Q35/AHCI -cdrom/-hda desugaring
v2 cover Q35/AHCI -cdrom/-hda desugaring
This is an extremely rough/quick sketch of a -cdrom/-hda desugaring fix for Q35/AHCI.
Before I spent any time on it, I wanted feedback from Markus or anyone else who had concerns about how this problem would get fixed.
This is, then, rough approach #2.
Highlights:
(1) Add a board property (instead of a HBA property, sigh) that defines how we should map (index, (bus,unit)).
(2) Modify drive_new to accept the MachineClass instead of the default interface type. This does not affect how default drives get added, because any over-rides to the "default type" get handled in options, so while it appears we have removed the type of default drives, we have not.
(3) Create helpers for AHCI to assist the Q35 board in populating the AHCI device with the IDE drives.
(4) Create a helper to whine at us for oversights and help bug reporters give us more meaningful information.
John Snow (3):
blockdev: Add function to search for orphaned drives Add units-per-idebus property
ahci: implement -cdrom and -hd[a-d]
blockdev.c | 29 +++++++++++++++++++++++++++-- device-hotplug.c | 2 +- hw/i386/pc_q35.c | 6 +++++- hw/ide/ahci.c | 31 +++++++++++++++++++++++++++++++ hw/ide/ahci.h | 3 +++ include/hw/boards.h | 3 ++- include/sysemu/blockdev.h | 3 ++- vl.c | 24 ++++++++++++++++-------- 8 files changed, 87 insertions(+), 14 deletions(-)
Signature · 1 line
1.9.3
RFC v2 1/3 blockdev: Add function to search for orphaned drives
--- blockdev.c | 19 +++++++++++++++++++ include/sysemu/blockdev.h | 1 + vl.c | 5 +++++ 3 files changed, 25 insertions(+)
blockdev.c +19 -0
@@ -166,6 +166,25 @@ DriveInfo *drive_get(BlockInterfaceType type, int bus, int unit)return NULL ; } +DriveInfo *drive_check_orphaned (void ) +{ +DriveInfo *dinfo; +DriveInfo *ret =NULL ; + + QTAILQ_FOREACH(dinfo, &drives, next) { +/* If dev is NULL, it has no device attached. +* If drv is non-NULL, it has a file attached. +* If both conditions are true, it is possibly an oversight. */ +if ((dinfo->bdrv->dev ==NULL ) && (dinfo->bdrv->drv !=NULL )) { +fprintf (stderr,"Orphaned drive: id=%s,if=%s,file=%s\n" , + dinfo->id, if_name[dinfo->type], dinfo->bdrv->filename); + ret = dinfo; + } + } + +return ret; +} +DriveInfo *drive_get_by_index (BlockInterfaceType type,int index) { return drive_get(type,
include/sysemu/blockdev.h +1 -0
@@ -46,6 +46,7 @@ struct DriveInfo { };DriveInfo *drive_get (BlockInterfaceType type,int bus,int unit); +DriveInfo *drive_check_orphaned (void );DriveInfo *drive_get_by_index (BlockInterfaceType type,int index);int drive_get_max_bus (BlockInterfaceType type);DriveInfo *drive_get_next (BlockInterfaceType type);
vl.c +5 -0
@@ -4457,6 +4457,11 @@ int main(int argc, char **argv, char **envp)if (qemu_opts_foreach (qemu_find_opts ("device" ), device_init_func,NULL ,1 ) !=0 )exit (1 ); +/* anybody left over? */ +if (drive_check_orphaned ()) { +fprintf (stderr,"Warning: found drives without a backing device.\n" ); + } +net_check_clients (); ds =init_displaystate ();
Signature · 1 line
1.9.3
Re: [Qemu-devel] [RFC v2 1/3] blockdev: Add function to search for orphaned drives
Quoted 14 lines · John Snow
Signed-off-by John Snow <[email protected]>--- blockdev.c | 19 +++++++++++++++++++ include/sysemu/blockdev.h | 1 + vl.c | 5 +++++ 3 files changed, 25 insertions(+)blockdev.c +0
-0@@ -166,6 +166,25 @@ DriveInfo *drive_get(BlockInterfaceType type, int bus, int unit)return NULL ; }
blockdev.c DriveInfo *drive_get(BlockInterfaceType type, int bus, int unit) · line 177
Quoted 10 lines
blockdev.c +9
-0+DriveInfo *drive_check_orphaned (void ) +{ +DriveInfo *dinfo; +DriveInfo *ret =NULL ; + + QTAILQ_FOREACH(dinfo, &drives, next) { +/* If dev is NULL, it has no device attached. +* If drv is non-NULL, it has a file attached. +* If both conditions are true, it is possibly an oversight. */
Suggest to spell out dinfo->bdrv->dev and dinfo->bdrv->drv.
"File attached" is imprecise. BDS member drv is non-null betwen bdrv_open() and bdrv_close(). A BDS with null drv means "empty", in the sense of "no medium".
blockdev.c DriveInfo *drive_get(BlockInterfaceType type, int bus, int unit) · line 183
Quoted 6 lines
blockdev.c +6
-0+if ((dinfo->bdrv->dev ==NULL ) && (dinfo->bdrv->drv !=NULL )) { +fprintf (stderr,"Orphaned drive: id=%s,if=%s,file=%s\n" , + dinfo->id, if_name[dinfo->type], dinfo->bdrv->filename); + ret = dinfo; + } + }
Please prefix "Warning:" to make the nature of this message more explicit.
"Orphaned drive" might not be obvious to all users, but it's concise, and no worse than the "has no peer" we use for NICs.
You warn when a non-empty drive is not used by a device model.
This warns when you create one with -drive if=none for future use in the monitor. I guess that's fine.
It doesn't warn for empty drives. I doubt "empty" should make a difference.
I think the condition to check is "has the board failed to pick up a drive that is meant to be picked up by the board":
dinfo->type != IF_NONE && !dinfo->bdrv->dev
I guess this can warn about default drives, because we blindly add them whether the boards wants them or not. Stupidest solution that could possibly work: add a flag to DriveInfo to suppress the warning for them.
Better solution: don't add them unless the board wants them. I tried that before, but my solution[*] went nowhere. If you're interested in trying again, let me know, and I'll explain.
