Skip to contentSkip to conversation

How to select defconfig for kernel build with yocto/bitbake

DISCUSSION Dr. Markus Eich 3 participants 11 messages Jul 9, 2014 – Jul 11, 2014

lore
Share & tools
lore
#0 lore raw

Dear all,

I work on the process to compile odroid xu kernel with yocto/bitbake

In the kernel sources (from hardkernel) I have the corresponding defconfig file, i.e. in the git folder /arch/arm/configs/odroidxu_ubuntu_defconfig.

How can I tell bitbake in my recipe to use "odroidxu_ubuntu_defconfig"?

My recipe looks as follow:

===
require recipes-kernel/linux/linux-yocto.inc

KERNEL_IMAGETYPE = "uImage"

COMPATIBLE_MACHINE = "odroid-xu"

LINUX_VERSION = "3.4.91"
LINUX_VERSION_EXTENSION = "-custom"

FILESEXTRAPATHS_prepend := "${THISDIR}/linux-hardkernel-3.4:"

S = "${WORKDIR}/git"

# from where to fetch the kernel
KERNEL_REPO_OWNER ??= "hardkernel"
KERNEL_REPO_URI ??= "git://github.com/${KERNEL_REPO_OWNER}/linux.git"
KBRANCH = "odroidxu-3.4.y"

SRCREV = "${AUTOREV}"

KV = "3.4.91"
PV = "${KV}+gitr${SRCPV}"
LOCALVERSION ?= ""

SRC_URI = " \
${KERNEL_REPO_URI};nocheckout=1;branch=${KBRANCH} \
"

PACKAGES =+ "kernel-headers" FILES_kernel-headers = "${exec_prefix}/src/linux*"
===

Cheers,

Markus

Signature · 35 lines
Dr.-Ing. Markus Eich

 Senior Researcher
 Marine Inspection Robotics
 Space Robotics
 
 Besuchsadresse der Nebengeschäftstelle:
 DFKI GmbH
 Robotics Innovation Center
 Robert-Hooke-Straße 5
 28359 Bremen, Germany
 
 Postadresse der Hauptgeschäftsstelle Standort Bremen:
 DFKI GmbH
 Robotics Innovation Center
 Robert-Hooke-Straße 1
 28359 Bremen, Germany

 Tel.:     +49 421 178 45-4105
 Zentrale: +49 421 178 45-0
 Fax:      +49 421 178 45-4150 (Faxe bitte namentlich kennzeichnen)
 E-Mail:   [email protected]

 Weitere Informationen: http://www.dfki.de/robotik
 -----------------------------------------------------------------------
 Deutsches Forschungszentrum fuer Kuenstliche Intelligenz GmbH
 Firmensitz: Trippstadter Straße 122, D-67663 Kaiserslautern
 Geschaeftsfuehrung: Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster
 (Vorsitzender) Dr. Walter Olthoff
 Vorsitzender des Aufsichtsrats: Prof. Dr. h.c. Hans A. Aukes
 Amtsgericht Kaiserslautern, HRB 2313
 Sitz der Gesellschaft: Kaiserslautern (HRB 2313)
 USt-Id.Nr.:    DE 148646973
 Steuernummer:  19/673/0060/3
 -----------------------------------------------------------------------
#1 lore raw

Hi Markus,

Try adding the following to your recipe file

KERNEL_DEFCONFIG = "odroidxu_ubuntu_defconfig"

do_configure_prepend() {
        install -m 0644 ${S}/arch/${ARCH}/configs/${KERNEL_DEFCONFIG} ${WORKDIR}/defconfig || die "No default configuration for ${MACHINE} / ${KERNEL_DEFCONFIG} available."
}

Regards,
B.Sathish Kumar

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Dr. Markus Eich
Sent: Wednesday, July 09, 2014 3:09 PM
To: [email protected]
Subject: [yocto] How to select defconfig for kernel build with yocto/bitbake

Dear all,

I work on the process to compile odroid xu kernel with yocto/bitbake

In the kernel sources (from hardkernel) I have the corresponding defconfig file, i.e. in the git folder /arch/arm/configs/odroidxu_ubuntu_defconfig.

How can I tell bitbake in my recipe to use "odroidxu_ubuntu_defconfig"?

My recipe looks as follow:

===
require recipes-kernel/linux/linux-yocto.inc

KERNEL_IMAGETYPE = "uImage"

COMPATIBLE_MACHINE = "odroid-xu"

LINUX_VERSION = "3.4.91"
LINUX_VERSION_EXTENSION = "-custom"

FILESEXTRAPATHS_prepend := "${THISDIR}/linux-hardkernel-3.4:"

S = "${WORKDIR}/git"

# from where to fetch the kernel
KERNEL_REPO_OWNER ??= "hardkernel"
KERNEL_REPO_URI ??= "git://github.com/${KERNEL_REPO_OWNER}/linux.git"
KBRANCH = "odroidxu-3.4.y"

SRCREV = "${AUTOREV}"

KV = "3.4.91"
PV = "${KV}+gitr${SRCPV}"
LOCALVERSION ?= ""

SRC_URI = " \
${KERNEL_REPO_URI};nocheckout=1;branch=${KBRANCH} \
"

PACKAGES =+ "kernel-headers" FILES_kernel-headers = "${exec_prefix}/src/linux*"
===

Cheers,

Markus

Signature · 57 lines
Dr.-Ing. Markus Eich

  Senior Researcher
  Marine Inspection Robotics
  Space Robotics
  
  Besuchsadresse der Nebengeschäftstelle:
  DFKI GmbH
  Robotics Innovation Center
  Robert-Hooke-Straße 5
  28359 Bremen, Germany
  
  Postadresse der Hauptgeschäftsstelle Standort Bremen:
  DFKI GmbH
  Robotics Innovation Center
  Robert-Hooke-Straße 1
  28359 Bremen, Germany

  Tel.:     +49 421 178 45-4105
  Zentrale: +49 421 178 45-0
  Fax:      +49 421 178 45-4150 (Faxe bitte namentlich kennzeichnen)
  E-Mail:   [email protected]

  Weitere Informationen: http://www.dfki.de/robotik
  -----------------------------------------------------------------------
  Deutsches Forschungszentrum fuer Kuenstliche Intelligenz GmbH
  Firmensitz: Trippstadter Straße 122, D-67663 Kaiserslautern
  Geschaeftsfuehrung: Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster
  (Vorsitzender) Dr. Walter Olthoff
  Vorsitzender des Aufsichtsrats: Prof. Dr. h.c. Hans A. Aukes
  Amtsgericht Kaiserslautern, HRB 2313
  Sitz der Gesellschaft: Kaiserslautern (HRB 2313)
  USt-Id.Nr.:    DE 148646973
  Steuernummer:  19/673/0060/3
  -----------------------------------------------------------------------

-- 
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto


::DISCLAIMER::
----------------------------------------------------------------------------------------------------------------------------------------------------

The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only.
E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted,
lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents
(with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates.
Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the
views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification,
distribution and / or publication of this message without the prior written consent of authorized representative of
HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately.
Before opening any email and/or attachments, please check them for viruses and other defects.

