How to select defconfig for kernel build with yocto/bitbake
Dear all,
I work on the process to compile odroid xu kernel with yocto/bitbake
In the kernel sources (from hardkernel) I have the corresponding defconfig file, i.e. in the git folder /arch/arm/configs/odroidxu_ubuntu_defconfig.
How can I tell bitbake in my recipe to use "odroidxu_ubuntu_defconfig"?
My recipe looks as follow:
===
require recipes-kernel/linux/linux-yocto.inc
KERNEL_IMAGETYPE = "uImage"
COMPATIBLE_MACHINE = "odroid-xu"
LINUX_VERSION = "3.4.91"LINUX_VERSION_EXTENSION = "-custom"
FILESEXTRAPATHS_prepend := "${THISDIR}/linux-hardkernel-3.4:"
S = "${WORKDIR}/git"
# from where to fetch the kernel
KERNEL_REPO_OWNER ??= "hardkernel"
KERNEL_REPO_URI ??= "git://github.com/${KERNEL_REPO_OWNER}/linux.git"
KBRANCH = "odroidxu-3.4.y"SRCREV = "${AUTOREV}"
KV = "3.4.91"
PV = "${KV}+gitr${SRCPV}"
LOCALVERSION ?= ""
SRC_URI = " \
${KERNEL_REPO_URI};nocheckout=1;branch=${KBRANCH} \
"
PACKAGES =+ "kernel-headers" FILES_kernel-headers = "${exec_prefix}/src/linux*"
===
Cheers,
Markus
Signature · 35 lines
Dr.-Ing. Markus Eich Senior Researcher Marine Inspection Robotics Space Robotics Besuchsadresse der Nebengeschäftstelle: DFKI GmbH Robotics Innovation Center Robert-Hooke-Straße 5 28359 Bremen, Germany Postadresse der Hauptgeschäftsstelle Standort Bremen: DFKI GmbH Robotics Innovation Center Robert-Hooke-Straße 1 28359 Bremen, Germany Tel.: +49 421 178 45-4105 Zentrale: +49 421 178 45-0 Fax: +49 421 178 45-4150 (Faxe bitte namentlich kennzeichnen) E-Mail: [email protected] Weitere Informationen: http://www.dfki.de/robotik ----------------------------------------------------------------------- Deutsches Forschungszentrum fuer Kuenstliche Intelligenz GmbH Firmensitz: Trippstadter Straße 122, D-67663 Kaiserslautern Geschaeftsfuehrung: Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster (Vorsitzender) Dr. Walter Olthoff Vorsitzender des Aufsichtsrats: Prof. Dr. h.c. Hans A. Aukes Amtsgericht Kaiserslautern, HRB 2313 Sitz der Gesellschaft: Kaiserslautern (HRB 2313) USt-Id.Nr.: DE 148646973 Steuernummer: 19/673/0060/3 -----------------------------------------------------------------------
Hi Markus,
Try adding the following to your recipe file
KERNEL_DEFCONFIG = "odroidxu_ubuntu_defconfig"
do_configure_prepend() {
install -m 0644 ${S}/arch/${ARCH}/configs/${KERNEL_DEFCONFIG} ${WORKDIR}/defconfig || die "No default configuration for ${MACHINE} / ${KERNEL_DEFCONFIG} available."
}Regards,
B.Sathish Kumar
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Dr. Markus Eich
Sent: Wednesday, July 09, 2014 3:09 PM
To: [email protected]
Subject: [yocto] How to select defconfig for kernel build with yocto/bitbake
Dear all,
I work on the process to compile odroid xu kernel with yocto/bitbake
In the kernel sources (from hardkernel) I have the corresponding defconfig file, i.e. in the git folder /arch/arm/configs/odroidxu_ubuntu_defconfig.
How can I tell bitbake in my recipe to use "odroidxu_ubuntu_defconfig"?
My recipe looks as follow:
===
require recipes-kernel/linux/linux-yocto.inc
KERNEL_IMAGETYPE = "uImage"
COMPATIBLE_MACHINE = "odroid-xu"
LINUX_VERSION = "3.4.91"LINUX_VERSION_EXTENSION = "-custom"
FILESEXTRAPATHS_prepend := "${THISDIR}/linux-hardkernel-3.4:"
S = "${WORKDIR}/git"
# from where to fetch the kernel
KERNEL_REPO_OWNER ??= "hardkernel"
KERNEL_REPO_URI ??= "git://github.com/${KERNEL_REPO_OWNER}/linux.git"
KBRANCH = "odroidxu-3.4.y"SRCREV = "${AUTOREV}"
KV = "3.4.91"
PV = "${KV}+gitr${SRCPV}"
LOCALVERSION ?= ""
SRC_URI = " \
${KERNEL_REPO_URI};nocheckout=1;branch=${KBRANCH} \
"
PACKAGES =+ "kernel-headers" FILES_kernel-headers = "${exec_prefix}/src/linux*"
===
Cheers,
Markus
Signature · 57 lines
Dr.-Ing. Markus Eich Senior Researcher Marine Inspection Robotics Space Robotics Besuchsadresse der Nebengeschäftstelle: DFKI GmbH Robotics Innovation Center Robert-Hooke-Straße 5 28359 Bremen, Germany Postadresse der Hauptgeschäftsstelle Standort Bremen: DFKI GmbH Robotics Innovation Center Robert-Hooke-Straße 1 28359 Bremen, Germany Tel.: +49 421 178 45-4105 Zentrale: +49 421 178 45-0 Fax: +49 421 178 45-4150 (Faxe bitte namentlich kennzeichnen) E-Mail: [email protected] Weitere Informationen: http://www.dfki.de/robotik ----------------------------------------------------------------------- Deutsches Forschungszentrum fuer Kuenstliche Intelligenz GmbH Firmensitz: Trippstadter Straße 122, D-67663 Kaiserslautern Geschaeftsfuehrung: Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster (Vorsitzender) Dr. Walter Olthoff Vorsitzender des Aufsichtsrats: Prof. Dr. h.c. Hans A. Aukes Amtsgericht Kaiserslautern, HRB 2313 Sitz der Gesellschaft: Kaiserslautern (HRB 2313) USt-Id.Nr.: DE 148646973 Steuernummer: 19/673/0060/3 ----------------------------------------------------------------------- -- _______________________________________________ yocto mailing list [email protected] https://lists.yoctoproject.org/listinfo/yocto ::DISCLAIMER:: ---------------------------------------------------------------------------------------------------------------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects. ----------------------------------------------------------------------------------------------------------------------------------------------------
Thank you Sathish for the quick answer.
