Skip to contentSkip to conversation

Building pjproject with python module

DISCUSSION Jens Lucius 2 participants 5 messages May 22, 2014 – May 24, 2014

lore
Share & tools
lore
#0 lore raw

Hi

I already asked this question before (got no answer) and thought I had it running, but since I had to re-setup my yocto installation it runs into errors again. Maybe somebody can help me with this issue?

I am trying to bitbake pjproject including the python module. I manged to write a working .bb recipe for the latest pjproject, which compiles and installes correctly. But I also want to build the python module.

The documentation of pjproject says about building the python module:

1. Build the PJSIP libraries first with the usual "./configure && make

    dep && make" commands.

2. Go to pjsip-apps/src/python directory.
3. Run *'sudo python ./setup.py install'* or just *'sudo make'*

So I guess with the working recipe I got part 1. I tried to do stepts 2 and 3 by adding the following:

do_compile_append() {
export BUILD_SYS
export HOST_SYS
export STAGING_INCDIR
export STAGING_LIBDIR

cd ${S}/pjsip-apps/src/python
oe_runmake
}

which starts the building process but then terminates with:

|/ cc1: warning: include location "/usr/include/python2.7" is unsafe for /cross-compilation [-Wpoison-system-directories]
|/ In file included from _pjsua.c:20:0:
/|/ _pjsua.h:25:20: fatal error: Python.h: No such file or directory /
So can I build them both in one recipe and how? And if built correctly how to install the modules? I also tried to split the build into two .bb files.

Thanks for your help.

(Here is the pjproject bb)
--------
DESCRIPTION = "Open source SIP stack and media stack for presence, im/instant \
messaging, and multimedia communication"
SECTION = "libs"
HOMEPAGE = "http://www.pjsip.org/"
LICENSE = "GPLv2"
LIC_FILES_CHKSUM = "file://COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263" DEPENDS = "alsa-lib openssl python"

PARALLEL_MAKE = ""

SRC_URI = "http://www.pjsip.org/release/${PV}/pjproject-${PV}.tar.bz2 " SRC_URI[md5sum] = "6ed4bb7750c827dc1d881e209a3b62db"
SRC_URI[sha256sum] = "da1933336b38b65ff2254bed05ea1076531b16915777a252ea999cf7f3284cb3" S = "${WORKDIR}/pjproject-${PV}"

inherit autotools pkgconfig

EXTRA_OECONF += "STAGING_DIR=${STAGING_DIR_NATIVE}"

do_configure_prepend () {
        export LD="${CC}"
}

do_compile_prepend() {
oe_runmake dep
}

do_install_prepend() {
    install -d ${D}/usr/bin
    install -m 755 ${S}/pjsip-apps/bin/pj* ${D}/usr/bin
}
#1 lore raw
Quoted 40 lines · Jens Lucius

Hi

I already asked this question before (got no answer) and thought I had it running, but since I had to re-setup my yocto installation it runs into errors again. Maybe somebody can help me with this issue?

I am trying to bitbake pjproject including the python module. I manged to write a working .bb recipe for the latest pjproject, which compiles and installes correctly. But I also want to build the python module.

The documentation of pjproject says about building the python module:

1. Build the PJSIP libraries first with the usual "./configure && make

     dep && make" commands.

2. Go to pjsip-apps/src/python directory.
3. Run *'sudo python ./setup.py install'* or just *'sudo make'*

So I guess with the working recipe I got part 1. I tried to do stepts 2 and 3 by adding the following:

do_compile_append() {
export BUILD_SYS
export HOST_SYS
export STAGING_INCDIR
export STAGING_LIBDIR

cd ${S}/pjsip-apps/src/python
oe_runmake
}

which starts the building process but then terminates with:

|/ cc1: warning: include location "/usr/include/python2.7" is unsafe for /cross-compilation [-Wpoison-system-directories]
|/ In file included from _pjsua.c:20:0:
/|/ _pjsua.h:25:20: fatal error: Python.h: No such file or directory /
So can I build them both in one recipe and how? And if built correctly how to install the modules? I also tried to split the build into two .bb files.

Quoted 1 line

Thanks for your help.