----------------------------------------------------------------------------------------------------------------------------------------------------
#2 lore raw

Thank you Sathish for the quick answer.

The recipes now copies odroidxu_ubuntu_defconfig to defconfig in the workdir, but it still seems to be ignored. Maybe I am missing some includes to make the .config from defconfig?

Using "make odroidxu_ubuntu_defconfig" using cross compiling (followed by "make zImage") works fine, while bitbake virtual/kernel produces some errors which are probably due to the wrong .config.

Cheers,

Markus

Quoted 73 lines · HCL Tech

Hi Markus,

Try adding the following to your recipe file

KERNEL_DEFCONFIG = "odroidxu_ubuntu_defconfig"

do_configure_prepend() {
         install -m 0644 ${S}/arch/${ARCH}/configs/${KERNEL_DEFCONFIG} ${WORKDIR}/defconfig || die "No default configuration for ${MACHINE} / ${KERNEL_DEFCONFIG} available."
}

Regards,
B.Sathish Kumar

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Dr. Markus Eich
Sent: Wednesday, July 09, 2014 3:09 PM
To: [email protected]
Subject: [yocto] How to select defconfig for kernel build with yocto/bitbake

Dear all,

I work on the process to compile odroid xu kernel with yocto/bitbake

In the kernel sources (from hardkernel) I have the corresponding defconfig file, i.e. in the git folder /arch/arm/configs/odroidxu_ubuntu_defconfig.

How can I tell bitbake in my recipe to use "odroidxu_ubuntu_defconfig"?

My recipe looks as follow:

===
require recipes-kernel/linux/linux-yocto.inc

KERNEL_IMAGETYPE = "uImage"

COMPATIBLE_MACHINE = "odroid-xu"

LINUX_VERSION = "3.4.91"
LINUX_VERSION_EXTENSION = "-custom"

FILESEXTRAPATHS_prepend := "${THISDIR}/linux-hardkernel-3.4:"

S = "${WORKDIR}/git"

# from where to fetch the kernel
KERNEL_REPO_OWNER ??= "hardkernel"
KERNEL_REPO_URI ??= "git://github.com/${KERNEL_REPO_OWNER}/linux.git"
KBRANCH = "odroidxu-3.4.y"

SRCREV = "${AUTOREV}"

KV = "3.4.91"
PV = "${KV}+gitr${SRCPV}"
LOCALVERSION ?= ""

SRC_URI = " \
    ${KERNEL_REPO_URI};nocheckout=1;branch=${KBRANCH} \

"

PACKAGES =+ "kernel-headers" FILES_kernel-headers = "${exec_prefix}/src/linux*"
===

Cheers,

Markus

Signature · 35 lines
Dr.-Ing. Markus Eich

 Senior Researcher
 Marine Inspection Robotics
 Space Robotics
 
 Besuchsadresse der Nebengeschäftstelle:
 DFKI GmbH
 Robotics Innovation Center
 Robert-Hooke-Straße 5
 28359 Bremen, Germany
 
 Postadresse der Hauptgeschäftsstelle Standort Bremen:
 DFKI GmbH
 Robotics Innovation Center
 Robert-Hooke-Straße 1
 28359 Bremen, Germany

 Tel.:     +49 421 178 45-4105
 Zentrale: +49 421 178 45-0
 Fax:      +49 421 178 45-4150 (Faxe bitte namentlich kennzeichnen)
 E-Mail:   [email protected]

 Weitere Informationen: http://www.dfki.de/robotik
 -----------------------------------------------------------------------
 Deutsches Forschungszentrum fuer Kuenstliche Intelligenz GmbH
 Firmensitz: Trippstadter Straße 122, D-67663 Kaiserslautern
 Geschaeftsfuehrung: Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster
 (Vorsitzender) Dr. Walter Olthoff
 Vorsitzender des Aufsichtsrats: Prof. Dr. h.c. Hans A. Aukes
 Amtsgericht Kaiserslautern, HRB 2313
 Sitz der Gesellschaft: Kaiserslautern (HRB 2313)
 USt-Id.Nr.:    DE 148646973
 Steuernummer:  19/673/0060/3
 -----------------------------------------------------------------------
#3 lore raw

Ok. Can you try the following instead of the content I gave before

KERNEL_DEFCONFIG = "odroidxu_ubuntu_defconfig"

kernel_do_configure_append() {
	install -m 0644 ${S}/arch/${ARCH}/configs/${KERNEL_DEFCONFIG} ${WORKDIR}/defconfig
	install -m 0644 ${S}/arch/${ARCH}/configs/${KERNEL_DEFCONFIG} ${S}/.config
}

Regards,
B.Sathish Kumar

-----Original Message-----
From: Dr. Markus Eich [mailto:[email protected]]
Sent: Wednesday, July 09, 2014 5:39 PM
To: Sathish Kumar Balasubramaniam -ERS, HCL Tech; [email protected]
Subject: Re: [yocto] How to select defconfig for kernel build with yocto/bitbake

Thank you Sathish for the quick answer.

The recipes now copies odroidxu_ubuntu_defconfig to defconfig in the workdir, but it still seems to be ignored.
Maybe I am missing some includes to make the .config from defconfig?

Using "make odroidxu_ubuntu_defconfig" using cross compiling (followed by "make zImage") works fine, while bitbake virtual/kernel produces some errors which are probably due to the wrong .config.

Cheers,

Markus

Quoted 73 lines · HCL Tech

Hi Markus,

Try adding the following to your recipe file

KERNEL_DEFCONFIG = "odroidxu_ubuntu_defconfig"

do_configure_prepend() {
         install -m 0644 ${S}/arch/${ARCH}/configs/${KERNEL_DEFCONFIG} ${WORKDIR}/defconfig || die "No default configuration for ${MACHINE} / ${KERNEL_DEFCONFIG} available."
}

Regards,
B.Sathish Kumar

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Dr. Markus Eich
Sent: Wednesday, July 09, 2014 3:09 PM
To: [email protected]
Subject: [yocto] How to select defconfig for kernel build with yocto/bitbake

Dear all,

I work on the process to compile odroid xu kernel with yocto/bitbake

In the kernel sources (from hardkernel) I have the corresponding defconfig file, i.e. in the git folder /arch/arm/configs/odroidxu_ubuntu_defconfig.