The recipes now copies odroidxu_ubuntu_defconfig to defconfig in the workdir, but it still seems to be ignored. Maybe I am missing some includes to make the .config from defconfig?
Using "make odroidxu_ubuntu_defconfig" using cross compiling (followed by "make zImage") works fine, while bitbake virtual/kernel produces some errors which are probably due to the wrong .config.
Cheers,
Markus
Quoted 73 lines · HCL Tech
Hi Markus,
Try adding the following to your recipe file
KERNEL_DEFCONFIG= "odroidxu_ubuntu_defconfig"do_configure_prepend() { install -m 0644 ${S}/arch/${ARCH}/configs/${KERNEL_DEFCONFIG} ${WORKDIR}/defconfig || die "No default configuration for ${MACHINE} / ${KERNEL_DEFCONFIG} available." }Regards,
B.Sathish Kumar-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Dr. Markus Eich
Sent: Wednesday, July 09, 2014 3:09 PM
To: [email protected]
Subject: [yocto] How to select defconfig for kernel build with yocto/bitbakeDear all,
I work on the process to compile odroid xu kernel with yocto/bitbake
In the kernel sources (from hardkernel) I have the corresponding defconfig file, i.e. in the git folder /arch/arm/configs/odroidxu_ubuntu_defconfig.
How can I tell bitbake in my recipe to use "
odroidxu_ubuntu_defconfig"?My recipe looks as follow:
===
require recipes-kernel/linux/linux-yocto.inc
KERNEL_IMAGETYPE= "uImage"
COMPATIBLE_MACHINE= "odroid-xu"
LINUX_VERSION= "3.4.91"LINUX_VERSION_EXTENSION= "-custom"
FILESEXTRAPATHS_prepend:= "${THISDIR}/linux-hardkernel-3.4:"S = "${WORKDIR}/git"
# from where to fetch the kernel KERNEL_REPO_OWNER ??= "hardkernel" KERNEL_REPO_URI ??= "git://github.com/${KERNEL_REPO_OWNER}/linux.git" KBRANCH = "odroidxu-3.4.y"SRCREV = "${AUTOREV}"
KV = "3.4.91"
PV = "${KV}+gitr${SRCPV}"
LOCALVERSION ?= ""SRC_URI = " \ ${KERNEL_REPO_URI};nocheckout=1;branch=${KBRANCH} \"
PACKAGES =+ "kernel-headers" FILES_kernel-headers = "${exec_prefix}/src/linux*"
===Cheers,
Markus
Signature · 35 lines
Dr.-Ing. Markus Eich Senior Researcher Marine Inspection Robotics Space Robotics Besuchsadresse der Nebengeschäftstelle: DFKI GmbH Robotics Innovation Center Robert-Hooke-Straße 5 28359 Bremen, Germany Postadresse der Hauptgeschäftsstelle Standort Bremen: DFKI GmbH Robotics Innovation Center Robert-Hooke-Straße 1 28359 Bremen, Germany Tel.: +49 421 178 45-4105 Zentrale: +49 421 178 45-0 Fax: +49 421 178 45-4150 (Faxe bitte namentlich kennzeichnen) E-Mail: [email protected] Weitere Informationen: http://www.dfki.de/robotik ----------------------------------------------------------------------- Deutsches Forschungszentrum fuer Kuenstliche Intelligenz GmbH Firmensitz: Trippstadter Straße 122, D-67663 Kaiserslautern Geschaeftsfuehrung: Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster (Vorsitzender) Dr. Walter Olthoff Vorsitzender des Aufsichtsrats: Prof. Dr. h.c. Hans A. Aukes Amtsgericht Kaiserslautern, HRB 2313 Sitz der Gesellschaft: Kaiserslautern (HRB 2313) USt-Id.Nr.: DE 148646973 Steuernummer: 19/673/0060/3 -----------------------------------------------------------------------
Ok. Can you try the following instead of the content I gave before
KERNEL_DEFCONFIG = "odroidxu_ubuntu_defconfig"
kernel_do_configure_append() {
install -m 0644 ${S}/arch/${ARCH}/configs/${KERNEL_DEFCONFIG} ${WORKDIR}/defconfig
install -m 0644 ${S}/arch/${ARCH}/configs/${KERNEL_DEFCONFIG} ${S}/.config
}Regards,
B.Sathish Kumar
-----Original Message-----
From: Dr. Markus Eich [mailto:[email protected]]
Sent: Wednesday, July 09, 2014 5:39 PM
To: Sathish Kumar Balasubramaniam -ERS, HCL Tech; [email protected]
Subject: Re: [yocto] How to select defconfig for kernel build with yocto/bitbake
Thank you Sathish for the quick answer.
The recipes now copies odroidxu_ubuntu_defconfig to defconfig in the workdir, but it still seems to be ignored.
Maybe I am missing some includes to make the .config from defconfig?
Using "make odroidxu_ubuntu_defconfig" using cross compiling (followed by "make zImage") works fine, while bitbake virtual/kernel produces some errors which are probably due to the wrong .config.
Cheers,
Markus
Quoted 73 lines · HCL Tech
Hi Markus,
Try adding the following to your recipe file
KERNEL_DEFCONFIG= "odroidxu_ubuntu_defconfig"do_configure_prepend() { install -m 0644 ${S}/arch/${ARCH}/configs/${KERNEL_DEFCONFIG} ${WORKDIR}/defconfig || die "No default configuration for ${MACHINE} / ${KERNEL_DEFCONFIG} available." }Regards,
B.Sathish Kumar-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Dr. Markus Eich
Sent: Wednesday, July 09, 2014 3:09 PM
To: [email protected]
Subject: [yocto] How to select defconfig for kernel build with yocto/bitbakeDear all,
I work on the process to compile odroid xu kernel with yocto/bitbake
In the kernel sources (from hardkernel) I have the corresponding defconfig file, i.e. in the git folder /arch/arm/configs/odroidxu_ubuntu_defconfig.