Quoted 25 lines
blockdev.c +4
-0+ +return ret; +} +DriveInfo *drive_get_by_index (BlockInterfaceType type,int index) { return drive_get(type,include/sysemu/blockdev.h +1
-0@@ -46,6 +46,7 @@ struct DriveInfo { };DriveInfo *drive_get (BlockInterfaceType type,int bus,int unit); +DriveInfo *drive_check_orphaned (void );DriveInfo *drive_get_by_index (BlockInterfaceType type,int index);int drive_get_max_bus (BlockInterfaceType type);DriveInfo *drive_get_next (BlockInterfaceType type);vl.c +0
-0@@ -4457,6 +4457,11 @@ int main(int argc, char **argv, char **envp)if (qemu_opts_foreach (qemu_find_opts ("device" ), device_init_func,NULL ,1 ) !=0 )
vl.c int main(int argc, char **argv, char **envp) · line 4467
Quoted 10 lines
vl.c +5
-0exit (1 ); +/* anybody left over? */ +if (drive_check_orphaned ()) { +fprintf (stderr,"Warning: found drives without a backing device.\n" ); + } +net_check_clients (); ds =init_displaystate ();
[*] https://lists.nongnu.org/archive/html/qemu-devel/2012-08/msg02993.html
Re: [Qemu-devel] [RFC v2 1/3] blockdev: Add function to search for orphaned drives
Quoted 47 lines · Markus Armbruster
Quoted 14 lines · John Snow
Signed-off-by John Snow <[email protected]>--- blockdev.c | 19 +++++++++++++++++++ include/sysemu/blockdev.h | 1 + vl.c | 5 +++++ 3 files changed, 25 insertions(+)blockdev.c +0
-0@@ -166,6 +166,25 @@ DriveInfo *drive_get(BlockInterfaceType type, int bus, int unit)return NULL ; }blockdev.c DriveInfo *drive_get(BlockInterfaceType type, int bus, int unit) · line 177
Quoted 10 lines
blockdev.c +9
-0+DriveInfo *drive_check_orphaned (void ) +{ +DriveInfo *dinfo; +DriveInfo *ret =NULL ; + + QTAILQ_FOREACH(dinfo, &drives, next) { +/* If dev is NULL, it has no device attached. +* If drv is non-NULL, it has a file attached. +* If both conditions are true, it is possibly an oversight. */ Suggest to spell out
dinfo->bdrv->devanddinfo->bdrv->drv."File attached" is imprecise. BDS member drv is non-null betwen
bdrv_open()andbdrv_close(). A BDS with null drv means "empty", in the sense of "no medium".blockdev.c DriveInfo *drive_get(BlockInterfaceType type, int bus, int unit) · line 183
Quoted 6 lines
blockdev.c +6
-0+if ((dinfo->bdrv->dev ==NULL ) && (dinfo->bdrv->drv !=NULL )) { +fprintf (stderr,"Orphaned drive: id=%s,if=%s,file=%s\n" , + dinfo->id, if_name[dinfo->type], dinfo->bdrv->filename); + ret = dinfo; + } + }Please prefix "Warning:" to make the nature of this message more explicit.
"Orphaned drive" might not be obvious to all users, but it's concise, and no worse than the "has no peer" we use for NICs.
Quoted 7 lines
You warn when a non-empty drive is not used by a device model.
This warns when you create one with -drive if=none for future use in the monitor. I guess that's fine.
It doesn't warn for empty drives. I doubt "empty" should make a difference.
I didn't want it to warn about things like the SD drive and the floppy drive, created by default, but you're right. Your suggestion below fixes this problem.
Quoted 8 lines
I think the condition to check is "has the board failed to pick up a drive that is meant to be picked up by the board":
dinfo->type != IF_NONE && !dinfo->bdrv->devI guess this can warn about default drives, because we blindly add them whether the boards wants them or not. Stupidest solution that could possibly work: add a flag to DriveInfo to suppress the warning for them.
Hm. Actually, the default drives are added by their specific interfaces. IF_IDE, IF_FLOPPY and IF_SD. This is a good improvement. (Well, cdrom is actually added via block_default_type which is usually unset, and happens to coincide with IF_IDE.)
Quoted 43 lines
Better solution: don't add them unless the board wants them. I tried that before, but my solution[*] went nowhere. If you're interested in trying again, let me know, and I'll explain.
Quoted 25 lines
blockdev.c +4
-0+ +return ret; +} +DriveInfo *drive_get_by_index (BlockInterfaceType type,int index) { return drive_get(type,include/sysemu/blockdev.h +1
-0@@ -46,6 +46,7 @@ struct DriveInfo { };DriveInfo *drive_get (BlockInterfaceType type,int bus,int unit); +DriveInfo *drive_check_orphaned (void );DriveInfo *drive_get_by_index (BlockInterfaceType type,int index);int drive_get_max_bus (BlockInterfaceType type);DriveInfo *drive_get_next (BlockInterfaceType type);vl.c +0
-0@@ -4457,6 +4457,11 @@ int main(int argc, char **argv, char **envp)if (qemu_opts_foreach (qemu_find_opts ("device" ), device_init_func,NULL ,1 ) !=0 )vl.c int main(int argc, char **argv, char **envp) · line 4467
Quoted 10 lines
vl.c +5
-0exit (1 ); +/* anybody left over? */ +if (drive_check_orphaned ()) { +fprintf (stderr,"Warning: found drives without a backing device.\n" ); + } +net_check_clients (); ds =init_displaystate ();[*] https://lists.nongnu.org/archive/html/qemu-devel/2012-08/msg02993.html
RFC v2 2/3 Add units-per-idebus property
In reply to John Snow--- blockdev.c | 10 ++++++++-- device-hotplug.c | 2 +- hw/i386/pc_q35.c | 3 ++- include/hw/boards.h | 3 ++- include/sysemu/blockdev.h | 2 +- vl.c | 19 +++++++++++-------- 6 files changed, 25 insertions(+), 14 deletions(-)
blockdev.c +8 -2
@@ -45,6 +45,7 @@#include "qmp-commands.h" #include "trace.h" #include "sysemu/arch_init.h" +#include "hw/boards.h" static QTAILQ_HEAD(drivelist, DriveInfo) drives = QTAILQ_HEAD_INITIALIZER(drives);
@@ -643,7 +644,7 @@ QemuOptsList qemu_legacy_drive_opts = { }, }; -DriveInfo *drive_new (QemuOpts *all_opts,BlockInterfaceType block_default_type) +DriveInfo *drive_new (QemuOpts *all_opts,MachineClass *mc) {const char *value;DriveInfo *dinfo =NULL ;
@@ -651,6 +652,7 @@ DriveInfo *drive_new(QemuOpts *all_opts, BlockInterfaceType block_default_type)QemuOpts *legacy_opts;DriveMediaType media =MEDIA_DISK ;BlockInterfaceType type; +BlockInterfaceType block_default_type = mc->block_default_type;int cyls, heads, secs, translation;int max_devs, bus_id, unit_id, index;const char *devaddr;
