Skip to contentSkip to conversation

bcache-tools: Adding package.

PATCH Superseded Jean-Christophe DUBOIS 2 participants 3 messages Aug 5, 2014

v4 of 8 Superseded Latest is v8 →

lore
Share & tools
lore
#0 lore raw

PATCH v4 1/1 bcache-tools: Adding package.

This is the bcache tools, required to setup the linux bcache feature of the Linux kernel.

---
Changes v1 to v2
* remove 'support' word from comment statement in Config.in.
* use github helper to get the project site instead of hardcoded URL.
Changes v2 to v3
* Added bcache-tools description in Config help
* Added bcache-tools URL in Config help
* Added BR2_LARGEFILE BR2_USE_WCHAR and BR2_USE_MMU dependencies in Config.
* Added BR2_PACKAGE_UTIL_LINUX selection in Config
* Added new requirements in Config comment.
* use POST_EXTRACT_HOOKS to modify Makefile
* pass $(TARGET_CONFIGURE_OPTS) in env variables to $(MAKE)
* create man8 dir as part of PRE_INSTALL_TARGET_HOOKS
Changes v3 to v4
* move from .zip file to .tar.gz as download file in .mk file
* use complete git tag as version in .mk file.
* remove explicit extract rule from .mk file (use implicite rule).

---
 package/Config.in                    |  1 +
 package/bcache-tools/Config.in       | 22 ++++++++++++++++++++
 package/bcache-tools/bcache-tools.mk | 40 ++++++++++++++++++++++++++++++++++++
 3 files changed, 63 insertions(+)
 create mode 100644 package/bcache-tools/Config.in
 create mode 100644 package/bcache-tools/bcache-tools.mk
package/Config.in +1 -0
index 4520ba6..dc2f418 100644
@@ -280,6 +280,7 @@ endmenu
 	source "package/a10disp/Config.in"
 	source "package/acpid/Config.in"
 	source "package/avrdude/Config.in"
+	source "package/bcache-tools/Config.in"
 	source "package/cdrkit/Config.in"
 	source "package/cryptsetup/Config.in"
 	source "package/cwiid/Config.in"
package/bcache-tools/Config.in new file +22 -0
new file mode 100644
index 0000000..383ba1f
@@ -0,0 +1,22 @@
+config BR2_PACKAGE_BCACHE_TOOLS
+	bool "bcache tools"
+	depends on BR2_PACKAGE_HAS_UDEV
+	depends on BR2_LARGEFILE # util-linux
+	depends on BR2_USE_WCHAR # util-linux
+	depends on BR2_USE_MMU # util-linux (libblkid)
+	select BR2_PACKAGE_UTIL_LINUX
+	select BR2_PACKAGE_UTIL_LINUX_LIBUUID
+	select BR2_PACKAGE_UTIL_LINUX_LIBBLKID
+	help
+	  Bcache is a Linux kernel block layer cache. It allows one or
+	  more fast disk drives such as flash-based solid state drives (SSDs)
+	  to act as a cache for one or more slower hard disk drives.
+
+	  http://bcache.evilpiepirate.org/
+
+	  This is the user space bcache tools, required to setup the linux
+	  bcache feature of the Linux kernel.
+
+comment "bcache-tools needs udev /dev management and a toolchain w/ largefile, wchar"
+	depends on BR2_USE_MMU
+        depends on !BR2_PACKAGE_HAS_UDEV || !BR2_LARGEFILE || !BR2_USE_WCHAR
package/bcache-tools/bcache-tools.mk new file +40 -0
new file mode 100644
index 0000000..31fa1ab
@@ -0,0 +1,40 @@
+################################################################################
+#
+# bcache-tools
+#
+################################################################################
+
+BCACHE_TOOLS_VERSION = v1.0.7
+BCACHE_TOOLS_SITE = $(call github,g2p,bcache-tools,$(BCACHE_TOOLS_VERSION))
+BCACHE_TOOLS_SOURCE = $(BCACHE_TOOLS_VERSION).tar.gz
+BCACHE_TOOLS_LICENSE = GPLv2
+BCACHE_TOOLS_LICENSE_FILES = COPYING
+BCACHE_TOOLS_DEPENDENCIES = host-pkgconf util-linux eudev
+
+# We need to use the BR2 host pkg-config binary in the Makefile
+define BCACHE_TOOLS_FIX_PKGCONFIG
+	$(SED) 's^`pkg-config^`$(PKG_CONFIG_HOST_BINARY)^' \
+		$(BCACHE_TOOLS_DIR)/Makefile
+endef
+
+BCACHE_TOOLS_POST_EXTRACT_HOOKS += BCACHE_TOOLS_FIX_PKGCONFIG
+
+# We pass $(TARGET_CONFIGURE_OPTS) as environment variable to allow
+# the bcache-tools Makefile to alter CFLAGS
+define BCACHE_TOOLS_BUILD_CMDS
+	$(TARGET_MAKE_ENV) $(TARGET_CONFIGURE_OPTS) $(MAKE) -C $(@D)
+endef
+
+# The bcache-tools Makefile expects the man8 directory to exist.
+define BCACHE_TOOLS_INSTALL_MAN8
+	$(INSTALL) -m 0755 -d $(TARGET_DIR)/usr/share/man/man8
+endef
+
+BCACHE_TOOLS_PRE_INSTALL_TARGET_HOOKS += BCACHE_TOOLS_INSTALL_MAN8
+
+define BCACHE_TOOLS_INSTALL_TARGET_CMDS
+	$(TARGET_MAKE_ENV) $(TARGET_CONFIGURE_OPTS) $(MAKE) -C $(@D) \
+		DESTDIR=$(TARGET_DIR) install
+endef
+
+$(eval $(generic-package))
Signature · 1 line
1.9.1
#1 lore raw

