'* or just *'sudo make'*So I guess with the working recipe I got part 1. I tried to do stepts 2 and 3 by adding the following:
do_compile_append(){
exportBUILD_SYS
exportHOST_SYS
exportSTAGING_INCDIR
exportSTAGING_LIBDIR
Put these exports at the outermost level of your recipe, not inside any function, i.e. like this:
EXTRA_OECONF += "STAGING_DIR=${STAGING_DIR_NATIVE}"
export BUILD_SYS
export HOST_SYS
export STAGING_INCDIR
export STAGING_LIBDIR
Quoted 60 lines
Quoted 59 lines
Quoted 15 lines
cd ${S}/pjsip-apps/src/python
oe_runmake
}which starts the building process but then terminates with:
|/ cc1: warning: include location "
/usr/include/python2.7" is unsafe for /cross-compilation [-Wpoison-system-directories]
|/ In file included from _pjsua.c:20:0:
/|/ _pjsua.h:25:20: fatal error:Python.h: No such file or directory /
So can I build them both in one recipe and how? And if built correctly how to install the modules? I also tried to split the build into two .bb files.Quoted 1 line
Thanks for your help.
Try adding 'inherit pythonnative' to your recipe
Quoted 39 lines
(Here is the pjproject bb)
--------
DESCRIPTION = "Open source SIP stack and media stack for presence, im/instant \
messaging, and multimedia communication"
SECTION = "libs"
HOMEPAGE ="http://www.pjsip.org/"
LICENSE = "GPLv2"LIC_FILES_CHKSUM="file://COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263" DEPENDS = "alsa-lib openssl python"
PARALLEL_MAKE= ""
SRC_URI="http://www.pjsip.org/release/${PV}/pjproject-${PV}.tar.bz2" SRC_URI[md5sum] = "6ed4bb7750c827dc1d881e209a3b62db"
SRC_URI[sha256sum] = "da1933336b38b65ff2254bed05ea1076531b16915777a252ea999cf7f3284cb3" S = "${WORKDIR}/pjproject-${PV}"inherit autotools pkgconfig
EXTRA_OECONF+= "STAGING_DIR=${STAGING_DIR_NATIVE}"do_configure_prepend () { export LD="${CC}" }
do_compile_prepend(){
oe_runmakedep
}do_install_prepend() { install -d ${D}/usr/bin install -m 755 ${S}/pjsip-apps/bin/pj* ${D}/usr/bin }
Signature · 4 lines
------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------
Quoted 70 lines
Put these exports at the outermost level of your recipe, not inside any function, i.e. like this:
EXTRA_OECONF+= "STAGING_DIR=${STAGING_DIR_NATIVE}"
exportBUILD_SYS
exportHOST_SYS
exportSTAGING_INCDIR
exportSTAGING_LIBDIRQuoted 60 lines
Quoted 59 lines
Quoted 15 lines
cd ${S}/pjsip-apps/src/python
oe_runmake
}which starts the building process but then terminates with:
|/ cc1: warning: include location "
/usr/include/python2.7" is unsafe for /cross-compilation [-Wpoison-system-directories]
|/ In file included from _pjsua.c:20:0:
/|/ _pjsua.h:25:20: fatal error:Python.h: No such file or directory /
So can I build them both in one recipe and how? And if built correctly how to install the modules? I also tried to split the build into two .bb files.Quoted 1 line
Thanks for your help.
Try adding 'inherit pythonnative' to your recipe
Quoted 39 lines
(Here is the pjproject bb)
--------
DESCRIPTION = "Open source SIP stack and media stack for presence, im/instant \
messaging, and multimedia communication"
SECTION = "libs"
HOMEPAGE ="http://www.pjsip.org/"
LICENSE = "GPLv2"LIC_FILES_CHKSUM="file://COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263" DEPENDS = "alsa-lib openssl python"
PARALLEL_MAKE= ""
SRC_URI="http://www.pjsip.org/release/${PV}/pjproject-${PV}.tar.bz2" SRC_URI[md5sum] = "6ed4bb7750c827dc1d881e209a3b62db"
SRC_URI[sha256sum] = "da1933336b38b65ff2254bed05ea1076531b16915777a252ea999cf7f3284cb3" S = "${WORKDIR}/pjproject-${PV}"inherit autotools pkgconfig
EXTRA_OECONF+= "STAGING_DIR=${STAGING_DIR_NATIVE}"do_configure_prepend () { export LD="${CC}" }
do_compile_prepend(){
oe_runmakedep
}do_install_prepend() { install -d ${D}/usr/bin install -m 755 ${S}/pjsip-apps/bin/pj* ${D}/usr/bin }
Still did not quite work. After a little bit of searching, I added --enable-shared to EXTRA_OECONF and now it works (just had to ship the files manually as they are not installed automatically. Thanks for your help.