@@ -828,7 +830,11 @@ DriveInfo *drive_new(QemuOpts *all_opts, BlockInterfaceType block_default_type) unit_id =qemu_opt_get_number (legacy_opts,"unit" ,-1 ); index =qemu_opt_get_number (legacy_opts,"index" ,-1 ); - max_devs = if_max_devs[type]; +if (type ==IF_IDE && mc->units_per_idebus) { + max_devs = mc->units_per_idebus; + }else { + max_devs = if_max_devs[type]; + }if (index !=-1 ) {if (bus_id !=0 || unit_id !=-1 ) {
device-hotplug.c +1 -1
@@ -40,7 +40,7 @@ DriveInfo *add_init_drive(const char *optstr)return NULL ; mc =MACHINE_GET_CLASS (current_machine); - dinfo =drive_new (opts, mc->block_default_type); + dinfo =drive_new (opts, mc);if (!dinfo) {qemu_opts_del (opts);return NULL ;
hw/i386/pc_q35.c +2 -1
@@ -348,7 +348,8 @@ static void pc_q35_init_1_4(MachineState *machine)#define PC_Q35_2_2_MACHINE_OPTIONS \ PC_Q35_MACHINE_OPTIONS, \ - .default_machine_opts = "firmware=bios-256k.bin" + .default_machine_opts = "firmware=bios-256k.bin", \ + .units_per_idebus = 1static QEMUMachine pc_q35_machine_v2_2 = {PC_Q35_2_2_MACHINE_OPTIONS ,
include/hw/boards.h +2 -1
@@ -37,6 +37,7 @@ struct QEMUMachine { no_cdrom:1 , no_sdcard:1;int is_default; +unsigned short units_per_idebus;const char *default_machine_opts;const char *default_boot_order;GlobalProperty *compat_props;
@@ -95,11 +96,11 @@ struct MachineClass { no_cdrom:1 , no_sdcard:1;int is_default; +unsigned short units_per_idebus;const char *default_machine_opts;const char *default_boot_order;GlobalProperty *compat_props;const char *hw_version; - HotplugHandler *(*get_hotplug_handler)(MachineState *machine, DeviceState *dev); };
include/sysemu/blockdev.h +1 -1
@@ -55,7 +55,7 @@ DriveInfo *drive_get_by_blockdev(BlockDriverState *bs);QemuOpts *drive_def (const char *optstr);QemuOpts *drive_add (BlockInterfaceType type,int index,const char *file,const char *optstr); -DriveInfo *drive_new (QemuOpts *arg,BlockInterfaceType block_default_type); +DriveInfo *drive_new (QemuOpts *arg,MachineClass *mc);void drive_del (DriveInfo *dinfo);/* device-hotplug */
vl.c +11 -8
@@ -1151,9 +1151,9 @@ static int cleanup_add_fd(QemuOpts *opts, void *opaque)static int drive_init_func (QemuOpts *opts,void *opaque) { -BlockInterfaceType *block_default_type = opaque; +MachineClass *mc = opaque; -return drive_new (opts, *block_default_type) ==NULL ; +return drive_new (opts, mc) ==NULL ; }static int drive_enable_snapshot (QemuOpts *opts,void *opaque)
@@ -1165,7 +1165,7 @@ static int drive_enable_snapshot(QemuOpts *opts, void *opaque) }static void default_drive (int enable,int snapshot,BlockInterfaceType type, -int index,const char *optstr) +int index,const char *optstr,MachineClass *mc) {QemuOpts *opts;
@@ -1177,7 +1177,8 @@ static void default_drive(int enable, int snapshot, BlockInterfaceType type,if (snapshot) {drive_enable_snapshot (opts,NULL ); } -if (!drive_new (opts, type)) { + +if (!drive_new (opts, mc)) {exit (1 ); } }
@@ -1583,6 +1584,7 @@ static void machine_class_init(ObjectClass *oc, void *data) mc->hot_add_cpu = qm->hot_add_cpu; mc->kvm_type = qm->kvm_type; mc->block_default_type = qm->block_default_type; + mc->units_per_idebus = qm->units_per_idebus; mc->max_cpus = qm->max_cpus; mc->no_serial = qm->no_serial; mc->no_parallel = qm->no_parallel;
@@ -4376,14 +4378,15 @@ int main(int argc, char **argv, char **envp)if (snapshot)qemu_opts_foreach (qemu_find_opts ("drive" ), drive_enable_snapshot,NULL ,0 );if (qemu_opts_foreach (qemu_find_opts ("drive" ), drive_init_func, - &machine_class->block_default_type,1 ) !=0 ) { + machine_class,1 ) !=0 ) {exit (1 ); }default_drive (default_cdrom, snapshot, machine_class->block_default_type,2 , -CDROM_OPTS ); -default_drive (default_floppy, snapshot,IF_FLOPPY ,0 ,FD_OPTS ); -default_drive (default_sdcard, snapshot,IF_SD ,0 ,SD_OPTS ); +CDROM_OPTS , machine_class); +default_drive (default_floppy, snapshot,IF_FLOPPY ,0 ,FD_OPTS , + machine_class); +default_drive (default_sdcard, snapshot,IF_SD ,0 ,SD_OPTS , machine_class);if (qemu_opts_foreach (qemu_find_opts ("numa" ), numa_init_func,NULL ,1 ) !=0 ) {
Signature · 1 line
1.9.3
Re: [Qemu-devel] [RFC v2 2/3] Add units-per-idebus property
Quoted 40 lines · John Snow
Signed-off-by John Snow <[email protected]>--- blockdev.c | 10 ++++++++-- device-hotplug.c | 2 +- hw/i386/pc_q35.c | 3 ++- include/hw/boards.h | 3 ++- include/sysemu/blockdev.h | 2 +- vl.c | 19 +++++++++++-------- 6 files changed, 25 insertions(+), 14 deletions(-)blockdev.c +3
-1@@ -45,6 +45,7 @@#include "qmp-commands.h" #include "trace.h" #include "sysemu/arch_init.h" +#include "hw/boards.h" static QTAILQ_HEAD(drivelist, DriveInfo) drives = QTAILQ_HEAD_INITIALIZER(drives);@@ -643,7 +644,7 @@ QemuOptsList qemu_legacy_drive_opts = { }, }; -DriveInfo *drive_new (QemuOpts *all_opts,BlockInterfaceType block_default_type) +DriveInfo *drive_new (QemuOpts *all_opts,MachineClass *mc) {const char *value;DriveInfo *dinfo =NULL ;@@ -651,6 +652,7 @@ DriveInfo *drive_new(QemuOpts *all_opts, BlockInterfaceType block_default_type)QemuOpts *legacy_opts;DriveMediaType media =MEDIA_DISK ;BlockInterfaceType type; +BlockInterfaceType block_default_type = mc->block_default_type;int cyls, heads, secs, translation;int max_devs, bus_id, unit_id, index;const char *devaddr;
blockdev.c DriveInfo *drive_new(QemuOpts *all_opts, BlockInterfaceType block_default_type) · line 837
Quoted 9 lines
blockdev.c +5
-1@@ -828,7 +830,11 @@ DriveInfo *drive_new(QemuOpts *all_opts, BlockInterfaceType block_default_type) unit_id =qemu_opt_get_number (legacy_opts,"unit" ,-1 ); index =qemu_opt_get_number (legacy_opts,"index" ,-1 ); - max_devs = if_max_devs[type]; +if (type ==IF_IDE && mc->units_per_idebus) { + max_devs = mc->units_per_idebus; + }else { + max_devs = if_max_devs[type]; + }
This overrides if_max_devs[IF_IDE] in one out of three places.
if_max_devs[type] governs the mapping between index and (bus, unit).