PATCH v4 1/1 bcache-tools: Adding package.

Hi Jean-Christophe,

Quoted 75 lines

This is the bcache tools, required to setup the linux bcache feature of the Linux kernel.

---
Changes v1 to v2
* remove 'support' word from comment statement in Config.in.
* use github helper to get the project site instead of hardcoded URL.
Changes v2 to v3
* Added bcache-tools description in Config help
* Added bcache-tools URL in Config help
* Added BR2_LARGEFILE BR2_USE_WCHAR and BR2_USE_MMU dependencies in Config.
* Added BR2_PACKAGE_UTIL_LINUX selection in Config
* Added new requirements in Config comment.
* use POST_EXTRACT_HOOKS to modify Makefile
* pass $(TARGET_CONFIGURE_OPTS) in env variables to $(MAKE)
* create man8 dir as part of PRE_INSTALL_TARGET_HOOKS
Changes v3 to v4
* move from .zip file to .tar.gz as download file in .mk file
* use complete git tag as version in .mk file.
* remove explicit extract rule from .mk file (use implicite rule).

---
  package/Config.in                    |  1 +
  package/bcache-tools/Config.in       | 22 ++++++++++++++++++++
  package/bcache-tools/bcache-tools.mk | 40 ++++++++++++++++++++++++++++++++++++
  3 files changed, 63 insertions(+)

create mode 100644 package/bcache-tools/Config.in create mode 100644 package/bcache-tools/bcache-tools.mk

package/Config.in +1 -0
index 4520ba6..dc2f418 100644
@@ -280,6 +280,7 @@ endmenu
  	source "package/a10disp/Config.in"
  	source "package/acpid/Config.in"
  	source "package/avrdude/Config.in"
+	source "package/bcache-tools/Config.in"
  	source "package/cdrkit/Config.in"
  	source "package/cryptsetup/Config.in"
  	source "package/cwiid/Config.in"
package/bcache-tools/Config.in new file +22 -0
new file mode 100644
index 0000000..383ba1f
@@ -0,0 +1,22 @@
+config BR2_PACKAGE_BCACHE_TOOLS
+	bool "bcache tools"
+	depends on BR2_PACKAGE_HAS_UDEV
+	depends on BR2_LARGEFILE # util-linux
+	depends on BR2_USE_WCHAR # util-linux
+	depends on BR2_USE_MMU # util-linux (libblkid)
+	select BR2_PACKAGE_UTIL_LINUX
+	select BR2_PACKAGE_UTIL_LINUX_LIBUUID
+	select BR2_PACKAGE_UTIL_LINUX_LIBBLKID
+	help
+	  Bcache is a Linux kernel block layer cache. It allows one or
+	  more fast disk drives such as flash-based solid state drives (SSDs)
+	  to act as a cache for one or more slower hard disk drives.
+
+	  http://bcache.evilpiepirate.org/
+
+	  This is the user space bcache tools, required to setup the linux
+	  bcache feature of the Linux kernel.
+
+comment "bcache-tools needs udev /dev management and a toolchain w/ largefile, wchar"
+	depends on BR2_USE_MMU
+        depends on !BR2_PACKAGE_HAS_UDEV || !BR2_LARGEFILE || !BR2_USE_WCHAR
package/bcache-tools/bcache-tools.mk new file +0 -0
new file mode 100644
index 0000000..31fa1ab

