Several static analizer fixes
Subsystems (24)
cover Several static analizer fixes
There are several small issues reported by static analyzers. Let's fix some of them on this patch series. One of this patch is a real bug (dmxdev one, at patch 01/46).
The other ones are just code cleanups.
The main goal is to be able to run a static analyzer test more frequently, so we want to have a cleaner report.
Mauro Carvalho Chehab (46):
[media] dmxdev: don't use before checking file->private_data [media] marvel-ccic: don't initialize static vars with 0 [media] soc_camera: use kmemdup()
[media] vivid-vid-out: use memdup_user()
[media] s5k5baf: remove an uneeded semicolon [media] bttv-driver: remove an uneeded semicolon [media] soc_camera: remove uneeded semicolons [media] stv0900_core: don't allocate a temporary var [media] em28xx: use true/false for boolean vars [media] tuner-core: use true/false for boolean vars [media] af9013: use true/false for boolean vars [media] cxd2820r: use true/false for boolean vars [media] m88ds3103: use true/false for boolean vars [media] af9013: use true/false for boolean vars [media] tda10071: use true/false for boolean vars [media] smiapp-core: use true/false for boolean vars [media] ov9740: use true/false for boolean vars [media] omap3isp: use true/false for boolean vars [media] ti-vpe: use true/false for boolean vars [media] vivid-tpg: use true/false for boolean vars [media] radio: use true/false for boolean vars [media] ene_ir: use true/false for boolean vars [media] au0828-dvb: use true/false for boolean vars [media] lmedm04: use true/false for boolean vars [media] af9005: use true/false for boolean vars [media] msi2500: simplify boolean tests
[media] drxk_hard: simplify test logic
[media] lm3560: simplify boolean tests
[media] lm3560: simplify a boolean test
[media] omap: simplify test logic
[media] via-camera: simplify boolean tests
[media] e4000: simplify boolean tests
[media] s5p-tv: Simplify the return logic
[media] siano: just return 0 instead of using a var [media] stv0367: just return 0 instead of using a var [media] media-devnode: just return 0 instead of using a var [media] bt8xx: just return 0 instead of using a var [media] saa7164: just return 0 instead of using a var [media] davinci: just return 0 instead of using a var [media] marvel-ccic: just return 0 instead of using a var [media] fintek-cir: just return 0 instead of using a var [media] ite-cir: just return 0 instead of using a var [media] nuvoton-cir: just return 0 instead of using a var [media] mt2060: just return 0 instead of using a var [media] mxl5005s: just return 0 instead of using a var [media] cx231xx: just return 0 instead of using a var
drivers/media/common/siano/smscoreapi.c | 4 +-- drivers/media/dvb-core/dmxdev.c | 3 +- drivers/media/dvb-frontends/af9013.c | 24 +++++++-------- drivers/media/dvb-frontends/cxd2820r_c.c | 4 +-- drivers/media/dvb-frontends/cxd2820r_core.c | 4 +-- drivers/media/dvb-frontends/cxd2820r_t.c | 4 +-- drivers/media/dvb-frontends/drxk_hard.c | 34 +++++++++++----------- drivers/media/dvb-frontends/m88ds3103.c | 12 ++++---- drivers/media/dvb-frontends/rtl2832.c | 2 +- drivers/media/dvb-frontends/rtl2832_sdr.c | 2 +- drivers/media/dvb-frontends/stv0367.c | 4 +-- drivers/media/dvb-frontends/stv0900_core.c | 7 ++--- drivers/media/dvb-frontends/tda10071.c | 2 +- drivers/media/i2c/lm3560.c | 4 +-- drivers/media/i2c/s5k5baf.c | 2 +- drivers/media/i2c/smiapp/smiapp-core.c | 8 ++--- drivers/media/i2c/soc_camera/ov9740.c | 4 +-- drivers/media/media-devnode.c | 3 +- drivers/media/pci/bt8xx/bttv-driver.c | 5 ++-- drivers/media/pci/bt8xx/dst_ca.c | 4 +-- drivers/media/pci/saa7164/saa7164-api.c | 3 +- drivers/media/pci/zoran/zoran_device.c | 2 +- drivers/media/platform/davinci/vpfe_capture.c | 3 +- drivers/media/platform/exynos4-is/fimc-isp-video.c | 3 +- drivers/media/platform/marvell-ccic/mcam-core.c | 2 +- drivers/media/platform/omap/omap_vout.c | 8 ++--- drivers/media/platform/omap/omap_vout_vrfb.c | 10 +++---- drivers/media/platform/omap3isp/ispccdc.c | 2 +- drivers/media/platform/s5p-tv/hdmi_drv.c | 2 +- drivers/media/platform/s5p-tv/sdo_drv.c | 2 +- drivers/media/platform/s5p-tv/sii9234_drv.c | 2 +- drivers/media/platform/soc_camera/pxa_camera.c | 2 +- drivers/media/platform/soc_camera/rcar_vin.c | 2 +- drivers/media/platform/soc_camera/soc_camera.c | 4 +-- drivers/media/platform/ti-vpe/vpe.c | 4 +-- drivers/media/platform/via-camera.c | 2 +- drivers/media/platform/vivid/vivid-tpg.c | 4 +-- drivers/media/platform/vivid/vivid-vid-out.c | 10 ++----- drivers/media/radio/radio-gemtek.c | 2 +- drivers/media/radio/radio-sf16fmi.c | 4 +-- drivers/media/radio/si470x/radio-si470x-common.c | 4 +-- drivers/media/rc/ene_ir.c | 2 +- drivers/media/rc/fintek-cir.c | 6 ++-- drivers/media/rc/ite-cir.c | 3 +- drivers/media/rc/nuvoton-cir.c | 6 ++-- drivers/media/tuners/e4000.c | 4 +-- drivers/media/tuners/mt2060.c | 3 +- drivers/media/tuners/mxl5005s.c | 3 +- drivers/media/usb/au0828/au0828-dvb.c | 2 +- drivers/media/usb/cx231xx/cx231xx-dvb.c | 4 +-- drivers/media/usb/dvb-usb-v2/lmedm04.c | 2 +- drivers/media/usb/dvb-usb/af9005.c | 2 +- drivers/media/usb/em28xx/em28xx-input.c | 6 ++-- drivers/media/usb/em28xx/em28xx-video.c | 4 +-- drivers/media/usb/msi2500/msi2500.c | 2 +- drivers/media/v4l2-core/tuner-core.c | 2 +- 56 files changed, 117 insertions(+), 147 deletions(-)
Signature · 1 line
1.9.3
PATCH 1/46 dmxdev: don't use before checking file->private_data
As reported by smatch:
drivers/media/dvb-core/dmxdev.c:1091 dvb_demux_poll() warn: variable dereferenced before check 'dmxdevfilter' (see line 1088)
This was introduced by changeset d102cac8097c.
We need to test if dmxdevfilter exists before using it.
drivers/media/dvb-core/dmxdev.c +1 -2
@@ -1085,10 +1085,9 @@ static long dvb_demux_ioctl(struct file *file, unsigned int cmd,static unsigned int dvb_demux_poll (struct file *file,poll_table *wait) {struct dmxdev_filter *dmxdevfilter = file->private_data; -struct dmxdev *dmxdev = dmxdevfilter->dev;unsigned int mask =0 ; -if ((!dmxdevfilter) || (dmxdev->exit)) +if ((!dmxdevfilter) || dmxdevfilter->dev->exit)return POLLERR ;poll_wait (file, &dmxdevfilter->buffer.queue, wait);
Signature · 1 line
1.9.3
PATCH 2/46 marvel-ccic: don't initialize static vars with 0
In reply to Mauro Carvalho Chehaballoc_bufs_at_read is static. No need to initialize with zero, as the Kernel will cleanup the data memory already.
drivers/media/platform/marvell-ccic/mcam-core.c +1 -1
@@ -67,7 +67,7 @@ MODULE_PARM_DESC(dma_buf_size,"parameters require larger buffers, an attempt to reallocate " "will be made.");#else /* MCAM_MODE_VMALLOC */ -static const bool alloc_bufs_at_read =0 ; +static const bool alloc_bufs_at_read;static const int n_dma_bufs =3 ;/* Used by S/G_PARM */ #endif /* MCAM_MODE_VMALLOC */
Signature · 1 line
1.9.3
PATCH 3/46 soc_camera: use kmemdup()
In reply to Mauro Carvalho ChehabInstead of calling kzalloc and then copying, use kmemdup(). That avoids zeroing the data structure before copying.
Found by coccinelle.
drivers/media/platform/soc_camera/soc_camera.c +1 -3
@@ -1347,13 +1347,11 @@ static int soc_camera_i2c_init(struct soc_camera_device *icd,return -ENODEV ; } - ssdd =kzalloc (sizeof (*ssdd),GFP_KERNEL ); + ssdd =kmemdup (&sdesc->subdev_desc,sizeof (*ssdd),GFP_KERNEL );if (!ssdd) { ret = -ENOMEM ; goto ealloc; } - -memcpy (ssdd, &sdesc->subdev_desc,sizeof (*ssdd));/* * In synchronous case we request regulators ourselves in * soc_camera_pdrv_probe(), make sure the subdevice driver doesn't try
Signature · 1 line
1.9.3
Re: [PATCH 03/46] [media] soc_camera: use kmemdup()
Hi Mauro,
Quoted 13 lines · Mauro Carvalho Chehab
Instead of calling kzalloc and then copying, use
kmemdup(). That avoids zeroing the data structure before copying.Found by coccinelle.
Signed-off-by Mauro Carvalho Chehab <[email protected]>drivers/media/platform/soc_camera/soc_camera.c +0
-0@@ -1347,13 +1347,11 @@ static int soc_camera_i2c_init(struct soc_camera_device *icd,return -ENODEV ;
drivers/media/platform/soc_camera/soc_camera.c static int soc_camera_i2c_init(struct soc_camera_device *icd, · line 1356
Quoted 10 lines
drivers/media/platform/soc_camera/soc_camera.c +1
-3} - ssdd =kzalloc (sizeof (*ssdd),GFP_KERNEL ); + ssdd =kmemdup (&sdesc->subdev_desc,sizeof (*ssdd),GFP_KERNEL );if (!ssdd) { ret = -ENOMEM ; goto ealloc; } - -memcpy (ssdd, &sdesc->subdev_desc,sizeof (*ssdd));
Hm, wow... that seems to be a particularly silly one... Even if not memdup, why did I use kZalloc() to immediately overwrite it completely?.. Thanks for catching! This and the other two (so far) patches - would you like me to pull-push them or just use my
for all 3 of them?