If it's zero, then (bus, unit) = (0, index).
Else, (bus, unit) = (index / max_devs, index % max_devs).
Overriding it just here affects these things:
* Picking a default when the user specifies neither index nor unit
* Range checking unit
* Default ID, but let's ignore that for now
It does *not* affect drive_index_to_bus_id(), drive_index_to_unit_id(), i.e. the actual mapping between index and (bus, unit)! index=1 is still mapped to (bus, unit) = (0, 1). No good.
Testing (needs an incremental fix, see below) confirms:
qemu: -drive if=ide,media=cdrom,index=1: unit 1 too big (max is 0)
You have to override if_max_devs[] consistently.
You provide for overriding if_max_devs[IF_IDE] only. It'll do for now.
Quoted 21 lines
blockdev.c +0
-0if (index !=-1 ) {if (bus_id !=0 || unit_id !=-1 ) {device-hotplug.c +1
-1@@ -40,7 +40,7 @@ DriveInfo *add_init_drive(const char *optstr)return NULL ; mc =MACHINE_GET_CLASS (current_machine); - dinfo =drive_new (opts, mc->block_default_type); + dinfo =drive_new (opts, mc);if (!dinfo) {qemu_opts_del (opts);return NULL ;hw/i386/pc_q35.c +0
-0
hw/i386/pc_q35.c static void pc_q35_init_1_4(MachineState *machine) · line 353
Quoted 7 lines
hw/i386/pc_q35.c +2
-1@@ -348,7 +348,8 @@ static void pc_q35_init_1_4(MachineState *machine)#define PC_Q35_2_2_MACHINE_OPTIONS \ PC_Q35_MACHINE_OPTIONS, \ - .default_machine_opts = "firmware=bios-256k.bin" + .default_machine_opts = "firmware=bios-256k.bin", \ + .units_per_idebus = 1
I figrue this keeps -drive if=ide for older Q35 machines compatibly broken. If that's what we want to do...
Quoted 7 lines
hw/i386/pc_q35.c +0
-0static QEMUMachine pc_q35_machine_v2_2 = {PC_Q35_2_2_MACHINE_OPTIONS ,include/hw/boards.h +0
-0
include/hw/boards.h struct QEMUMachine { · line 43
Quoted 7 lines
include/hw/boards.h +1
-0@@ -37,6 +37,7 @@ struct QEMUMachine { no_cdrom:1 , no_sdcard:1;int is_default; +unsigned short units_per_idebus;const char *default_machine_opts;const char *default_boot_order;GlobalProperty *compat_props;
if_max_devs[] and the max_devs variables are all int. I'd rather not mix signed and unsigned without need
include/hw/boards.h struct MachineClass { · line 106
Quoted 13 lines
include/hw/boards.h +1
-1@@ -95,11 +96,11 @@ struct MachineClass { no_cdrom:1 , no_sdcard:1;int is_default; +unsigned short units_per_idebus;const char *default_machine_opts;const char *default_boot_order;GlobalProperty *compat_props;const char *hw_version; - HotplugHandler *(*get_hotplug_handler)(MachineState *machine, DeviceState *dev); };
Let's keep the blank line separating the instance variables from the method.
Quoted 49 lines
include/sysemu/blockdev.h +1
-1@@ -55,7 +55,7 @@ DriveInfo *drive_get_by_blockdev(BlockDriverState *bs);QemuOpts *drive_def (const char *optstr);QemuOpts *drive_add (BlockInterfaceType type,int index,const char *file,const char *optstr); -DriveInfo *drive_new (QemuOpts *arg,BlockInterfaceType block_default_type); +DriveInfo *drive_new (QemuOpts *arg,MachineClass *mc);void drive_del (DriveInfo *dinfo);/* device-hotplug */ vl.c +5
-4@@ -1151,9 +1151,9 @@ static int cleanup_add_fd(QemuOpts *opts, void *opaque)static int drive_init_func (QemuOpts *opts,void *opaque) { -BlockInterfaceType *block_default_type = opaque; +MachineClass *mc = opaque; -return drive_new (opts, *block_default_type) ==NULL ; +return drive_new (opts, mc) ==NULL ; }static int drive_enable_snapshot (QemuOpts *opts,void *opaque)@@ -1165,7 +1165,7 @@ static int drive_enable_snapshot(QemuOpts *opts, void *opaque) }static void default_drive (int enable,int snapshot,BlockInterfaceType type, -int index,const char *optstr) +int index,const char *optstr,MachineClass *mc) {QemuOpts *opts;@@ -1177,7 +1177,8 @@ static void default_drive(int enable, int snapshot, BlockInterfaceType type,if (snapshot) {drive_enable_snapshot (opts,NULL ); } -if (!drive_new (opts, type)) { + +if (!drive_new (opts, mc)) {exit (1 ); } }
vl.c static void machine_class_init(ObjectClass *oc, void *data) · line 1590
Quoted 7 lines
vl.c +1
-0@@ -1583,6 +1584,7 @@ static void machine_class_init(ObjectClass *oc, void *data) mc->hot_add_cpu = qm->hot_add_cpu; mc->kvm_type = qm->kvm_type; mc->block_default_type = qm->block_default_type; + mc->units_per_idebus = qm->units_per_idebus; mc->max_cpus = qm->max_cpus; mc->no_serial = qm->no_serial; mc->no_parallel = qm->no_parallel;
Not sufficient! You missed the duplicated code in pc_generic_machine_class_init(). That something was missing was quite obvious in my testing, although what was missing was not. This is the fix I mentioned above.
Marcel, you touched both copies recently. Do you know why we need two of them? And why do we copy from QEMUMachine to MachineClass member by member? Why can't we just point from MachineClass to QEMUMachine? Or at least embed the struct so we can copy it wholesale?
