ath3k: Add support of MCI 13d3:3408 bt device

PATCH In review Dmitry Tunin 4 participants 7 messages Nov 25, 2014 – Dec 5, 2014

Subsystems (2)

Stable branch Bluetooth drivers

lore

Share & tools

lore

Dmitry Tunin

author

2014-11-25 17:19 UTC #0 lore raw

PATCH v6 1/1 ath3k: Add support of MCI 13d3:3408 bt device

Add support for bluetooth MCI WB335 (AR9565) Wi-Fi+bt module. This bluetooth module requires loading patch and sysconfig by ath3k driver.

T:  Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 20 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3408 Rev= 0.02
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms

CC [email protected]

Signed-off-by Dmitry Tunin <[email protected]>

---

drivers/bluetooth/ath3k.c +2 -0

index d85ced2..086240c 100644
@@ -105,6 +105,7 @@ static const struct usb_device_id ath3k_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3375) },
 	{ USB_DEVICE(0x13d3, 0x3393) },
 	{ USB_DEVICE(0x13d3, 0x3402) },
+	{ USB_DEVICE(0x13d3, 0x3408) },
 	{ USB_DEVICE(0x13d3, 0x3432) },
 
 	/* Atheros AR5BBU12 with sflash firmware */

@@ -156,6 +157,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
 	{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU22 with sflash firmware */

drivers/bluetooth/btusb.c +1 -0

index edfc17b..091c813 100644
@@ -182,6 +182,7 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU12 with sflash firmware */

Marcel Holtmann

maintainer

2014-11-26 05:05 UTC #1 lore raw

Hi Dmitry,

Quoted 32 lines

Add support for bluetooth MCI WB335 (AR9565) Wi-Fi+bt module. This bluetooth module requires loading patch and sysconfig by ath3k driver.

T:  Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 20 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3408 Rev= 0.02
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Quoted 2 lines

CC [email protected]
Signed-off-by Dmitry Tunin <[email protected]>

so you really need to make sure to send only one version. I now have two patches labeled as v6 and I have no idea which one is recent and which one I am suppose to apply.

I tried applying this one, but it failed. Patches need to be based against bluetooth-next tree.

Applying: ath3k: Add support of MCI 13d3:3408 bt device
error: patch failed: drivers/bluetooth/ath3k.c:105
error: drivers/bluetooth/ath3k.c: patch does not apply
error: patch failed: drivers/bluetooth/btusb.c:182
error: drivers/bluetooth/btusb.c: patch does not apply Patch failed at 0001 ath3k: Add support of MCI 13d3:3408 bt device

Regards

Marcel

Dmitry Tunin

author

2014-11-26 08:04 UTC #2 lore raw

Hi all,

I spent already hours on sending this fucking email. The patch works for me. And if someone else is interested in working of this device feel free and do it yourself.

Quoted 52 lines · Marcel Holtmann

Hi Dmitry,
Quoted 32 lines
Add support for bluetooth MCI WB335 (AR9565) Wi-Fi+bt module. This bluetooth module requires loading patch and sysconfig by ath3k driver.
T:  Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 20 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3408 Rev= 0.02
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
Quoted 2 lines
CC [email protected]
Signed-off-by Dmitry Tunin <[email protected]>
so you really need to make sure to send only one version. I now have two patches labeled as v6 and I have no idea which one is recent and which one I am suppose to apply.
I tried applying this one, but it failed. Patches need to be based against bluetooth-next tree.
Applying: ath3k: Add support of MCI 13d3:3408 bt device
error: patch failed: drivers/bluetooth/ath3k.c:105
error: drivers/bluetooth/ath3k.c: patch does not apply
error: patch failed: drivers/bluetooth/btusb.c:182
error: drivers/bluetooth/btusb.c: patch does not apply Patch failed at 0001 ath3k: Add support of MCI 13d3:3408 bt device
Regards
Marcel

Marcel Holtmann

maintainer

2014-11-26 08:50 UTC #3 lore raw

Hi Dmitry,

Quoted 1 line

I spent already hours on sending this fucking email. The patch works for me. And if someone else is interested in working of this device feel free and do it yourself.

so you are blaming the maintainers. Thank you very much :(

Maybe reading Documentation/SubmittingPatches and just following the steps in there would get you what you wanted. Others have successfully submitted tons and tons of patches.

Regards

Marcel

Dmitry Tunin

author

2014-11-26 08:59 UTC #4 lore raw

I do not blame anyone. I am not paid for submitting patches. I've done some work to find a solution. You can treat my post as a bug report.

I know it as a very hard 'extra work' to edit my mail, or remove a duplicate of a 3 line patch. But the whole thing is too much of an extra work for me. I am not interested any more. If this patch is ignored, I don't care, since MY bluetooth module works.

My patch was against 3.18rc5. I do not plan to download any other branches, build and test them anyway.

And tell Canonical that it is not good to send users upstream. It is distro maintainers job, not users.

Regards,

Dmitry

Quoted 12 lines · Marcel Holtmann

Hi Dmitry,
Quoted 1 line
I spent already hours on sending this fucking email. The patch works for me. And if someone else is interested in working of this device feel free and do it yourself.
so you are blaming the maintainers. Thank you very much :(
Maybe reading Documentation/SubmittingPatches and just following the steps in there would get you what you wanted. Others have successfully submitted tons and tons of patches.
Regards
Marcel

Michel Memeteau - EKIMIA

2014-12-05 09:18 UTC #5 lore raw

In reply to Dmitry Tunin

Thanks for your work dimitry,

I need to make AR9565 BT work with Kernel 3.13 on Ubuntu 14.04 so I'm really interrested in what you did.

Regards. <------------------------------------------------------------------------------------------------------------------> Michel Memeteau - Directeur.

Notre Boutique Ordinateurs GNU/Linux : http://shop.ekimia.fr
49 chemin de l'union 13720 La Bouilladisse - France.
Fixe : +33 (0) 972308334 Mobile : +33(0) 624808051
<------------------------------------------------------------------------------------------------------------------>

2014-11-26 9:04 GMT+01:00 Dmitry Tunin <[email protected]>:

Quoted 71 lines

Hi all,
I spent already hours on sending this fucking email. The patch works for me. And if someone else is interested in working of this device feel free and do it yourself.
Quoted 54 lines · Marcel Holtmann
Hi Dmitry,
Quoted 33 lines
Add support for bluetooth MCI WB335 (AR9565) Wi-Fi+bt module. This bluetooth module requires loading patch and sysconfig by ath3k driver.
T:  Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 20 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3408 Rev= 0.02
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
Quoted 2 lines
CC [email protected]
Signed-off-by Dmitry Tunin <[email protected]>
so you really need to make sure to send only one version. I now have two patches labeled as v6 and I have no idea which one is recent and which one I am suppose to apply.
I tried applying this one, but it failed. Patches need to be based against bluetooth-next tree.
Applying: ath3k: Add support of MCI 13d3:3408 bt device
error: patch failed: drivers/bluetooth/ath3k.c:105
error: drivers/bluetooth/ath3k.c: patch does not apply
error: patch failed: drivers/bluetooth/btusb.c:182
error: drivers/bluetooth/btusb.c: patch does not apply Patch failed at 0001 ath3k: Add support of MCI 13d3:3408 bt device
Quoted 4 lines
Regards
Marcel
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

Johan Hedberg

2014-11-26 17:49 UTC #6 lore raw

In reply to Dmitry Tunin

Hi Dmitry,

Quoted 32 lines · Dmitry Tunin

Add support for bluetooth MCI WB335 (AR9565) Wi-Fi+bt module. This bluetooth module requires loading patch and sysconfig by ath3k driver.

T:  Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 20 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3408 Rev= 0.02
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Quoted 3 lines

CC [email protected]
Signed-off-by Dmitry Tunin <[email protected]>
---

I was able to apply this patch successfully. It has now been pushed to the upstream bluetooth-next tree. Thanks.

Johan