Thanks
Guennadi
Quoted 6 lines
drivers/media/platform/soc_camera/soc_camera.c +0
-0/* * In synchronous case we request regulators ourselves in * soc_camera_pdrv_probe(), make sure the subdevice driver doesn't try Signature · 1 line
1.9.3
Re: [PATCH 03/46] [media] soc_camera: use kmemdup()
Em Wed, 3 Sep 2014 22:44:02 +0200 (CEST) Guennadi Liakhovetski <[email protected]> escreveu:
Quoted 19 lines
Hi Mauro,
Quoted 15 lines · Mauro Carvalho Chehab
Instead of calling kzalloc and then copying, use
kmemdup(). That avoids zeroing the data structure before copying.Found by coccinelle.
Signed-off-by Mauro Carvalho Chehab <[email protected]>drivers/media/platform/soc_camera/soc_camera.c +0
-0@@ -1347,13 +1347,11 @@ static int soc_camera_i2c_init(struct soc_camera_device *icd,return -ENODEV ; }
Quoted 11 lines
drivers/media/platform/soc_camera/soc_camera.c static int soc_camera_i2c_init(struct soc_camera_device *icd, · line 1356
Quoted 8 lines
drivers/media/platform/soc_camera/soc_camera.c +1
-3- ssdd =kzalloc (sizeof (*ssdd),GFP_KERNEL ); + ssdd =kmemdup (&sdesc->subdev_desc,sizeof (*ssdd),GFP_KERNEL );if (!ssdd) { ret = -ENOMEM ; goto ealloc; } - -memcpy (ssdd, &sdesc->subdev_desc,sizeof (*ssdd));Hm, wow... that seems to be a particularly silly one... Even if not memdup, why did I use
kZalloc()to immediately overwrite it completely?..
Maybe this pattern happened due to some incremental change.
Quoted 6 lines
Thanks for catching! This and the other two (so far) patches - would you like me to pull-push them or just use my
for all 3 of them?
Just the acked-by is enough.
Thanks!
Mauro
Quoted 10 lines
Thanks
GuennadiQuoted 6 lines
drivers/media/platform/soc_camera/soc_camera.c +0
-0/* * In synchronous case we request regulators ourselves in * soc_camera_pdrv_probe(), make sure the subdevice driver doesn't try Signature · 1 line
1.9.3
PATCH 4/46 vivid-vid-out: use memdup_user()
In reply to Mauro Carvalho ChehabInstead of allocating and coping from __user, do it using one atomic call. That makes the code simpler. Also,
Found by coccinelle.
drivers/media/platform/vivid/vivid-vid-out.c +3 -7
@@ -897,14 +897,10 @@ int vidioc_s_fmt_vid_out_overlay(struct file *file, void *priv,return ret;if (win->bitmap) { - new_bitmap =kzalloc (bitmap_size,GFP_KERNEL ); + new_bitmap =memdup_user (win->bitmap, bitmap_size); -if (new_bitmap ==NULL ) -return -ENOMEM ; -if (copy_from_user (new_bitmap, win->bitmap, bitmap_size)) { -kfree (new_bitmap); -return -EFAULT ; - } +if (IS_ERR (new_bitmap)) +return PTR_ERR (new_bitmap); } dev->overlay_out_top = win->w.top;
Signature · 1 line
1.9.3
Re: [PATCH 04/46] [media] vivid-vid-out: use memdup_user()
Quoted 2 lines · Mauro Carvalho Chehab
Instead of allocating and coping from
__user, do it using one atomic call. That makes the code simpler. Also,
Also what?
Anyway, looks good to me:
Regards,
Hans
Quoted 28 lines
Found by coccinelle.
Signed-off-by Mauro Carvalho Chehab <[email protected]>drivers/media/platform/vivid/vivid-vid-out.c +3
-7@@ -897,14 +897,10 @@ int vidioc_s_fmt_vid_out_overlay(struct file *file, void *priv,return ret;if (win->bitmap) { - new_bitmap =kzalloc (bitmap_size,GFP_KERNEL ); + new_bitmap =memdup_user (win->bitmap, bitmap_size); -if (new_bitmap ==NULL ) -return -ENOMEM ; -if (copy_from_user (new_bitmap, win->bitmap, bitmap_size)) { -kfree (new_bitmap); -return -EFAULT ; - } +if (IS_ERR (new_bitmap)) +return PTR_ERR (new_bitmap); } dev->overlay_out_top = win->w.top;
Re: [PATCH 04/46] [media] vivid-vid-out: use memdup_user()
Em Wed, 03 Sep 2014 22:49:47 +0200
Hans Verkuil <[email protected]> escreveu:
Quoted 5 lines · Mauro Carvalho Chehab
Quoted 2 lines
Instead of allocating and coping from
__user, do it using one atomic call. That makes the code simpler. Also,Also what?
I added a comment about IS_ERR(new_bitmap), and returning the error, but then I realized that the above is good enough, but I forgot the "Also, " at the above line. Thanks for pointing it.
Quoted 4 lines
Anyway, looks good to me:
Acked-by Hans Verkuil <[email protected]>
Thanks!
Mauro
Quoted 34 lines
Regards,
Hans
Quoted 28 lines
Found by coccinelle.
Signed-off-by Mauro Carvalho Chehab <[email protected]>drivers/media/platform/vivid/vivid-vid-out.c +3
-7@@ -897,14 +897,10 @@ int vidioc_s_fmt_vid_out_overlay(struct file *file, void *priv,return ret;if (win->bitmap) { - new_bitmap =kzalloc (bitmap_size,GFP_KERNEL ); + new_bitmap =memdup_user (win->bitmap, bitmap_size); -if (new_bitmap ==NULL ) -return -ENOMEM ; -if (copy_from_user (new_bitmap, win->bitmap, bitmap_size)) { -kfree (new_bitmap); -return -EFAULT ; - } +if (IS_ERR (new_bitmap)) +return PTR_ERR (new_bitmap); } dev->overlay_out_top = win->w.top;
PATCH 5/46 s5k5baf: remove an uneeded semicolon
In reply to Mauro Carvalho ChehabWe don't use semicolons after curly braces in the middle of the code.
drivers/media/i2c/s5k5baf.c +1 -1
@@ -816,7 +816,7 @@ static void s5k5baf_hw_find_min_fiv(struct s5k5baf *state) "error setting frame interval: %d\n", err); state->error = -EINVAL ; } - }; + }v4l2_err (&state->sd,"cannot find correct frame interval\n" ); state->error = -ERANGE ; }
Signature · 1 line
1.9.3
PATCH 6/46 bttv-driver: remove an uneeded semicolon
In reply to Mauro Carvalho ChehabWe don't use semicolons after curly braces in the middle of the code.
drivers/media/pci/bt8xx/bttv-driver.c +1 -1
@@ -3856,7 +3856,7 @@ static irqreturn_t bttv_irq(int irq, void *dev_id)btwrite (btread (BT848_INT_MASK ) & (-1 ^BT848_INT_GPINT ),BT848_INT_MASK ); - }; + }bttv_print_irqbits (stat,astat);
Signature · 1 line
1.9.3
PATCH 7/46 soc_camera: remove uneeded semicolons
In reply to Mauro Carvalho ChehabWe don't use semicolons after curly braces in the middle of the code.
drivers/media/platform/soc_camera/pxa_camera.c +1 -1
@@ -1694,7 +1694,7 @@ static int pxa_camera_pdata_from_dt(struct device *dev,break ;default :break ; - }; + }if (ep.bus.parallel.flags &V4L2_MBUS_MASTER ) pcdev->platform_flags |=PXA_CAMERA_MASTER ;
drivers/media/platform/soc_camera/rcar_vin.c +1 -1
@@ -1502,7 +1502,7 @@ static int rcar_vin_probe(struct platform_device *pdev) }else { priv->ici.nr =of_alias_get_id (pdev->dev.of_node,"vin" ); priv->chip = (enum chip_id )match->data; - }; + }spin_lock_init (&priv->lock);INIT_LIST_HEAD (&priv->capture);
Signature · 1 line
1.9.3
PATCH 8/46 stv0900_core: don't allocate a temporary var
In reply to Mauro Carvalho ChehabThe error return code STV0900_NO_ERROR happens only once, at the end of the functions. So, just return it directly.
This driver should actually be fixed to return standard Linux error codes, instead of its own macros, but this should be done on a separate patchset.
drivers/media/dvb-frontends/stv0900_core.c +2 -5
@@ -1270,7 +1270,6 @@ enum fe_stv0900_error stv0900_st_dvbs2_single(struct stv0900_internal *intp,enum fe_stv0900_demod_mode LDPC_Mode, enum fe_stv0900_demod_num demod) { - enum fe_stv0900_error error = STV0900_NO_ERROR; s32 reg_ind;dprintk ("%s\n" , __func__);
@@ -1337,7 +1336,7 @@ enum fe_stv0900_error stv0900_st_dvbs2_single(struct stv0900_internal *intp,break ; } -return error; +return STV0900_NO_ERROR ; } static enum fe_stv0900_error stv0900_init_internal(struct dvb_frontend *fe,
@@ -1555,8 +1554,6 @@ static int stv0900_status(struct stv0900_internal *intp,static int stv0900_set_mis (struct stv0900_internal *intp,enum fe_stv0900_demod_num demod,int mis) { -enum fe_stv0900_error error =STV0900_NO_ERROR ; -dprintk ("%s\n" , __func__);if (mis <0 || mis >255 ) {
@@ -1569,7 +1566,7 @@ static int stv0900_set_mis(struct stv0900_internal *intp,stv0900_write_reg (intp,ISIBITENA ,0xff ); } -return error; +return STV0900_NO_ERROR ; }
Signature · 1 line
1.9.3
PATCH 9/46 em28xx: use true/false for boolean vars
In reply to Mauro Carvalho ChehabInstead of using 0 or 1 for boolean, use the true/false defines.