How can I tell bitbake in my recipe to use "odroidxu_ubuntu_defconfig"?

My recipe looks as follow:

===
require recipes-kernel/linux/linux-yocto.inc

KERNEL_IMAGETYPE = "uImage"

COMPATIBLE_MACHINE = "odroid-xu"

LINUX_VERSION = "3.4.91"
LINUX_VERSION_EXTENSION = "-custom"

FILESEXTRAPATHS_prepend := "${THISDIR}/linux-hardkernel-3.4:"

S = "${WORKDIR}/git"

# from where to fetch the kernel
KERNEL_REPO_OWNER ??= "hardkernel"
KERNEL_REPO_URI ??= "git://github.com/${KERNEL_REPO_OWNER}/linux.git"
KBRANCH = "odroidxu-3.4.y"

SRCREV = "${AUTOREV}"

KV = "3.4.91"
PV = "${KV}+gitr${SRCPV}"
LOCALVERSION ?= ""

SRC_URI = " \
    ${KERNEL_REPO_URI};nocheckout=1;branch=${KBRANCH} \

"

PACKAGES =+ "kernel-headers" FILES_kernel-headers = "${exec_prefix}/src/linux*"
===

Cheers,

Markus

Signature · 52 lines
Dr.-Ing. Markus Eich

  Senior Researcher
  Marine Inspection Robotics
  Space Robotics
  
  Besuchsadresse der Nebengeschäftstelle:
  DFKI GmbH
  Robotics Innovation Center
  Robert-Hooke-Straße 5
  28359 Bremen, Germany
  
  Postadresse der Hauptgeschäftsstelle Standort Bremen:
  DFKI GmbH
  Robotics Innovation Center
  Robert-Hooke-Straße 1
  28359 Bremen, Germany

  Tel.:     +49 421 178 45-4105
  Zentrale: +49 421 178 45-0
  Fax:      +49 421 178 45-4150 (Faxe bitte namentlich kennzeichnen)
  E-Mail:   [email protected]

  Weitere Informationen: http://www.dfki.de/robotik
  -----------------------------------------------------------------------
  Deutsches Forschungszentrum fuer Kuenstliche Intelligenz GmbH
  Firmensitz: Trippstadter Straße 122, D-67663 Kaiserslautern
  Geschaeftsfuehrung: Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster
  (Vorsitzender) Dr. Walter Olthoff
  Vorsitzender des Aufsichtsrats: Prof. Dr. h.c. Hans A. Aukes
  Amtsgericht Kaiserslautern, HRB 2313
  Sitz der Gesellschaft: Kaiserslautern (HRB 2313)
  USt-Id.Nr.:    DE 148646973
  Steuernummer:  19/673/0060/3
  -----------------------------------------------------------------------



::DISCLAIMER::
----------------------------------------------------------------------------------------------------------------------------------------------------

The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only.
E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted,
lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents
(with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates.
Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the
views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification,
distribution and / or publication of this message without the prior written consent of authorized representative of
HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately.
Before opening any email and/or attachments, please check them for viruses and other defects.

----------------------------------------------------------------------------------------------------------------------------------------------------
#4 lore raw
In reply to Dr. Markus Eich

Sorry, Markus.
Ignore my previous post. It has error.

I think you need to check the output of "bitbake -e <recipe name>" and see how the .config file is created for your recipe. Based on that only we need to update the recipe.

Regards,
B.Sathish Kumar

-----Original Message-----
From: Sathish Kumar Balasubramaniam -ERS, HCL Tech
Sent: Wednesday, July 09, 2014 5:54 PM
To: Dr. Markus Eich; [email protected]
Subject: RE: [yocto] How to select defconfig for kernel build with yocto/bitbake

Ok. Can you try the following instead of the content I gave before

KERNEL_DEFCONFIG = "odroidxu_ubuntu_defconfig"

kernel_do_configure_append() {
	install -m 0644 ${S}/arch/${ARCH}/configs/${KERNEL_DEFCONFIG} ${WORKDIR}/defconfig
	install -m 0644 ${S}/arch/${ARCH}/configs/${KERNEL_DEFCONFIG} ${S}/.config
}

Regards,
B.Sathish Kumar

-----Original Message-----
From: Dr. Markus Eich [mailto:[email protected]]
Sent: Wednesday, July 09, 2014 5:39 PM
To: Sathish Kumar Balasubramaniam -ERS, HCL Tech; [email protected]
Subject: Re: [yocto] How to select defconfig for kernel build with yocto/bitbake

Thank you Sathish for the quick answer.

The recipes now copies odroidxu_ubuntu_defconfig to defconfig in the workdir, but it still seems to be ignored.
Maybe I am missing some includes to make the .config from defconfig?

Using "make odroidxu_ubuntu_defconfig" using cross compiling (followed by "make zImage") works fine, while bitbake virtual/kernel produces some errors which are probably due to the wrong .config.

Cheers,

Markus

Quoted 73 lines · HCL Tech

Hi Markus,

Try adding the following to your recipe file

KERNEL_DEFCONFIG = "odroidxu_ubuntu_defconfig"

do_configure_prepend() {
         install -m 0644 ${S}/arch/${ARCH}/configs/${KERNEL_DEFCONFIG} ${WORKDIR}/defconfig || die "No default configuration for ${MACHINE} / ${KERNEL_DEFCONFIG} available."
}

Regards,
B.Sathish Kumar

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Dr. Markus Eich
Sent: Wednesday, July 09, 2014 3:09 PM
To: [email protected]
Subject: [yocto] How to select defconfig for kernel build with yocto/bitbake

Dear all,

I work on the process to compile odroid xu kernel with yocto/bitbake

In the kernel sources (from hardkernel) I have the corresponding defconfig file, i.e. in the git folder /arch/arm/configs/odroidxu_ubuntu_defconfig.

How can I tell bitbake in my recipe to use "odroidxu_ubuntu_defconfig"?