package/bcache-tools/bcache-tools.mk line 9

Quoted 9 lines
package/bcache-tools/bcache-tools.mk new file +9 -0
@@ -0,0 +1,40 @@
+################################################################################
+#
+# bcache-tools
+#
+################################################################################
+
+BCACHE_TOOLS_VERSION = v1.0.7
+BCACHE_TOOLS_SITE = $(call github,g2p,bcache-tools,$(BCACHE_TOOLS_VERSION))
+BCACHE_TOOLS_SOURCE = $(BCACHE_TOOLS_VERSION).tar.gz

This last line should be

BCACHE_TOOLS_SOURCE = bcache-tools-$(BCACHE_TOOLS_VERSION).tar.gz

but because this is default value, so this line is not needed. I proposed this in my first email.

Regards,
Jerzy

Quoted 31 lines
package/bcache-tools/bcache-tools.mk new file +31 -0
+BCACHE_TOOLS_LICENSE = GPLv2
+BCACHE_TOOLS_LICENSE_FILES = COPYING
+BCACHE_TOOLS_DEPENDENCIES = host-pkgconf util-linux eudev
+
+# We need to use the BR2 host pkg-config binary in the Makefile
+define BCACHE_TOOLS_FIX_PKGCONFIG
+	$(SED) 's^`pkg-config^`$(PKG_CONFIG_HOST_BINARY)^' \
+		$(BCACHE_TOOLS_DIR)/Makefile
+endef
+
+BCACHE_TOOLS_POST_EXTRACT_HOOKS += BCACHE_TOOLS_FIX_PKGCONFIG
+
+# We pass $(TARGET_CONFIGURE_OPTS) as environment variable to allow
+# the bcache-tools Makefile to alter CFLAGS
+define BCACHE_TOOLS_BUILD_CMDS
+	$(TARGET_MAKE_ENV) $(TARGET_CONFIGURE_OPTS) $(MAKE) -C $(@D)
+endef
+
+# The bcache-tools Makefile expects the man8 directory to exist.
+define BCACHE_TOOLS_INSTALL_MAN8
+	$(INSTALL) -m 0755 -d $(TARGET_DIR)/usr/share/man/man8
+endef
+
+BCACHE_TOOLS_PRE_INSTALL_TARGET_HOOKS += BCACHE_TOOLS_INSTALL_MAN8
+
+define BCACHE_TOOLS_INSTALL_TARGET_CMDS
+	$(TARGET_MAKE_ENV) $(TARGET_CONFIGURE_OPTS) $(MAKE) -C $(@D) \
+		DESTDIR=$(TARGET_DIR) install
+endef
+
+$(eval $(generic-package))
#2 lore raw

PATCH v4 1/1 bcache-tools: Adding package.

Le 08/05/2014 04:36 PM, Jerzy Grzegorek a ?crit :

Quoted 100 lines

Hi Jean-Christophe,

Quoted 92 lines

This is the bcache tools, required to setup the linux bcache feature of the Linux kernel.

---
Changes v1 to v2
* remove 'support' word from comment statement in Config.in.
* use github helper to get the project site instead of hardcoded URL.
Changes v2 to v3
* Added bcache-tools description in Config help
* Added bcache-tools URL in Config help
* Added BR2_LARGEFILE BR2_USE_WCHAR and BR2_USE_MMU dependencies in
Config.
* Added BR2_PACKAGE_UTIL_LINUX selection in Config
* Added new requirements in Config comment.
* use POST_EXTRACT_HOOKS to modify Makefile
* pass $(TARGET_CONFIGURE_OPTS) in env variables to $(MAKE)
* create man8 dir as part of PRE_INSTALL_TARGET_HOOKS
Changes v3 to v4
* move from .zip file to .tar.gz as download file in .mk file
* use complete git tag as version in .mk file.
* remove explicit extract rule from .mk file (use implicite rule).