drivers/media/usb/em28xx/em28xx-input.c +3 -3
@@ -609,17 +609,17 @@ static int em28xx_register_snapshot_button(struct em28xx *dev)static void em28xx_init_buttons (struct em28xx *dev) {u8 i =0 , j =0 ; -bool addr_new =0 ; +bool addr_new = false; dev->button_polling_interval =EM28XX_BUTTONS_DEBOUNCED_QUERY_INTERVAL ;while (dev->board.buttons[i].role >=0 && dev->board.buttons[i].role <EM28XX_NUM_BUTTON_ROLES ) {struct em28xx_button *button = &dev->board.buttons[i];/* Check if polling address is already on the list */ - addr_new =1 ; + addr_new = true;for (j =0 ; j < dev->num_button_polling_addresses; j++) {if (button->reg_r == dev->button_polling_addresses[j]) { - addr_new =0 ; + addr_new = false;break ; } }
drivers/media/usb/em28xx/em28xx-video.c +2 -2
@@ -721,7 +721,7 @@ static inline void process_frame_data_em25xx(struct em28xx *dev,struct em28xx_buffer *buf = dev->usb_ctl.vid_buf;struct em28xx_dmaqueue *dmaq = &dev->vidq;struct em28xx_v4l2 *v4l2 = dev->v4l2; -bool frame_end =0 ; +bool frame_end = false;/* Check for header */ /* NOTE: at least with bulk transfers, only the first packet
@@ -2308,7 +2308,7 @@ static int em28xx_v4l2_init(struct em28xx *dev) v4l2->v4l2_dev.ctrl_handler = hdl;if (dev->board.is_webcam) - v4l2->progressive =1 ; + v4l2->progressive = true;/* * Default format, used for tvp5150 or saa711x output formats
Signature · 1 line
1.9.3
PATCH 10/46 tuner-core: use true/false for boolean vars
In reply to Mauro Carvalho ChehabInstead of using 0 or 1 for boolean, use the true/false defines.
drivers/media/v4l2-core/tuner-core.c +1 -1
@@ -601,7 +601,7 @@ static int tuner_probe(struct i2c_client *client, t->name ="(tuner unset)" ; t->type =UNSET ; t->audmode =V4L2_TUNER_MODE_STEREO ; - t->standby =1 ; + t->standby = true; t->radio_freq =87.5 *16000 ;/* Initial freq range */ t->tv_freq =400 *16 ;/* Sets freq to VHF High - needed for some PLL's to properly start */
Signature · 1 line
1.9.3
PATCH 11/46 af9013: use true/false for boolean vars
In reply to Mauro Carvalho ChehabInstead of using 0 or 1 for boolean, use the true/false defines.
drivers/media/dvb-frontends/af9013.c +12 -12
@@ -683,7 +683,7 @@ static int af9013_set_frontend(struct dvb_frontend *fe)switch (c->transmission_mode) {case TRANSMISSION_MODE_AUTO : - auto_mode =1 ; + auto_mode = true;break ;case TRANSMISSION_MODE_2K :break ;
@@ -693,12 +693,12 @@ static int af9013_set_frontend(struct dvb_frontend *fe)default :dev_dbg (&state->i2c->dev,"%s: invalid transmission_mode\n" , __func__); - auto_mode =1 ; + auto_mode = true; }switch (c->guard_interval) {case GUARD_INTERVAL_AUTO : - auto_mode =1 ; + auto_mode = true;break ;case GUARD_INTERVAL_1_32 :break ;
@@ -714,12 +714,12 @@ static int af9013_set_frontend(struct dvb_frontend *fe)default :dev_dbg (&state->i2c->dev,"%s: invalid guard_interval\n" , __func__); - auto_mode =1 ; + auto_mode = true; }switch (c->hierarchy) {case HIERARCHY_AUTO : - auto_mode =1 ; + auto_mode = true;break ;case HIERARCHY_NONE :break ;
@@ -734,12 +734,12 @@ static int af9013_set_frontend(struct dvb_frontend *fe)break ;default :dev_dbg (&state->i2c->dev,"%s: invalid hierarchy\n" , __func__); - auto_mode =1 ; + auto_mode = true; }switch (c->modulation) {case QAM_AUTO : - auto_mode =1 ; + auto_mode = true;break ;case QPSK :break ;
@@ -751,7 +751,7 @@ static int af9013_set_frontend(struct dvb_frontend *fe)break ;default :dev_dbg (&state->i2c->dev,"%s: invalid modulation\n" , __func__); - auto_mode =1 ; + auto_mode = true; }/* Use HP. How and which case we can switch to LP? */
@@ -759,7 +759,7 @@ static int af9013_set_frontend(struct dvb_frontend *fe)switch (c->code_rate_HP) {case FEC_AUTO : - auto_mode =1 ; + auto_mode = true;break ;case FEC_1_2 :break ;
@@ -778,12 +778,12 @@ static int af9013_set_frontend(struct dvb_frontend *fe)default :dev_dbg (&state->i2c->dev,"%s: invalid code_rate_HP\n" , __func__); - auto_mode =1 ; + auto_mode = true; }switch (c->code_rate_LP) {case FEC_AUTO : - auto_mode =1 ; + auto_mode = true;break ;case FEC_1_2 :break ;
@@ -804,7 +804,7 @@ static int af9013_set_frontend(struct dvb_frontend *fe)default :dev_dbg (&state->i2c->dev,"%s: invalid code_rate_LP\n" , __func__); - auto_mode =1 ; + auto_mode = true; }switch (c->bandwidth_hz) {
Signature · 1 line
1.9.3
PATCH 12/46 cxd2820r: use true/false for boolean vars
In reply to Mauro Carvalho ChehabInstead of using 0 or 1 for boolean, use the true/false defines.
drivers/media/dvb-frontends/cxd2820r_c.c +2 -2
@@ -65,7 +65,7 @@ int cxd2820r_set_frontend_c(struct dvb_frontend *fe) } priv->delivery_system =SYS_DVBC_ANNEX_A ; - priv->ber_running =0 ;/* tune stops BER counter */ + priv->ber_running = false;/* tune stops BER counter */ /* program IF frequency */ if (fe->ops.tuner_ops.get_if_frequency) {
@@ -168,7 +168,7 @@ int cxd2820r_read_ber_c(struct dvb_frontend *fe, u32 *ber) start_ber =1 ; } }else { - priv->ber_running =1 ; + priv->ber_running = true; start_ber =1 ; }
drivers/media/dvb-frontends/cxd2820r_core.c +2 -2
@@ -564,10 +564,10 @@ static enum dvbfe_search cxd2820r_search(struct dvb_frontend *fe)/* check if we have a valid signal */ if (status &FE_HAS_LOCK ) { - priv->last_tune_failed =0 ; + priv->last_tune_failed = false;return DVBFE_ALGO_SEARCH_SUCCESS ; }else { - priv->last_tune_failed =1 ; + priv->last_tune_failed = true;return DVBFE_ALGO_SEARCH_AGAIN ; }
drivers/media/dvb-frontends/cxd2820r_t.c +2 -2
@@ -89,7 +89,7 @@ int cxd2820r_set_frontend_t(struct dvb_frontend *fe) } priv->delivery_system =SYS_DVBT ; - priv->ber_running =0 ;/* tune stops BER counter */ + priv->ber_running = false;/* tune stops BER counter */ /* program IF frequency */ if (fe->ops.tuner_ops.get_if_frequency) {
@@ -272,7 +272,7 @@ int cxd2820r_read_ber_t(struct dvb_frontend *fe, u32 *ber) start_ber =1 ; } }else { - priv->ber_running =1 ; + priv->ber_running = true; start_ber =1 ; }
Signature · 1 line
1.9.3
PATCH 13/46 m88ds3103: use true/false for boolean vars
In reply to Mauro Carvalho ChehabInstead of using 0 or 1 for boolean, use the true/false defines.
drivers/media/dvb-frontends/m88ds3103.c +6 -6
@@ -1063,16 +1063,16 @@ static int m88ds3103_set_voltage(struct dvb_frontend *fe,switch (fe_sec_voltage) {case SEC_VOLTAGE_18 : - voltage_sel =1 ; - voltage_dis =0 ; + voltage_sel = true; + voltage_dis = false;break ;case SEC_VOLTAGE_13 : - voltage_sel =0 ; - voltage_dis =0 ; + voltage_sel = false; + voltage_dis = false;break ;case SEC_VOLTAGE_OFF : - voltage_sel =0 ; - voltage_dis =1 ; + voltage_sel = false; + voltage_dis = true;break ;default : dev_dbg(&priv->i2c->dev, "%s: invalid fe_sec_voltage\n",
Signature · 1 line
1.9.3
PATCH 14/46 af9013: use true/false for boolean vars
In reply to Mauro Carvalho ChehabInstead of using 0 or 1 for boolean, use the true/false defines.
Also, instead of testing foo == false, just use the simplified notation if(!foo).
drivers/media/dvb-frontends/rtl2832.c +1 -1
@@ -936,7 +936,7 @@ static void rtl2832_i2c_gate_work(struct work_struct *work)if (ret !=1 ) goto err; - priv->i2c_gate_state =0 ; + priv->i2c_gate_state = false;return ; err:
drivers/media/dvb-frontends/rtl2832_sdr.c +1 -1
@@ -1432,7 +1432,7 @@ struct dvb_frontend *rtl2832_sdr_attach(struct dvb_frontend *fe, s->pixelformat = formats[0 ].pixelformat; s->buffersize = formats[0 ].buffersize; s->num_formats =NUM_FORMATS ; -if (rtl2832_sdr_emulated_fmt == false) +if (!rtl2832_sdr_emulated_fmt) s->num_formats -=1 ;mutex_init (&s->v4l2_lock);
Signature · 1 line
1.9.3
PATCH 15/46 tda10071: use true/false for boolean vars
In reply to Mauro Carvalho ChehabInstead of using 0 or 1 for boolean, use the true/false defines.
drivers/media/dvb-frontends/tda10071.c +1 -1
@@ -1037,7 +1037,7 @@ static int tda10071_init(struct dvb_frontend *fe) ret = -EFAULT ; goto error; }else { - priv->warm =1 ; + priv->warm = true; } cmd.args[0 ] =CMD_GET_FW_VERSION ;
Signature · 1 line
1.9.3
PATCH 16/46 smiapp-core: use true/false for boolean vars
In reply to Mauro Carvalho ChehabInstead of using 0 or 1 for boolean, use the true/false defines.
drivers/media/i2c/smiapp/smiapp-core.c +4 -4
@@ -1312,7 +1312,7 @@ static void smiapp_power_off(struct smiapp_sensor *sensor)clk_disable_unprepare (sensor->ext_clk);usleep_range (5000 ,5000 );regulator_disable (sensor->vana); - sensor->streaming =0 ; + sensor->streaming = false; }static int smiapp_set_power (struct v4l2_subdev *subdev,int on)
@@ -1509,13 +1509,13 @@ static int smiapp_set_stream(struct v4l2_subdev *subdev, int enable)return 0 ;if (enable) { - sensor->streaming =1 ; + sensor->streaming = true; rval =smiapp_start_streaming (sensor);if (rval <0 ) - sensor->streaming =0 ; + sensor->streaming = false; }else { rval =smiapp_stop_streaming (sensor); - sensor->streaming =0 ; + sensor->streaming = false; }return rval;
Signature · 1 line
1.9.3
Re: [PATCH 16/46] [media] smiapp-core: use true/false for boolean vars
Quoted 4 lines · Mauro Carvalho Chehab
Instead of using 0 or 1 for boolean, use the true/false defines.