How can I tell bitbake in my recipe to use "
odroidxu_ubuntu_defconfig"?My recipe looks as follow:
===
require recipes-kernel/linux/linux-yocto.inc
KERNEL_IMAGETYPE= "uImage"
COMPATIBLE_MACHINE= "odroid-xu"
LINUX_VERSION= "3.4.91"LINUX_VERSION_EXTENSION= "-custom"
FILESEXTRAPATHS_prepend:= "${THISDIR}/linux-hardkernel-3.4:"S = "${WORKDIR}/git"
# from where to fetch the kernel KERNEL_REPO_OWNER ??= "hardkernel" KERNEL_REPO_URI ??= "git://github.com/${KERNEL_REPO_OWNER}/linux.git" KBRANCH = "odroidxu-3.4.y"SRCREV = "${AUTOREV}"
KV = "3.4.91"
PV = "${KV}+gitr${SRCPV}"
LOCALVERSION ?= ""SRC_URI = " \ ${KERNEL_REPO_URI};nocheckout=1;branch=${KBRANCH} \"
PACKAGES =+ "kernel-headers" FILES_kernel-headers = "${exec_prefix}/src/linux*"
===Cheers,
Markus
Signature · 52 lines
Dr.-Ing. Markus Eich Senior Researcher Marine Inspection Robotics Space Robotics Besuchsadresse der Nebengeschäftstelle: DFKI GmbH Robotics Innovation Center Robert-Hooke-Straße 5 28359 Bremen, Germany Postadresse der Hauptgeschäftsstelle Standort Bremen: DFKI GmbH Robotics Innovation Center Robert-Hooke-Straße 1 28359 Bremen, Germany Tel.: +49 421 178 45-4105 Zentrale: +49 421 178 45-0 Fax: +49 421 178 45-4150 (Faxe bitte namentlich kennzeichnen) E-Mail: [email protected] Weitere Informationen: http://www.dfki.de/robotik ----------------------------------------------------------------------- Deutsches Forschungszentrum fuer Kuenstliche Intelligenz GmbH Firmensitz: Trippstadter Straße 122, D-67663 Kaiserslautern Geschaeftsfuehrung: Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster (Vorsitzender) Dr. Walter Olthoff Vorsitzender des Aufsichtsrats: Prof. Dr. h.c. Hans A. Aukes Amtsgericht Kaiserslautern, HRB 2313 Sitz der Gesellschaft: Kaiserslautern (HRB 2313) USt-Id.Nr.: DE 148646973 Steuernummer: 19/673/0060/3 ----------------------------------------------------------------------- ::DISCLAIMER:: ---------------------------------------------------------------------------------------------------------------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects. ----------------------------------------------------------------------------------------------------------------------------------------------------
Sorry, Markus.
Ignore my previous post. It has error.
I think you need to check the output of "bitbake -e <recipe name>" and see how the .config file is created for your recipe. Based on that only we need to update the recipe.
Regards,
B.Sathish Kumar
-----Original Message-----
From: Sathish Kumar Balasubramaniam -ERS, HCL Tech
Sent: Wednesday, July 09, 2014 5:54 PM
To: Dr. Markus Eich; [email protected]
Subject: RE: [yocto] How to select defconfig for kernel build with yocto/bitbake
Ok. Can you try the following instead of the content I gave before
KERNEL_DEFCONFIG = "odroidxu_ubuntu_defconfig"
kernel_do_configure_append() {
install -m 0644 ${S}/arch/${ARCH}/configs/${KERNEL_DEFCONFIG} ${WORKDIR}/defconfig
install -m 0644 ${S}/arch/${ARCH}/configs/${KERNEL_DEFCONFIG} ${S}/.config
}Regards,
B.Sathish Kumar
-----Original Message-----
From: Dr. Markus Eich [mailto:[email protected]]
Sent: Wednesday, July 09, 2014 5:39 PM
To: Sathish Kumar Balasubramaniam -ERS, HCL Tech; [email protected]
Subject: Re: [yocto] How to select defconfig for kernel build with yocto/bitbake
Thank you Sathish for the quick answer.
The recipes now copies odroidxu_ubuntu_defconfig to defconfig in the workdir, but it still seems to be ignored.
Maybe I am missing some includes to make the .config from defconfig?
Using "make odroidxu_ubuntu_defconfig" using cross compiling (followed by "make zImage") works fine, while bitbake virtual/kernel produces some errors which are probably due to the wrong .config.
Cheers,
Markus
Quoted 73 lines · HCL Tech
Hi Markus,
Try adding the following to your recipe file
KERNEL_DEFCONFIG= "odroidxu_ubuntu_defconfig"do_configure_prepend() { install -m 0644 ${S}/arch/${ARCH}/configs/${KERNEL_DEFCONFIG} ${WORKDIR}/defconfig || die "No default configuration for ${MACHINE} / ${KERNEL_DEFCONFIG} available." }Regards,
B.Sathish Kumar-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Dr. Markus Eich
Sent: Wednesday, July 09, 2014 3:09 PM
To: [email protected]
Subject: [yocto] How to select defconfig for kernel build with yocto/bitbakeDear all,
I work on the process to compile odroid xu kernel with yocto/bitbake
In the kernel sources (from hardkernel) I have the corresponding defconfig file, i.e. in the git folder /arch/arm/configs/odroidxu_ubuntu_defconfig.
How can I tell bitbake in my recipe to use "
odroidxu_ubuntu_defconfig"?My recipe looks as follow:
===
require recipes-kernel/linux/linux-yocto.inc
KERNEL_IMAGETYPE= "uImage"
COMPATIBLE_MACHINE= "odroid-xu"
LINUX_VERSION= "3.4.91"LINUX_VERSION_EXTENSION= "-custom"
FILESEXTRAPATHS_prepend:= "${THISDIR}/linux-hardkernel-3.4:"S = "${WORKDIR}/git"
# from where to fetch the kernel KERNEL_REPO_OWNER ??= "hardkernel" KERNEL_REPO_URI ??= "git://github.com/${KERNEL_REPO_OWNER}/linux.git" KBRANCH = "odroidxu-3.4.y"SRCREV = "${AUTOREV}"
KV = "3.4.91"
PV = "${KV}+gitr${SRCPV}"
LOCALVERSION ?= ""SRC_URI = " \ ${KERNEL_REPO_URI};nocheckout=1;branch=${KBRANCH} \"
PACKAGES =+ "kernel-headers" FILES_kernel-headers = "${exec_prefix}/src/linux*"
===Cheers,
Markus
Signature · 52 lines
Dr.-Ing. Markus Eich Senior Researcher Marine Inspection Robotics Space Robotics Besuchsadresse der Nebengeschäftstelle: DFKI GmbH Robotics Innovation Center Robert-Hooke-Straße 5 28359 Bremen, Germany Postadresse der Hauptgeschäftsstelle Standort Bremen: DFKI GmbH Robotics Innovation Center Robert-Hooke-Straße 1 28359 Bremen, Germany Tel.: +49 421 178 45-4105 Zentrale: +49 421 178 45-0 Fax: +49 421 178 45-4150 (Faxe bitte namentlich kennzeichnen) E-Mail: [email protected] Weitere Informationen: http://www.dfki.de/robotik ----------------------------------------------------------------------- Deutsches Forschungszentrum fuer Kuenstliche Intelligenz GmbH Firmensitz: Trippstadter Straße 122, D-67663 Kaiserslautern Geschaeftsfuehrung: Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster (Vorsitzender) Dr. Walter Olthoff Vorsitzender des Aufsichtsrats: Prof. Dr. h.c. Hans A. Aukes Amtsgericht Kaiserslautern, HRB 2313 Sitz der Gesellschaft: Kaiserslautern (HRB 2313) USt-Id.Nr.: DE 148646973 Steuernummer: 19/673/0060/3 ----------------------------------------------------------------------- ::DISCLAIMER:: ---------------------------------------------------------------------------------------------------------------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects. ----------------------------------------------------------------------------------------------------------------------------------------------------
bitbake -e produces the following output. I have listed the methods dealing with .config.