My recipe looks as follow:

===
require recipes-kernel/linux/linux-yocto.inc

KERNEL_IMAGETYPE = "uImage"

COMPATIBLE_MACHINE = "odroid-xu"

LINUX_VERSION = "3.4.91"
LINUX_VERSION_EXTENSION = "-custom"

FILESEXTRAPATHS_prepend := "${THISDIR}/linux-hardkernel-3.4:"

S = "${WORKDIR}/git"

# from where to fetch the kernel
KERNEL_REPO_OWNER ??= "hardkernel"
KERNEL_REPO_URI ??= "git://github.com/${KERNEL_REPO_OWNER}/linux.git"
KBRANCH = "odroidxu-3.4.y"

SRCREV = "${AUTOREV}"

KV = "3.4.91"
PV = "${KV}+gitr${SRCPV}"
LOCALVERSION ?= ""

SRC_URI = " \
    ${KERNEL_REPO_URI};nocheckout=1;branch=${KBRANCH} \

"

PACKAGES =+ "kernel-headers" FILES_kernel-headers = "${exec_prefix}/src/linux*"
===

Cheers,

Markus

Signature · 52 lines
Dr.-Ing. Markus Eich

  Senior Researcher
  Marine Inspection Robotics
  Space Robotics
  
  Besuchsadresse der Nebengeschäftstelle:
  DFKI GmbH
  Robotics Innovation Center
  Robert-Hooke-Straße 5
  28359 Bremen, Germany
  
  Postadresse der Hauptgeschäftsstelle Standort Bremen:
  DFKI GmbH
  Robotics Innovation Center
  Robert-Hooke-Straße 1
  28359 Bremen, Germany

  Tel.:     +49 421 178 45-4105
  Zentrale: +49 421 178 45-0
  Fax:      +49 421 178 45-4150 (Faxe bitte namentlich kennzeichnen)
  E-Mail:   [email protected]

  Weitere Informationen: http://www.dfki.de/robotik
  -----------------------------------------------------------------------
  Deutsches Forschungszentrum fuer Kuenstliche Intelligenz GmbH
  Firmensitz: Trippstadter Straße 122, D-67663 Kaiserslautern
  Geschaeftsfuehrung: Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster
  (Vorsitzender) Dr. Walter Olthoff
  Vorsitzender des Aufsichtsrats: Prof. Dr. h.c. Hans A. Aukes
  Amtsgericht Kaiserslautern, HRB 2313
  Sitz der Gesellschaft: Kaiserslautern (HRB 2313)
  USt-Id.Nr.:    DE 148646973
  Steuernummer:  19/673/0060/3
  -----------------------------------------------------------------------



::DISCLAIMER::
----------------------------------------------------------------------------------------------------------------------------------------------------

The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only.
E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted,
lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents
(with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates.
Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the
views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification,
distribution and / or publication of this message without the prior written consent of authorized representative of
HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately.
Before opening any email and/or attachments, please check them for viruses and other defects.

----------------------------------------------------------------------------------------------------------------------------------------------------
#5 lore raw

bitbake -e produces the following output. I have listed the methods dealing with .config.

do_kernel_configme() {
    echo "[INFO] doing kernel configme"
    export KMETA=${KMETA}

    if [ -n ${KCONFIG_MODE} ]; then
        configmeflags=${KCONFIG_MODE}
    else
        # If a defconfig was passed, use =n as the baseline, which is 
achieved
        # via --allnoconfig
        if [ -f 
/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/defconfig ]; then
            configmeflags="--allnoconfig"
        fi
    fi

cd
/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/git PATH=/home/eich/yocto/poky/scripts:/home/eich/odroid/build/tmp/sysroots/x86_64-linux/usr/bin/armv7a-vfp-neon-poky-linux-gnueabi:/home/eich/odroid/build/tmp/sysroots/odroid-xu/usr/bin/crossscripts:/home/eich/odroid/build/tmp/sysroots/x86_64-linux/usr/sbin:/home/eich/odroid/build/tmp/sysroots/x86_64-linux/usr/bin:/home/eich/odroid/build/tmp/sysroots/x86_64-linux/sbin:/home/eich/odroid/build/tmp/sysroots/x86_64-linux/bin:/home/eich/yocto/poky/scripts:/home/eich/yocto/poky/bitbake/bin:/home/eich/ros_catkin_ws/install_isolated/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/home/eich/bin:/usr/local/java/jre1.7.0_55/bin:/home/eich/install/bin:/opt/toolchains/arm-eabi-4.6/bin:/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/git/scripts/util

    configme ${configmeflags} --reconfig --output 

/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/linux-odroid_xu-standard-build standard odroid-xu
if [ $? -ne 0 ]; then
echo "ERROR. Could not configure odroid-xu-standard"
exit 1
fi

echo "# Global settings from linux recipe" >>
/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/linux-odroid_xu-standard-build/.config

    echo "CONFIG_LOCALVERSION="\"-custom\" >> 

/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/linux-odroid_xu-standard-build/.config

}

do_compile_kernelmodules() {
unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS MACHINE
if (grep -q -i -e '^CONFIG_MODULES=y$' .config); then
oe_runmake -j 4 modules CC="arm-poky-linux-gnueabi-gcc
-mno-thumb-interwork -marm" LD="arm-poky-linux-gnueabi-ld.bfd "
else
bbnote "no modules to compile"
fi

}

kernel_do_configure() {
    # fixes extra + in /lib/modules/2.6.37+
    # $ scripts/setlocalversion . => +
    # $ make kernelversion => 2.6.37
    # $ make kernelrelease => 2.6.37+
    touch 

/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/linux-odroid_xu-standard-build/.scmversion /home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/git/.scmversion

# Copy defconfig to .config if .config does not exist. This allows
# recipes to manage the .config themselves in do_configure_prepend().
if [ -f
"/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/defconfig" ] && [ ! -f "/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/linux-odroid_xu-standard-build/.config" ]; then
cp
"/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/defconfig" "/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/linux-odroid_xu-standard-build/.config"

    fi
    eval oe_runmake_call oldnoconfig || yes '' | oe_runmake oldconfig
    install -m 0644 
/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/git/arch/arm/configs/odroidxu_ubuntu_defconfig /home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/defconfig
    install -m 0644 

/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/git/arch/arm/configs/odroidxu_ubuntu_defconfig /home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/git/.config

}

kernel_do_install() {
#
# First install the modules
# unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS MACHINE
if (grep -q -i -e '^CONFIG_MODULES=y$' .config); then
oe_runmake DEPMOD=echo
INSTALL_MOD_PATH="/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/image" modules_install
rm
"/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/image/lib/modules/None/build"
rm
"/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/image/lib/modules/None/source"
# If the kernel/ directory is empty remove it to prevent QA issues
rmdir --ignore-fail-on-non-empty
"/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/image/lib/modules/None/kernel"
else
bbnote "no modules to install"
fi

#
# Install various kernel output (zImage, map file, config, module
support files)

    #
    install -d 

/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/image/boot
install -d
/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/image/boot
install -m 0644 arch/arm/boot/uImage
/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/image/boot/uImage-None
install -m 0644 System.map
/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/image/boot/System.map-None

    install -m 0644 .config 
/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/image/boot/config-None
    install -m 0644 vmlinux 
/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/image/boot/vmlinux-None
    [ -e Module.symvers ] && install -m 0644 Module.symvers 

/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/image/boot/Module.symvers-None
install -d
/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/image/etc/modules-load.d
install -d
/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/image/etc/modprobe.d