Quoted 20 lines
vl.c +5
-4@@ -4376,14 +4378,15 @@ int main(int argc, char **argv, char **envp)if (snapshot)qemu_opts_foreach (qemu_find_opts ("drive" ), drive_enable_snapshot,NULL ,0 );if (qemu_opts_foreach (qemu_find_opts ("drive" ), drive_init_func, - &machine_class->block_default_type,1 ) !=0 ) { + machine_class,1 ) !=0 ) {exit (1 ); }default_drive (default_cdrom, snapshot, machine_class->block_default_type,2 , -CDROM_OPTS ); -default_drive (default_floppy, snapshot,IF_FLOPPY ,0 ,FD_OPTS ); -default_drive (default_sdcard, snapshot,IF_SD ,0 ,SD_OPTS ); +CDROM_OPTS , machine_class); +default_drive (default_floppy, snapshot,IF_FLOPPY ,0 ,FD_OPTS , + machine_class); +default_drive (default_sdcard, snapshot,IF_SD ,0 ,SD_OPTS , machine_class);if (qemu_opts_foreach (qemu_find_opts ("numa" ), numa_init_func,NULL ,1 ) !=0 ) {
Re: [Qemu-devel] [RFC v2 2/3] Add units-per-idebus property
Quoted 209 lines · Markus Armbruster
Quoted 40 lines · John Snow
Signed-off-by John Snow <[email protected]>--- blockdev.c | 10 ++++++++-- device-hotplug.c | 2 +- hw/i386/pc_q35.c | 3 ++- include/hw/boards.h | 3 ++- include/sysemu/blockdev.h | 2 +- vl.c | 19 +++++++++++-------- 6 files changed, 25 insertions(+), 14 deletions(-)blockdev.c +3
-1@@ -45,6 +45,7 @@#include "qmp-commands.h" #include "trace.h" #include "sysemu/arch_init.h" +#include "hw/boards.h" static QTAILQ_HEAD(drivelist, DriveInfo) drives = QTAILQ_HEAD_INITIALIZER(drives);@@ -643,7 +644,7 @@ QemuOptsList qemu_legacy_drive_opts = { }, }; -DriveInfo *drive_new (QemuOpts *all_opts,BlockInterfaceType block_default_type) +DriveInfo *drive_new (QemuOpts *all_opts,MachineClass *mc) {const char *value;DriveInfo *dinfo =NULL ;@@ -651,6 +652,7 @@ DriveInfo *drive_new(QemuOpts *all_opts, BlockInterfaceType block_default_type)QemuOpts *legacy_opts;DriveMediaType media =MEDIA_DISK ;BlockInterfaceType type; +BlockInterfaceType block_default_type = mc->block_default_type;int cyls, heads, secs, translation;int max_devs, bus_id, unit_id, index;const char *devaddr;blockdev.c DriveInfo *drive_new(QemuOpts *all_opts, BlockInterfaceType block_default_type) · line 837
Quoted 9 lines
blockdev.c +5
-1@@ -828,7 +830,11 @@ DriveInfo *drive_new(QemuOpts *all_opts, BlockInterfaceType block_default_type) unit_id =qemu_opt_get_number (legacy_opts,"unit" ,-1 ); index =qemu_opt_get_number (legacy_opts,"index" ,-1 ); - max_devs = if_max_devs[type]; +if (type ==IF_IDE && mc->units_per_idebus) { + max_devs = mc->units_per_idebus; + }else { + max_devs = if_max_devs[type]; + }This overrides if_max_devs[IF_IDE] in one out of three places.
if_max_devs[type] governs the mapping between index and (bus, unit).
If it's zero, then (bus, unit) = (0, index).
Else, (bus, unit) = (index /
max_devs, index %max_devs).Overriding it just here affects these things:
* Picking a default when the user specifies neither index nor unit
* Range checking unit
* Default ID, but let's ignore that for now
It does *not* affect
drive_index_to_bus_id(),drive_index_to_unit_id(), i.e. the actual mapping between index and (bus, unit)! index=1 is still mapped to (bus, unit) = (0, 1). No good.Testing (needs an incremental fix, see below) confirms:
qemu: -drive if=ide,media=cdrom,index=1: unit 1 too big (max is 0)
You have to override if_max_devs[] consistently.
You provide for overriding if_max_devs[IF_IDE] only. It'll do for now.
Quoted 21 lines
blockdev.c +0
-0if (index !=-1 ) {if (bus_id !=0 || unit_id !=-1 ) {device-hotplug.c +1
-1@@ -40,7 +40,7 @@ DriveInfo *add_init_drive(const char *optstr)return NULL ; mc =MACHINE_GET_CLASS (current_machine); - dinfo =drive_new (opts, mc->block_default_type); + dinfo =drive_new (opts, mc);if (!dinfo) {qemu_opts_del (opts);return NULL ;hw/i386/pc_q35.c +0
-0hw/i386/pc_q35.c static void pc_q35_init_1_4(MachineState *machine) · line 353
Quoted 7 lines
hw/i386/pc_q35.c +2
-1@@ -348,7 +348,8 @@ static void pc_q35_init_1_4(MachineState *machine)#define PC_Q35_2_2_MACHINE_OPTIONS \ PC_Q35_MACHINE_OPTIONS, \ - .default_machine_opts = "firmware=bios-256k.bin" + .default_machine_opts = "firmware=bios-256k.bin", \ + .units_per_idebus = 1I figrue this keeps -drive if=ide for older Q35 machines compatibly broken. If that's what we want to do...
Quoted 7 lines
hw/i386/pc_q35.c +0
-0static QEMUMachine pc_q35_machine_v2_2 = {PC_Q35_2_2_MACHINE_OPTIONS ,include/hw/boards.h +0
-0include/hw/boards.h struct QEMUMachine { · line 43
Quoted 7 lines
include/hw/boards.h +1
-0@@ -37,6 +37,7 @@ struct QEMUMachine { no_cdrom:1 , no_sdcard:1;int is_default; +unsigned short units_per_idebus;const char *default_machine_opts;const char *default_boot_order;GlobalProperty *compat_props;if_max_devs[] and the
max_devsvariables are all int. I'd rather not mix signed and unsigned without needinclude/hw/boards.h struct MachineClass { · line 106
Quoted 13 lines
include/hw/boards.h +1
-1@@ -95,11 +96,11 @@ struct MachineClass { no_cdrom:1 , no_sdcard:1;int is_default; +unsigned short units_per_idebus;const char *default_machine_opts;const char *default_boot_order;GlobalProperty *compat_props;const char *hw_version; - HotplugHandler *(*get_hotplug_handler)(MachineState *machine, DeviceState *dev); };Let's keep the blank line separating the instance variables from the method.