do_kernel_configme() {
echo "[INFO] doing kernel configme"
export KMETA=${KMETA}
if [ -n ${KCONFIG_MODE} ]; then
configmeflags=${KCONFIG_MODE}
else
# If a defconfig was passed, use =n as the baseline, which is
achieved
# via --allnoconfig
if [ -f
/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/defconfig ]; then
configmeflags="--allnoconfig"
fi
fi cd/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/git PATH=/home/eich/yocto/poky/scripts:/home/eich/odroid/build/tmp/sysroots/x86_64-linux/usr/bin/armv7a-vfp-neon-poky-linux-gnueabi:/home/eich/odroid/build/tmp/sysroots/odroid-xu/usr/bin/crossscripts:/home/eich/odroid/build/tmp/sysroots/x86_64-linux/usr/sbin:/home/eich/odroid/build/tmp/sysroots/x86_64-linux/usr/bin:/home/eich/odroid/build/tmp/sysroots/x86_64-linux/sbin:/home/eich/odroid/build/tmp/sysroots/x86_64-linux/bin:/home/eich/yocto/poky/scripts:/home/eich/yocto/poky/bitbake/bin:/home/eich/ros_catkin_ws/install_isolated/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/home/eich/bin:/usr/local/java/jre1.7.0_55/bin:/home/eich/install/bin:/opt/toolchains/arm-eabi-4.6/bin:/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/git/scripts/util
configme ${configmeflags} --reconfig --output /home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/linux-odroid_xu-standard-build standard odroid-xu
if [ $? -ne 0 ]; then
echo "ERROR. Could not configure odroid-xu-standard"
exit 1
fi
echo "# Global settings from linux recipe" >>/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/linux-odroid_xu-standard-build/.config
echo "CONFIG_LOCALVERSION="\"-custom\" >>
/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/linux-odroid_xu-standard-build/.config
}
do_compile_kernelmodules() {
unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS MACHINE
if (grep -q -i -e '^CONFIG_MODULES=y$' .config); then
oe_runmake -j 4 modules CC="arm-poky-linux-gnueabi-gcc
-mno-thumb-interwork -marm" LD="arm-poky-linux-gnueabi-ld.bfd "
else
bbnote "no modules to compile"
fi
}
kernel_do_configure() {
# fixes extra + in /lib/modules/2.6.37+
# $ scripts/setlocalversion . => +
# $ make kernelversion => 2.6.37
# $ make kernelrelease => 2.6.37+
touch /home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/linux-odroid_xu-standard-build/.scmversion /home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/git/.scmversion
# Copy defconfig to .config if .config does not exist. This allows
# recipes to manage the .config themselves in do_configure_prepend().
if [ -f
"/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/defconfig" ] && [ ! -f "/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/linux-odroid_xu-standard-build/.config" ]; then
cp
"/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/defconfig" "/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/linux-odroid_xu-standard-build/.config"
fi
eval oe_runmake_call oldnoconfig || yes '' | oe_runmake oldconfig
install -m 0644
/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/git/arch/arm/configs/odroidxu_ubuntu_defconfig /home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/defconfig
install -m 0644 /home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/git/arch/arm/configs/odroidxu_ubuntu_defconfig /home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/git/.config
}
kernel_do_install() {
#
# First install the modules
# unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS MACHINE
if (grep -q -i -e '^CONFIG_MODULES=y$' .config); then
oe_runmake DEPMOD=echo
INSTALL_MOD_PATH="/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/image" modules_install
rm
"/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/image/lib/modules/None/build"
rm
"/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/image/lib/modules/None/source"
# If the kernel/ directory is empty remove it to prevent QA issues
rmdir --ignore-fail-on-non-empty
"/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/image/lib/modules/None/kernel"
else
bbnote "no modules to install"
fi
#
# Install various kernel output (zImage, map file, config, module
support files)
#
install -d /home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/image/boot
install -d/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/image/boot
install -m 0644 arch/arm/boot/uImage/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/image/boot/uImage-None
install -m 0644 System.map/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/image/boot/System.map-None
install -m 0644 .config
/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/image/boot/config-None
install -m 0644 vmlinux
/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/image/boot/vmlinux-None
[ -e Module.symvers ] && install -m 0644 Module.symvers /home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/image/boot/Module.symvers-None
install -d/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/image/etc/modules-load.d
install -d/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/image/etc/modprobe.d
#
# Support for external module building - create a minimal copy of the
# kernel source tree.
#
kerneldir=/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/image/usr/src/kernel
install -d $kerneldir
#
# Store the kernel version in sysroots for module-base.bbclass #
echo "None" > $kerneldir/kernel-abiversion
#
# Store kernel image name to allow use during image generation #
echo
"uImage--3.4.91+gitrAUTOINC+a26607bfa2-r0-odroid-xu-20140709123549" >$kerneldir/kernel-image-name