Signed-off-by Mauro Carvalho Chehab <[email protected]>
Thanks!
Would you like me to pick this patch to my tree, or would you like to apply it directly? I'm fine with either.
Signature · 4 lines
Kind regards, Sakari Ailus e-mail: [email protected] XMPP: [email protected]
Re: [PATCH 16/46] [media] smiapp-core: use true/false for boolean vars
Em Thu, 04 Sep 2014 10:03:40 +0300
Sakari Ailus <[email protected]> escreveu:
Quoted 12 lines · Mauro Carvalho Chehab
Quoted 4 lines
Instead of using 0 or 1 for boolean, use the true/false defines.
Signed-off-by Mauro Carvalho Chehab <[email protected]>Thanks!
Acked-by Sakari Ailus <[email protected]>Would you like me to pick this patch to my tree, or would you like to apply it directly? I'm fine with either.
I'll pick it myself.
Regards,
Mauro
PATCH 17/46 ov9740: use true/false for boolean vars
In reply to Mauro Carvalho ChehabInstead of using 0 or 1 for boolean, use the true/false defines.
drivers/media/i2c/soc_camera/ov9740.c +2 -2
@@ -564,13 +564,13 @@ static int ov9740_set_res(struct i2c_client *client, u32 width, u32 height)u32 y_start;u32 x_end;u32 y_end; -bool scaling =0 ; +bool scaling = false;u32 scale_input_x;u32 scale_input_y;int ret;if ((width !=OV9740_MAX_WIDTH ) || (height !=OV9740_MAX_HEIGHT )) - scaling =1 ; + scaling = true;/* * Try to use as much of the sensor area as possible when supporting
Signature · 1 line
1.9.3
PATCH 18/46 omap3isp: use true/false for boolean vars
In reply to Mauro Carvalho ChehabInstead of using 0 or 1 for boolean, use the true/false defines.
drivers/media/platform/omap3isp/ispccdc.c +1 -1
@@ -1806,7 +1806,7 @@ static int ccdc_video_queue(struct isp_video *video, struct isp_buffer *buffer)spin_lock_irqsave (&ccdc->lock, flags);if (ccdc->state ==ISP_PIPELINE_STREAM_CONTINUOUS && !ccdc->running && ccdc->bt656) - restart =1 ; + restart = true;else ccdc->underrun =1 ;spin_unlock_irqrestore (&ccdc->lock, flags);
Signature · 1 line
1.9.3
Re: [PATCH 18/46] [media] omap3isp: use true/false for boolean vars
Hi Mauro,
Thank you for the patch.
Quoted 4 lines · On Wednesday 03 September 2014 17:32:50 Mauro Carvalho Chehab wrote:
Instead of using 0 or 1 for boolean, use the true/false defines.
Signed-off-by Mauro Carvalho Chehab <[email protected]>
Quoted 14 lines
(quoted diff) +0
-0
b/drivers/media/platform/omap3isp/ispccdc.cindexcabf46b4b645..81a9dc053d58100644drivers/media/platform/omap3isp/ispccdc.c +1
-1@@ -1806,7 +1806,7 @@ static int ccdc_video_queue(struct isp_video *video, struct isp_buffer *buffer) spin_lock_irqsave(&ccdc->lock, flags);if (ccdc->state ==ISP_PIPELINE_STREAM_CONTINUOUS && !ccdc->running && ccdc->bt656) - restart =1 ; + restart = true;else ccdc->underrun =1 ;spin_unlock_irqrestore (&ccdc->lock, flags);
Signature · 3 lines
Regards, Laurent Pinchart
PATCH 19/46 ti-vpe: use true/false for boolean vars
In reply to Mauro Carvalho ChehabInstead of using 0 or 1 for boolean, use the true/false defines.
drivers/media/platform/ti-vpe/vpe.c +2 -2
@@ -835,10 +835,10 @@ static int set_srcdst_params(struct vpe_ctx *ctx) VPDMA_STRIDE_ALIGN); mv_buf_size = bytes_per_line * s_q_data->height; - ctx->deinterlacing =1 ; + ctx->deinterlacing = true; src_h <<=1 ; }else { - ctx->deinterlacing =0 ; + ctx->deinterlacing = false; mv_buf_size =0 ; }
Signature · 1 line
1.9.3
PATCH 20/46 vivid-tpg: use true/false for boolean vars
In reply to Mauro Carvalho ChehabInstead of using 0 or 1 for boolean, use the true/false defines.
drivers/media/platform/vivid/vivid-tpg.c +2 -2
@@ -183,7 +183,7 @@ bool tpg_s_fourcc(struct tpg_data *tpg, u32 fourcc)case V4L2_PIX_FMT_XBGR32 :case V4L2_PIX_FMT_ARGB32 :case V4L2_PIX_FMT_ABGR32 : - tpg->is_yuv =0 ; + tpg->is_yuv = false;break ;case V4L2_PIX_FMT_NV16M :case V4L2_PIX_FMT_NV61M :
@@ -193,7 +193,7 @@ bool tpg_s_fourcc(struct tpg_data *tpg, u32 fourcc)case V4L2_PIX_FMT_UYVY :case V4L2_PIX_FMT_YVYU :case V4L2_PIX_FMT_VYUY : - tpg->is_yuv =1 ; + tpg->is_yuv = true;break ;default :return false;
Signature · 1 line
1.9.3
PATCH 21/46 radio: use true/false for boolean vars
In reply to Mauro Carvalho ChehabInstead of using 0 or 1 for boolean, use the true/false defines.
drivers/media/radio/radio-gemtek.c +1 -1
@@ -332,7 +332,7 @@ static int __init gemtek_init(void) static void __exit gemtek_exit(void) { - hardmute =1 ;/* Turn off PLL */ + hardmute = true;/* Turn off PLL */ #ifdef CONFIG_PNP pnp_unregister_driver (&gemtek_driver.pnp_driver);#endif
drivers/media/radio/radio-sf16fmi.c +2 -2
@@ -285,7 +285,7 @@ static int __init fmi_init(void) io =isapnp_fmi_probe ();if (io <0 )continue ; - pnp_attached =1 ; + pnp_attached = true; }if (!request_region (io,2 ,"radio-sf16fmi" )) {if (pnp_attached)
@@ -349,7 +349,7 @@ static int __init fmi_init(void)mutex_init (&fmi->lock);/* mute card and set default frequency */ - fmi->mute =1 ; + fmi->mute = true; fmi->curfreq =RSF16_MINFREQ ;fmi_set_freq (fmi);
drivers/media/radio/si470x/radio-si470x-common.c +2 -2
@@ -208,7 +208,7 @@ static int si470x_set_band(struct si470x_device *radio, int band)static int si470x_set_chan (struct si470x_device *radio,unsigned short chan) {int retval; -bool timed_out =0 ; +bool timed_out = false;/* start tuning */ radio->registers[CHANNEL ] &= ~CHANNEL_CHAN ;
@@ -300,7 +300,7 @@ static int si470x_set_seek(struct si470x_device *radio, {int band, retval;unsigned int freq; -bool timed_out =0 ; +bool timed_out = false;/* set band */ if (seek->rangelow || seek->rangehigh) {
Signature · 1 line
1.9.3
PATCH 22/46 ene_ir: use true/false for boolean vars
In reply to Mauro Carvalho ChehabInstead of using 0 or 1 for boolean, use the true/false defines.
drivers/media/rc/ene_ir.c +1 -1
@@ -979,7 +979,7 @@ static int ene_transmit(struct rc_dev *rdev, unsigned *buf, unsigned n) dev->tx_reg =0 ; dev->tx_done =0 ; dev->tx_sample =0 ; - dev->tx_sample_pulse =0 ; + dev->tx_sample_pulse = false;dbg ("TX: %d samples" , dev->tx_len);
Signature · 1 line
1.9.3
PATCH 23/46 au0828-dvb: use true/false for boolean vars
In reply to Mauro Carvalho ChehabInstead of using 0 or 1 for boolean, use the true/false defines.
drivers/media/usb/au0828/au0828-dvb.c +1 -1
@@ -630,7 +630,7 @@ void au0828_dvb_suspend(struct au0828_dev *dev)stop_urb_transfer (dev);au0828_stop_transport (dev,1 );mutex_unlock (&dvb->lock); - dev->need_urb_start =1 ; + dev->need_urb_start = true; }/* suspend frontend - does tuner and fe to sleep */ rc =dvb_frontend_suspend (dvb->frontend);
Signature · 1 line
1.9.3
PATCH 24/46 lmedm04: use true/false for boolean vars
In reply to Mauro Carvalho ChehabInstead of using 0 or 1 for boolean, use the true/false defines.
drivers/media/usb/dvb-usb-v2/lmedm04.c +1 -1
@@ -1252,7 +1252,7 @@ static int lme2510_get_stream_config(struct dvb_frontend *fe, u8 *ts_type,/* Turn PID filter on the fly by module option */ if (pid_filter ==2 ) { - adap->pid_filtering =1 ; + adap->pid_filtering = true; adap->max_feed_count =15 ; }
Signature · 1 line
1.9.3
PATCH 25/46 af9005: use true/false for boolean vars
In reply to Mauro Carvalho ChehabInstead of using 0 or 1 for boolean, use the true/false defines.
drivers/media/usb/dvb-usb/af9005.c +1 -1
@@ -30,7 +30,7 @@ MODULE_PARM_DESC(debug,"set debugging level (1=info,xfer=2,rc=4,reg=8,i2c=16,fw=32 (or-able))." DVB_USB_DEBUG_STATUS);/* enable obnoxious led */ -bool dvb_usb_af9005_led =1 ; +bool dvb_usb_af9005_led = true;module_param_named (led, dvb_usb_af9005_led, bool,0644 );MODULE_PARM_DESC (led,"enable led (default: 1)." );
Signature · 1 line
1.9.3
PATCH 26/46 msi2500: simplify boolean tests
In reply to Mauro Carvalho ChehabInstead of using if (foo == false), just use
if (!foo).