Quoted 49 lines
include/sysemu/blockdev.h +1
-1@@ -55,7 +55,7 @@ DriveInfo *drive_get_by_blockdev(BlockDriverState *bs);QemuOpts *drive_def (const char *optstr);QemuOpts *drive_add (BlockInterfaceType type,int index,const char *file,const char *optstr); -DriveInfo *drive_new (QemuOpts *arg,BlockInterfaceType block_default_type); +DriveInfo *drive_new (QemuOpts *arg,MachineClass *mc);void drive_del (DriveInfo *dinfo);/* device-hotplug */ vl.c +5
-4@@ -1151,9 +1151,9 @@ static int cleanup_add_fd(QemuOpts *opts, void *opaque)static int drive_init_func (QemuOpts *opts,void *opaque) { -BlockInterfaceType *block_default_type = opaque; +MachineClass *mc = opaque; -return drive_new (opts, *block_default_type) ==NULL ; +return drive_new (opts, mc) ==NULL ; }static int drive_enable_snapshot (QemuOpts *opts,void *opaque)@@ -1165,7 +1165,7 @@ static int drive_enable_snapshot(QemuOpts *opts, void *opaque) }static void default_drive (int enable,int snapshot,BlockInterfaceType type, -int index,const char *optstr) +int index,const char *optstr,MachineClass *mc) {QemuOpts *opts;@@ -1177,7 +1177,8 @@ static void default_drive(int enable, int snapshot, BlockInterfaceType type,if (snapshot) {drive_enable_snapshot (opts,NULL ); } -if (!drive_new (opts, type)) { + +if (!drive_new (opts, mc)) {exit (1 ); } }vl.c static void machine_class_init(ObjectClass *oc, void *data) · line 1590
Quoted 7 lines
vl.c +1
-0@@ -1583,6 +1584,7 @@ static void machine_class_init(ObjectClass *oc, void *data) mc->hot_add_cpu = qm->hot_add_cpu; mc->kvm_type = qm->kvm_type; mc->block_default_type = qm->block_default_type; + mc->units_per_idebus = qm->units_per_idebus; mc->max_cpus = qm->max_cpus; mc->no_serial = qm->no_serial; mc->no_parallel = qm->no_parallel;Not sufficient! You missed the duplicated code in
pc_generic_machine_class_init(). That something was missing was quite obvious in my testing, although what was missing was not. This is the fix I mentioned above.
Quoted 4 lines
Marcel, you touched both copies recently. Do you know why we need two of them? And why do we copy from QEMUMachine to MachineClass member by member? Why can't we just point from MachineClass to QEMUMachine? Or at least embed the struct so we can copy it wholesale?
Hi Markus,
I'll try to explain the design:
1. MachineClass should not be aware of QEMUMachine. The objective here is to eliminate QEMUMachine and it should not be part of MachineClass at any cost.
2. The plan is like this:
- The machine types that are not yet QOMified will be QOMified on the fly by qemu_register_machine (vl.c) that calls machine_class_init and matches QEMUMachine fields with MachineClass fields.
- This mechanism will be removed when all machines are QOMified. (never? :) )
- Machines that are QOMified will not reach this code at all, but follow the normal QOM path.
As you can see, by design there is no duplication.
Now let's get to PC machines case:
- This is a "weird" use case of hybrid QOMifying.
- All that the author wanted was to have all the PC machines
derive from type TYPE_PC_MACHINE, but didn't have the time/resources/will to go over every PC machine and QOMify it. But he did need the common class.
- His implementation:
- He couldn't use the generic qemu_register_machine because the PC machines would not have derived from MACHINE_PC_TYPE.
- So he used the following logic:
- from the vl.c point of view, the PC machines are QOMified, so the PC machines registration *does not reach vl.c".
- from the PC machines point of view, they remained not QOMified.
- qemu_register_pc_machine mimics vl.c registration *only for pc machines* and has to copy the fields by itself. Plus, it gives the PC machines a common base class, the thing he was interested in in the first place.
I hope it helped,
Marcel
Quoted 21 lines
Quoted 21 lines
vl.c +5
-4@@ -4376,14 +4378,15 @@ int main(int argc, char **argv, char **envp)if (snapshot)qemu_opts_foreach (qemu_find_opts ("drive" ), drive_enable_snapshot,NULL ,0 );if (qemu_opts_foreach (qemu_find_opts ("drive" ), drive_init_func, - &machine_class->block_default_type,1 ) !=0 ) { + machine_class,1 ) !=0 ) {exit (1 ); }default_drive (default_cdrom, snapshot, machine_class->block_default_type,2 , -CDROM_OPTS ); -default_drive (default_floppy, snapshot,IF_FLOPPY ,0 ,FD_OPTS ); -default_drive (default_sdcard, snapshot,IF_SD ,0 ,SD_OPTS ); +CDROM_OPTS , machine_class); +default_drive (default_floppy, snapshot,IF_FLOPPY ,0 ,FD_OPTS , + machine_class); +default_drive (default_sdcard, snapshot,IF_SD ,0 ,SD_OPTS , machine_class);if (qemu_opts_foreach (qemu_find_opts ("numa" ), numa_init_func,NULL ,1 ) !=0 ) {
Re: [Qemu-devel] [RFC v2 2/3] Add units-per-idebus property
Quoted 4 lines · Marcel Apfelbaum
Quoted 3 lines · Markus Armbruster
Quoted 1 line · John Snow
Signed-off-by John Snow <[email protected]>
[...]
Quoted 20 lines
Quoted 14 lines
vl.c static void machine_class_init(ObjectClass *oc, void *data) · line 1590
Quoted 8 lines
vl.c +1
-0@@ -1583,6 +1584,7 @@ static void machine_class_init(ObjectClass *oc, void *data) mc->hot_add_cpu = qm->hot_add_cpu; mc->kvm_type = qm->kvm_type; mc->block_default_type = qm->block_default_type; + mc->units_per_idebus = qm->units_per_idebus; mc->max_cpus = qm->max_cpus; mc->no_serial = qm->no_serial; mc->no_parallel = qm->no_parallel;Not sufficient! You missed the duplicated code in
pc_generic_machine_class_init(). That something was missing was quite obvious in my testing, although what was missing was not. This is the fix I mentioned above.Quoted 4 lines
Marcel, you touched both copies recently. Do you know why we need two of them? And why do we copy from QEMUMachine to MachineClass member by member? Why can't we just point from MachineClass to QEMUMachine? Or at least embed the struct so we can copy it wholesale?
Hi Markus,
Quoted 8 lines
I'll try to explain the design:
1. MachineClass should not be aware of QEMUMachine. The objective here is to eliminate QEMUMachine and it should not be part of MachineClass at any cost.
2. The plan is like this:
- The machine types that are not yet QOMified will be QOMified on the fly byqemu_register_machine(vl.c) that callsmachine_class_initand matches QEMUMachine fields with MachineClass fields.
- This mechanism will be removed when all machines are QOMified. (never? :) )
Okay %-)
Quoted 4 lines
- Machines that are QOMified will not reach this code at all, but follow the normal QOM path.
As you can see, by design there is no duplication.
Quoted 15 lines
Now let's get to PC machines case:
- This is a "weird" use case of hybrid QOMifying.
- All that the author wanted was to have all the PC machines
derive from typeTYPE_PC_MACHINE, but didn't have the time/resources/will to go over every PC machine and QOMify it. But he did need the common class.
- His implementation:
- He couldn't use the genericqemu_register_machinebecause the PC machines would not have derived fromMACHINE_PC_TYPE.
- So he used the following logic:
- from thevl.cpoint of view, the PC machines are QOMified, so the PC machines registration *does not reachvl.c".
- from the PC machines point of view, they remained not QOMified.
-qemu_register_pc_machinemimicsvl.cregistration *only for pc machines* and has to copy the fields by itself. Plus, it gives the PC machines a common base class, the thing he was interested in in the first place.
Artifact of this hackery: two identical static functions: vl.c's machine_class_init() and pc.c's pc_generic_machine_class_init(). Trap for the unwary, and it caught John.