#
# Copy the entire source tree. In case an external build directory is
# used, copy the build directory over first, then copy over the source
# dir. This ensures the original Makefiles are used and not the
# redirecting Makefiles in the build directory.
#
find . -depth -not -name "*.cmd" -not -name "*.o" -not -path
"./Documentation*" -not -path "./source*" -not -path "./.*" -print0 | cpio --null -pdlu $kerneldir
cp .config $kerneldir
if [
"/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/git" != "/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/linux-odroid_xu-standard-build" ]; then
pwd="$PWD"
cd
"/home/eich/odroid/build/tmp/work/odroid_xu-poky-linux-gnueabi/linux-hardkernel/3.4.91+gitrAUTOINC+a26607bfa2-r0/git"
find . -depth -not -path "./Documentation*" -not -path "./.*" -print0 | cpio --null -pdlu $kerneldir
cd "$pwd"
fi
# Test to ensure that the output file and image type are not actually # the same file. If hardlinking is used, they will be the same, and
there's
# no need to install.
! [ arch/arm/boot/uImage -ef $kerneldir/uImage ] && install -m 0644
arch/arm/boot/uImage $kerneldir/uImage
install -m 0644 System.map $kerneldir/System.map-None # Dummy Makefile so the clean below works
mkdir $kerneldir/Documentation
touch $kerneldir/Documentation/Makefile
#
# Clean and remove files not needed for building modules.
# Some distributions go through a lot more trouble to strip out
# unecessary headers, for now, we just prune the obvious bits.
#
# We don't want to leave host-arch binaries in /sysroots, so
# we clean the scripts dir while leaving the generated config
# and include files.
#
oe_runmake -C $kerneldir CC="arm-poky-linux-gnueabi-gcc
-mno-thumb-interwork -marm" LD="arm-poky-linux-gnueabi-ld.bfd " clean _mrproper_scripts
# hide directories that shouldn't have their .c, s and S files deleted
for d in tools scripts lib; do
mv $kerneldir/$d $kerneldir/.$d
done # delete .c, .s and .S files, unless we hid a directory as .<dir>.
This technique is
# much faster than find -prune and -exec
find $kerneldir -not -path '*/\.*' -type f -name "*.[csS]" -delete # put the hidden dirs back
for d in tools scripts lib; do
mv $kerneldir/.$d $kerneldir/$d
done # As of Linux kernel version 3.0.1, the clean target removes # arch/powerpc/lib/crtsavres.o which is present in
# KBUILD_LDFLAGS_MODULE, making it required to build external modules. if [ arm = "powerpc" ]; then
cp -l arch/powerpc/lib/crtsavres.o$kerneldir/arch/powerpc/lib/crtsavres.o
fi
# Necessary for building modules like compat-wireless. if [ -f include/generated/bounds.h ]; then
cp -l include/generated/bounds.h$kerneldir/include/generated/bounds.h
fi
if [ -d arch/arm/include/generated ]; then
mkdir -p $kerneldir/arch/arm/include/generated/ cp -flR arch/arm/include/generated/*
$kerneldir/arch/arm/include/generated/
fi
# Remove the following binaries which cause strip or arch QA errors # during do_package for cross-compiled platforms bin_files="arch/powerpc/boot/addnote arch/powerpc/boot/hack-coff \
arch/powerpc/boot/mktree scripts/kconfig/zconf.tab.o \
scripts/kconfig/conf.o scripts/kconfig/kxgettext.o"
for entry in $bin_files; do
rm -f $kerneldir/$entry
done
# kernels <2.6.30 don't have $kerneldir/tools directory so we check
if it exists before calling sed
if [ -f $kerneldir/tools/perf/Makefile ]; then
# Fix SLANG_INC for slang.h
sed -i 's#-I/usr/include/slang#-I=/usr/include/slang#g'
$kerneldir/tools/perf/Makefile
fi
}
Quoted 127 lines · HCL Tech
Sorry, Markus.
Ignore my previous post. It has error.I think you need to check the output of "bitbake -e <recipe name>" and see how the .config file is created for your recipe. Based on that only we need to update the recipe.
Regards,
B.Sathish Kumar-----Original Message-----
From: Sathish Kumar Balasubramaniam-ERS, HCL Tech
Sent: Wednesday, July 09, 2014 5:54 PM
To: Dr. Markus Eich; [email protected]
Subject: RE: [yocto] How to select defconfig for kernel build with yocto/bitbakeOk. Can you try the following instead of the content I gave before
KERNEL_DEFCONFIG= "odroidxu_ubuntu_defconfig"kernel_do_configure_append() { install -m 0644 ${S}/arch/${ARCH}/configs/${KERNEL_DEFCONFIG} ${WORKDIR}/defconfig install -m 0644 ${S}/arch/${ARCH}/configs/${KERNEL_DEFCONFIG} ${S}/.config }Regards,
B.Sathish Kumar-----Original Message-----
From: Dr. Markus Eich [mailto:[email protected]]
Sent: Wednesday, July 09, 2014 5:39 PM
To: Sathish Kumar Balasubramaniam-ERS, HCL Tech; [email protected]
Subject: Re: [yocto] How to select defconfig for kernel build with yocto/bitbakeThank you Sathish for the quick answer.
The recipes now copies
odroidxu_ubuntu_defconfigto defconfig in the workdir, but it still seems to be ignored.
Maybe I am missing some includes to make the .config from defconfig?Using "make
odroidxu_ubuntu_defconfig" using cross compiling (followed by "make zImage") works fine, while bitbake virtual/kernel produces some errors which are probably due to the wrong .config.Cheers,
Markus
Quoted 73 lines · HCL Tech
Hi Markus,
Try adding the following to your recipe file
KERNEL_DEFCONFIG= "odroidxu_ubuntu_defconfig"do_configure_prepend() { install -m 0644 ${S}/arch/${ARCH}/configs/${KERNEL_DEFCONFIG} ${WORKDIR}/defconfig || die "No default configuration for ${MACHINE} / ${KERNEL_DEFCONFIG} available." }Regards,
B.Sathish Kumar-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Dr. Markus Eich
Sent: Wednesday, July 09, 2014 3:09 PM
To: [email protected]
Subject: [yocto] How to select defconfig for kernel build with yocto/bitbakeDear all,
I work on the process to compile odroid xu kernel with yocto/bitbake
In the kernel sources (from hardkernel) I have the corresponding defconfig file, i.e. in the git folder /arch/arm/configs/odroidxu_ubuntu_defconfig.