#
# Support for external module building - create a minimal copy of the
# kernel source tree.
#
kerneldir=/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/image/usr/src/kernel
install -d $kerneldir

#
# Store the kernel version in sysroots for module-base.bbclass #

echo "None" > $kerneldir/kernel-abiversion

#
# Store kernel image name to allow use during image generation #

echo
"uImage--3.4.91+gitrAUTOINC+a26607bfa2-r0-odroid-xu-20140709123549" >$kerneldir/kernel-image-name

#
# Copy the entire source tree. In case an external build directory is
# used, copy the build directory over first, then copy over the source
# dir. This ensures the original Makefiles are used and not the
# redirecting Makefiles in the build directory.
#
find . -depth -not -name "*.cmd" -not -name "*.o" -not -path
"./Documentation*" -not -path "./source*" -not -path "./.*" -print0 | cpio --null -pdlu $kerneldir
cp .config $kerneldir
if [
"/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/git" != "/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/linux-odroid_xu-standard-build" ]; then

        pwd="$PWD"
        cd 
"/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/git"
        find . -depth -not -path "./Documentation*" -not -path "./.*" 

-print0 | cpio --null -pdlu $kerneldir
cd "$pwd"
fi

# Test to ensure that the output file and image type are not actually # the same file. If hardlinking is used, they will be the same, and
there's

    # no need to install.
    ! [ arch/arm/boot/uImage -ef $kerneldir/uImage ] && install -m 0644 
arch/arm/boot/uImage $kerneldir/uImage
    install -m 0644 System.map $kerneldir/System.map-None

# Dummy Makefile so the clean below works
mkdir $kerneldir/Documentation
touch $kerneldir/Documentation/Makefile

#
# Clean and remove files not needed for building modules.
# Some distributions go through a lot more trouble to strip out
# unecessary headers, for now, we just prune the obvious bits.
#
# We don't want to leave host-arch binaries in /sysroots, so
# we clean the scripts dir while leaving the generated config
# and include files.
#
oe_runmake -C $kerneldir CC="arm-poky-linux-gnueabi-gcc
-mno-thumb-interwork -marm" LD="arm-poky-linux-gnueabi-ld.bfd " clean _mrproper_scripts

    # hide directories that shouldn't have their .c, s and S files deleted
    for d in tools scripts lib; do
        mv $kerneldir/$d $kerneldir/.$d
    done
    # delete .c, .s and .S files, unless we hid a directory as .<dir>. 
This technique is
    # much faster than find -prune and -exec
    find $kerneldir -not -path '*/\.*' -type f -name "*.[csS]" -delete
    # put the hidden dirs back
    for d in tools scripts lib; do
        mv $kerneldir/.$d $kerneldir/$d
    done

# As of Linux kernel version 3.0.1, the clean target removes # arch/powerpc/lib/crtsavres.o which is present in
# KBUILD_LDFLAGS_MODULE, making it required to build external modules. if [ arm = "powerpc" ]; then
cp -l arch/powerpc/lib/crtsavres.o
$kerneldir/arch/powerpc/lib/crtsavres.o
fi

# Necessary for building modules like compat-wireless. if [ -f include/generated/bounds.h ]; then
cp -l include/generated/bounds.h
$kerneldir/include/generated/bounds.h
fi
if [ -d arch/arm/include/generated ]; then
mkdir -p $kerneldir/arch/arm/include/generated/ cp -flR arch/arm/include/generated/*
$kerneldir/arch/arm/include/generated/
fi

# Remove the following binaries which cause strip or arch QA errors # during do_package for cross-compiled platforms bin_files="arch/powerpc/boot/addnote arch/powerpc/boot/hack-coff \
arch/powerpc/boot/mktree scripts/kconfig/zconf.tab.o \
scripts/kconfig/conf.o scripts/kconfig/kxgettext.o"
for entry in $bin_files; do
rm -f $kerneldir/$entry
done

# kernels <2.6.30 don't have $kerneldir/tools directory so we check
if it exists before calling sed
if [ -f $kerneldir/tools/perf/Makefile ]; then
# Fix SLANG_INC for slang.h
sed -i 's#-I/usr/include/slang#-I=/usr/include/slang#g'
$kerneldir/tools/perf/Makefile
fi

}

Quoted 127 lines · HCL Tech

Sorry, Markus.
Ignore my previous post. It has error.

I think you need to check the output of "bitbake -e <recipe name>" and see how the .config file is created for your recipe. Based on that only we need to update the recipe.

Regards,
B.Sathish Kumar

-----Original Message-----
From: Sathish Kumar Balasubramaniam -ERS, HCL Tech
Sent: Wednesday, July 09, 2014 5:54 PM
To: Dr. Markus Eich; [email protected]
Subject: RE: [yocto] How to select defconfig for kernel build with yocto/bitbake

Ok. Can you try the following instead of the content I gave before

KERNEL_DEFCONFIG = "odroidxu_ubuntu_defconfig"

kernel_do_configure_append() {
	install -m 0644 ${S}/arch/${ARCH}/configs/${KERNEL_DEFCONFIG} ${WORKDIR}/defconfig
	install -m 0644 ${S}/arch/${ARCH}/configs/${KERNEL_DEFCONFIG} ${S}/.config
}

Regards,
B.Sathish Kumar

-----Original Message-----
From: Dr. Markus Eich [mailto:[email protected]]
Sent: Wednesday, July 09, 2014 5:39 PM
To: Sathish Kumar Balasubramaniam -ERS, HCL Tech; [email protected]
Subject: Re: [yocto] How to select defconfig for kernel build with yocto/bitbake

Thank you Sathish for the quick answer.

The recipes now copies odroidxu_ubuntu_defconfig to defconfig in the workdir, but it still seems to be ignored.
Maybe I am missing some includes to make the .config from defconfig?

Using "make odroidxu_ubuntu_defconfig" using cross compiling (followed by "make zImage") works fine, while bitbake virtual/kernel produces some errors which are probably due to the wrong .config.

Cheers,

Markus

Quoted 73 lines · HCL Tech

Hi Markus,

Try adding the following to your recipe file

KERNEL_DEFCONFIG = "odroidxu_ubuntu_defconfig"

do_configure_prepend() {
          install -m 0644 ${S}/arch/${ARCH}/configs/${KERNEL_DEFCONFIG} ${WORKDIR}/defconfig || die "No default configuration for ${MACHINE} / ${KERNEL_DEFCONFIG} available."
}

Regards,
B.Sathish Kumar

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Dr. Markus Eich
Sent: Wednesday, July 09, 2014 3:09 PM
To: [email protected]
Subject: [yocto] How to select defconfig for kernel build with yocto/bitbake

Dear all,

I work on the process to compile odroid xu kernel with yocto/bitbake

In the kernel sources (from hardkernel) I have the corresponding defconfig file, i.e. in the git folder /arch/arm/configs/odroidxu_ubuntu_defconfig.