Try adding 'inherit pythonnative' to your recipe

Quoted 39 lines

(Here is the pjproject bb)
--------
DESCRIPTION = "Open source SIP stack and media stack for presence, im/instant \
messaging, and multimedia communication"
SECTION = "libs"
HOMEPAGE ="http://www.pjsip.org/"
LICENSE = "GPLv2"
LIC_FILES_CHKSUM ="file://COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263" DEPENDS = "alsa-lib openssl python"

PARALLEL_MAKE = ""

SRC_URI ="http://www.pjsip.org/release/${PV}/pjproject-${PV}.tar.bz2" SRC_URI[md5sum] = "6ed4bb7750c827dc1d881e209a3b62db"
SRC_URI[sha256sum] = "da1933336b38b65ff2254bed05ea1076531b16915777a252ea999cf7f3284cb3" S = "${WORKDIR}/pjproject-${PV}"

inherit autotools pkgconfig

EXTRA_OECONF += "STAGING_DIR=${STAGING_DIR_NATIVE}"

do_configure_prepend () {
         export LD="${CC}"
}

do_compile_prepend() {
oe_runmake dep
}

do_install_prepend() {
     install -d ${D}/usr/bin
     install -m 755 ${S}/pjsip-apps/bin/pj* ${D}/usr/bin
}
Signature · 4 lines
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------
#2 lore raw

Now I am getting this error:

| Traceback (most recent call last):
|   File "setup.py", line 111, in <module>
|     py_modules=["pjsua"]
|   File "/home/server/poky-daisy-11.0.0/build/tmp/sysroots/i686-linux/usr/lib/python2.7/distutils/core.py", line 152, in setup
|     dist.run_commands()
|   File "/home/server/poky-daisy-11.0.0/build/tmp/sysroots/i686-linux/usr/lib/python2.7/distutils/dist.py", line 953, in run_commands
|     self.run_command(cmd)
|   File "/home/server/poky-daisy-11.0.0/build/tmp/sysroots/i686-linux/usr/lib/python2.7/distutils/dist.py", line 972, in run_command
|     cmd_obj.run()
|   File "/home/server/poky-daisy-11.0.0/build/tmp/sysroots/i686-linux/usr/lib/python2.7/distutils/command/build.py", line 127, in run
|     self.run_command(cmd_name)
|   File "/home/server/poky-daisy-11.0.0/build/tmp/sysroots/i686-linux/usr/lib/python2.7/distutils/cmd.py", line 326, in run_command
|     self.distribution.run_command(command)
|   File "/home/server/poky-daisy-11.0.0/build/tmp/sysroots/i686-linux/usr/lib/python2.7/distutils/dist.py", line 970, in run_command
|     cmd_obj = self.get_command_obj(command)
|   File "/home/server/poky-daisy-11.0.0/build/tmp/sysroots/i686-linux/usr/lib/python2.7/distutils/dist.py", line 845, in get_command_obj
|     klass = self.get_command_class(command)
|   File "/home/server/poky-daisy-11.0.0/build/tmp/sysroots/i686-linux/usr/lib/python2.7/distutils/dist.py", line 815, in get_command_class
|     __import__ (module_name)
|   File "/home/server/poky-daisy-11.0.0/build/tmp/sysroots/i686-linux/usr/lib/python2.7/distutils/command/build_ext.py", line 16, in <module>
|     from distutils.sysconfig import customize_compiler, get_python_version
|   File "/home/server/poky-daisy-11.0.0/build/tmp/sysroots/i686-linux/usr/lib/python2.7/distutils/sysconfig.py", line 22, in <module>
|     PREFIX = os.path.normpath(sys.prefix).replace( os.getenv("BUILD_SYS"), os.getenv("HOST_SYS") )
| TypeError: expected a character buffer object
| make: *** [all] Error 1
| ERROR: oe_runmake failed

Am 22.05.2014 17:11, schrieb Gary Thomas:

Quoted 85 lines · Jens Lucius
Quoted 40 lines

Hi

I already asked this question before (got no answer) and thought I had it running, but since I had to re-setup my yocto installation it runs into errors again. Maybe somebody can help me with this issue?

I am trying to bitbake pjproject including the python module. I manged to write a working .bb recipe for the latest pjproject, which compiles and installes correctly. But I also want to build the python module.

The documentation of pjproject says about building the python module:

1. Build the PJSIP libraries first with the usual "./configure && make

     dep && make" commands.

2. Go to pjsip-apps/src/python directory.
3. Run *'sudo python ./setup.py install'* or just *'sudo make'*

So I guess with the working recipe I got part 1. I tried to do stepts 2 and 3 by adding the following:

do_compile_append() {
export BUILD_SYS
export HOST_SYS
export STAGING_INCDIR
export STAGING_LIBDIR

cd ${S}/pjsip-apps/src/python
oe_runmake
}

which starts the building process but then terminates with:

|/ cc1: warning: include location "/usr/include/python2.7" is unsafe for /cross-compilation [-Wpoison-system-directories]
|/ In file included from _pjsua.c:20:0:
/|/ _pjsua.h:25:20: fatal error: Python.h: No such file or directory /
So can I build them both in one recipe and how? And if built correctly how to install the modules? I also tried to split the build into two .bb files.

Quoted 1 line

Thanks for your help.