How can I tell bitbake in my recipe to use "
odroidxu_ubuntu_defconfig"?My recipe looks as follow:
===
require recipes-kernel/linux/linux-yocto.inc
KERNEL_IMAGETYPE= "uImage"
COMPATIBLE_MACHINE= "odroid-xu"
LINUX_VERSION= "3.4.91"LINUX_VERSION_EXTENSION= "-custom"
FILESEXTRAPATHS_prepend:= "${THISDIR}/linux-hardkernel-3.4:"S = "${WORKDIR}/git"
# from where to fetch the kernel KERNEL_REPO_OWNER ??= "hardkernel" KERNEL_REPO_URI ??= "git://github.com/${KERNEL_REPO_OWNER}/linux.git" KBRANCH = "odroidxu-3.4.y"SRCREV = "${AUTOREV}"
KV = "3.4.91"
PV = "${KV}+gitr${SRCPV}"
LOCALVERSION ?= ""SRC_URI = " \ ${KERNEL_REPO_URI};nocheckout=1;branch=${KBRANCH} \"
PACKAGES =+ "kernel-headers" FILES_kernel-headers = "${exec_prefix}/src/linux*"
===Cheers,
Markus
Signature · 35 lines
Dr.-Ing. Markus Eich Senior Researcher Marine Inspection Robotics Space Robotics Besuchsadresse der Nebengeschäftstelle: DFKI GmbH Robotics Innovation Center Robert-Hooke-Straße 5 28359 Bremen, Germany Postadresse der Hauptgeschäftsstelle Standort Bremen: DFKI GmbH Robotics Innovation Center Robert-Hooke-Straße 1 28359 Bremen, Germany Tel.: +49 421 178 45-4105 Zentrale: +49 421 178 45-0 Fax: +49 421 178 45-4150 (Faxe bitte namentlich kennzeichnen) E-Mail: [email protected] Weitere Informationen: http://www.dfki.de/robotik ----------------------------------------------------------------------- Deutsches Forschungszentrum fuer Kuenstliche Intelligenz GmbH Firmensitz: Trippstadter Straße 122, D-67663 Kaiserslautern Geschaeftsfuehrung: Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster (Vorsitzender) Dr. Walter Olthoff Vorsitzender des Aufsichtsrats: Prof. Dr. h.c. Hans A. Aukes Amtsgericht Kaiserslautern, HRB 2313 Sitz der Gesellschaft: Kaiserslautern (HRB 2313) USt-Id.Nr.: DE 148646973 Steuernummer: 19/673/0060/3 -----------------------------------------------------------------------
Quoted 9 lines · Dr. Markus Eich
Dear all,
I work on the process to compile odroid xu kernel with yocto/bitbake
In the kernel sources (from hardkernel) I have the corresponding defconfig file, i.e. in the git folder /arch/arm/configs/odroidxu_ubuntu_defconfig.
How can I tell bitbake in my recipe to use "
odroidxu_ubuntu_defconfig"?
To trigger the oe-core kernel processing to use the defconfig, you need to put that defconfig in your SRC_URI.
Which means you should grab a copy of that from the kernel tree, and in the same directory structure as your kernel recipe.
See meta-skeleton/recipes-kernel/linux/linux-yocto-custom.bb for an example.
Cheers,
Bruce
Quoted 44 lines
My recipe looks as follow:
===
require recipes-kernel/linux/linux-yocto.inc
KERNEL_IMAGETYPE= "uImage"
COMPATIBLE_MACHINE= "odroid-xu"
LINUX_VERSION= "3.4.91"LINUX_VERSION_EXTENSION= "-custom"
FILESEXTRAPATHS_prepend:= "${THISDIR}/linux-hardkernel-3.4:"S = "${WORKDIR}/git"
# from where to fetch the kernel KERNEL_REPO_OWNER ??= "hardkernel" KERNEL_REPO_URI ??= "git://github.com/${KERNEL_REPO_OWNER}/linux.git" KBRANCH = "odroidxu-3.4.y"SRCREV = "${AUTOREV}"
KV = "3.4.91"
PV = "${KV}+gitr${SRCPV}"
LOCALVERSION ?= ""SRC_URI = " \ ${KERNEL_REPO_URI};nocheckout=1;branch=${KBRANCH} \"
PACKAGES =+ "kernel-headers" FILES_kernel-headers = "${exec_prefix}/src/linux*"
===Cheers,
Markus
Thank you Bruce, that did the trick. But I am facing a new problem while using bitbake for the build process.
I have checked to build the odroid kernel with a standard crosscompiler tool chain and it works without any problems.
When I do the same with the bitbake toolchain (bitbake virtual/kernel), it somehow creates a recursive link in the folder
package/usr/src/kernel/drivers/gpu/arm/mali400/ump/arch/arch-release -> arch-release
This causes a crash in the build system.
Compilation runs fine though. This error seems to be within do_package. I have removed the link, but somehow it is created automatically.
Any ideas?
/Markus
Quoted 70 lines · Bruce Ashfield
Quoted 9 lines · Dr. Markus Eich
Dear all,
I work on the process to compile odroid xu kernel with yocto/bitbake
In the kernel sources (from hardkernel) I have the corresponding defconfig file, i.e. in the git folder /arch/arm/configs/odroidxu_ubuntu_defconfig.
How can I tell bitbake in my recipe to use "
odroidxu_ubuntu_defconfig"?To trigger the oe-core kernel processing to use the defconfig, you need to put that defconfig in your
SRC_URI.Which means you should grab a copy of that from the kernel tree, and in the same directory structure as your kernel recipe.
See meta-skeleton/recipes-kernel/linux/linux-yocto-custom.bb for an example.
