ath3k: Add support of MCI 13d3:3408 bt device

Add support for bluetooth MCI WB335 (AR9565) Wi-Fi+bt module. This bluetooth module requires loading patch and sysconfig by ath3k driver.

/sys/kernel/debug/usb/devices

T:  Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 20 Spd=12 MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P:  Vendor=13d3 ProdID=3408 Rev= 0.02
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by Dmitry Tunin<[email protected]>

drivers/bluetooth/ath3k.c +1 -0

    /* Atheros AR5BBU12 with sflash firmware */

@@ -156,6 +157,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
    { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
    { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
    { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
+    { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
    { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
 
    /* Atheros AR5BBU22 with sflash firmware */

drivers/bluetooth/btusb.c +0 -0

index edfc17b..091c813 100644

Hi Dmitry,

Quoted 33 lines

Add support for bluetooth MCI WB335 (AR9565) Wi-Fi+bt module. This bluetooth module requires loading patch and sysconfig by ath3k driver.

/sys/kernel/debug/usb/devices

T:  Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 20 Spd=12 MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P:  Vendor=13d3 ProdID=3408 Rev= 0.02
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Quoted 1 line

Signed-off-by Dmitry Tunin<[email protected]>

space between the name and the email address.

drivers/bluetooth/ath3k.c static const struct usb_device_id ath3k_table[] = { · line 109

Quoted 13 lines

---

drivers/bluetooth/ath3k.c +1 -0

index d85ced2..086240c 100644
@@ -105,6 +105,7 @@ static const struct usb_device_id ath3k_table[] = {
     { USB_DEVICE(0x13d3, 0x3375) },
     { USB_DEVICE(0x13d3, 0x3393) },
     { USB_DEVICE(0x13d3, 0x3402) },
+    { USB_DEVICE(0x13d3, 0x3408) },
     { USB_DEVICE(0x13d3, 0x3432) },

And your mail client messes up spaces vs tabs here.

Quoted 15 lines

drivers/bluetooth/ath3k.c +1 -0

     /* Atheros AR5BBU12 with sflash firmware */

@@ -156,6 +157,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
     { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
     { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
     { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
+    { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
     { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
 
     /* Atheros AR5BBU22 with sflash firmware */

drivers/bluetooth/btusb.c +0 -0

index edfc17b..091c813 100644

drivers/bluetooth/btusb.c static const struct usb_device_id blacklist_table[] = { · line 188

Quoted 7 lines

drivers/bluetooth/btusb.c +1 -0

@@ -182,6 +182,7 @@ static const struct usb_device_id blacklist_table[] = {
     { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
     { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
     { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
+    { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
     { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
 
     /* Atheros AR5BBU12 with sflash firmware */

Regards

Marcel

Add support for bluetooth MCI WB335 (AR9565) Wi-Fi+bt module. This bluetooth module requires loading patch and sysconfig by ath3k driver.

CC [email protected]

Signed-off-by Dmitry Tunin <[email protected]>

---

drivers/bluetooth/ath3k.c +0 -0

index d85ced2..086240c 100644