Try adding 'inherit pythonnative' to your recipe

Quoted 39 lines

(Here is the pjproject bb)
--------
DESCRIPTION = "Open source SIP stack and media stack for presence, im/instant \
messaging, and multimedia communication"
SECTION = "libs"
HOMEPAGE ="http://www.pjsip.org/"
LICENSE = "GPLv2"
LIC_FILES_CHKSUM ="file://COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263" DEPENDS = "alsa-lib openssl python"

PARALLEL_MAKE = ""

SRC_URI ="http://www.pjsip.org/release/${PV}/pjproject-${PV}.tar.bz2" SRC_URI[md5sum] = "6ed4bb7750c827dc1d881e209a3b62db"
SRC_URI[sha256sum] = "da1933336b38b65ff2254bed05ea1076531b16915777a252ea999cf7f3284cb3" S = "${WORKDIR}/pjproject-${PV}"

inherit autotools pkgconfig

EXTRA_OECONF += "STAGING_DIR=${STAGING_DIR_NATIVE}"

do_configure_prepend () {
         export LD="${CC}"
}

do_compile_prepend() {
oe_runmake dep
}

do_install_prepend() {
     install -d ${D}/usr/bin
     install -m 755 ${S}/pjsip-apps/bin/pj* ${D}/usr/bin
}
#3 lore raw
Quoted 29 lines · Jens Lucius

Now I am getting this error:

| Traceback (most recent call last):
|   File "setup.py", line 111, in <module>
|     py_modules=["pjsua"]
|   File "/home/server/poky-daisy-11.0.0/build/tmp/sysroots/i686-linux/usr/lib/python2.7/distutils/core.py", line 152, in setup
|     dist.run_commands()
|   File "/home/server/poky-daisy-11.0.0/build/tmp/sysroots/i686-linux/usr/lib/python2.7/distutils/dist.py", line 953, in run_commands
|     self.run_command(cmd)
|   File "/home/server/poky-daisy-11.0.0/build/tmp/sysroots/i686-linux/usr/lib/python2.7/distutils/dist.py", line 972, in run_command
|     cmd_obj.run()
|   File "/home/server/poky-daisy-11.0.0/build/tmp/sysroots/i686-linux/usr/lib/python2.7/distutils/command/build.py", line 127, in run
|     self.run_command(cmd_name)
|   File "/home/server/poky-daisy-11.0.0/build/tmp/sysroots/i686-linux/usr/lib/python2.7/distutils/cmd.py", line 326, in run_command
|     self.distribution.run_command(command)
|   File "/home/server/poky-daisy-11.0.0/build/tmp/sysroots/i686-linux/usr/lib/python2.7/distutils/dist.py", line 970, in run_command
|     cmd_obj = self.get_command_obj(command)
|   File "/home/server/poky-daisy-11.0.0/build/tmp/sysroots/i686-linux/usr/lib/python2.7/distutils/dist.py", line 845, in get_command_obj
|     klass = self.get_command_class(command)
|   File "/home/server/poky-daisy-11.0.0/build/tmp/sysroots/i686-linux/usr/lib/python2.7/distutils/dist.py", line 815, in get_command_class
|     __import__ (module_name)
|   File "/home/server/poky-daisy-11.0.0/build/tmp/sysroots/i686-linux/usr/lib/python2.7/distutils/command/build_ext.py", line 16, in <module>
|     from distutils.sysconfig import customize_compiler, get_python_version
|   File "/home/server/poky-daisy-11.0.0/build/tmp/sysroots/i686-linux/usr/lib/python2.7/distutils/sysconfig.py", line 22, in <module>
|     PREFIX = os.path.normpath(sys.prefix).replace( os.getenv("BUILD_SYS"), os.getenv("HOST_SYS") )
| TypeError: expected a character buffer object
| make: *** [all] Error 1
| ERROR: oe_runmake failed
Quoted 27 lines

Am 22.05.2014 17:11, schrieb Gary Thomas:

Quoted 26 lines · Jens Lucius
Quoted 25 lines

Hi

I already asked this question before (got no answer) and thought I had it running, but since I had to re-setup my yocto installation it runs into errors again. Maybe somebody can help me with this issue?

I am trying to bitbake pjproject including the python module. I manged to write a working .bb recipe for the latest pjproject, which compiles and installes correctly. But I also want to build the python module.

The documentation of pjproject says about building the python module:

1. Build the PJSIP libraries first with the usual "./configure && make

     dep && make" commands.