That allows a faster mental parsing when analyzing the code.
drivers/media/usb/msi2500/msi2500.c +1 -1
@@ -1212,7 +1212,7 @@ static int msi2500_probe(struct usb_interface *intf, s->pixelformat = formats[0 ].pixelformat; s->buffersize = formats[0 ].buffersize; s->num_formats =NUM_FORMATS ; -if (msi2500_emulated_fmt == false) +if (!msi2500_emulated_fmt) s->num_formats -=2 ;/* Init videobuf2 queue structure */
Signature · 1 line
1.9.3
PATCH 27/46 drxk_hard: simplify test logic
In reply to Mauro Carvalho Chehabinstead of testing if it is false or true, just use if (!foo) or if (foo). That makes the code easier to read and shorter.
Also, properly initialize booleans with true or false.
drivers/media/dvb-frontends/drxk_hard.c +17 -17
@@ -1028,7 +1028,7 @@ static int hi_command(struct drxk_state *state, u16 cmd, u16 *p_result) ((state->m_hi_cfg_ctrl) &SIO_HI_RA_RAM_PAR_5_CFG_SLEEP__M ) == SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ); -if (powerdown_cmd == false) { +if (!powerdown_cmd) {/* Wait until command rdy */ u32 retry_count =0 ;u16 wait_cmd;
@@ -1129,7 +1129,7 @@ static int mpegts_configure_pins(struct drxk_state *state, bool mpeg_enable)if (status <0 ) goto error; -if (mpeg_enable == false) { +if (!mpeg_enable) {/* Set MPEG TS pads to inputmode */ status =write16 (state,SIO_PDR_MSTRT_CFG__A ,0x0000 );if (status <0 )
@@ -1190,7 +1190,7 @@ static int mpegts_configure_pins(struct drxk_state *state, bool mpeg_enable)if (status <0 ) goto error; -if (state->m_enable_parallel == true) { +if (state->m_enable_parallel) {/* parallel -> enable MD1 to MD7 */ status =write16 (state,SIO_PDR_MD1_CFG__A , sio_pdr_mdx_cfg);
@@ -1392,7 +1392,7 @@ static int dvbt_enable_ofdm_token_ring(struct drxk_state *state, bool enable)dprintk (1 ,"\n" ); -if (enable == false) { +if (!enable) { desired_ctrl =SIO_OFDM_SH_OFDM_RING_ENABLE_OFF ; desired_status =SIO_OFDM_SH_OFDM_RING_STATUS_DOWN ; }
@@ -2012,7 +2012,7 @@ static int mpegts_dto_setup(struct drxk_state *state, goto error; fec_oc_reg_mode &= (~FEC_OC_MODE_PARITY__M ); fec_oc_reg_ipr_mode &= (~FEC_OC_IPR_MODE_MVAL_DIS_PAR__M ); -if (state->m_insert_rs_byte == true) { +if (state->m_insert_rs_byte) {/* enable parity symbol forward */ fec_oc_reg_mode |=FEC_OC_MODE_PARITY__M ;/* MVAL disable during parity bytes */
@@ -2023,7 +2023,7 @@ static int mpegts_dto_setup(struct drxk_state *state,/* Check serial or parallel output */ fec_oc_reg_ipr_mode &= (~(FEC_OC_IPR_MODE_SERIAL__M )); -if (state->m_enable_parallel == false) { +if (!state->m_enable_parallel) {/* MPEG data output is serial -> set ipr_mode[0] */ fec_oc_reg_ipr_mode |=FEC_OC_IPR_MODE_SERIAL__M ; }
@@ -2136,19 +2136,19 @@ static int mpegts_configure_polarity(struct drxk_state *state)/* Control selective inversion of output bits */ fec_oc_reg_ipr_invert &= (~(invert_data_mask)); -if (state->m_invert_data == true) +if (state->m_invert_data) fec_oc_reg_ipr_invert |= invert_data_mask; fec_oc_reg_ipr_invert &= (~(FEC_OC_IPR_INVERT_MERR__M )); -if (state->m_invert_err == true) +if (state->m_invert_err) fec_oc_reg_ipr_invert |=FEC_OC_IPR_INVERT_MERR__M ; fec_oc_reg_ipr_invert &= (~(FEC_OC_IPR_INVERT_MSTRT__M )); -if (state->m_invert_str == true) +if (state->m_invert_str) fec_oc_reg_ipr_invert |=FEC_OC_IPR_INVERT_MSTRT__M ; fec_oc_reg_ipr_invert &= (~(FEC_OC_IPR_INVERT_MVAL__M )); -if (state->m_invert_val == true) +if (state->m_invert_val) fec_oc_reg_ipr_invert |=FEC_OC_IPR_INVERT_MVAL__M ; fec_oc_reg_ipr_invert &= (~(FEC_OC_IPR_INVERT_MCLK__M )); -if (state->m_invert_clk == true) +if (state->m_invert_clk) fec_oc_reg_ipr_invert |=FEC_OC_IPR_INVERT_MCLK__M ;return write16 (state,FEC_OC_IPR_INVERT__A , fec_oc_reg_ipr_invert);
@@ -3352,7 +3352,7 @@ static int dvbt_ctrl_set_inc_enable(struct drxk_state *state, bool *enabled)int status;dprintk (1 ,"\n" ); -if (*enabled == true) +if (*enabled) status =write16 (state,IQM_CF_BYPASSDET__A ,0 );else status =write16 (state,IQM_CF_BYPASSDET__A ,1 );
@@ -3368,7 +3368,7 @@ static int dvbt_ctrl_set_fr_enable(struct drxk_state *state, bool *enabled)int status;dprintk (1 ,"\n" ); -if (*enabled == true) { +if (*enabled) {/* write mask to 1 */ status =write16 (state,OFDM_SC_RA_RAM_FR_THRES_8K__A ,DEFAULT_FR_THRES_8K );
@@ -6794,11 +6794,11 @@ struct dvb_frontend *drxk_attach(const struct drxk_config *config, state->enable_merr_cfg = config->enable_merr_cfg;if (config->dynamic_clk) { - state->m_dvbt_static_clk =0 ; - state->m_dvbc_static_clk =0 ; + state->m_dvbt_static_clk = false; + state->m_dvbc_static_clk = false; }else { - state->m_dvbt_static_clk =1 ; - state->m_dvbc_static_clk =1 ; + state->m_dvbt_static_clk = true; + state->m_dvbc_static_clk = true; }
Signature · 1 line
1.9.3
PATCH 28/46 lm3560: simplify boolean tests
In reply to Mauro Carvalho ChehabInstead of using if (on == true), just use
if (on).
That allows a faster mental parsing when analyzing the code.
drivers/media/i2c/lm3560.c +2 -2
@@ -100,14 +100,14 @@ static int lm3560_enable_ctrl(struct lm3560_flash *flash,int rval;if (led_no ==LM3560_LED0 ) { -if (on == true) +if (on) rval =regmap_update_bits (flash->regmap,REG_ENABLE ,0x08 ,0x08 );else rval =regmap_update_bits (flash->regmap,REG_ENABLE ,0x08 ,0x00 ); }else { -if (on == true) +if (on) rval =regmap_update_bits (flash->regmap,REG_ENABLE ,0x10 ,0x10 );else
Signature · 1 line
1.9.3
Re: [PATCH 28/46] [media] lm3560: simplify boolean tests
Quoted 7 lines · Mauro Carvalho Chehab
Instead of using if (on == true), just use
if (on).That allows a faster mental parsing when analyzing the code.
Signed-off-by Mauro Carvalho Chehab <[email protected]>
Signature · 2 lines
Sakari Ailus e-mail: [email protected] XMPP: [email protected]
Daniel Jeong
Acked-byRe: [PATCH 28/46] [media] lm3560: simplify boolean tests
Hi.
Quoted 10 lines · Mauro Carvalho Chehab
Quoted 7 lines
Instead of using if (on == true), just use
if (on).That allows a faster mental parsing when analyzing the code.
Signed-off-by Mauro Carvalho Chehab <[email protected]>Acked-by Sakari Ailus <[email protected]>
I will keep it in my mind for my next patch files.
Thank you.
PATCH 29/46 lm3560: simplify a boolean test
In reply to Mauro Carvalho Chehablml33dpatch is boolean. So, the possible values are true or false.
Instead of using if (lml33dpath), just use
if (!lml33dpath).
That allows a faster mental parsing when analyzing the code.
drivers/media/pci/zoran/zoran_device.c +1 -1
@@ -682,7 +682,7 @@ set_videobus_dir (struct zoran *zr,switch (zr->card.type) {case LML33 :case LML33R10 : -if (lml33dpath ==0 ) +if (!lml33dpath)GPIO (zr,5 , val);else GPIO (zr,5 ,1 );
Signature · 1 line
1.9.3
PATCH 30/46 omap: simplify test logic
In reply to Mauro Carvalho Chehabinstead of testing bools if they are false or true, just use if (!foo) or if (foo). That makes the code easier to read and shorter.