Cheers,
Bruce
Quoted 44 lines
My recipe looks as follow:
===
require recipes-kernel/linux/linux-yocto.inc
KERNEL_IMAGETYPE= "uImage"
COMPATIBLE_MACHINE= "odroid-xu"
LINUX_VERSION= "3.4.91"LINUX_VERSION_EXTENSION= "-custom"
FILESEXTRAPATHS_prepend:= "${THISDIR}/linux-hardkernel-3.4:"S = "${WORKDIR}/git"
# from where to fetch the kernel KERNEL_REPO_OWNER ??= "hardkernel" KERNEL_REPO_URI ??= "git://github.com/${KERNEL_REPO_OWNER}/linux.git" KBRANCH = "odroidxu-3.4.y"SRCREV = "${AUTOREV}"
KV = "3.4.91"
PV = "${KV}+gitr${SRCPV}"
LOCALVERSION ?= ""SRC_URI = " \ ${KERNEL_REPO_URI};nocheckout=1;branch=${KBRANCH} \"
PACKAGES =+ "kernel-headers" FILES_kernel-headers = "${exec_prefix}/src/linux*"
===Cheers,
Markus
Signature · 33 lines
Dr.-Ing. Markus Eich Senior Researcher Marine Inspection Robotics Space Robotics Besuchsadresse der Nebengeschäftstelle: DFKI GmbH Robotics Innovation Center Robert-Hooke-Straße 5 28359 Bremen, Germany Postadresse der Hauptgeschäftsstelle Standort Bremen: DFKI GmbH Robotics Innovation Center Robert-Hooke-Straße 1 28359 Bremen, Germany Tel.: +49 421 178 45-4105 Zentrale: +49 421 178 45-0 Fax: +49 421 178 45-4150 (Faxe bitte namentlich kennzeichnen) E-Mail: [email protected] Weitere Informationen: http://www.dfki.de/robotik ----------------------------------------------------------------------- Deutsches Forschungszentrum fuer Kuenstliche Intelligenz GmbH Firmensitz: Trippstadter Straße 122, D-67663 Kaiserslautern Geschaeftsfuehrung: Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster (Vorsitzender) Dr. Walter Olthoff Vorsitzender des Aufsichtsrats: Prof. Dr. h.c. Hans A. Aukes Amtsgericht Kaiserslautern, HRB 2313 Sitz der Gesellschaft: Kaiserslautern (HRB 2313) USt-Id.Nr.: DE 148646973 Steuernummer: 19/673/0060/3 -----------------------------------------------------------------------
Quoted 12 lines · Dr. Markus Eich
Thank you Bruce, that did the trick. But I am facing a new problem while using bitbake for the build process.
I have checked to build the odroid kernel with a standard crosscompiler tool chain and it works without any problems.
When I do the same with the bitbake toolchain (bitbake virtual/kernel), it somehow creates a recursive link in the folder
package/usr/src/kernel/drivers/gpu/arm/mali400/ump/arch/arch-release -> arch-release
Quoted 6 lines
This causes a crash in the build system.
Compilation runs fine though. This error seems to be within
do_package. I have removed the link, but somehow it is created automatically.Any ideas?
Nothing off the top of my head. That link would be created by the kernel build, and not by bitbake or the oe-core kernel build classes.
I'd start by looking at the kernel's makefiles and seeing where the link is being created.
Do specific tasks work ? i.e. is that happening during unpack/patch, or during compilation.
Bruce
Quoted 77 lines
/Markus
Quoted 70 lines · Bruce Ashfield
Quoted 9 lines · Dr. Markus Eich
Dear all,
I work on the process to compile odroid xu kernel with yocto/bitbake
In the kernel sources (from hardkernel) I have the corresponding defconfig file, i.e. in the git folder /arch/arm/configs/odroidxu_ubuntu_defconfig.
How can I tell bitbake in my recipe to use "
odroidxu_ubuntu_defconfig"?To trigger the oe-core kernel processing to use the defconfig, you need to put that defconfig in your
SRC_URI.Which means you should grab a copy of that from the kernel tree, and in the same directory structure as your kernel recipe.
See meta-skeleton/recipes-kernel/linux/linux-yocto-custom.bb for an example.
Cheers,
Bruce
Quoted 44 lines
My recipe looks as follow:
===
require recipes-kernel/linux/linux-yocto.inc
KERNEL_IMAGETYPE= "uImage"
COMPATIBLE_MACHINE= "odroid-xu"
LINUX_VERSION= "3.4.91"LINUX_VERSION_EXTENSION= "-custom"
FILESEXTRAPATHS_prepend:= "${THISDIR}/linux-hardkernel-3.4:"S = "${WORKDIR}/git"
# from where to fetch the kernel KERNEL_REPO_OWNER ??= "hardkernel" KERNEL_REPO_URI ??= "git://github.com/${KERNEL_REPO_OWNER}/linux.git" KBRANCH = "odroidxu-3.4.y"SRCREV = "${AUTOREV}"
KV = "3.4.91"
PV = "${KV}+gitr${SRCPV}"
LOCALVERSION ?= ""SRC_URI = " \ ${KERNEL_REPO_URI};nocheckout=1;branch=${KBRANCH} \"
PACKAGES =+ "kernel-headers" FILES_kernel-headers = "${exec_prefix}/src/linux*"
===Cheers,
Markus
I have tried the different task separately.
do_fetch works, no recursive link created do_kernel_checkout works, no recursive link created do_kernel_configme works, no recursive link created do_compile works, no recursive link created do_compile_kernelmodules works, no recursive link created do_install works, no recursive link created
do_package : Here it crashes. Th package subfolder is created and here it creates the recursive link within the subfolder.
What does do_package do in detail? How can I further analyze the error.
/Markus
Quoted 109 lines · Bruce Ashfield
Quoted 12 lines · Dr. Markus Eich
Thank you Bruce, that did the trick. But I am facing a new problem while using bitbake for the build process.
I have checked to build the odroid kernel with a standard crosscompiler tool chain and it works without any problems.
When I do the same with the bitbake toolchain (bitbake virtual/kernel), it somehow creates a recursive link in the folder
package/usr/src/kernel/drivers/gpu/arm/mali400/ump/arch/arch-release -> arch-release
Quoted 6 lines
This causes a crash in the build system.
Compilation runs fine though. This error seems to be within
do_package. I have removed the link, but somehow it is created automatically.Any ideas?
Nothing off the top of my head. That link would be created by the kernel build, and not by bitbake or the oe-core kernel build classes.
I'd start by looking at the kernel's makefiles and seeing where the link is being created.
Do specific tasks work ? i.e. is that happening during unpack/patch, or during compilation.
Bruce
Quoted 77 lines
/Markus
Quoted 70 lines · Bruce Ashfield
Quoted 9 lines · Dr. Markus Eich
Dear all,
I work on the process to compile odroid xu kernel with yocto/bitbake
In the kernel sources (from hardkernel) I have the corresponding defconfig file, i.e. in the git folder /arch/arm/configs/odroidxu_ubuntu_defconfig.
How can I tell bitbake in my recipe to use "
odroidxu_ubuntu_defconfig"?To trigger the oe-core kernel processing to use the defconfig, you need to put that defconfig in your
SRC_URI.Which means you should grab a copy of that from the kernel tree, and in the same directory structure as your kernel recipe.