Unless there are plans to get rid of pc_generic_machine_class_init() fairly soon, I'd recommend to give machine_class_init() external linkage with a suitable comment, and drop pc_generic_machine_class_init().
Quoted 1 line
I hope it helped,
Sure did!
I checked the CodeTransitions Wiki page. It covers this work, and points to http://wiki.qemu.org/Features/QOM/Machine for more information. Good.
RFC v2 3/3 ahci: implement -cdrom and -hd[a-d]
In reply to John Snow--- hw/i386/pc_q35.c | 3 +++ hw/ide/ahci.c | 31 +++++++++++++++++++++++++++++++ hw/ide/ahci.h | 3 +++ 3 files changed, 37 insertions(+)
hw/i386/pc_q35.c +3 -0
@@ -86,6 +86,7 @@ static void pc_q35_init(MachineState *machine)DeviceState *icc_bridge;PcGuestInfo *guest_info;ram_addr_t lowmem; +DriveInfo *hd[MAX_SATA_PORTS ];/* Check whether RAM fits below 4G (leaving 1/2 GByte for IO memory * and 256 Mbytes for PCI Express Enhanced Configuration Access Mapping
@@ -253,6 +254,8 @@ static void pc_q35_init(MachineState *machine) true, "ich9-ahci"); idebus[0 ] =qdev_get_child_bus (&ahci->qdev,"ide.0" ); idebus[1 ] =qdev_get_child_bus (&ahci->qdev,"ide.1" ); +ahci_drive_get (ahci, hd); +ahci_ide_create_devs (ahci, hd);if (usb_enabled (false)) {/* Should we create 6 UHCI according to ich9 spec? */
hw/ide/ahci.c +31 -0
@@ -1402,3 +1402,34 @@ static void sysbus_ahci_register_types(void) }type_init (sysbus_ahci_register_types) + +void ahci_drive_get(PCIDevice *dev, DriveInfo **tab) +{ +AHCIPCIState *d =ICH_AHCI (dev); +AHCIState *ahci = &d->ahci; +unsigned i; + +if ((i =drive_get_max_bus (IF_IDE )) >= ahci->ports) { +fprintf (stderr,"AHCI: Too many IDE buses defined for AHCI (%d > %d)\n" , + i, ahci->ports -1 ); + } + +for (i =0 ; i < ahci->ports; ++i) { + tab[i] =drive_get_by_index (IF_IDE , i); + } +} + +void ahci_ide_create_devs (PCIDevice *dev,DriveInfo **tab) +{ +AHCIPCIState *d =ICH_AHCI (dev); +AHCIState *ahci = &d->ahci; +unsigned i; + +for (i =0 ; i < ahci->ports; i++) { +if (tab[i] ==NULL ) { +continue ; + } +ide_create_drive (&ahci->dev[i].port,0 , tab[i]); + } + +}
hw/ide/ahci.h +3 -0
@@ -332,4 +332,7 @@ void ahci_uninit(AHCIState *s);void ahci_reset (AHCIState *s); +void ahci_drive_get (PCIDevice *dev,DriveInfo **tab); +void ahci_ide_create_devs (PCIDevice *dev,DriveInfo **tab); +#endif /* HW_IDE_AHCI_H */
Signature · 1 line
1.9.3
Re: [Qemu-devel] [RFC v2 3/3] ahci: implement -cdrom and -hd[a-d]
Quoted 34 lines · John Snow
Signed-off-by John Snow <[email protected]>--- hw/i386/pc_q35.c | 3 +++ hw/ide/ahci.c | 31 +++++++++++++++++++++++++++++++ hw/ide/ahci.h | 3 +++ 3 files changed, 37 insertions(+)hw/i386/pc_q35.c +3
-0@@ -86,6 +86,7 @@ static void pc_q35_init(MachineState *machine)DeviceState *icc_bridge;PcGuestInfo *guest_info;ram_addr_t lowmem; +DriveInfo *hd[MAX_SATA_PORTS ];/* Check whether RAM fits below 4G (leaving 1/2 GByte for IO memory * and 256 Mbytes for PCI Express Enhanced Configuration Access Mapping @@ -253,6 +254,8 @@ static void pc_q35_init(MachineState *machine) true, "ich9-ahci"); idebus[0 ] =qdev_get_child_bus (&ahci->qdev,"ide.0" ); idebus[1 ] =qdev_get_child_bus (&ahci->qdev,"ide.1" ); +ahci_drive_get (ahci, hd); +ahci_ide_create_devs (ahci, hd);if (usb_enabled (false)) {/* Should we create 6 UHCI according to ich9 spec? */ hw/ide/ahci.c +0
-0@@ -1402,3 +1402,34 @@ static void sysbus_ahci_register_types(void) }
hw/ide/ahci.c static void sysbus_ahci_register_types(void) · line 1412
Quoted 10 lines
hw/ide/ahci.c +8
-0type_init (sysbus_ahci_register_types) + +void ahci_drive_get(PCIDevice *dev, DriveInfo **tab) +{ +AHCIPCIState *d =ICH_AHCI (dev); +AHCIState *ahci = &d->ahci; +unsigned i; + +if ((i =drive_get_max_bus (IF_IDE )) >= ahci->ports) {
I might be one of the strongest advocates for brevity on this list, but even I frown on embedding assignments in conditionals without a genuine need, and on reusing loop counters for unrelated purposes.
Moreover, you're mixing signed and unsigned: drive_get_max_bus() returns int, ahci->ports is int32_t, but your i is unsigned. Breaks when drive_get_max_bus() returns -1 because no IF_IDE drives are defined:
$ qemu -vnc :0 -M q35 -nodefaults
AHCI: Too many IDE buses defined for AHCI (-1 > 5)Stick to int.
int n, i;
n = drive_get_max_bus(IF_IDE);
if (n >= ahci->ports) {hw/ide/ahci.c static void sysbus_ahci_register_types(void) · line 1417
Quoted 5 lines
hw/ide/ahci.c +5
-0+fprintf (stderr,"AHCI: Too many IDE buses defined for AHCI (%d > %d)\n" , + i, ahci->ports -1 ); + } + +for (i =0 ; i < ahci->ports; ++i) {
Compares unsigned i with signed ahci->ports. Stick to int.
hw/ide/ahci.c static void sysbus_ahci_register_types(void) · line 1428
Quoted 11 lines
hw/ide/ahci.c +11
-0+ tab[i] =drive_get_by_index (IF_IDE , i); + } +} + +void ahci_ide_create_devs (PCIDevice *dev,DriveInfo **tab) +{ +AHCIPCIState *d =ICH_AHCI (dev); +AHCIState *ahci = &d->ahci; +unsigned i; + +for (i =0 ; i < ahci->ports; i++) {
Likewise.