How can I tell bitbake in my recipe to use "odroidxu_ubuntu_defconfig"?

My recipe looks as follow:

===
require recipes-kernel/linux/linux-yocto.inc

KERNEL_IMAGETYPE = "uImage"

COMPATIBLE_MACHINE = "odroid-xu"

LINUX_VERSION = "3.4.91"
LINUX_VERSION_EXTENSION = "-custom"

FILESEXTRAPATHS_prepend := "${THISDIR}/linux-hardkernel-3.4:"

S = "${WORKDIR}/git"

# from where to fetch the kernel
KERNEL_REPO_OWNER ??= "hardkernel"
KERNEL_REPO_URI ??= "git://github.com/${KERNEL_REPO_OWNER}/linux.git"
KBRANCH = "odroidxu-3.4.y"

SRCREV = "${AUTOREV}"

KV = "3.4.91"
PV = "${KV}+gitr${SRCPV}"
LOCALVERSION ?= ""

SRC_URI = " \
     ${KERNEL_REPO_URI};nocheckout=1;branch=${KBRANCH} \

"

PACKAGES =+ "kernel-headers" FILES_kernel-headers = "${exec_prefix}/src/linux*"
===

Cheers,

Markus

Signature · 35 lines
Dr.-Ing. Markus Eich

 Senior Researcher
 Marine Inspection Robotics
 Space Robotics
 
 Besuchsadresse der Nebengeschäftstelle:
 DFKI GmbH
 Robotics Innovation Center
 Robert-Hooke-Straße 5
 28359 Bremen, Germany
 
 Postadresse der Hauptgeschäftsstelle Standort Bremen:
 DFKI GmbH
 Robotics Innovation Center
 Robert-Hooke-Straße 1
 28359 Bremen, Germany

 Tel.:     +49 421 178 45-4105
 Zentrale: +49 421 178 45-0
 Fax:      +49 421 178 45-4150 (Faxe bitte namentlich kennzeichnen)
 E-Mail:   [email protected]

 Weitere Informationen: http://www.dfki.de/robotik
 -----------------------------------------------------------------------
 Deutsches Forschungszentrum fuer Kuenstliche Intelligenz GmbH
 Firmensitz: Trippstadter Straße 122, D-67663 Kaiserslautern
 Geschaeftsfuehrung: Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster
 (Vorsitzender) Dr. Walter Olthoff
 Vorsitzender des Aufsichtsrats: Prof. Dr. h.c. Hans A. Aukes
 Amtsgericht Kaiserslautern, HRB 2313
 Sitz der Gesellschaft: Kaiserslautern (HRB 2313)
 USt-Id.Nr.:    DE 148646973
 Steuernummer:  19/673/0060/3
 -----------------------------------------------------------------------
#6 lore raw
In reply to Dr. Markus Eich
Quoted 9 lines · Dr. Markus Eich

Dear all,

I work on the process to compile odroid xu kernel with yocto/bitbake

In the kernel sources (from hardkernel) I have the corresponding defconfig file, i.e. in the git folder /arch/arm/configs/odroidxu_ubuntu_defconfig.

How can I tell bitbake in my recipe to use "odroidxu_ubuntu_defconfig"?

To trigger the oe-core kernel processing to use the defconfig, you need to put that defconfig in your SRC_URI.

Which means you should grab a copy of that from the kernel tree, and in the same directory structure as your kernel recipe.

See meta-skeleton/recipes-kernel/linux/linux-yocto-custom.bb for an example.

Cheers,

Bruce

Quoted 44 lines

My recipe looks as follow:

===
require recipes-kernel/linux/linux-yocto.inc

KERNEL_IMAGETYPE = "uImage"

COMPATIBLE_MACHINE = "odroid-xu"

LINUX_VERSION = "3.4.91"
LINUX_VERSION_EXTENSION = "-custom"

FILESEXTRAPATHS_prepend := "${THISDIR}/linux-hardkernel-3.4:"

S = "${WORKDIR}/git"

# from where to fetch the kernel
KERNEL_REPO_OWNER ??= "hardkernel"
KERNEL_REPO_URI ??= "git://github.com/${KERNEL_REPO_OWNER}/linux.git"
KBRANCH = "odroidxu-3.4.y"

SRCREV = "${AUTOREV}"

KV = "3.4.91"
PV = "${KV}+gitr${SRCPV}"
LOCALVERSION ?= ""

SRC_URI = " \
   ${KERNEL_REPO_URI};nocheckout=1;branch=${KBRANCH} \

"

PACKAGES =+ "kernel-headers" FILES_kernel-headers = "${exec_prefix}/src/linux*"
===

Cheers,

Markus

#7 lore raw

Thank you Bruce, that did the trick. But I am facing a new problem while using bitbake for the build process.

I have checked to build the odroid kernel with a standard crosscompiler tool chain and it works without any problems.

When I do the same with the bitbake toolchain (bitbake virtual/kernel), it somehow creates a recursive link in the folder

package/usr/src/kernel/drivers/gpu/arm/mali400/ump/arch/arch-release -> arch-release

This causes a crash in the build system.

Compilation runs fine though. This error seems to be within do_package. I have removed the link, but somehow it is created automatically.

Any ideas?

/Markus

Quoted 70 lines · Bruce Ashfield
Quoted 9 lines · Dr. Markus Eich

Dear all,

I work on the process to compile odroid xu kernel with yocto/bitbake

In the kernel sources (from hardkernel) I have the corresponding defconfig file, i.e. in the git folder /arch/arm/configs/odroidxu_ubuntu_defconfig.

How can I tell bitbake in my recipe to use "odroidxu_ubuntu_defconfig"?

To trigger the oe-core kernel processing to use the defconfig, you need to put that defconfig in your SRC_URI.

Which means you should grab a copy of that from the kernel tree, and in the same directory structure as your kernel recipe.

See meta-skeleton/recipes-kernel/linux/linux-yocto-custom.bb for an example.