Also, properly initialize booleans with true or false.
drivers/media/platform/omap/omap_vout.c +4 -4
@@ -989,7 +989,7 @@ static int omap_vout_release(struct file *file) mask =DISPC_IRQ_VSYNC |DISPC_IRQ_EVSYNC_EVEN |DISPC_IRQ_EVSYNC_ODD |DISPC_IRQ_VSYNC2 ;omap_dispc_unregister_isr (omap_vout_isr, vout, mask); - vout->streaming =0 ; + vout->streaming = false;videobuf_streamoff (q);videobuf_queue_cancel (q);
@@ -1644,7 +1644,7 @@ static int vidioc_streamon(struct file *file, void *fh, enum v4l2_buf_type i) vout->field_id =0 ;/* set flag here. Next QBUF will start DMA */ - vout->streaming =1 ; + vout->streaming = true; vout->first_int =1 ;
@@ -1704,7 +1704,7 @@ static int vidioc_streamoff(struct file *file, void *fh, enum v4l2_buf_type i)if (!vout->streaming)return -EINVAL ; - vout->streaming =0 ; + vout->streaming = false; mask =DISPC_IRQ_VSYNC |DISPC_IRQ_EVSYNC_EVEN |DISPC_IRQ_EVSYNC_ODD |DISPC_IRQ_VSYNC2 ;
@@ -1912,7 +1912,7 @@ static int __init omap_vout_setup_video_data(struct omap_vout_device *vout) control[0 ].id =V4L2_CID_ROTATE ; control[0 ].value =0 ; vout->rotation =0 ; - vout->mirror =0 ; + vout->mirror = false; vout->control[2 ].id =V4L2_CID_HFLIP ; vout->control[2 ].value =0 ;if (vout->vid_info.rotation_type ==VOUT_ROT_VRFB )
drivers/media/platform/omap/omap_vout_vrfb.c +5 -5
@@ -148,7 +148,7 @@ int omap_vout_setup_vrfb_bufs(struct platform_device *pdev, int vid_num, ret = -ENOMEM ; goto release_vrfb_ctx; } - vout->vrfb_static_allocation =1 ; + vout->vrfb_static_allocation = true; }return 0 ;
@@ -336,7 +336,7 @@ void omap_vout_calculate_vrfb_offset(struct omap_vout_device *vout) offset = vout->vrfb_context[0 ].yoffset * vout->vrfb_context[0 ].bytespp; temp_ps = ps / vr_ps; -if (mirroring ==0 ) { +if (!mirroring) { *cropped_offset = offset + line_length * temp_ps * cleft + crop->top * temp_ps; }else {
@@ -350,7 +350,7 @@ void omap_vout_calculate_vrfb_offset(struct omap_vout_device *vout) vout->vrfb_context[0].bytespp) + (vout->vrfb_context[0 ].xoffset * vout->vrfb_context[0].bytespp)); -if (mirroring ==0 ) { +if (!mirroring) { *cropped_offset = offset + (line_length * ps * ctop) + (cleft / vr_ps) * ps;
@@ -364,7 +364,7 @@ void omap_vout_calculate_vrfb_offset(struct omap_vout_device *vout) offset =MAX_PIXELS_PER_LINE * vout->vrfb_context[0 ].xoffset * vout->vrfb_context[0 ].bytespp; temp_ps = ps / vr_ps; -if (mirroring ==0 ) { +if (!mirroring) { *cropped_offset = offset + line_length * temp_ps * crop->left + ctop * ps; }else {
@@ -375,7 +375,7 @@ void omap_vout_calculate_vrfb_offset(struct omap_vout_device *vout) }break ;case dss_rotation_0_degree: -if (mirroring ==0 ) { +if (!mirroring) { *cropped_offset = (line_length * ps) * crop->top + (crop->left / vr_ps) * ps; }else {
Signature · 1 line
1.9.3
PATCH 31/46 via-camera: simplify boolean tests
In reply to Mauro Carvalho ChehabInstead of using if (foo == false), just use
if (!foo).
That allows a faster mental parsing when analyzing the code.
drivers/media/platform/via-camera.c +1 -1
@@ -1276,7 +1276,7 @@ static bool viacam_serial_is_enabled(void) VIACAM_SERIAL_CREG, &cbyte);if ((cbyte &VIACAM_SERIAL_BIT ) ==0 )return false;/* Not enabled */ -if (override_serial ==0 ) { +if (!override_serial) {printk (KERN_NOTICE "Via camera: serial port is enabled, " \"refusing to load.\n" ); printk(KERN_NOTICE "Specify override_serial=1 to force " \
Signature · 1 line
1.9.3
PATCH 32/46 e4000: simplify boolean tests
In reply to Mauro Carvalho ChehabInstead of using if (foo == false), just use
if (!foo).
That allows a faster mental parsing when analyzing the code.
drivers/media/tuners/e4000.c +2 -2
@@ -400,7 +400,7 @@ static int e4000_g_volatile_ctrl(struct v4l2_ctrl *ctrl) struct e4000 *s = container_of(ctrl->handler, struct e4000, hdl);int ret; -if (s->active == false) +if (!s->active)return 0 ;switch (ctrl->id) {
@@ -423,7 +423,7 @@ static int e4000_s_ctrl(struct v4l2_ctrl *ctrl)struct dtv_frontend_properties *c = &fe->dtv_property_cache;int ret; -if (s->active == false) +if (!s->active)return 0 ;switch (ctrl->id) {
Signature · 1 line
1.9.3
Re: [PATCH 32/46] [media] e4000: simplify boolean tests
Which is static analyzer you are referring to fix these?
Using true/false for boolean datatype sounds OK, but personally I dislike use of negation operator. For my eyes (foo = 0) / (foo == false) is better and I have changed all the time negate operators to equal operators from my drivers.
regards
Antti
Quoted 31 lines · Mauro Carvalho Chehab
Instead of using if (foo == false), just use
if (!foo).That allows a faster mental parsing when analyzing the code.
Signed-off-by Mauro Carvalho Chehab <[email protected]>drivers/media/tuners/e4000.c +2
-2@@ -400,7 +400,7 @@ static int e4000_g_volatile_ctrl(struct v4l2_ctrl *ctrl) struct e4000 *s = container_of(ctrl->handler, struct e4000, hdl);int ret; -if (s->active == false) +if (!s->active)return 0 ;switch (ctrl->id) {@@ -423,7 +423,7 @@ static int e4000_s_ctrl(struct v4l2_ctrl *ctrl)struct dtv_frontend_properties *c = &fe->dtv_property_cache;int ret; -if (s->active == false) +if (!s->active)return 0 ;switch (ctrl->id) {
Signature · 1 line
http://palosaari.fi/
Re: [PATCH 32/46] [media] e4000: simplify boolean tests
Em Thu, 04 Sep 2014 02:56:19 +0300
Antti Palosaari <[email protected]> escreveu:
Quoted 1 line
Which is static analyzer you are referring to fix these?
Coccinelle. See: scripts/coccinelle/misc/boolinit.cocci
Quoted 4 lines
Using true/false for boolean datatype sounds OK, but personally I dislike use of negation operator. For my eyes (foo = 0) / (foo == false) is better and I have changed all the time negate operators to equal operators from my drivers.
The usage of the negation operator on such tests is there since the beginning of C.
By being shorter, a reviewer can read it faster and, at least for me, it is a non-brain to understand !foo. On the other hand, "false" is not part of standard C. So, it takes more time for my brain to parse it.
Anyway, from my side, the real reasone for using it is not due to that. It is that I (and other Kernel developers) run from time to time static analyzers like smatch and coccinelle, in order to identify real errors. Having a less-polluted log helps to identify the newer errors/warnings.
Regards,
Mauro
Quoted 37 lines
regards
AnttiQuoted 31 lines · Mauro Carvalho Chehab
Instead of using if (foo == false), just use
if (!foo).That allows a faster mental parsing when analyzing the code.
Signed-off-by Mauro Carvalho Chehab <[email protected]>drivers/media/tuners/e4000.c +2
-2@@ -400,7 +400,7 @@ static int e4000_g_volatile_ctrl(struct v4l2_ctrl *ctrl) struct e4000 *s = container_of(ctrl->handler, struct e4000, hdl);int ret; -if (s->active == false) +if (!s->active)return 0 ;switch (ctrl->id) {@@ -423,7 +423,7 @@ static int e4000_s_ctrl(struct v4l2_ctrl *ctrl)struct dtv_frontend_properties *c = &fe->dtv_property_cache;int ret; -if (s->active == false) +if (!s->active)return 0 ;switch (ctrl->id) {
Re: [PATCH 32/46] [media] e4000: simplify boolean tests
Quoted 7 lines · Mauro Carvalho Chehab
Em Thu, 04 Sep 2014 02:56:19 +0300
Antti Palosaari <[email protected]> escreveu:Quoted 1 line
Which is static analyzer you are referring to fix these?
Coccinelle. See:
scripts/coccinelle/misc/boolinit.cocci
Quoted 7 lines
Quoted 4 lines
Using true/false for boolean datatype sounds OK, but personally I dislike use of negation operator. For my eyes (foo = 0) / (foo == false) is better and I have changed all the time negate operators to equal operators from my drivers.
The usage of the negation operator on such tests is there since the beginning of C.
ugh! :(
Quoted 5 lines
By being shorter, a reviewer can read it faster and, at least for me, it is a non-brain to understand !foo. On the other hand, "false" is not part of standard C. So, it takes more time for my brain to parse it.
No, it just opposite for me and many others.
Quoted 6 lines
Anyway, from my side, the real reasone for using it is not due to that. It is that I (and other Kernel developers) run from time to time static analyzers like smatch and coccinelle, in order to identify real errors. Having a less-polluted log helps to identify the newer errors/warnings.
Have you ever looked Documentation/CodingStyle ?
How about that example, from CodingStyle:
int fun(int a)
{
int result = 0;
char *buffer = kmalloc(SIZE);
if (buffer == NULL)
return -ENOMEM;
if (condition1) {
while (loop1) {
...
}
result = 1;
goto out;
}
...
out:
kfree(buffer);
return result;
}As it shows, it is (buffer == NULL) *not* (!buffer). And if you like to do it differently then update CodingStyle first! Add clear mention that it should be (!buffer) and change given example to match your style. Otherwise, I am happy to do as CodingStyle shows!
Antti
Quoted 40 lines
Regards,
MauroQuoted 37 lines
regards
AnttiQuoted 31 lines · Mauro Carvalho Chehab
Instead of using if (foo == false), just use
if (!foo).That allows a faster mental parsing when analyzing the code.