---
  package/Config.in                    |  1 +
  package/bcache-tools/Config.in       | 22 ++++++++++++++++++++
  package/bcache-tools/bcache-tools.mk | 40 
++++++++++++++++++++++++++++++++++++
  3 files changed, 63 insertions(+)

create mode 100644 package/bcache-tools/Config.in create mode 100644 package/bcache-tools/bcache-tools.mk

package/Config.in +1 -0
index 4520ba6..dc2f418 100644
@@ -280,6 +280,7 @@ endmenu
      source "package/a10disp/Config.in"
      source "package/acpid/Config.in"
      source "package/avrdude/Config.in"
+    source "package/bcache-tools/Config.in"
      source "package/cdrkit/Config.in"
      source "package/cryptsetup/Config.in"
      source "package/cwiid/Config.in"
package/bcache-tools/Config.in new file +12 -0
new file mode 100644
index 0000000..383ba1f
@@ -0,0 +1,22 @@
+config BR2_PACKAGE_BCACHE_TOOLS
+    bool "bcache tools"
+    depends on BR2_PACKAGE_HAS_UDEV
+    depends on BR2_LARGEFILE # util-linux
+    depends on BR2_USE_WCHAR # util-linux
+    depends on BR2_USE_MMU # util-linux (libblkid)
+    select BR2_PACKAGE_UTIL_LINUX
+    select BR2_PACKAGE_UTIL_LINUX_LIBUUID
+    select BR2_PACKAGE_UTIL_LINUX_LIBBLKID
+    help
+      Bcache is a Linux kernel block layer cache. It allows one or
+      more fast disk drives such as flash-based solid state drives 

(SSDs)

package/bcache-tools/Config.in new file +8 -0
+      to act as a cache for one or more slower hard disk drives.
+
+      http://bcache.evilpiepirate.org/
+
+      This is the user space bcache tools, required to setup the linux
+      bcache feature of the Linux kernel.
+
+comment "bcache-tools needs udev /dev management and a toolchain w/ 

largefile, wchar"

package/bcache-tools/Config.in new file +2 -0
+    depends on BR2_USE_MMU
+        depends on !BR2_PACKAGE_HAS_UDEV || !BR2_LARGEFILE || 

!BR2_USE_WCHAR

package/bcache-tools/bcache-tools.mk new file +8 -0
new file mode 100644
index 0000000..31fa1ab
@@ -0,0 +1,40 @@
+################################################################################ 
 
+#
+# bcache-tools
+#
+################################################################################ 
 
+
+BCACHE_TOOLS_VERSION = v1.0.7
+BCACHE_TOOLS_SITE = $(call 
Quoted 2 lines

github,g2p,bcache-tools,$(BCACHE_TOOLS_VERSION)) +BCACHE_TOOLS_SOURCE = $(BCACHE_TOOLS_VERSION).tar.gz

This last line should be

Quoted 4 lines

BCACHE_TOOLS_SOURCE = bcache-tools-$(BCACHE_TOOLS_VERSION).tar.gz

but because this is default value, so this line is not needed. I proposed this in my first email.

OK, il looks like the magic is working ...

JC

Quoted 37 lines

Regards,
Jerzy

Quoted 31 lines
package/bcache-tools/bcache-tools.mk new file +31 -0
+BCACHE_TOOLS_LICENSE = GPLv2
+BCACHE_TOOLS_LICENSE_FILES = COPYING
+BCACHE_TOOLS_DEPENDENCIES = host-pkgconf util-linux eudev
+
+# We need to use the BR2 host pkg-config binary in the Makefile
+define BCACHE_TOOLS_FIX_PKGCONFIG
+    $(SED) 's^`pkg-config^`$(PKG_CONFIG_HOST_BINARY)^' \
+        $(BCACHE_TOOLS_DIR)/Makefile
+endef
+
+BCACHE_TOOLS_POST_EXTRACT_HOOKS += BCACHE_TOOLS_FIX_PKGCONFIG
+
+# We pass $(TARGET_CONFIGURE_OPTS) as environment variable to allow
+# the bcache-tools Makefile to alter CFLAGS
+define BCACHE_TOOLS_BUILD_CMDS
+    $(TARGET_MAKE_ENV) $(TARGET_CONFIGURE_OPTS) $(MAKE) -C $(@D)
+endef
+
+# The bcache-tools Makefile expects the man8 directory to exist.
+define BCACHE_TOOLS_INSTALL_MAN8
+    $(INSTALL) -m 0755 -d $(TARGET_DIR)/usr/share/man/man8
+endef
+
+BCACHE_TOOLS_PRE_INSTALL_TARGET_HOOKS += BCACHE_TOOLS_INSTALL_MAN8
+
+define BCACHE_TOOLS_INSTALL_TARGET_CMDS
+    $(TARGET_MAKE_ENV) $(TARGET_CONFIGURE_OPTS) $(MAKE) -C $(@D) \
+        DESTDIR=$(TARGET_DIR) install
+endef
+
+$(eval $(generic-package))