fbcon gives mirrored fonts on monochrome display
Hi,
I'm playing with a SSD1306 128x64 monochrome display and fbcon gives me mirrored fonts and some extra lines.
Running fbtest gives me the expected output.
fbtest dump: http://tronnes.org/downloads/fbtest.png
fbcon dump: http://tronnes.org/downloads/fbcon.png
The text should have been:
Raspbian GNU/Lin
raspberrypi logi
fbcon font:VGA8x8: http://tronnes.org/downloads/fbcon8x8.png
ProFont6x11 gives indecipherable text lines:
http://tronnes.org/downloads/fbcon6x11.png
fbdev config:
info->var.bits_per_pixel = 1;
info->fix.visual = FB_VISUAL_MONO10; info->var.red.length = 1;
info->var.red.offset = 0;
info->var.green.length = 1;
info->var.green.offset = 0;
info->var.blue.length = 1;
info->var.blue.offset = 0;
Uses: sys_fillrect, sys_copyarea, sys_imageblit (and deferred_io)
System: Raspberry Pi, ARM, Linux 3.18.3
Does anyone see what this might be?
Regards,
Noralf Trønnes
Hi Noralf,
Quoted 14 lines · Noralf Trønnes
I'm playing with a SSD1306 128x64 monochrome display and fbcon gives me mirrored fonts and some extra lines.
fbdev config:
info->var.bits_per_pixel= 1;
info->fix.visual=FB_VISUAL_MONO10;info->var.red.length= 1;
info->var.red.offset= 0;
info->var.green.length= 1;
info->var.green.offset= 0;
info->var.blue.length= 1;
info->var.blue.offset= 0;
Uses:sys_fillrect,sys_copyarea,sys_imageblit(anddeferred_io)
Quoted 3 lines
System: Raspberry Pi, ARM, Linux 3.18.3
Does anyone see what this might be?
What's the value on CONFIG_FB_CFB_REV_PIXELS_IN_BYTE in your .config? Does your driver set FB_NONSTD_REV_PIX_IN_B?
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Hi Geert,
Den 22.01.2015 20:44, skrev Geert Uytterhoeven:
Quoted 16 lines
Hi Noralf,
Quoted 13 lines · Noralf Trønnes
I'm playing with a SSD1306 128x64 monochrome display and fbcon gives me mirrored fonts and some extra lines.
fbdev config:info->var.bits_per_pixel = 1; info->fix.visual = FB_VISUAL_MONO10; info->var.red.length = 1; info->var.red.offset = 0; info->var.green.length = 1; info->var.green.offset = 0; info->var.blue.length = 1; info->var.blue.offset = 0;Uses:
sys_fillrect,sys_copyarea,sys_imageblit(anddeferred_io)
Quoted 4 lines
Quoted 3 lines
System: Raspberry Pi, ARM, Linux 3.18.3
Does anyone see what this might be?
What's the value on
CONFIG_FB_CFB_REV_PIXELS_IN_BYTEin your .config?
$ zgrep CONFIG_FB_CFB_REV_PIXELS_IN_BYTE /proc/config.gz # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
Quoted 1 line
Does your driver set
FB_NONSTD_REV_PIX_IN_B?
No it doesn't. I also tried setting it now, with no effect:info->var.nonstd = FB_NONSTD_REV_PIX_IN_B;
Hi Noralf,
Quoted 21 lines · Noralf Trønnes
Den 22.01.2015 20:44, skrev Geert Uytterhoeven:
Quoted 14 lines · Noralf Trønnes
Quoted 13 lines
I'm playing with a SSD1306 128x64 monochrome display and fbcon gives me mirrored fonts and some extra lines.
fbdev config:info->var.bits_per_pixel = 1; info->fix.visual = FB_VISUAL_MONO10; info->var.red.length = 1; info->var.red.offset = 0; info->var.green.length = 1; info->var.green.offset = 0; info->var.blue.length = 1; info->var.blue.offset = 0;Uses:
sys_fillrect,sys_copyarea,sys_imageblit(anddeferred_io)Quoted 5 lines
Quoted 3 lines
System: Raspberry Pi, ARM, Linux 3.18.3
Does anyone see what this might be?
What's the value on
CONFIG_FB_CFB_REV_PIXELS_IN_BYTEin your .config?
Quoted 7 lines
$ zgrep CONFIG_FB_CFB_REV_PIXELS_IN_BYTE /proc/config.gz # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not setQuoted 1 line
Does your driver set
FB_NONSTD_REV_PIX_IN_B?No it doesn't. I also tried setting it now, with no effect:
info->var.nonstd=FB_NONSTD_REV_PIX_IN_B;
The latter only seems to matter if CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is set, so please try the config option first.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Den 22.01.2015 20:59, skrev Geert Uytterhoeven:
Quoted 22 lines
Hi Noralf,
Quoted 19 lines · Noralf Trønnes
Den 22.01.2015 20:44, skrev Geert Uytterhoeven:
Quoted 18 lines · Noralf Trønnes
Quoted 11 lines
I'm playing with a SSD1306 128x64 monochrome display and fbcon gives me mirrored fonts and some extra lines.
fbdev config:info->var.bits_per_pixel = 1; info->fix.visual = FB_VISUAL_MONO10; info->var.red.length = 1; info->var.red.offset = 0; info->var.green.length = 1; info->var.green.offset = 0; info->var.blue.length = 1; info->var.blue.offset = 0;Quoted 5 lines
Uses:
sys_fillrect,sys_copyarea,sys_imageblit(anddeferred_io)System: Raspberry Pi, ARM, Linux 3.18.3
Does anyone see what this might be?