2. Go to pjsip-apps/src/python directory.
3. Run *'sudo python ./setup.py install'* or just *'sudo make'*

So I guess with the working recipe I got part 1. I tried to do stepts 2 and 3 by adding the following:

do_compile_append() {
export BUILD_SYS
export HOST_SYS
export STAGING_INCDIR
export STAGING_LIBDIR

Put these exports at the outermost level of your recipe, not inside any function, i.e. like this:
EXTRA_OECONF += "STAGING_DIR=${STAGING_DIR_NATIVE}"
export BUILD_SYS
export HOST_SYS
export STAGING_INCDIR
export STAGING_LIBDIR

Quoted 60 lines
Quoted 59 lines
Quoted 15 lines

cd ${S}/pjsip-apps/src/python
oe_runmake
}

which starts the building process but then terminates with:

|/ cc1: warning: include location "/usr/include/python2.7" is unsafe for /cross-compilation [-Wpoison-system-directories]
|/ In file included from _pjsua.c:20:0:
/|/ _pjsua.h:25:20: fatal error: Python.h: No such file or directory /
So can I build them both in one recipe and how? And if built correctly how to install the modules? I also tried to split the build into two .bb files.

Quoted 1 line

Thanks for your help.

Try adding 'inherit pythonnative' to your recipe

Quoted 39 lines

(Here is the pjproject bb)
--------
DESCRIPTION = "Open source SIP stack and media stack for presence, im/instant \
messaging, and multimedia communication"
SECTION = "libs"
HOMEPAGE ="http://www.pjsip.org/"
LICENSE = "GPLv2"
LIC_FILES_CHKSUM ="file://COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263" DEPENDS = "alsa-lib openssl python"

PARALLEL_MAKE = ""

SRC_URI ="http://www.pjsip.org/release/${PV}/pjproject-${PV}.tar.bz2" SRC_URI[md5sum] = "6ed4bb7750c827dc1d881e209a3b62db"
SRC_URI[sha256sum] = "da1933336b38b65ff2254bed05ea1076531b16915777a252ea999cf7f3284cb3" S = "${WORKDIR}/pjproject-${PV}"

inherit autotools pkgconfig

EXTRA_OECONF += "STAGING_DIR=${STAGING_DIR_NATIVE}"

do_configure_prepend () {
         export LD="${CC}"
}

do_compile_prepend() {
oe_runmake dep
}

do_install_prepend() {
     install -d ${D}/usr/bin
     install -m 755 ${S}/pjsip-apps/bin/pj* ${D}/usr/bin
}
Signature · 4 lines
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------
#4 lore raw
Quoted 70 lines

Put these exports at the outermost level of your recipe, not inside any function, i.e. like this:
EXTRA_OECONF += "STAGING_DIR=${STAGING_DIR_NATIVE}"
export BUILD_SYS
export HOST_SYS
export STAGING_INCDIR
export STAGING_LIBDIR

Quoted 60 lines
Quoted 59 lines
Quoted 15 lines

cd ${S}/pjsip-apps/src/python
oe_runmake
}

which starts the building process but then terminates with:

|/ cc1: warning: include location "/usr/include/python2.7" is unsafe for /cross-compilation [-Wpoison-system-directories]
|/ In file included from _pjsua.c:20:0:
/|/ _pjsua.h:25:20: fatal error: Python.h: No such file or directory /
So can I build them both in one recipe and how? And if built correctly how to install the modules? I also tried to split the build into two .bb files.

Quoted 1 line

Thanks for your help.

Try adding 'inherit pythonnative' to your recipe

Quoted 39 lines

(Here is the pjproject bb)
--------
DESCRIPTION = "Open source SIP stack and media stack for presence, im/instant \
messaging, and multimedia communication"
SECTION = "libs"
HOMEPAGE ="http://www.pjsip.org/"
LICENSE = "GPLv2"
LIC_FILES_CHKSUM ="file://COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263" DEPENDS = "alsa-lib openssl python"

PARALLEL_MAKE = ""

SRC_URI ="http://www.pjsip.org/release/${PV}/pjproject-${PV}.tar.bz2" SRC_URI[md5sum] = "6ed4bb7750c827dc1d881e209a3b62db"
SRC_URI[sha256sum] = "da1933336b38b65ff2254bed05ea1076531b16915777a252ea999cf7f3284cb3" S = "${WORKDIR}/pjproject-${PV}"

inherit autotools pkgconfig

EXTRA_OECONF += "STAGING_DIR=${STAGING_DIR_NATIVE}"

do_configure_prepend () {
         export LD="${CC}"
}

do_compile_prepend() {
oe_runmake dep
}

do_install_prepend() {
     install -d ${D}/usr/bin
     install -m 755 ${S}/pjsip-apps/bin/pj* ${D}/usr/bin
}

Still did not quite work. After a little bit of searching, I added --enable-shared to EXTRA_OECONF and now it works (just had to ship the files manually as they are not installed automatically. Thanks for your help.