Quoted 19 lines
hw/ide/ahci.c +7
-0+if (tab[i] ==NULL ) { +continue ; + } +ide_create_drive (&ahci->dev[i].port,0 , tab[i]); + } + +}hw/ide/ahci.h +3
-0@@ -332,4 +332,7 @@ void ahci_uninit(AHCIState *s);void ahci_reset (AHCIState *s); +void ahci_drive_get (PCIDevice *dev,DriveInfo **tab); +void ahci_ide_create_devs (PCIDevice *dev,DriveInfo **tab); +#endif /* HW_IDE_AHCI_H */
Quoted 7 lines · John Snow
This is an extremely rough/quick sketch of a -cdrom/-hda desugaring fix for Q35/AHCI.
Before I spent any time on it, I wanted feedback from Markus or anyone else who had concerns about how this problem would get fixed.
Quoted 5 lines
This is, then, rough approach #2.
Highlights:
(1) Add a board property (instead of a HBA property, sigh) that defines how we should map (index, (bus,unit)).
Imperfect, but it'll do for now. The place in the boards that sets it should point to the HBA in a comment.
Quoted 7 lines
(2) Modify
drive_newto accept the MachineClass instead of the default interface type. This does not affect how default drives get added, because any over-rides to the "default type" get handled in options, so while it appears we have removed the type of default drives, we have not.
Quoted 5 lines
(3) Create helpers for AHCI to assist the Q35 board in populating the AHCI device with the IDE drives.
(4) Create a helper to whine at us for oversights and help bug reporters give us more meaningful information.
General approach looks good to me; I can see only coding bugs, not design flaws.
Quoted 25 lines · Markus Armbruster
Quoted 7 lines · John Snow
This is an extremely rough/quick sketch of a -cdrom/-hda desugaring fix for Q35/AHCI.
Before I spent any time on it, I wanted feedback from Markus or anyone else who had concerns about how this problem would get fixed.
Quoted 5 lines
This is, then, rough approach #2.
Highlights:
(1) Add a board property (instead of a HBA property, sigh) that defines how we should map (index, (bus,unit)).Imperfect, but it'll do for now. The place in the boards that sets it should point to the HBA in a comment.
Quoted 7 lines
(2) Modify
drive_newto accept the MachineClass instead of the default interface type. This does not affect how default drives get added, because any over-rides to the "default type" get handled in options, so while it appears we have removed the type of default drives, we have not.
Quoted 9 lines
Quoted 5 lines
(3) Create helpers for AHCI to assist the Q35 board in populating the AHCI device with the IDE drives.
(4) Create a helper to whine at us for oversights and help bug reporters give us more meaningful information.
General approach looks good to me; I can see only coding bugs, not design flaws.
I rewrote this series and was about to send it out, but it does fail the bios-tables-test because this test uses this command line:
-net none -display none -machine q35,accel=tcg -drive file=tests/acpi-test-disk.raw,id=hd0 -device ide-hd,drive=hd0,
Notice it doesn't say if=none for the drive, so after fixing Q35, this actually creates a new failure in this test because we will create the drive (and device), then fail when trying to create the second device attached to the same drive.
I think this test is at fault, but I wanted to be duly diligent and ask the question: "Is it a big deal if I break backwards compatibility with broken scripts?"
Signature · 1 line
—js
Quoted 36 lines · John Snow
Quoted 25 lines · Markus Armbruster
Quoted 7 lines · John Snow
This is an extremely rough/quick sketch of a -cdrom/-hda desugaring fix for Q35/AHCI.
Before I spent any time on it, I wanted feedback from Markus or anyone else who had concerns about how this problem would get fixed.
Quoted 5 lines
This is, then, rough approach #2.
Highlights:
(1) Add a board property (instead of a HBA property, sigh) that defines how we should map (index, (bus,unit)).Imperfect, but it'll do for now. The place in the boards that sets it should point to the HBA in a comment.
Quoted 7 lines
(2) Modify
drive_newto accept the MachineClass instead of the default interface type. This does not affect how default drives get added, because any over-rides to the "default type" get handled in options, so while it appears we have removed the type of default drives, we have not.Quoted 9 lines
Quoted 5 lines
(3) Create helpers for AHCI to assist the Q35 board in populating the AHCI device with the IDE drives.
(4) Create a helper to whine at us for oversights and help bug reporters give us more meaningful information.
General approach looks good to me; I can see only coding bugs, not design flaws.
Quoted 5 lines
I rewrote this series and was about to send it out, but it does fail the bios-tables-test because this test uses this command line:
-net none -display none -machine q35,accel=tcg -drive file=tests/acpi-test-disk.raw,id=hd0 -device ide-hd,drive=hd0,
qemu: -device ide-hd,drive=hd: Property 'ide-hd.drive' can't take value 'hd', it's in use
Quoted 4 lines
Notice it doesn't say if=none for the drive, so after fixing Q35, this actually creates a new failure in this test because we will create the drive (and device), then fail when trying to create the second device attached to the same drive.
Exactly.
Code in question:
const char *device = "";
if (!g_strcmp0(data->machine, MACHINE_Q35)) {
device = ",id=hd -device ide-hd,drive=hd";
}
args = g_strdup_printf("-net none -display none %s -drive file=%s%s,",
params ? params : "", disk, device);
qtest_start(args);Called twice:
1. data->machine = MACHINE_PC (really: "pc")
params = "-machine accel=tcg"
Thus, args = "-net none -display none -machine accel=tcg" " -drive file=tests/acpi-test-disk.raw,"
Neither if, bus, unit, nor index specified with -drive, so this asks board code to set up an IDE disk (bus, unit) = (0,0), and the board code complies.
2. data->machine == MACHINE_Q35 (really: "q35",
params = "-machine q35,accel=tcg"
Thus, args = ""-net none -display none -machine q35,accel=tcg" " -drive file=tests/acpi-test-disk.raw,id=hd -device ide-hd,drive=hd,"
Again, this asks board code for IDE disk (0,0). Before your patch, board code silently ignores the request. Afterwards, it complies.
Additionally, it sets up another IDE disk (0,0) with device, exploiting the misfeature that -device *can* use a drive with if=ide. Uses the same drive with two device models, which is unsafe and duly rejected.
The special case for q35 is for coping with the lack of a working -drive if=ide. A working if=ide makes it unnecessary and brings out its flaws.
Even before your patch, the special case is unnecessary: "-drive if=none,id=hd,file=... -drive ide-hd,drive=hd" would do for both machine types. I'd make that change in a preliminary patch, because that avoids polluting the meat of your patching with correcting test bugs.
Quoted 3 lines
I think this test is at fault, but I wanted to be duly diligent and ask the question: "Is it a big deal if I break backwards compatibility with broken scripts?"
Where "broken scripts" means "our users' broken scripts (if any)".
On the one hand, we've always told users that -device goes with a -drive if=none. On the other hand, using a drive not picked up by board code has always worked anyway.
If we want to remain bug-compatible, we need to make the q35 board code pick up the IF_IDE drives only for new machine types. Feasible. But is it worthwhile?