What's the value on
CONFIG_FB_CFB_REV_PIXELS_IN_BYTEin your .config?
Quoted 8 lines
Quoted 6 lines
$ zgrep CONFIG_FB_CFB_REV_PIXELS_IN_BYTE /proc/config.gz # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not setQuoted 1 line
Does your driver set
FB_NONSTD_REV_PIX_IN_B?No it doesn't. I also tried setting it now, with no effect:
info->var.nonstd=FB_NONSTD_REV_PIX_IN_B;The latter only seems to matter if
CONFIG_FB_CFB_REV_PIXELS_IN_BYTEis set, so please try the config option first.
$ zgrep CONFIG_FB_CFB_REV_PIXELS_IN_BYTE /proc/config.gz CONFIG_FB_CFB_REV_PIXELS_IN_BYTE=y
$ dmesg [ 365.595787] nonstd = 2
It didn't change anything.
I looked up the code that is affected by this change, and only the cbf*.c files use the rev/swap/shift functions from fb_draw.h I use the sys_* modules not cbf*
In principle the driver is like fb_ssd1307. It copies the framebuffer to RAM in the LCD controller at deferred_io intervals.
Hi Noralf,
Quoted 23 lines · Noralf Trønnes
Den 22.01.2015 20:59, skrev Geert Uytterhoeven:
Quoted 10 lines · Noralf Trønnes
Quoted 9 lines
Den 22.01.2015 20:44, skrev Geert Uytterhoeven:
Quoted 4 lines
Quoted 2 lines · Noralf Trønnes
I'm playing with a SSD1306 128x64 monochrome display and fbcon gives me mirrored fonts and some extra lines.
$ zgrep CONFIG_FB_CFB_REV_PIXELS_IN_BYTE /proc/config.gz # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not setQuoted 7 lines
Quoted 4 lines
Quoted 1 line
Does your driver set
FB_NONSTD_REV_PIX_IN_B?No it doesn't. I also tried setting it now, with no effect:
info->var.nonstd=FB_NONSTD_REV_PIX_IN_B;The latter only seems to matter if
CONFIG_FB_CFB_REV_PIXELS_IN_BYTEis set, so please try the config option first.$ zgrep CONFIG_FB_CFB_REV_PIXELS_IN_BYTE /proc/config.gz CONFIG_FB_CFB_REV_PIXELS_IN_BYTE=y
Quoted 8 lines
$ dmesg [ 365.595787] nonstd = 2It didn't change anything.
I looked up the code that is affected by this change, and only the cbf*.c files use the rev/swap/shift functions from
fb_draw.h
I use the sys_* modules not cbf*
One more thing that's no longer in sync...
Ideally, the cfb* and sys* versions are identical, except that the former operates on MMIO, and the latter on RAM.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Den 22.01.2015 21:42, skrev Geert Uytterhoeven:
Quoted 25 lines
Hi Noralf,
Quoted 22 lines · Noralf Trønnes
Den 22.01.2015 20:59, skrev Geert Uytterhoeven:
Quoted 6 lines · Noralf Trønnes
Quoted 5 lines
Den 22.01.2015 20:44, skrev Geert Uytterhoeven:
Quoted 4 lines
Quoted 2 lines · Noralf Trønnes
I'm playing with a SSD1306 128x64 monochrome display and fbcon gives me mirrored fonts and some extra lines.
Quoted 8 lines
Quoted 6 lines
$ zgrep CONFIG_FB_CFB_REV_PIXELS_IN_BYTE /proc/config.gz # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not setQuoted 1 line
Does your driver set
FB_NONSTD_REV_PIX_IN_B?No it doesn't. I also tried setting it now, with no effect:
info->var.nonstd=FB_NONSTD_REV_PIX_IN_B;The latter only seems to matter if
CONFIG_FB_CFB_REV_PIXELS_IN_BYTEis set, so please try the config option first.$ zgrep CONFIG_FB_CFB_REV_PIXELS_IN_BYTE /proc/config.gz CONFIG_FB_CFB_REV_PIXELS_IN_BYTE=y$ dmesg [ 365.595787] nonstd = 2
Quoted 8 lines
Quoted 5 lines
It didn't change anything.
I looked up the code that is affected by this change, and only the cbf*.c files use the rev/swap/shift functions from
fb_draw.h
I use the sys_* modules not cbf*One more thing that's no longer in sync...
Ideally, the cfb* and sys* versions are identical, except that the former operates on MMIO, and the latter on RAM.
Ok, so I'm out of luck, unless I patch this up myself :-) (which didn't look very complicated btw, as you say they look very similar)
Thanks for your help.
Noralf.