Skip to contentSkip to conversation

fbcon gives mirrored fonts on monochrome display

DISCUSSION Noralf Trønnes 2 participants 7 messages Jan 22, 2015 Framebuffer layer

lore
Share & tools
lore
#0 lore raw

Hi,

I'm playing with a SSD1306 128x64 monochrome display and fbcon gives me mirrored fonts and some extra lines.
Running fbtest gives me the expected output.

fbtest dump: http://tronnes.org/downloads/fbtest.png

fbcon dump: http://tronnes.org/downloads/fbcon.png
The text should have been:
Raspbian GNU/Lin

raspberrypi logi

fbcon font:VGA8x8: http://tronnes.org/downloads/fbcon8x8.png

ProFont6x11 gives indecipherable text lines:
http://tronnes.org/downloads/fbcon6x11.png

fbdev config:
info->var.bits_per_pixel = 1;
info->fix.visual = FB_VISUAL_MONO10; info->var.red.length = 1;
info->var.red.offset = 0;
info->var.green.length = 1;
info->var.green.offset = 0;
info->var.blue.length = 1;
info->var.blue.offset = 0;
Uses: sys_fillrect, sys_copyarea, sys_imageblit (and deferred_io)

System: Raspberry Pi, ARM, Linux 3.18.3

Does anyone see what this might be?

Regards,
Noralf Trønnes

#1 lore raw

Hi Noralf,

Quoted 14 lines · Noralf Trønnes

I'm playing with a SSD1306 128x64 monochrome display and fbcon gives me mirrored fonts and some extra lines.

fbdev config:
info->var.bits_per_pixel = 1;
info->fix.visual = FB_VISUAL_MONO10; info->var.red.length = 1;
info->var.red.offset = 0;
info->var.green.length = 1;
info->var.green.offset = 0;
info->var.blue.length = 1;
info->var.blue.offset = 0;
Uses: sys_fillrect, sys_copyarea, sys_imageblit (and deferred_io)

Quoted 3 lines

System: Raspberry Pi, ARM, Linux 3.18.3

Does anyone see what this might be?

What's the value on CONFIG_FB_CFB_REV_PIXELS_IN_BYTE in your .config? Does your driver set FB_NONSTD_REV_PIX_IN_B?

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds

#2 lore raw
In reply to Noralf Trønnes

Hi Geert,

Den 22.01.2015 20:44, skrev Geert Uytterhoeven:

Quoted 16 lines

Hi Noralf,

Quoted 13 lines · Noralf Trønnes

I'm playing with a SSD1306 128x64 monochrome display and fbcon gives me mirrored fonts and some extra lines.
fbdev config:

   info->var.bits_per_pixel = 1;
   info->fix.visual = FB_VISUAL_MONO10;
   info->var.red.length = 1;
   info->var.red.offset = 0;
   info->var.green.length = 1;
   info->var.green.offset = 0;
   info->var.blue.length = 1;
   info->var.blue.offset = 0;

Uses: sys_fillrect, sys_copyarea, sys_imageblit (and deferred_io)

Quoted 4 lines
Quoted 3 lines

System: Raspberry Pi, ARM, Linux 3.18.3

Does anyone see what this might be?

What's the value on CONFIG_FB_CFB_REV_PIXELS_IN_BYTE in your .config?

$ zgrep CONFIG_FB_CFB_REV_PIXELS_IN_BYTE /proc/config.gz
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
Quoted 1 line

Does your driver set FB_NONSTD_REV_PIX_IN_B?

No it doesn't. I also tried setting it now, with no effect:
info->var.nonstd = FB_NONSTD_REV_PIX_IN_B;

#3 lore raw
In reply to Noralf Trønnes

Hi Noralf,

Quoted 21 lines · Noralf Trønnes

Den 22.01.2015 20:44, skrev Geert Uytterhoeven:

Quoted 14 lines · Noralf Trønnes
Quoted 13 lines

I'm playing with a SSD1306 128x64 monochrome display and fbcon gives me mirrored fonts and some extra lines.
fbdev config:

   info->var.bits_per_pixel = 1;
   info->fix.visual = FB_VISUAL_MONO10;
   info->var.red.length = 1;
   info->var.red.offset = 0;
   info->var.green.length = 1;
   info->var.green.offset = 0;
   info->var.blue.length = 1;
   info->var.blue.offset = 0;

Uses: sys_fillrect, sys_copyarea, sys_imageblit (and deferred_io)

Quoted 5 lines
Quoted 3 lines

System: Raspberry Pi, ARM, Linux 3.18.3

Does anyone see what this might be?

What's the value on CONFIG_FB_CFB_REV_PIXELS_IN_BYTE in your .config?

Quoted 7 lines
$ zgrep CONFIG_FB_CFB_REV_PIXELS_IN_BYTE /proc/config.gz
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
Quoted 1 line

Does your driver set FB_NONSTD_REV_PIX_IN_B?

No it doesn't. I also tried setting it now, with no effect:
info->var.nonstd = FB_NONSTD_REV_PIX_IN_B;

The latter only seems to matter if CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is set, so please try the config option first.

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds

#4 lore raw
In reply to Noralf Trønnes

Den 22.01.2015 20:59, skrev Geert Uytterhoeven:

Quoted 22 lines

Hi Noralf,

Quoted 19 lines · Noralf Trønnes

Den 22.01.2015 20:44, skrev Geert Uytterhoeven:

Quoted 18 lines · Noralf Trønnes
Quoted 11 lines

I'm playing with a SSD1306 128x64 monochrome display and fbcon gives me mirrored fonts and some extra lines.
fbdev config:

    info->var.bits_per_pixel = 1;
    info->fix.visual = FB_VISUAL_MONO10;
    info->var.red.length = 1;
    info->var.red.offset = 0;
    info->var.green.length = 1;
    info->var.green.offset = 0;
    info->var.blue.length = 1;
    info->var.blue.offset = 0;
Quoted 5 lines

Uses: sys_fillrect, sys_copyarea, sys_imageblit (and deferred_io)

System: Raspberry Pi, ARM, Linux 3.18.3

Does anyone see what this might be?

What's the value on CONFIG_FB_CFB_REV_PIXELS_IN_BYTE in your .config?

Quoted 8 lines
Quoted 6 lines
$ zgrep CONFIG_FB_CFB_REV_PIXELS_IN_BYTE /proc/config.gz
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
Quoted 1 line

Does your driver set FB_NONSTD_REV_PIX_IN_B?

No it doesn't. I also tried setting it now, with no effect:
info->var.nonstd = FB_NONSTD_REV_PIX_IN_B;

The latter only seems to matter if CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is set, so please try the config option first.

$ zgrep CONFIG_FB_CFB_REV_PIXELS_IN_BYTE /proc/config.gz
CONFIG_FB_CFB_REV_PIXELS_IN_BYTE=y
$ dmesg
[  365.595787]   nonstd = 2

It didn't change anything.

I looked up the code that is affected by this change, and only the cbf*.c files use the rev/swap/shift functions from fb_draw.h I use the sys_* modules not cbf*
In principle the driver is like fb_ssd1307. It copies the framebuffer to RAM in the LCD controller at deferred_io intervals.

#5 lore raw
In reply to Noralf Trønnes

Hi Noralf,

Quoted 23 lines · Noralf Trønnes

Den 22.01.2015 20:59, skrev Geert Uytterhoeven:

Quoted 10 lines · Noralf Trønnes
Quoted 9 lines

Den 22.01.2015 20:44, skrev Geert Uytterhoeven:

Quoted 4 lines
Quoted 2 lines · Noralf Trønnes

I'm playing with a SSD1306 128x64 monochrome display and fbcon gives me mirrored fonts and some extra lines.

$ zgrep CONFIG_FB_CFB_REV_PIXELS_IN_BYTE /proc/config.gz
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
Quoted 7 lines
Quoted 4 lines
Quoted 1 line

Does your driver set FB_NONSTD_REV_PIX_IN_B?

No it doesn't. I also tried setting it now, with no effect:
info->var.nonstd = FB_NONSTD_REV_PIX_IN_B;

The latter only seems to matter if CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is set, so please try the config option first.

$ zgrep CONFIG_FB_CFB_REV_PIXELS_IN_BYTE /proc/config.gz
CONFIG_FB_CFB_REV_PIXELS_IN_BYTE=y
Quoted 8 lines
$ dmesg
[  365.595787]   nonstd = 2

It didn't change anything.

I looked up the code that is affected by this change, and only the cbf*.c files use the rev/swap/shift functions from fb_draw.h
I use the sys_* modules not cbf*

One more thing that's no longer in sync...
Ideally, the cfb* and sys* versions are identical, except that the former operates on MMIO, and the latter on RAM.

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds

#6 lore raw
In reply to Noralf Trønnes

Den 22.01.2015 21:42, skrev Geert Uytterhoeven:

Quoted 25 lines

Hi Noralf,

Quoted 22 lines · Noralf Trønnes

Den 22.01.2015 20:59, skrev Geert Uytterhoeven:

Quoted 6 lines · Noralf Trønnes
Quoted 5 lines

Den 22.01.2015 20:44, skrev Geert Uytterhoeven:

Quoted 4 lines
Quoted 2 lines · Noralf Trønnes

I'm playing with a SSD1306 128x64 monochrome display and fbcon gives me mirrored fonts and some extra lines.

Quoted 8 lines
Quoted 6 lines
$ zgrep CONFIG_FB_CFB_REV_PIXELS_IN_BYTE /proc/config.gz
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
Quoted 1 line

Does your driver set FB_NONSTD_REV_PIX_IN_B?

No it doesn't. I also tried setting it now, with no effect:
info->var.nonstd = FB_NONSTD_REV_PIX_IN_B;

The latter only seems to matter if CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is set, so please try the config option first.

$ zgrep CONFIG_FB_CFB_REV_PIXELS_IN_BYTE /proc/config.gz
CONFIG_FB_CFB_REV_PIXELS_IN_BYTE=y
$ dmesg
[  365.595787]   nonstd = 2
Quoted 8 lines
Quoted 5 lines

It didn't change anything.

I looked up the code that is affected by this change, and only the cbf*.c files use the rev/swap/shift functions from fb_draw.h
I use the sys_* modules not cbf*

One more thing that's no longer in sync...
Ideally, the cfb* and sys* versions are identical, except that the former operates on MMIO, and the latter on RAM.

Ok, so I'm out of luck, unless I patch this up myself :-) (which didn't look very complicated btw, as you say they look very similar)

Thanks for your help.

Noralf.