Cheers,

Bruce

Quoted 44 lines

My recipe looks as follow:

===
require recipes-kernel/linux/linux-yocto.inc

KERNEL_IMAGETYPE = "uImage"

COMPATIBLE_MACHINE = "odroid-xu"

LINUX_VERSION = "3.4.91"
LINUX_VERSION_EXTENSION = "-custom"

FILESEXTRAPATHS_prepend := "${THISDIR}/linux-hardkernel-3.4:"

S = "${WORKDIR}/git"

# from where to fetch the kernel
KERNEL_REPO_OWNER ??= "hardkernel"
KERNEL_REPO_URI ??= "git://github.com/${KERNEL_REPO_OWNER}/linux.git"
KBRANCH = "odroidxu-3.4.y"

SRCREV = "${AUTOREV}"

KV = "3.4.91"
PV = "${KV}+gitr${SRCPV}"
LOCALVERSION ?= ""

SRC_URI = " \
   ${KERNEL_REPO_URI};nocheckout=1;branch=${KBRANCH} \

"

PACKAGES =+ "kernel-headers" FILES_kernel-headers = "${exec_prefix}/src/linux*"
===

Cheers,

Markus

Signature · 33 lines
Dr.-Ing. Markus Eich

 Senior Researcher
 Marine Inspection Robotics
 Space Robotics
  Besuchsadresse der Nebengeschäftstelle:
 DFKI GmbH
 Robotics Innovation Center
 Robert-Hooke-Straße 5
 28359 Bremen, Germany
  Postadresse der Hauptgeschäftsstelle Standort Bremen:
 DFKI GmbH
 Robotics Innovation Center
 Robert-Hooke-Straße 1
 28359 Bremen, Germany

 Tel.:     +49 421 178 45-4105
 Zentrale: +49 421 178 45-0
 Fax:      +49 421 178 45-4150 (Faxe bitte namentlich kennzeichnen)
 E-Mail:   [email protected]

 Weitere Informationen: http://www.dfki.de/robotik
 -----------------------------------------------------------------------
 Deutsches Forschungszentrum fuer Kuenstliche Intelligenz GmbH
 Firmensitz: Trippstadter Straße 122, D-67663 Kaiserslautern
 Geschaeftsfuehrung: Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster
 (Vorsitzender) Dr. Walter Olthoff
 Vorsitzender des Aufsichtsrats: Prof. Dr. h.c. Hans A. Aukes
 Amtsgericht Kaiserslautern, HRB 2313
 Sitz der Gesellschaft: Kaiserslautern (HRB 2313)
 USt-Id.Nr.:    DE 148646973
 Steuernummer:  19/673/0060/3
 -----------------------------------------------------------------------
#8 lore raw
Quoted 12 lines · Dr. Markus Eich

Thank you Bruce, that did the trick. But I am facing a new problem while using bitbake for the build process.

I have checked to build the odroid kernel with a standard crosscompiler tool chain and it works without any problems.

When I do the same with the bitbake toolchain (bitbake virtual/kernel), it somehow creates a recursive link in the folder

package/usr/src/kernel/drivers/gpu/arm/mali400/ump/arch/arch-release -> arch-release

Quoted 6 lines

This causes a crash in the build system.

Compilation runs fine though. This error seems to be within do_package. I have removed the link, but somehow it is created automatically.

Any ideas?

Nothing off the top of my head. That link would be created by the kernel build, and not by bitbake or the oe-core kernel build classes.

I'd start by looking at the kernel's makefiles and seeing where the link is being created.

Do specific tasks work ? i.e. is that happening during unpack/patch, or during compilation.

Bruce

Quoted 77 lines

/Markus

Quoted 70 lines · Bruce Ashfield
Quoted 9 lines · Dr. Markus Eich

Dear all,

I work on the process to compile odroid xu kernel with yocto/bitbake

In the kernel sources (from hardkernel) I have the corresponding defconfig file, i.e. in the git folder /arch/arm/configs/odroidxu_ubuntu_defconfig.

How can I tell bitbake in my recipe to use "odroidxu_ubuntu_defconfig"?

To trigger the oe-core kernel processing to use the defconfig, you need to put that defconfig in your SRC_URI.

Which means you should grab a copy of that from the kernel tree, and in the same directory structure as your kernel recipe.

See meta-skeleton/recipes-kernel/linux/linux-yocto-custom.bb for an example.

Cheers,

Bruce

Quoted 44 lines

My recipe looks as follow:

===
require recipes-kernel/linux/linux-yocto.inc

KERNEL_IMAGETYPE = "uImage"

COMPATIBLE_MACHINE = "odroid-xu"

LINUX_VERSION = "3.4.91"
LINUX_VERSION_EXTENSION = "-custom"

FILESEXTRAPATHS_prepend := "${THISDIR}/linux-hardkernel-3.4:"

S = "${WORKDIR}/git"

# from where to fetch the kernel
KERNEL_REPO_OWNER ??= "hardkernel"
KERNEL_REPO_URI ??= "git://github.com/${KERNEL_REPO_OWNER}/linux.git"
KBRANCH = "odroidxu-3.4.y"

SRCREV = "${AUTOREV}"

KV = "3.4.91"
PV = "${KV}+gitr${SRCPV}"
LOCALVERSION ?= ""

SRC_URI = " \
   ${KERNEL_REPO_URI};nocheckout=1;branch=${KBRANCH} \

"

PACKAGES =+ "kernel-headers" FILES_kernel-headers = "${exec_prefix}/src/linux*"
===

Cheers,

Markus

#9 lore raw

I have tried the different task separately.

do_fetch works, no recursive link created do_kernel_checkout works, no recursive link created do_kernel_configme works, no recursive link created do_compile works, no recursive link created do_compile_kernelmodules works, no recursive link created do_install works, no recursive link created

do_package : Here it crashes. Th package subfolder is created and here it creates the recursive link within the subfolder.

What does do_package do in detail? How can I further analyze the error.

/Markus

Quoted 109 lines · Bruce Ashfield
Quoted 12 lines · Dr. Markus Eich

Thank you Bruce, that did the trick. But I am facing a new problem while using bitbake for the build process.

I have checked to build the odroid kernel with a standard crosscompiler tool chain and it works without any problems.

When I do the same with the bitbake toolchain (bitbake virtual/kernel), it somehow creates a recursive link in the folder

package/usr/src/kernel/drivers/gpu/arm/mali400/ump/arch/arch-release -> arch-release

Quoted 6 lines

This causes a crash in the build system.

Compilation runs fine though. This error seems to be within do_package. I have removed the link, but somehow it is created automatically.

Any ideas?

Nothing off the top of my head. That link would be created by the kernel build, and not by bitbake or the oe-core kernel build classes.

I'd start by looking at the kernel's makefiles and seeing where the link is being created.

Do specific tasks work ? i.e. is that happening during unpack/patch, or during compilation.

Bruce

Quoted 77 lines

/Markus

Quoted 70 lines · Bruce Ashfield
Quoted 9 lines · Dr. Markus Eich

Dear all,

I work on the process to compile odroid xu kernel with yocto/bitbake

In the kernel sources (from hardkernel) I have the corresponding defconfig file, i.e. in the git folder /arch/arm/configs/odroidxu_ubuntu_defconfig.

How can I tell bitbake in my recipe to use "odroidxu_ubuntu_defconfig"?

