hwmon: (tmp103) Remove duplicate test for I2C_FUNC_SMBUS_BYTE_DATA functionalit

Since commit b42261078a91 ("regmap: i2c: fallback to SMBus if the adapter does not support standard I2C"), regmap-i2c will check the I2C_FUNC_SMBUS_[BYTE|WORD]_DATA functionality based on the regmap_config setting if the adapter does not support standard I2C.

So remove the I2C_FUNC_SMBUS_BYTE_DATA functionality check in the driver code.

---
 drivers/hwmon/tmp103.c | 7 -------
 1 file changed, 7 deletions(-)

index c74d2da..e42964f 100644
@@ -131,13 +131,6 @@ static int tmp103_probe(struct i2c_client *client,
 	struct regmap *regmap;
 	int ret;
 
-	if (!i2c_check_functionality(client->adapter,
-				     I2C_FUNC_SMBUS_BYTE_DATA)) {
-		dev_err(&client->dev,
-			"adapter doesn't support SMBus byte transactions\n");
-		return -ENODEV;
-	}
-
 	regmap = devm_regmap_init_i2c(client, &tmp103_regmap_config);
 	if (IS_ERR(regmap)) {
 		dev_err(dev, "failed to allocate register map\n");

1.9.1




_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

Applied.

Thanks,
Guenter

_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors