ls1:config: Add USB support for ls1021atwr
PATCH 1/1 ls1:config: Add USB support for ls1021atwr
Add USB EHCI/XHCI support for ls1021atwr platform and making xHCI as default mode
--- include/configs/ls1021atwr.h | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)
include/configs/ls1021atwr.h +28 -0
@@ -28,6 +28,34 @@#define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE/* +* USB +*/ +/*EHCI Support*/ +/*#define CONFIG_HAS_FSL_DR_USB*/ + +#ifdef CONFIG_HAS_FSL_DR_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_FSL +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#endif + +/*XHCI Support*/ +#define CONFIG_HAS_FSL_XHCI_USB + +#ifdef CONFIG_HAS_FSL_XHCI_USB +#define CONFIG_USB_XHCI +#define CONFIG_USB_XHCI_FSL +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 +#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 1 +#endif + +#if defined(CONFIG_HAS_FSL_DR_USB ) || defined(CONFIG_HAS_FSL_XHCI_USB ) +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE +#define CONFIG_CMD_EXT2 +#endif + +/* * Generic Timer Definitions */ #define GENERIC_TIMER_CLK 12500000
Signature · 1 line
1.8.3.1
PATCH 1/1 ls1:config: Add XHCI support for ls1021aqds
Add USB XHCI support for ls1021aqds platform and
making this as default mode
--- include/configs/ls1021aqds.h | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-)
include/configs/ls1021aqds.h +16 -5
@@ -275,19 +275,30 @@ unsigned long get_board_ddr_clk(void);/* * USB */ -#define CONFIG_HAS_FSL_DR_USB +/*EHCI Support*/ +/*#define CONFIG_HAS_FSL_DR_USB*/ #ifdef CONFIG_HAS_FSL_DR_USB #define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_FSL +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#endif -#ifdef CONFIG_USB_EHCI +/*XHCI Support*/ +#define CONFIG_HAS_FSL_XHCI_USB + +#ifdef CONFIG_HAS_FSL_XHCI_USB +#define CONFIG_USB_XHCI +#define CONFIG_USB_XHCI_FSL +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 +#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 1 +#endif + +#if defined(CONFIG_HAS_FSL_DR_USB ) || defined(CONFIG_HAS_FSL_XHCI_USB )#define CONFIG_CMD_USB #define CONFIG_USB_STORAGE -#define CONFIG_USB_EHCI_FSL -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_CMD_EXT2 #endif -#endif /* * eTSEC
Signature · 1 line
1.8.3.1
PATCH 1/1 ls1:config: Add XHCI support for ls1021aqds
Quoted 8 lines · Ramneek Mehresh
Add USB XHCI support for ls1021aqds platform and
making this as default modeSigned-off-by Ramneek Mehresh <[email protected]>--- include/configs/ls1021aqds.h | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-)
Please verify this patch on the latest u-boot. I saw compiling errors.
York
PATCH 1/1 ls1:config: Add USB support for ls1021atwr
In reply to Ramneek MehreshQuoted 8 lines · Ramneek Mehresh
Add USB EHCI/XHCI support for ls1021atwr platform and making xHCI as default mode
Signed-off-by Ramneek Mehresh <[email protected]>--- include/configs/ls1021atwr.h | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)
Please verify this patch on the latest u-boot. I saw compiling errors.
York
PATCH 1/1 ls1:config: Add USB support for ls1021atwr
Quoted 4 lines · York Sun
Quoted 3 lines · Ramneek Mehresh
Add USB EHCI/XHCI support for ls1021atwr platform and making xHCI as default mode
Quoted 8 lines
Quoted 5 lines
Signed-off-by Ramneek Mehresh <[email protected]>--- include/configs/ls1021atwr.h | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)Please verify this patch on the latest u-boot. I saw compiling errors.
Please fix. This patch cause compiling errors on all ls1021atwr boards. If this patch depends on other patches, please put into comment so I can apply them in order.
+drivers/usb/host/built-in.o: In function `usb_lowlevel_init':+drivers/usb/host/xhci.c:948: undefined reference to xhci_hcd_init' +drivers/usb/host/built-in.o: In function usb_lowlevel_stop':+drivers/usb/host/xhci.c:1025: undefined reference to `xhci_hcd_stop' +arm-linux-gnueabi-ld.bfd: BFD (GNU Binutils for Ubuntu) 2.22 assertion fail ../../bfd/elf32-arm.c:7498
+arm-linux-gnueabi-ld.bfd: BFD (GNU Binutils for Ubuntu) 2.22 assertion fail ../../bfd/elf32-arm.c:13830
+make[1]: *** [u-boot] Error 139
+make: *** [sub-make] Error 2
York
PATCH 1/1 ls1:config: Add USB support for ls1021atwr
Quoted 21 lines
-----Original Message-----
From: Sun York-R58495
Sent: Thursday, January 15, 2015 12:16 AM
To: Mehresh Ramneek-B31383; u-boot at lists.denx.de
Subject: Re: [U-Boot] [PATCH] ls1:config: Add USB support for ls1021atwrQuoted 10 lines · York Sun
Quoted 8 lines · Ramneek Mehresh
Add USB EHCI/XHCI support for ls1021atwr platform and making xHCI as default mode
Signed-off-by Ramneek Mehresh <[email protected]>--- include/configs/ls1021atwr.h | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)
Quoted 6 lines
Quoted 2 lines
Please verify this patch on the latest u-boot. I saw compiling errors.
Please fix. This patch cause compiling errors on all ls1021atwr boards. If this patch depends on other patches, please put into comment so I can apply them in order.
Hi York, this patch depends on http://patchwork.ozlabs.org/patch/373593/
which is under review, and has comments from Marex. For this patch, we have dependency on IP team, and that's taking lot of time
Quoted 16 lines
(quoted diff) +6
-0+drivers/usb/host/built-in.o: In function `usb_lowlevel_init': +drivers/usb/host/xhci.c:948: undefined reference to `xhci_hcd_init' +drivers/usb/host/built-in.o: In function `usb_lowlevel_stop': +drivers/usb/host/xhci.c:1025: undefined reference to `xhci_hcd_stop' +arm-linux-gnueabi-ld.bfd: BFD (GNU Binutils for Ubuntu) 2.22 assertion +fail
../../bfd/elf32-arm.c:7498(quoted diff) +2
-0+arm-linux-gnueabi-ld.bfd: BFD (GNU Binutils for Ubuntu) 2.22 assertion +fail
../../bfd/elf32-arm.c:13830(quoted diff) +2
-0+make[1]: *** [u-boot] Error 139 +make: *** [sub-make] Error 2York