To trigger the oe-core kernel processing to use the defconfig, you need to put that defconfig in your SRC_URI.

Which means you should grab a copy of that from the kernel tree, and in the same directory structure as your kernel recipe.

See meta-skeleton/recipes-kernel/linux/linux-yocto-custom.bb for an example.

Cheers,

Bruce

Quoted 44 lines

My recipe looks as follow:

===
require recipes-kernel/linux/linux-yocto.inc

KERNEL_IMAGETYPE = "uImage"

COMPATIBLE_MACHINE = "odroid-xu"

LINUX_VERSION = "3.4.91"
LINUX_VERSION_EXTENSION = "-custom"

FILESEXTRAPATHS_prepend := "${THISDIR}/linux-hardkernel-3.4:"

S = "${WORKDIR}/git"

# from where to fetch the kernel
KERNEL_REPO_OWNER ??= "hardkernel"
KERNEL_REPO_URI ??= "git://github.com/${KERNEL_REPO_OWNER}/linux.git"
KBRANCH = "odroidxu-3.4.y"

SRCREV = "${AUTOREV}"

KV = "3.4.91"
PV = "${KV}+gitr${SRCPV}"
LOCALVERSION ?= ""

SRC_URI = " \
   ${KERNEL_REPO_URI};nocheckout=1;branch=${KBRANCH} \

"

PACKAGES =+ "kernel-headers" FILES_kernel-headers = "${exec_prefix}/src/linux*"
===

Cheers,

Markus

Signature · 35 lines
Dr.-Ing. Markus Eich

 Senior Researcher
 Marine Inspection Robotics
 Space Robotics
 
 Besuchsadresse der Nebengeschäftstelle:
 DFKI GmbH
 Robotics Innovation Center
 Robert-Hooke-Straße 5
 28359 Bremen, Germany
 
 Postadresse der Hauptgeschäftsstelle Standort Bremen:
 DFKI GmbH
 Robotics Innovation Center
 Robert-Hooke-Straße 1
 28359 Bremen, Germany

 Tel.:     +49 421 178 45-4105
 Zentrale: +49 421 178 45-0
 Fax:      +49 421 178 45-4150 (Faxe bitte namentlich kennzeichnen)
 E-Mail:   [email protected]

 Weitere Informationen: http://www.dfki.de/robotik
 -----------------------------------------------------------------------
 Deutsches Forschungszentrum fuer Kuenstliche Intelligenz GmbH
 Firmensitz: Trippstadter Straße 122, D-67663 Kaiserslautern
 Geschaeftsfuehrung: Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster
 (Vorsitzender) Dr. Walter Olthoff
 Vorsitzender des Aufsichtsrats: Prof. Dr. h.c. Hans A. Aukes
 Amtsgericht Kaiserslautern, HRB 2313
 Sitz der Gesellschaft: Kaiserslautern (HRB 2313)
 USt-Id.Nr.:    DE 148646973
 Steuernummer:  19/673/0060/3
 -----------------------------------------------------------------------
#10 lore raw
Quoted 8 lines · Dr. Markus Eich

I have tried the different task separately.

do_fetch works, no recursive link created do_kernel_checkout works, no recursive link created do_kernel_configme works, no recursive link created do_compile works, no recursive link created do_compile_kernelmodules works, no recursive link created do_install works, no recursive link created

There's no recursive link, but is the arch-release link created, but pointing somewhere else ?

Quoted 5 lines

do_package : Here it crashes. Th package subfolder is created and here it creates the recursive link within the subfolder.

What does do_package do in detail? How can I further analyze the error.

Interesting. There's nothing custom in the kernel for packaging, and nothing that I can think would be creating that symlink.

No good ideas at the moment, outside of pinpointing exactly where the link is created, and when it transitions to a recursive one .. and I'd do that by instrumentation.

Bruce

Quoted 118 lines

/Markus

Quoted 110 lines · Bruce Ashfield
Quoted 12 lines · Dr. Markus Eich

Thank you Bruce, that did the trick. But I am facing a new problem while using bitbake for the build process.

I have checked to build the odroid kernel with a standard crosscompiler tool chain and it works without any problems.

When I do the same with the bitbake toolchain (bitbake virtual/kernel), it somehow creates a recursive link in the folder

package/usr/src/kernel/drivers/gpu/arm/mali400/ump/arch/arch-release -> arch-release

Quoted 6 lines

This causes a crash in the build system.

Compilation runs fine though. This error seems to be within do_package. I have removed the link, but somehow it is created automatically.

Any ideas?

Nothing off the top of my head. That link would be created by the kernel build, and not by bitbake or the oe-core kernel build classes.

I'd start by looking at the kernel's makefiles and seeing where the link is being created.

Do specific tasks work ? i.e. is that happening during unpack/patch, or during compilation.

Bruce

Quoted 78 lines

/Markus

Quoted 71 lines · Bruce Ashfield
Quoted 10 lines · Dr. Markus Eich

Dear all,

I work on the process to compile odroid xu kernel with yocto/bitbake

In the kernel sources (from hardkernel) I have the corresponding defconfig file, i.e. in the git folder /arch/arm/configs/odroidxu_ubuntu_defconfig.

How can I tell bitbake in my recipe to use
"odroidxu_ubuntu_defconfig"?

To trigger the oe-core kernel processing to use the defconfig, you need to put that defconfig in your SRC_URI.

Which means you should grab a copy of that from the kernel tree, and in the same directory structure as your kernel recipe.

See meta-skeleton/recipes-kernel/linux/linux-yocto-custom.bb for an example.

Cheers,

Bruce

Quoted 44 lines

My recipe looks as follow:

===
require recipes-kernel/linux/linux-yocto.inc

KERNEL_IMAGETYPE = "uImage"

COMPATIBLE_MACHINE = "odroid-xu"

LINUX_VERSION = "3.4.91"
LINUX_VERSION_EXTENSION = "-custom"

FILESEXTRAPATHS_prepend := "${THISDIR}/linux-hardkernel-3.4:"

S = "${WORKDIR}/git"

# from where to fetch the kernel
KERNEL_REPO_OWNER ??= "hardkernel"
KERNEL_REPO_URI ??= "git://github.com/${KERNEL_REPO_OWNER}/linux.git"
KBRANCH = "odroidxu-3.4.y"

SRCREV = "${AUTOREV}"

KV = "3.4.91"
PV = "${KV}+gitr${SRCPV}"
LOCALVERSION ?= ""

SRC_URI = " \
   ${KERNEL_REPO_URI};nocheckout=1;branch=${KBRANCH} \

"

PACKAGES =+ "kernel-headers" FILES_kernel-headers = "${exec_prefix}/src/linux*"
===

Cheers,

Markus