See meta-skeleton/recipes-kernel/linux/linux-yocto-custom.bb for an example.
Cheers,
Bruce
Quoted 44 lines
My recipe looks as follow:
===
require recipes-kernel/linux/linux-yocto.inc
KERNEL_IMAGETYPE= "uImage"
COMPATIBLE_MACHINE= "odroid-xu"
LINUX_VERSION= "3.4.91"LINUX_VERSION_EXTENSION= "-custom"
FILESEXTRAPATHS_prepend:= "${THISDIR}/linux-hardkernel-3.4:"S = "${WORKDIR}/git"
# from where to fetch the kernel KERNEL_REPO_OWNER ??= "hardkernel" KERNEL_REPO_URI ??= "git://github.com/${KERNEL_REPO_OWNER}/linux.git" KBRANCH = "odroidxu-3.4.y"SRCREV = "${AUTOREV}"
KV = "3.4.91"
PV = "${KV}+gitr${SRCPV}"
LOCALVERSION ?= ""SRC_URI = " \ ${KERNEL_REPO_URI};nocheckout=1;branch=${KBRANCH} \"
PACKAGES =+ "kernel-headers" FILES_kernel-headers = "${exec_prefix}/src/linux*"
===Cheers,
Markus
Signature · 35 lines
Dr.-Ing. Markus Eich Senior Researcher Marine Inspection Robotics Space Robotics Besuchsadresse der Nebengeschäftstelle: DFKI GmbH Robotics Innovation Center Robert-Hooke-Straße 5 28359 Bremen, Germany Postadresse der Hauptgeschäftsstelle Standort Bremen: DFKI GmbH Robotics Innovation Center Robert-Hooke-Straße 1 28359 Bremen, Germany Tel.: +49 421 178 45-4105 Zentrale: +49 421 178 45-0 Fax: +49 421 178 45-4150 (Faxe bitte namentlich kennzeichnen) E-Mail: [email protected] Weitere Informationen: http://www.dfki.de/robotik ----------------------------------------------------------------------- Deutsches Forschungszentrum fuer Kuenstliche Intelligenz GmbH Firmensitz: Trippstadter Straße 122, D-67663 Kaiserslautern Geschaeftsfuehrung: Prof. Dr. Dr. h.c. mult. Wolfgang Wahlster (Vorsitzender) Dr. Walter Olthoff Vorsitzender des Aufsichtsrats: Prof. Dr. h.c. Hans A. Aukes Amtsgericht Kaiserslautern, HRB 2313 Sitz der Gesellschaft: Kaiserslautern (HRB 2313) USt-Id.Nr.: DE 148646973 Steuernummer: 19/673/0060/3 -----------------------------------------------------------------------
Quoted 8 lines · Dr. Markus Eich
I have tried the different task separately.
do_fetchworks, no recursive link createddo_kernel_checkoutworks, no recursive link createddo_kernel_configmeworks, no recursive link createddo_compileworks, no recursive link createddo_compile_kernelmodulesworks, no recursive link createddo_installworks, no recursive link created
There's no recursive link, but is the arch-release link created, but pointing somewhere else ?
Quoted 5 lines
do_package: Here it crashes. Th package subfolder is created and here it creates the recursive link within the subfolder.What does
do_packagedo in detail? How can I further analyze the error.
Interesting. There's nothing custom in the kernel for packaging, and nothing that I can think would be creating that symlink.
No good ideas at the moment, outside of pinpointing exactly where the link is created, and when it transitions to a recursive one .. and I'd do that by instrumentation.
Bruce
Quoted 118 lines
/Markus
Quoted 110 lines · Bruce Ashfield
Quoted 12 lines · Dr. Markus Eich
Thank you Bruce, that did the trick. But I am facing a new problem while using bitbake for the build process.
I have checked to build the odroid kernel with a standard crosscompiler tool chain and it works without any problems.
When I do the same with the bitbake toolchain (bitbake virtual/kernel), it somehow creates a recursive link in the folder
package/usr/src/kernel/drivers/gpu/arm/mali400/ump/arch/arch-release -> arch-release
Quoted 6 lines
This causes a crash in the build system.
Compilation runs fine though. This error seems to be within
do_package. I have removed the link, but somehow it is created automatically.Any ideas?
Nothing off the top of my head. That link would be created by the kernel build, and not by bitbake or the oe-core kernel build classes.
I'd start by looking at the kernel's makefiles and seeing where the link is being created.
Do specific tasks work ? i.e. is that happening during unpack/patch, or during compilation.
Bruce
Quoted 78 lines
/Markus
Quoted 71 lines · Bruce Ashfield
Quoted 10 lines · Dr. Markus Eich
Dear all,
I work on the process to compile odroid xu kernel with yocto/bitbake
In the kernel sources (from hardkernel) I have the corresponding defconfig file, i.e. in the git folder /arch/arm/configs/odroidxu_ubuntu_defconfig.
How can I tell bitbake in my recipe to use
"odroidxu_ubuntu_defconfig"?To trigger the oe-core kernel processing to use the defconfig, you need to put that defconfig in your
SRC_URI.Which means you should grab a copy of that from the kernel tree, and in the same directory structure as your kernel recipe.
See meta-skeleton/recipes-kernel/linux/linux-yocto-custom.bb for an example.
Cheers,
Bruce
Quoted 44 lines
My recipe looks as follow:
===
require recipes-kernel/linux/linux-yocto.inc
KERNEL_IMAGETYPE= "uImage"
COMPATIBLE_MACHINE= "odroid-xu"
LINUX_VERSION= "3.4.91"LINUX_VERSION_EXTENSION= "-custom"
FILESEXTRAPATHS_prepend:= "${THISDIR}/linux-hardkernel-3.4:"S = "${WORKDIR}/git"
# from where to fetch the kernel KERNEL_REPO_OWNER ??= "hardkernel" KERNEL_REPO_URI ??= "git://github.com/${KERNEL_REPO_OWNER}/linux.git" KBRANCH = "odroidxu-3.4.y"SRCREV = "${AUTOREV}"
KV = "3.4.91"
PV = "${KV}+gitr${SRCPV}"
LOCALVERSION ?= ""SRC_URI = " \ ${KERNEL_REPO_URI};nocheckout=1;branch=${KBRANCH} \"
PACKAGES =+ "kernel-headers" FILES_kernel-headers = "${exec_prefix}/src/linux*"
===Cheers,
Markus