Signed-off-by Mauro Carvalho Chehab <[email protected]>drivers/media/tuners/e4000.c +2
-2@@ -400,7 +400,7 @@ static int e4000_g_volatile_ctrl(struct v4l2_ctrl *ctrl) struct e4000 *s = container_of(ctrl->handler, struct e4000, hdl);int ret; -if (s->active == false) +if (!s->active)return 0 ;switch (ctrl->id) {@@ -423,7 +423,7 @@ static int e4000_s_ctrl(struct v4l2_ctrl *ctrl)struct dtv_frontend_properties *c = &fe->dtv_property_cache;int ret; -if (s->active == false) +if (!s->active)return 0 ;switch (ctrl->id) {
Signature · 1 line
http://palosaari.fi/
Mauro Carvalho Chehab
Reviewed-by Rusty RussellRe: [PATCH 32/46] [media] e4000: simplify boolean tests
Em Thu, 04 Sep 2014 04:27:57 +0300
Antti Palosaari <[email protected]> escreveu:
Quoted 6 lines
Quoted 4 lines
By being shorter, a reviewer can read it faster and, at least for me, it is a non-brain to understand !foo. On the other hand, "false" is not part of standard C. So, it takes more time for my brain to parse it.
No, it just opposite for me and many others.
Yeah, this is subjective, so different people have different views.
Yet, if you take a look on the numbers inside the Kernel, this is what we have:
$ git grep "== false" |wc -l 622 $ git grep "false ==" |wc -l 41 $ git grep 'if (!' |wc -l 153125
Being 249 occurrences inside Documentation:
$ git grep 'if (!' |grep Docum|wc -l 249
$ git grep "false ==" |grep Docum |wc -l 0 $ git grep "== false" |grep Docum |wc -l 1
Where the only Documentation with == false is this one (at Documentation/thermal/sysfs-api.txt):
.no_hwmon: a boolean to indicate if the thermal to hwmon sysfs interface
is required. when no_hwmon == false, a hwmon sysfs interface will be created. when no_hwmon == true, nothing will be done. In case the thermal_zone_params is NULL, the hwmon interface will be created (for backward compatibility).
Yet, at the only place where this is tested, the syntax is !foo:
drivers/thermal/thermal_core.c: if (!tz->tzp || !tz->tzp->no_hwmon) {
So, clearly, the vast majority of Kernel developers are using !foo.
Quoted 9 lines
Quoted 5 lines
Anyway, from my side, the real reasone for using it is not due to that. It is that I (and other Kernel developers) run from time to time static analyzers like smatch and coccinelle, in order to identify real errors. Having a less-polluted log helps to identify the newer errors/warnings.
Have you ever looked
Documentation/CodingStyle?
How about that example, from CodingStyle:
int fun(int a)
Quoted 6 lines
{
int result = 0;
char *buffer = kmalloc(SIZE);
if (buffer == NULL)
return -ENOMEM;Well, buffer is not a boolean operator.
I would code myself with if (!buffer), but I accept patches with both ways, and I've seen a mix of both usages inside the Kernel.
Quoted 14 lines
if (condition1) {
while (loop1) {
...
}
result = 1;
goto out;
}
...
out:
kfree(buffer);
return result;
}Quoted 4 lines
As it shows, it is (buffer == NULL) *not* (!buffer). And if you like to do it differently then update CodingStyle first! Add clear mention that it should be (!buffer) and change given example to match your style. Otherwise, I am happy to do as CodingStyle shows!
It is not me opting for it. Someone's else added the coccinelle patch upstream, and it got at least 2 different reviewers besides its author:
commit 8991058171f3536c0a8fbb50ad311689b8b74979
Author: Julia Lawall <[email protected]> Date: Fri Feb 10 22:05:18 2012 +0100
coccinelle: semantic patch for bool issues
Anyway, as I said, my main interest is to just shut up the in-Kernel tests, as this helps to better identify real problems.
I don't care if this is done by someone sending a patch to remove or modify the coccinelle script to accept both ways or to use the approach taken by this patch.
Quoted 44 lines
Antti
Quoted 40 lines
Regards,
MauroQuoted 37 lines
regards
AnttiQuoted 31 lines · Mauro Carvalho Chehab
Instead of using if (foo == false), just use
if (!foo).That allows a faster mental parsing when analyzing the code.
Signed-off-by Mauro Carvalho Chehab <[email protected]>drivers/media/tuners/e4000.c +2
-2@@ -400,7 +400,7 @@ static int e4000_g_volatile_ctrl(struct v4l2_ctrl *ctrl) struct e4000 *s = container_of(ctrl->handler, struct e4000, hdl);int ret; -if (s->active == false) +if (!s->active)return 0 ;switch (ctrl->id) {@@ -423,7 +423,7 @@ static int e4000_s_ctrl(struct v4l2_ctrl *ctrl)struct dtv_frontend_properties *c = &fe->dtv_property_cache;int ret; -if (s->active == false) +if (!s->active)return 0 ;switch (ctrl->id) {
PATCH 33/46 s5p-tv: Simplify the return logic
In reply to Mauro Carvalho ChehabMake sure pm_runtime_* calls does not use unnecessary IS_ERR_VALUE().
Reported by scripts/coccinelle/api/pm_runtime.cocci script.
drivers/media/platform/s5p-tv/hdmi_drv.c +1 -1
@@ -615,7 +615,7 @@ static int hdmi_s_power(struct v4l2_subdev *sd, int on)else ret =pm_runtime_put_sync (hdev->dev);/* only values < 0 indicate errors */ -return IS_ERR_VALUE (ret) ? ret :0 ; +return ret <0 ? ret :0 ; } static int hdmi_s_dv_timings(struct v4l2_subdev *sd,
drivers/media/platform/s5p-tv/sdo_drv.c +1 -1
@@ -190,7 +190,7 @@ static int sdo_s_power(struct v4l2_subdev *sd, int on) ret =pm_runtime_put_sync (dev);/* only values < 0 indicate errors */ -return IS_ERR_VALUE (ret) ? ret :0 ; +return ret <0 ? ret :0 ; }static int sdo_streamon (struct sdo_device *sdev)
drivers/media/platform/s5p-tv/sii9234_drv.c +1 -1
@@ -289,7 +289,7 @@ static int sii9234_s_power(struct v4l2_subdev *sd, int on)else ret =pm_runtime_put (&ctx->client->dev);/* only values < 0 indicate errors */ -return IS_ERR_VALUE (ret) ? ret :0 ; +return ret <0 ? ret :0 ; }static int sii9234_s_stream (struct v4l2_subdev *sd,int enable)
Signature · 1 line
1.9.3
PATCH 34/46 siano: just return 0 instead of using a var
In reply to Mauro Carvalho ChehabInstead of allocating a var to store 0 and just return it, change the code to return 0 directly.
drivers/media/common/siano/smscoreapi.c +1 -3
@@ -2129,8 +2129,6 @@ int smscore_gpio_get_level(struct smscore_device_t *coredev, u8 pin_num,static int __init smscore_module_init (void ) { -int rc =0 ; -INIT_LIST_HEAD (&g_smscore_notifyees);INIT_LIST_HEAD (&g_smscore_devices);kmutex_init (&g_smscore_deviceslock);
@@ -2138,7 +2136,7 @@ static int __init smscore_module_init(void)INIT_LIST_HEAD (&g_smscore_registry);kmutex_init (&g_smscore_registrylock); -return rc; +return 0 ; } static void __exit smscore_module_exit(void)
Signature · 1 line
1.9.3
PATCH 35/46 stv0367: just return 0 instead of using a var
In reply to Mauro Carvalho ChehabInstead of allocating a var to store 0 and just return it, change the code to return 0 directly.
drivers/media/dvb-frontends/stv0367.c +1 -3
@@ -1935,8 +1935,6 @@ static int stv0367ter_get_frontend(struct dvb_frontend *fe)struct dtv_frontend_properties *p = &fe->dtv_property_cache;struct stv0367_state *state = fe->demodulator_priv;struct stv0367ter_state *ter_state = state->ter_state; - -int error =0 ;enum stv0367_ter_mode mode;int constell =0 ,/* snr = 0,*/ Data =0 ;
@@ -2020,7 +2018,7 @@ static int stv0367ter_get_frontend(struct dvb_frontend *fe) p->guard_interval =stv0367_readbits (state,F367TER_SYR_GUARD ); -return error; +return 0 ; }static int stv0367ter_read_snr (struct dvb_frontend *fe,u16 *snr)
Signature · 1 line
1.9.3
PATCH 36/46 media-devnode: just return 0 instead of using a var
In reply to Mauro Carvalho ChehabInstead of allocating a var to store 0 and just return it, change the code to return 0 directly.
drivers/media/media-devnode.c +1 -2
@@ -192,7 +192,6 @@ static int media_open(struct inode *inode, struct file *filp)static int media_release (struct inode *inode,struct file *filp) {struct media_devnode *mdev =media_devnode_data (filp); -int ret =0 ;if (mdev->fops->release) mdev->fops->release (filp);
@@ -201,7 +200,7 @@ static int media_release(struct inode *inode, struct file *filp)return value is ignored. */ put_device (&mdev->dev); filp->private_data =NULL ; -return ret; +return 0 ; }static const struct file_operations media_devnode_fops = {
Signature · 1 line
1.9.3
PATCH 37/46 bt8xx: just return 0 instead of using a var
In reply to Mauro Carvalho ChehabInstead of allocating a var to store 0 and just return it, change the code to return 0 directly.
drivers/media/pci/bt8xx/bttv-driver.c +1 -2
@@ -1531,7 +1531,6 @@ bttv_switch_overlay(struct bttv *btv, struct bttv_fh *fh, {struct bttv_buffer *old;unsigned long flags; -int retval =0 ;dprintk ("switch_overlay: enter [new=%p]\n" , new);if (new)
@@ -1551,7 +1550,7 @@ bttv_switch_overlay(struct bttv *btv, struct bttv_fh *fh,if (NULL == new)free_btres_lock (btv,fh,RESOURCE_OVERLAY );dprintk ("switch_overlay: done\n" ); -return retval; +return 0 ; }/* ----------------------------------------------------------------------- */
drivers/media/pci/bt8xx/dst_ca.c +1 -3
@@ -674,11 +674,9 @@ static int dst_ca_release(struct inode *inode, struct file *file)static ssize_t dst_ca_read (struct file *file,char __user *buffer,size_t length,loff_t *offset) { -ssize_t bytes_read =0 ; -dprintk (verbose,DST_CA_DEBUG ,1 ," Device read." ); -return bytes_read; +return 0 ; }static ssize_t dst_ca_write (struct file *file,const char __user *buffer,size_t length,loff_t *offset)
Signature · 1 line
1.9.3
PATCH 38/46 saa7164: just return 0 instead of using a var
In reply to Mauro Carvalho ChehabInstead of allocating a var to store 0 and just return it, change the code to return 0 directly.
drivers/media/pci/saa7164/saa7164-api.c +1 -2
@@ -680,7 +680,6 @@ static int saa7164_api_set_dif(struct saa7164_port *port, u8 reg, u8 val)int saa7164_api_configure_dif (struct saa7164_port *port,u32 std) {struct saa7164_dev *dev = port->dev; -int ret =0 ;u8 agc_disable;dprintk (DBGLVL_API ,"%s(nr=%d, 0x%x)\n" , __func__, port->nr, std);
@@ -733,7 +732,7 @@ int saa7164_api_configure_dif(struct saa7164_port *port, u32 std)saa7164_api_set_dif (port,0x04 ,0x00 );/* Active (again) */ msleep (100 ); -return ret; +return 0 ; }/* Ensure the dif is in the correct state for the operating mode
Signature · 1 line
1.9.3
PATCH 39/46 davinci: just return 0 instead of using a var
In reply to Mauro Carvalho ChehabInstead of allocating a var to store 0 and just return it, change the code to return 0 directly.
drivers/media/platform/davinci/vpfe_capture.c +1 -2
@@ -943,12 +943,11 @@ static int vpfe_g_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *fmt) {struct vpfe_device *vpfe_dev =video_drvdata (file); -int ret =0 ;v4l2_dbg (1 , debug, &vpfe_dev->v4l2_dev,"vpfe_g_fmt_vid_cap\n" );/* Fill in the information about format */ *fmt = vpfe_dev->fmt; -return ret; +return 0 ; } static int vpfe_enum_fmt_vid_cap(struct file *file, void *priv,
Signature · 1 line
1.9.3
Re: [PATCH 39/46] [media] davinci: just return 0 instead of using a var
Quoted 3 lines · Mauro Carvalho Chehab
Instead of allocating a var to store 0 and just return it, change the code to return 0 directly.
Regards,
--Prabhakar Lad
Quoted 23 lines
Signed-off-by Mauro Carvalho Chehab <[email protected]>drivers/media/platform/davinci/vpfe_capture.c +1
-3@@ -943,12 +943,11 @@ static int vpfe_g_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *fmt) {struct vpfe_device *vpfe_dev =video_drvdata (file); -int ret =0 ;v4l2_dbg (1 , debug, &vpfe_dev->v4l2_dev,"vpfe_g_fmt_vid_cap\n" );/* Fill in the information about format */ *fmt = vpfe_dev->fmt; -return ret; +return 0 ; } static int vpfe_enum_fmt_vid_cap(struct file *file, void *priv, --1.9.3
PATCH 40/46 marvel-ccic: just return 0 instead of using a var
In reply to Mauro Carvalho ChehabInstead of allocating a var to store 0 and just return it, change the code to return 0 directly.
drivers/media/platform/exynos4-is/fimc-isp-video.c +1 -2
@@ -313,7 +313,6 @@ static int isp_video_release(struct file *file)struct fimc_is_video *ivc = &isp->video_capture;struct media_entity *entity = &ivc->ve.vdev.entity;struct media_device *mdev = entity->parent; -int ret =0 ;mutex_lock (&isp->video_lock);
@@ -335,7 +334,7 @@ static int isp_video_release(struct file *file)pm_runtime_put (&isp->pdev->dev);mutex_unlock (&isp->video_lock); -return ret; +return 0 ; }static const struct v4l2_file_operations isp_video_fops = {
Signature · 1 line
1.9.3
PATCH 41/46 fintek-cir: just return 0 instead of using a var
In reply to Mauro Carvalho ChehabInstead of allocating a var to store 0 and just return it, change the code to return 0 directly.
drivers/media/rc/fintek-cir.c +2 -4
@@ -148,7 +148,6 @@ static int fintek_hw_detect(struct fintek_dev *fintek)u8 vendor_major, vendor_minor;u8 portsel, ir_class;u16 vendor, chip; -int ret =0 ;fintek_config_mode_enable (fintek);
@@ -208,7 +207,7 @@ static int fintek_hw_detect(struct fintek_dev *fintek)spin_unlock_irqrestore (&fintek->fintek_lock, flags); -return ret; +return 0 ; }static void fintek_cir_ldev_init (struct fintek_dev *fintek)
@@ -644,7 +643,6 @@ static int fintek_suspend(struct pnp_dev *pdev, pm_message_t state)static int fintek_resume (struct pnp_dev *pdev) { -int ret =0 ;struct fintek_dev *fintek =pnp_get_drvdata (pdev);fit_dbg ("%s called" , __func__);
@@ -661,7 +659,7 @@ static int fintek_resume(struct pnp_dev *pdev)fintek_cir_regs_init (fintek); -return ret; +return 0 ; }static void fintek_shutdown (struct pnp_dev *pdev)
Signature · 1 line
1.9.3
PATCH 42/46 ite-cir: just return 0 instead of using a var
In reply to Mauro Carvalho ChehabInstead of allocating a var to store 0 and just return it, change the code to return 0 directly.
drivers/media/rc/ite-cir.c +1 -2
@@ -1666,7 +1666,6 @@ static int ite_suspend(struct pnp_dev *pdev, pm_message_t state)static int ite_resume (struct pnp_dev *pdev) { -int ret =0 ;struct ite_dev *dev =pnp_get_drvdata (pdev);unsigned long flags;
@@ -1681,7 +1680,7 @@ static int ite_resume(struct pnp_dev *pdev)spin_unlock_irqrestore (&dev->lock, flags); -return ret; +return 0 ; }static void ite_shutdown (struct pnp_dev *pdev)
Signature · 1 line
1.9.3
PATCH 43/46 nuvoton-cir: just return 0 instead of using a var
In reply to Mauro Carvalho ChehabInstead of allocating a var to store 0 and just return it, change the code to return 0 directly.
drivers/media/rc/nuvoton-cir.c +2 -4
@@ -229,7 +229,6 @@ static int nvt_hw_detect(struct nvt_dev *nvt) {unsigned long flags;u8 chip_major, chip_minor; -int ret =0 ;char chip_id[12 ];bool chip_unknown = false;
@@ -285,7 +284,7 @@ static int nvt_hw_detect(struct nvt_dev *nvt) nvt->chip_minor = chip_minor;spin_unlock_irqrestore (&nvt->nvt_lock, flags); -return ret; +return 0 ; }static void nvt_cir_ldev_init (struct nvt_dev *nvt)
@@ -1177,7 +1176,6 @@ static int nvt_suspend(struct pnp_dev *pdev, pm_message_t state)static int nvt_resume (struct pnp_dev *pdev) { -int ret =0 ;struct nvt_dev *nvt =pnp_get_drvdata (pdev);nvt_dbg ("%s called" , __func__);
@@ -1195,7 +1193,7 @@ static int nvt_resume(struct pnp_dev *pdev)nvt_cir_regs_init (nvt);nvt_cir_wake_regs_init (nvt); -return ret; +return 0 ; }static void nvt_shutdown (struct pnp_dev *pdev)
Signature · 1 line
1.9.3
PATCH 44/46 mt2060: just return 0 instead of using a var
In reply to Mauro Carvalho ChehabInstead of allocating a var to store 0 and just return it, change the code to return 0 directly.
drivers/media/tuners/mt2060.c +1 -2
@@ -157,7 +157,6 @@ static int mt2060_set_params(struct dvb_frontend *fe) {struct dtv_frontend_properties *c = &fe->dtv_property_cache;struct mt2060_priv *priv; -int ret=0 ;int i=0 ;u32 freq;u8 lnaband;
@@ -240,7 +239,7 @@ static int mt2060_set_params(struct dvb_frontend *fe)if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl (fe,0 );/* close i2c_gate */ -return ret; +return 0 ; }static void mt2060_calibrate (struct mt2060_priv *priv)
Signature · 1 line
1.9.3
PATCH 45/46 mxl5005s: just return 0 instead of using a var
In reply to Mauro Carvalho ChehabInstead of allocating a var to store 0 and just return it, change the code to return 0 directly.
drivers/media/tuners/mxl5005s.c +1 -2
@@ -1692,7 +1692,6 @@ static u16 MXL5005_TunerConfig(struct dvb_frontend *fe, ) {struct mxl5005s_state *state = fe->tuner_priv; -u16 status =0 ; state->Mode = Mode; state->IF_Mode = IF_mode;
@@ -1715,7 +1714,7 @@ static u16 MXL5005_TunerConfig(struct dvb_frontend *fe,/* Synthesizer LO frequency calculation */ MXL_SynthIFLO_Calc (fe); -return status; +return 0 ; }static void MXL_SynthIFLO_Calc (struct dvb_frontend *fe)
Signature · 1 line
1.9.3
PATCH 46/46 cx231xx: just return 0 instead of using a var
In reply to Mauro Carvalho ChehabInstead of allocating a var to store 0 and just return it, change the code to return 0 directly.
drivers/media/usb/cx231xx/cx231xx-dvb.c +1 -3
@@ -403,8 +403,6 @@ static int attach_xc5000(u8 addr, struct cx231xx *dev)int cx231xx_set_analog_freq (struct cx231xx *dev,u32 freq) { -int status =0 ; -if ((dev->dvb !=NULL ) && (dev->dvb->frontend !=NULL )) {struct dvb_tuner_ops *dops = &dev->dvb->frontend->ops.tuner_ops;
@@ -423,7 +421,7 @@ int cx231xx_set_analog_freq(struct cx231xx *dev, u32 freq) } -return status; +return 0 ; }int cx231xx_reset_analog_tuner (struct cx231xx *dev)
Signature · 1 line
1.9.3